Cationic starch as a precursor to prepare porous activated carbon for application in supercapacitor electrodes

Three activated carbons (ACs) for the electrodes of supercapacitor were prepared from cationic starch using KOH, ZnCl₂ and ZnCl₂/CO₂ activation. The BET surface area, pore volume and pore size distribution of the ACs were evaluated using density functional theory method, based on N₂ adsorption isotherms at 77 K. The surface morphology was characterized with SEM. Their electrochemical performance in prototype capacitors was determined by galvanostatic charge/discharge characteristics and cyclic voltammetry, and compared with that of a commercial AC, which was especially prepared for use in supercapacitors. The KOH-activated starch AC presented higher BET surface area (3332 m² g⁻¹) and larger pore volume (1.585 cm³ g⁻¹) than those of the others, and had a different surface morphology. When used for the electrodes of supercapacitors, it exhibited excellent capacitance characteristics in 30 wt% KOH aqueous electrolytes and showed a high specific capacitance of 238 F g⁻¹ at 370 mA g⁻¹, which was nearly twice that of the commercial AC.     

Influence of carbon structure on performance of electrode material for electric double-layer capacitor

An isotropic pitch and an anisotropic pitch with similar softening point were chosen to be precursors for activated carbons (ISO and ANISO, respectively). Chemical activations with same conditions were carried out and the effects of microstructure of precursors on characteristics of activated carbons were discussed. Isotropic pitch with more noncrystallite carbon atoms or edge carbon atoms on the microstructural defects had more reactive ability and more pores were manufactured through sufficient chemical activation. Electric double-layer capacitors (EDLC) were made with the two activated carbons as electrode materials and 1 M Et₄NBF₄/PC as the electrolyte. The performance of EDLC with the ISO has higher specific capacitance (43.5 F g⁻¹) than the ANISO (21.3 F g⁻¹) and has better power performance and lower resistance than the latter.     

Potato starch-based activated carbon spheres as electrode material for electrochemical capacitor

Potato starch-based activated carbon spheres (PACS) were prepared from potato starch by stabilization, carbonization followed by activation with KOH. The obtained PACS are hollow and retain the original morphology of potato starch with decrease in size, as shown by scanning electron microscopy. Modification of textural properties of the PACS was achieved by varying the carbonization temperature and the ratio of KOH/PCS. The results of N₂ adsorption isotherms indicate that the samples prepared are mainly microporous. The electrochemical behaviors of the hollow PACS were studied by galvanostatic charge-discharge, cyclic voltammetry, and impedance spectroscopy. The results indicate that high specific capacitance of 335 F/g is obtained at current density 50 mA/g for PACS with specific surface area 2342 m²/g. Only a slight decrease in capacitance, to 314 F/g, was observed when the current density increases to 1000 mA/g, indicating a stable electrochemical property.     

Study on the electrochemical behavior of vanadium nitride as a promising supercapacitor material

Vanadium nitride (VN) powder was synthesized by calcining V₂O₅ xerogel in a furnace under an anhydrous NH₃ atmosphere at 400 °C. The structure and surface morphology of the obtained VN powder were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The supercapacitive behavior of VN in 1 M KOH electrolyte was studied by means of cyclic voltammetry (CV), constant current charge-discharge cycling (CD) and electrochemical impedance spectroscopy (EIS). The XRD result indicates that the obtained VN belongs to the cubic crystal system (Fm3m [2 2 5]) with unit-cell parameter 4.15 Å. SEM images show the homogeneous surface of the obtained VN. The CV diagrams illustrate the existence of fast and reversible redox reactions on the surface of VN electrode. The specific capacitance of VN is 161 F g⁻¹ at 30 mV s⁻¹. Furthermore, the specific capacitance remains 70% of the original value when the scan rate increases from 30 to 300 mV s⁻¹. CD experiments show that VN is suitable for CD at high current density, and the slow and irreversible faradic reactions exist during the charge-discharge process of the VN electrode. The experimental results indicate that VN is a promising electrode material for electrochemical supercapacitors.     

Comparative study of electrochemical capacitance of multi-walled carbon nanotubes before and after chopping

In the work, short multi-walled carbon nanotubes (S-CNTs) were synthesized by chopping conventional μm-long multi-walled carbon nanotubes (L-CNTs) under ultrasonication in H₂SO₄/HNO₃ mixed acids. A comparative electrochemical investigation performed in 6 M KOH solution demonstrated that a specific capacitance (SC) of ca. 14.6 μF cm⁻² was delivered by the S-CNTs with the specific surface area (SSA) of 207 m² g⁻¹, much larger than that of ca. 10.1 μF cm⁻² for the L-CNTs with the SSA of 223 m² g⁻¹, the reason for which was that S-CNTs with two open ends, due to good ion penetrability, provided more entrances for electrolyte ions to access the inner surface easily through their shorter inner pathway so as to enhance their SSA utilization and geometric SC. The surface structure disruption of S-CNTs, owing to ultrasonication and oxidation during chopping process, deteriorated their electronic conductivity and resulted in an inferior power property in contrast to L-CNTs.     

Preparation and characterization of activated carbon produced from pomegranate seeds by ZnCl2 activation

In this study, pomegranate seeds, a by-product of fruit juice industry, were used as precursor for the preparation of activated carbon by chemical activation with ZnCl₂. The influence of process variables such as the carbonization temperature and the impregnation ratio on textural and chemical-surface properties of the activated carbons was studied. When using the 2.0 impregnation ratio at the carbonization temperature of 600 °C, the specific surface area of the resultant carbon is as high as 978.8 m² g⁻¹. The results showed that the surface area and total pore volume of the activated carbons at the lowest impregnation ratio and the carbonization temperature were achieved as high as 709.4 m² g⁻¹ and 0.329 cm³ g⁻¹. The surface area was strongly influenced by the impregnation ratio of activation reagent and the subsequent carbonization temperature.     

Electrodeposited ruthenium oxide thin films for supercapacitor: Effect of surface treatments

Amorphous and porous ruthenium oxide thin films have been deposited from aqueous Ru(III)Cl₃ solution on stainless steel substrates using electrodeposition method. Cyclic voltammetry study of a film showed a maximum specific capacitance of 650 F g⁻¹ in 0.5 M H₂SO₄ electrolyte. The surface treatments such as air annealing, anodization and ultrasonic weltering affected surface morphology. The supercapacitance of ruthenium oxide electrode is found to be dependent on the surface morphology.     

Hierarchically porous nanoflowers from TiO2–B nanosheets with ultrahigh surface area for advanced lithium-ion batteries

In this work, hierarchically porous TiO₂–B nanoflowers have been successfully synthesized via a facile solvothermal method followed by calcination treatment. The TiO₂–B nanoflowers are constructed by thin nanosheets, presenting ultrahigh specific surface area, up to 214.6 m² g⁻¹. As anode materials for Li-ion batteries, the TiO₂–B sample shows high reversible capacity, excellent cycling performance and superior rate capability. The specific capacity of TiO₂–B could remain over 285 mA h g⁻¹ at 1 C and 181 mA h g⁻¹ at 10 C rate after 100 cycles. We believe that the pseudocapacitive mechanism, ultrahigh surface area and scrupulous nanoarchitecture of the TiO₂–B are responsible for the enhancement of electrochemical properties.     

Graphene oxide with improved electrical conductivity for supercapacitor electrodes

Predominant few-layer graphene (FLG) sheets of high electrical conductivity have been synthesized by a multi-step intercalation and reduction method. The electrical conductivity of the as-synthesized FLG is measured to be ∼3.2 × 10⁴ S m⁻¹, comparable to that of pristine graphite. Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Raman analysis reveal that the as-synthesized FLG sheets have large areas with single and double layers. The specific capacitance of 180 F g⁻¹ is obtained for the FLG in a 1 M Na₂SO₄ aqueous electrolyte by integrating the cyclic voltammogram. The good capacitive behavior of the FLG is very promising for the application for next-generation high-performance electrochemical supercapacitors.     

Fabrication and application of highly ordered mesoporous Co3O4, NiO, and their metals

Highly ordered mesoporous Co₃O₄, NiO, and their metals were synthesized by nanocasting method using there corresponding mesoporous SBA-15 silica as a template. The obtained porous metal oxides have high surface areas, large pore volume, and a narrow pore size distribution. The N₂-adsorption data for mesoporous metal oxides have provided the BET area of 257.7 m² g⁻¹ and the total pore volume of 0.46 cm³ g⁻¹. The mesoporous metals were employed as a catalyst in the synthesis of (S)-3-pyrrolidinol from chiral (S)-4-chloro-3-hydroxybutyronitrile, and a high yield to (S)-3-pyrrolidinol-salt was obtained on the mesoporous Co metal catalyst.