Surface reactions of 2-iodopropane on GaAs(1 0 0)

The surface reactions of 2-iodopropane ((CH₃)₂CHI) on gallium-rich GaAs(1 0 0)-(4 × 1), was studied by temperature programmed desorption (TPD) and X-ray photoelectron spectroscopy (XPS). CH₃CHICH₃ adsorbs molecularly at 120 K but dissociates below room temperature to form chemisorbed 2-propyl ((CH₃)₂CH) and iodide (I) species. Thermal activation causes desorption of the molecular species at 240 K, and this occurs in competition with the further reactions of the (CH₃)₂CH and I chemisorbed species. Self-coupling of the (CH₃)₂CH results in the formation of 2,3-dimethylbutane ((CH₃)₂CH-CH(CH₃)₂) at 290 K. β-Hydride elimination in (CH₃)₂CH yields gaseous propene (CH₃CHCH₂) at 550 K while reductive elimination reactions of (CH₃)₂CH with surface hydrogen yields propane (CH₃CH₂CH₃) at 560 K. Recombinative desorption of the adsorbed hydrogen as H₂ also occurs at 560 K. We observe that the activation barrier to carbon-carbon bond formation with 2-propyls on GaAs(1 0 0) is much lower than that in our previous investigations involving ethyl and 1,1,1-trifluoroethyl species where the β-elimination process was more facile. The difference in the surface chemistry in the case of 2-propyl species is attributable to its rigid structure resulting from the bonding to the surface via the second carbon atom, which causes the methyl groups to be further away from the surface than in the case of linear ethyl and 1,1,1-trifluoroethyl species. The β-hydride and reductive elimination processes in the adsorbed 2-propyl species thus occurs at higher temperatures, and a consequence of this is that GaI desorption, which is expected to occur in the temperature range 550-560 K becomes suppressed, and the chemisorbed iodine leaves the surface as atomic iodine.     

Theoretical modeling of photocatalytic active species on illuminated TiO2

A theoretical study of the H₂O and O₂ adsorption on an illuminated TiO₂ anatase surface is presented. The electronic structure and the spin distribution were examined by employing the DFT formalism and the BHandHLYP functional. The adsorbates geometries were fully optimized, including the cluster relaxation. Our results show the dissociative adsorption of the H₂O molecule on the photoactivated TiO₂ (0 0 1) surface. This reaction produces one hydroxyl group with radical character (OH) and an unpaired electron localized in the 5c-Ti atom. In case of the O₂ molecule, the non-dissociative chemisorption was obtained. This molecule shows one unpaired electron and a negative charge. In these sense, the adsorbed O₂ acts as a superoxide species (O₂⁻).     

Preparation of visible-light responsive PF-codoped TiO2 nanotubes

Fabrication of PF-codoped TiO₂ nanotubes was carried out using a one-step electrochemical anodization process by tailoring the composition of the electrolyte with the aim of PF-codoping to extend the optical absorption of TiO₂ to the visible-light region. The as-prepared PF-codoped TiO₂ nanotubes were characterized by SEM, XPS, and UV-vis diffuse reflectance absorption spectra (DRS). The results showed that the tube diameter of the nanotubes was approximately 100 nm and the tube length was approximately 510 nm. The phosphorus and fluorine were successfully doped into TiO₂ nanotubes, as evidenced by XPS. Moreover, the PF-codoped samples displayed remarkably strong visible-light response.     

Chemiluminescence from NaClO-H2O2 and enhanced by l-cysteine capped Mn-doped ZnS quantum-dots

Water-soluble l-cysteine capped Mn-doped ZnS@Si quantum-dots (QDs), a kind of sensitizer, were synthesized. It was found that this sensitizer could enhance chemiluminescence (CL) signals emitted from interaction of NaClO with H₂O₂ in basic medium. The CL mechanism was studied experimentally by singlet oxygen (¹O₂) quenching method, UV-vis spectra, X-ray photoelectron spectra, transmission electron microscopy studies and ESR spin-trapping spectra. The results demonstrated that the CL enhancement of NaClO-H₂O₂ originate from the catalysis of the sensitizer, which catalyzed the decomposition of H₂O₂, producing reactive intermediates hydroxyl radical (OH) and superoxide anion (O₂⁻). Then the resulting OH reacted with O₂⁻ to form ¹O₂ and oxygen excimer species (¹O₂)₂^?, which rapidly returned to its ground state by passing its energy to the sensitizer through an electron-transfer process. Finally, the sensitizer being in excited state, returned to the ground state through enhanced CL-emission.     

Low temperature catalytic performance of nanosized TiNiO for oxidative dehydrogenation of propane to propene

Nanosized TiNiO catalysts prepared by a modified sol-gel method have been investigated in the oxidative dehydrogenation of propane (ODP) to propene. At 300 °C the yield to propene of 12.1% was obtained on 9.1 wt.% TiNiO catalyst with the selectivity of 43%. The continued variety of lattice parameter and variation of chemical value of nickel and titanium ion on the surface indicates that there are strong interactions of TiO₂ and NiO. The decreased low temperature oxygen desorption and the weaker reducibility seems to be responsible for the decreased activity and enhanced selectivity of propane oxidative dehydrogenation over TiNiO catalysts.     

Influence of thermal treatment of low dielectric constant SiOC(H) films using MTES/O2 deposited by PECVD

Low dielectric constant SiOC(H) films are deposited on p-type Si(100) substrates by plasma enhanced chemical vapor deposition (PECVD) using methyltriethoxysilane (MTES, C₇H₁₈O₃Si) and oxygen gas as precursors. The SiOC(H) films are deposited at room temperature, 100, 200, 300 and 400 °C and then annealed at 100, 200, 300 and 400 °C temperatures for 30 min in vacuum. The influence of deposition temperature and annealing on SiOC(H) films are investigated. Film thickness and refractive index are measured by field emission scanning electron microscopy and ellipsometry, respectively. Chemical bonding characteristics of as-deposited and annealed films are investigated by Fourier transform infrared (FTIR) spectroscopy in the absorbance mode. As more carbon atoms are incorporated into the SiOC(H) films, both film density and refractive index are decreased due to nano pore structure of the film. In the SiOC(H) film, CH₃ group as an end group is introduced into OSiO network, thereby reducing the density to decrease the dielectric constant thereof. The dielectric constant of SiOC(H) film is evaluated by C-V measurements using metal-insulator-semiconductor (MIS), Al/SiOC(H)/p-Si structure and it is found to be as low as 2.2 for annealed samples deposited at 400 °C.     

Preparation, characterization and visible-light photocatalytic activity of AgI/AgCl/TiO2

In this paper, a novel composite photocatalyst AgI/AgCl/TiO₂ was prepared by ion exchange method and characterized by XRD, SEM and UV-Vis spectrometry. The as-prepared AgI/AgCl/TiO₂ composites show much higher photocatalytic activity than AgCl/TiO₂ and AgI/TiO₂ under visible-light irradiation (λ > 400 nm) in the process of methyl orange (MO) degradation. When the molar percentage of AgI to initial AgCl is 20% (sample SE-20%), the maximal degradation efficiency of MO has reached 85.8% after irradiation for 120 min. The enhancement of photocatalytic activity of the composite photocatalyst AgI/AgCl/TiO₂ will be attributed to its good absorption in the visible-light region, especially low recombination rate of the electron-hole pairs based on the photoluminescence (PL) spectra investigation of AgI/AgCl/TiO₂ and the matching band structures of AgI, AgCl and TiO₂. The detection of reactive species by radical scavengers displays that O₂⁻ and H₂O₂ are the main reactive species for the degradation of MO under visible-light irradiation. Moreover, PL analysis by using terephthalic acid (TA) as a probe molecule further reveals that OH can be negligible for the degradation of MO.     

Improved optical response and photocatalysis for N-doped titanium oxide (TiO2) films prepared by oxidation of TiN

In order to improve the photocatalytic activity, N-doped titanium oxide (TiO₂) films were obtained by thermal oxidation of TiN films, which were prepared on Ti substrates by ion beam assisted deposition (IBAD). The dominating rutile TiO₂ phase was found in films after thermal oxidation. According to the results of X-ray photoelectron spectroscopy (XPS), the residual N atoms occupied O-atom sites in TiO₂ lattice to form TiON bonds. UV-vis spectra revealed the N-doped TiO₂ film had a red shift of absorption edge. The maximum red shift was assigned to the sample annealed at 750 °C, with an onset wavelength at 600 nm. The onset wavelength corresponded to the photon energy of 2.05 eV, which was nearly 1.0 eV below the band gap of pure rutile TiO₂. The effect of nitrogen was responsible for the enhancement of photoactivity of N-doped TiO₂ films in the range of visible light.     

Luminescence spectra of Eu ions and interstitial oxygen in PbWO4 crystal

The site-selective excitation and emission spectroscopy, and luminescence decay have been investigated under a pulsed, tunable, narrowband dye laser of the ⁵D₀→⁷F₀ region in the europium ions-doped lead tungstate PbWO₄ (PWO) in single crystal. In as-grown sample, the experimental results show that there is only one ⁷F₀→⁵D₀ excitation transition indicating the only one Eu³⁺ site in PbWO₄ lattices. The sequential annealing treatments were conducted to investigate the effects of oxygen components on the microstructure environments of Eu³⁺ in the lattices. The site distribution of Eu³⁺ was changed by the annealing in air atmosphere, which could create new sites in PWO lattices. Confirmation of interstitial oxygen and interpretations of charge compensation mechanism for the observed new sites were discussed in the context of site-selective excitation and emission spectra. The main Eu³⁺ site is related to the charge compensation by the [(Eu_Pb³⁺)-V″_Pb-(Eu_Pb³⁺)] complex; the other minor new sites after annealing are originated from [(Eu_Pb³⁺)-O″_i-(Eu_Pb³⁺)] defects. Emission spectra excited by 355-laser and RT-Raman spectra were also measured.     

Photodegradation of dye pollutants catalyzed by γ-Bi2MoO6 nanoplate under visible light irradiation

Nanoplate γ-Bi₂MoO₆ is prepared by hydrothermal method. Using this material as photocatalyst, rhodamine B and methylene blue were efficiently degraded under visible light irradiation. The degradation kinetics, total organic carbon changes, and electron spin resonance detection of active oxygen species were investigated to clarify the degradation process. The experimental results indicated that the target dyes could be facilely bleached and mineralized. The formation of active oxygen species of OH and O²⁻ is detected, and they are proposed to be responsible for the degradation of the target dyes. The γ-Bi₂MoO₆ catalyst is very stable and can be reused.     

Visible-light photocatalytic behavior of two different N-doped TiO2

The visible-light photocatalytic behavior of two different N-doped TiO₂ correlated with their physicochemical properties was investigated. The results show that N-TiO₂-1, prepared by a novel TiO₂ with unique defect structure, is more active in visible-light photocatalytic oxidation of C₃H₆ than N-TiO₂-2, prepared by standard P25-TiO₂ (Degussa). The specific rate constant of the former is ca. 5 times that of the latter. One model of photoactive center (V_o-NO-Ti) in anatase phase responsible for the visible-light photocatalytic activity is proposed. The higher the V_o-NO-Ti concentration is, the better the visible-light photocatalytic activity is.     

Chemisorption of 1,1-dichloroethene on the Si(1 1 1)-7 × 7 surface

Chemisorption of 1,1-dichloroethene (Cl₂CCH₂) to a Si(1 1 1)-7 × 7 surface was studied by means of X-ray photoelectron spectroscopy using synchrotron radiation, recording chlorine 2p and carbon 1s spectra. For carbon 1s, spectral assignment of the chemisorbed species is based on quantum chemical calculations of chemical shifts in model compounds.The results confirm the identity of covalently bonded 1-chlorovinyl (-CClCH₂) and vinylidene (CCH₂) adspecies. Upon chemisorption at room temperature it was found that about one-third of the molecules break one C-Cl bond while about two-thirds of the adsorbates break two C-Cl bonds. We do not, however, find evidence for isomerization of CCH₂ to di-bonded vinylene (-CHCH-).     

An XPS study of pulsed plasma polymerised allyl alcohol film growth on polyurethane

The growth of highly functionalised poly allyl alcohol films by pulsed plasma polymerisation of CH₂CHCH₂OH on biomedical grade polyurethane has been followed by X-ray photoelectron spectroscopy (XPS) and contact angle measurements. Film thickness is observed to increase approximately linearly with plasma modification time, suggesting a layer-by-layer growth mode of poly allyl alcohol. Water contact angle measurements reveal the change in the surface free energy of wetting decreases linearly with plasma modification up to the monolayer point after which a constant limiting value of −24 mJ m⁻² was attained. Films prepared at 20 W plasma power with a duty cycle of 10 μs:500 μs exhibit a high degree of hydroxyl (OH) retention with minimal fragmentation of the monomer observed. Increasing the plasma power up to 125 W is found to improve OH retention at the expense of ether formation generating films close to the monomer stoichiometry. Duty cycle plays an important role in controlling both film composition and thickness, with longer off times increasing OH retention, while longer on times enhance allyl alcohol film growth.     

Pre-treatments applied to oxidized aluminum surfaces to modify the interfacial bonding with bis-1,2-(triethoxysilyl)ethane (BTSE): Part I. High-purity Al with native oxide

A remote microwave-generated H₂ plasma and heating to 250 °C were separately used to modify high-purity oxidized aluminum surfaces and to assess whether these treatments can help enhance adhesion with bis-1,2-(triethoxysilyl)ethane (BTSE) coatings. Different initial oxide surfaces were considered, corresponding to the native oxide and to surfaces formed by the Forest Products Laboratory (FPL) treatment applied for either 15 or 60 min. BTSE is applied from solution at pH 4, and competing processes of etching, protonation (to form OH groups) and coupling (to form AlOSi interfacial bonds) occur at the solid-liquid interface. Scanning electron microscopy (SEM) was used to determine how the topographies of the modified Al surfaces changed with the different pre-treatments and with exposure to a buffer solution of pH 4. Secondary-ion mass spectrometry (SIMS) was used to determine the direct amount of AlOSi interfacial bonds by measuring the ratio of peak intensities 71-70 amu, while X-ray photoelectron spectroscopy (XPS) was used to determine the overall strength of the silane coating adhesion by measuring the Si 2p signals before and after application of an ultrasonic rinse to the coated sample. Measured Al 2p and O 1s spectra helped assess how the different pre-treatments modified the various Al oxidized surfaces prior to BTSE coating. Pre-treated samples that showed increased AlOSi bonding after BTSE coating corresponded to surfaces, which did not show evidence of significant etching after exposure to a pH 4 environment. This suggests that such surfaces are more receptive to the coupling reaction during exposure to the BTSE coating solution. These surfaces include all H₂ plasma-treated samples, the heated native oxide and the sample that only received the 15 min FPL treatment. In contrast, other surfaces that show evidence of etching in pH 4 environments are samples that received lower amounts of AlOSi interfacial bonding. Overall, heating improved the BTSE adhesive bonding for the native Al oxide, while H₂ plasma treatment improved the BTSE bonding for surfaces that had initially been FPL-treated for 15 and 60 min.     

Adsorption structure of phenylphosphonic acid on an alumina surface

The adsorption structure of phenylphosphonic acid (PPOA) on an alumina surface was investigated as a function of exposure and temperature using infrared reflected absorption spectroscopy (IRAS) and a Kelvin probe. The alumina surface was held at room temperature during deposition. At monolayer adsorption, PO and Phenyl-P bands are observed, which indicate the creation of POAl bonds. The aromatic ring plane is positioned perpendicular to the surface, i.e. deprotonated PPOA stands vertically on the surface. At multilayer adsorption, PO and POH bands appear in the spectra. The multilayer PPOA film starts to desorb at 400 K. From 400 to 700 K, the IRAS spectra are similar to the monolayer spectrum, indicating that the multilayer structure reverses to the monolayer-like PPOA adlayer by heating. The acid molecules start to desorb at 700 K.     

Electron paramagnetic resonance of gamma irradiated [(CH3)4N]InCl4 and [(CH3)4N]2CdCl4 single crystals

Gamma irradiated [(CH₃)₄N]InCl₄ and [(CH₃)₄N]₂CdCl₄ single crystals were investigated by electron paramagnetic resonance at ambient temperature, and it has been found that both compounds indicate the existence of (CH₃)₃N⁺ radicals. The g factors were found to be isotropic, and the hyperfine constant for H atoms was measured as 2.86 mT and is isotropic for this radical in these substances. The hyperfine coupling constant of the N nucleus with the hole in (CH₃)₃N⁺ in [(CH₃)₄N]InCl₄ was found to be anisotropic with the A_zz=2.92, A_yy=1.62 and A_xx=1.40 mT. From these, it has been revealed that the C_3v-axis of (CH₃)₃N⁺ radical performs rotational or jumping reorientational motions around a fixed axis, in addition to the rotations of protons in CH₃ groups and the rotational motions of CH₃ groups around the C_3v-axis of the radical. The g, and the hyperfine coupling factors of the N nucleus were isotropic in (CH₃)₃N⁺ in [(CH₃)₄N]₂CdCl₄. This indicates the motional behaviour of the radical in this compound is as in a liquid. This isotropic behaviour of the hyperfine coupling constants was found to be same until the attainable lowest temperature of 113 K in our laboratory.     

On the efficiency of water soluble antioxidants

The wide use of high intensity ultrasound (HIU) in modern medicine raises the question of bio-safety. It has been shown that the effect of HIU in biological media may have similarity to the effects of ionizing radiation. Exposure of biological media to HIU field may lead to cavitation phenomenon followed by formation of free radicals such as hydroxyl radical (OH) and the super-oxide ion (O₂-). These are highly reactive species that may cause harmful effects and induce oxidative stress. In the present study we employed electron spin resonance (ESR) spectroscopy together with spin traps to quantify the dynamics of hydroxyl radical formation during exposure to HIU field in the presence of different amounts of six antioxidants. Thus, the efficiency of water-soluble antioxidants, namely Allicin, Melatonin, Deoxyribose, Trolox, Nuphlutine and Hermidin, to suppress accumulation of OH radicals was examined. The results show that among the six, Trolox and Allicin reduce hydroxyl concentration with the highest efficiency.     

Reaction of acetonitrile with the silicon(0 0 1) surface: A combined XPS and FTIR study

The adsorption of acetonitrile on the Si(0 0 1) surface has been investigated using X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FTIR). XPS and FTIR spectra indicate that adsorbed acetonitrile forms two correlated binding configurations, a CN species with a strong FTIR absorption at 1540 cm⁻¹ and a CCN (ketenimine) species that has a very strong FTIR absorption at 1952 cm⁻¹. The CCN FTIR peak at 1952 cm⁻¹ shows a striking polarization dependence, with the infrared transition dipole almost entirely in the plane of the sample and parallel to the SiSi dimer axis. Our data suggests that the primary CCN structure results from cleavage of two C-H bonds, forming a structure in which the N and terminal C atom are both linked to the surface. Temperature-dependent experiments help to elucidate the complicated reaction mechanism for acetonitrile adsorbing onto the Si(0 0 1) surface. Dosing at higher temperature increases the amount of CCN relative to CN species while heating leads to direct transformation of the CN to the CCN species. Our results indicate that previous studies, which considered only products formed by cleavage of a single C-H bond, have misidentified the primary ketenimine product. A reinterpretation of the earlier results, combined with data presented here, sheds new light onto the products and mechanism of interaction of acetonitrile with Si(0 0 1).     

Mechanistic considerations for the degradation of methyl tert-butyl ether (MTBE) by sonolysis: effect of argon vs. oxygen saturated solutions

The ultrasonic degradation mechanism of methyl tert-butyl ether (MTBE) in aqueous solution is complex because of the competition between hydroxyl radical attack, pyrolysis, and hydrolysis reactions. A detailed investigation of degradation pathways using sonolysis has been performed using reaction byproducts identification. The observed bi-product distributions are rationalized in terms of hydroxyl radical (OH) mediated processes and pyrolysis. The role of oxygen mediated and pyrolytic pathways were assessed using O₂ and Ar saturated solutions. Chemical destruction by sonolysis is often rationalized using hydroxyl radical chemistry. Pyrolysis is unique to this advanced oxidation process, and is important in the case of MTBE because it transfers into the cavitating bubbles. While α-hydrogen abstraction by OH and low temperature pyrolysis was important, it was also shown that β-hydrogen abstraction leads, in some cases, to the same reaction byproducts, which emphasized the importance of α-hydrogen abstraction. High temperature pyrolysis resulted in minor degradation reactions based on the formation of reaction by-products.