Dextran‐Coated Antiferromagnetic MnO Nanoparticles for a T1‐MRI Contrast Agent with High Colloidal Stability

A simple approach to synthesize carboxymethyl dextran‐coated MnO nanoparticles (CMDex‐MnONPs) with high colloidal stability in physiological saline solutions is described here for potential applications as a magnetic resonance imaging (MRI) T₁ contrast agent. The thermal decomposition methodology is used to produce uniform MnONPs with an average size of around 20 nm, and its hydrophobic surface is modified with CMDex molecules, conferring hydrophilic properties. After CMDex coating, the nanoparticle presents high colloidal stability in concentrations ranging from 10 to 50 μg mL^?1, average hydrodynamic size (Z‐average) of 130 nm, polydispersity degree of ≈12%, and negative surface charge in both simulated body fluid solutions and pure water with zeta‐potential of –20 and –40 mV, respectively. The CMDex‐MnONPs with 20 nm show antiferromagnetic behavior at room temperature, and the magnetic properties are found to be strongly dependent of the nanoparticle size, increasing the contribution of the ferromagnetic Mn₃O₄ phase with decreasing size for nanoparticles about 3 nm. Cytotoxicity evaluation in cancerous and noncancerous cells in the range of 5.0–50.0 μg mL^?1 shows low toxicity for cancerous cells and lack of the same for healthy cells lines. Related to the magnetic properties, CMDex‐MnONP presents significant r₁ relaxivity and low r₂/r₁ relaxivity ratio. The results suggest that these nanoparticles display characteristics for potential applications as an MRI T₁ contrast agent.     

Investigations of Pulse‐Plasma‐Polymer Coating on TiO2 Nanoparticles and Their Dispersion

An amorphous acrylic acid (AA) polymer coating was generated on TiO₂ nanoparticles through pulse radio frequency (RF) plasma polymerization. The AA plasma synthesis mechanism was studied by its optical emission spectrum. The chemical structures of AA–plasma‐polymer were carefully investigated by Fourier transform infrared spectroscopy (FTIR). The dispersion behaviors of AA‐coated and uncoated TiO₂ nanoparticles in glycol solution were characterized by ultraviolet absorbency and particle size distribution measurements. The results showed that the aggregation of TiO₂ nanoparticles in glycol solution was effectively lowered and the dispersion was improved a lot after AA–plasma‐polymer coating. The pulse plasma coating parameters played an important role in the dispersion enhancement of TiO₂ nanoparticles. By properly regulating the pulse discharge parameters, the system could gain the highest radical–monomer reactions rate, the most compatible functional groups on the nanoparticles, and the best dispersion in the background media.     

Preparation of copper–silicon dioxide nanoparticles with chemical vapor synthesis

Atmospheric pressure chemical vapor synthesis was used to produce copper nanoparticle composites in an amorphous silicon dioxide, i.e., either copper nanoparticles coated with amorphous silicon dioxide or copper nanoparticles embedded in amorphous silicon dioxide matrix. Synthesized metal–organic copper(I) complex was used as a precursor that provided well-defined ratio (1:2) of copper and silicon. The thermal decomposition of the Cu(I) complex molecule leads to homogenous nucleation and formation of copper nanoparticles which are subsequently coated with Si/SiO₂ in the gas phase. The decomposition was greatly enhanced when reductive atmosphere, i.e., H₂/N₂ 10 v% were used instead of pure nitrogen. A narrow size distribution with the geometric mean diameter of the particle agglomerates around 30 nm was observed while the primary size of the copper core particles was around 5 nm.     

Size-dependent spin-reorientation transition in Nd2Fe14B nanoparticles

It is well known that some ferromagnetic properties like Curie temperature are size dependent. In this Letter we will report that the spin-reorientation temperature of Nd₂Fe₁₄B material is also size dependent. By using a surfactant-assisted ball milling technique, Nd₂Fe₁₄B nanoparticles with different size about 6, 20 and 300 nm were successfully obtained. Spin-reorientation transition temperature of the NdFeB nanoparticles was then determined by measuring the temperature dependence of DC and AC magnetic susceptibility. It was revealed that the spin-reorientation transition temperature (Tsr) of the nanoparticles is strongly size dependent. Tsr of the 300 nm particles is lower than that of the bulk raw material while the Tsr of the 20 nm particles is significantly lower than that for the 300 nm particles. The physics behind this size dependence is discussed.     

Multiferroic and exchange bias in La0.85Sr0.15FeO3−δ perovskite nanoparticles

Multiferroic and exchange bias was observed in La_0.85Sr_0.15FeO_3?δ nanoparticles sample which was prepared by co-precipitation method. These nanoparticles have an average size of about 18.49?nm and orthorhombic phase (Pbnm) with small impurities. The anomalous peaks of the dielectric as a function of temperature indicate that the Neel temperature at T_N?=?321?K and a ferroelectric to paraelectric transition at T_C?=?555?K which confirmed by differential scanning calorimetric (DSC). The dielectric response at low frequency is dominated by Debye relaxation behaviour and the resonance behaviour is dominated above 1.7?GHz. Mössbauer spectrum revealed the presence of magnetic ordering temperature (T_N) lies above room temperature (RT). Moreover, the oxygen deficient (δ?=?0.038) was calculated from Mössbauer spectrum. The hysteresis loop (B-H) of the nanoparticle sample exhibits exchange bias as a result of the exchange coupling at the interface between the ferromagnetic surface with canted spins and the antiferromagnetic core of the particles.     

Surface effects in maghemite nanoparticles

A consistent model is presented for the variation of saturation magnetization with particle size in maghemite nanoparticles, based on the existence of a magnetically disordered layer with a constant thickness of 1 nm. For particles smaller than 3 nm, layer thickness increases rapidly, and M_S is already zero for 2.5 nm particle size. Magnetization measurements have been performed on maghemite–polymer nanocomposites with low size dispersion and a regular distribution of particles in the matrix. A representative number of samples have been studied with a diameter size in the range from 1.5 to 15 nm and ±10% of size dispersion.     

Characterization of size, surface charge, and agglomeration state of nanoparticle dispersions for toxicological studies

Characterizing the state of nanoparticles (such as size, surface charge, and degree of agglomeration) in aqueous suspensions and understanding the parameters that affect this state are imperative for toxicity investigations. In this study, the role of important factors such as solution ionic strength, pH, and particle surface chemistry that control nanoparticle dispersion was examined. The size and zeta potential of four TiO₂ and three quantum dot samples dispersed in different solutions (including one physiological medium) were characterized. For 15 nm TiO₂ dispersions, the increase of ionic strength from 0.001 M to 0.1 M led to a 50-fold increase in the hydrodynamic diameter, and the variation of pH resulted in significant change of particle surface charge and the hydrodynamic size. It was shown that both adsorbing multiply charged ions (e.g., pyrophosphate ions) onto the TiO₂ nanoparticle surface and coating quantum dot nanocrystals with polymers (e.g., polyethylene glycol) suppressed agglomeration and stabilized the dispersions. DLVO theory was used to qualitatively understand nanoparticle dispersion stability. A methodology using different ultrasonication techniques (bath and probe) was developed to distinguish agglomerates from aggregates (strong bonds), and to estimate the extent of particle agglomeration. Probe ultrasonication performed better than bath ultrasonication in dispersing TiO₂ agglomerates when the stabilizing agent sodium pyrophosphate was used. Commercially available Degussa P25 and in-house synthesized TiO₂ nanoparticles were used to demonstrate identification of aggregated and agglomerated samples.     

Ultrasmall iron oxide nanoparticles: Magnetic and NMR relaxometric properties

Ultrasmall iron oxide (USPIO) nanoparticles, with diameter mostly less than 3 nm dispersed in an organic carrier fluid were synthesized by polyol route. The evolution of ZFC-FC magnetization curves with temperature, as well as the shift of the ac susceptibility peaks upon changing the frequency, reveal that the nanoparticles in the fluid are non-interacting and superparamagnetic with the blocking temperature T_B ∼10 K. The Mössbauer spectra analysis proposed the core/shell structure of the nanoparticles consisting of stoichiometric γ-Fe₂O₃ core and non-stoichiometric shell. The nanoparticle surface layer has a great influence on their properties which is principally manifested in significant reduction of the magnetization and in a large increase in magnetic anisotropy. Magnetic moments do not saturate in fields up to 5 T, even at the lowest measured temperature, T = 5 K. The average magnetic particle diameter is changed from 1.3 to 1.8 nm with increasing magnetic field from 0 to 5 T which is noticeably smaller than the particle sizes measured by TEM. The estimated effective magnetic anisotropy constant value, K_eff = 2 × 10⁵ J/m³, is two orders of magnitude higher than in the bulk maghemite. Measurements of the longitudinal and transverse NMR relaxivity parameters on water diluted nanoparticle dispersions at 1.5 T gave the values r₁ = 0.028 mmol⁻¹ s⁻¹, r₂ = 0.050 mmol⁻¹ s⁻¹ and their ratio r₂/r₁ = 1.8. Continuous increase of the T₁-weighted MRI signal intensity with increasing Fe concentration in the nanoparticle dispersions was observed which makes this ferrofluid to behave as a positive T₁ contrast agent.     

Synthesis of core–shell nanoparticles with a Pt nanoparticle core and a silica shell

A method to prepare a core–shell structure consisting of a Pt metal core coated with a silica shell (Pt(in)SiO₂) is described herein. A silica shell was grown on poly(vinylpyrrolidone) (PVP)-stabilized Pt nanoparticles 2–3 nm in size through hydrolysis and condensation reactions of tetraethyl orthosilicate (TEOS) in a water/ethanol mixture with ammonia as a catalyst. This process requires precise control of the reaction conditions to avoid the formation of silica particles containing multiple Pt cores and core-free silica. The length of PVP molecules, water content, concentration of ammonia and Pt nanoparticles in solution were found to significantly influence the core–shell structure. By optimizing these parameters, it was possible to prepare core–shell particles each containing a single Pt nanoparticle with a silica layer coating approximately 10 nm thick.     

Formation of superconductivity through interparticle interactions in ferrimagnetic-like Sn nanoparticle assemblies

We report on the observation of the development of superconductivity through interparticle interactions in 3, 5, 7, and 23 nm ferrimagnetic-like Sn nanoparticle assemblies. The Sn nanoparticles are fabricated using the gas condensation method. Each sample consists of a macroscopic amount of individual Sn nanoparticles without a capping molecule. Ferrimagnetism is found but no sign of superconductivity can be detected when the 3 nm particles are very loosely assembled. A reduction in the mean particle moment results when the packing fraction of the assembly is increased. Superconductivity occurs when a critical packing fraction is reached. Beyond this, the superconducting transition temperature T _C continues to increase and noticeably exceeds that of the bulk T _C. The enhancement of superconductivity by interparticle interactions has also been observed in 5, 7, and 23 nm particle assemblies, with the effect becoming less significant in larger particles. We attribute these observations to the transfer of electrons between the surface and the core regions of the nanoparticles triggered by finite size effects and interparticle interactions.     

Nanoparticles of: Synthesis and superparamagnetic properties

By using oil in water micelles, cobalt ferrite particles having an average diameter around 3 nm were synthetised. These nanoparticles are characterized by the presence of cation vacancies and no Fe(II) is observed, as it has been described in literature previously. Chemical interfacial treatment allows to coat the particles with citrate derivatives. The magnetic properties of uncoated and coated particles strongly diluted in a polymer substrate are compared by magnetization measurements and ⁵⁷Fe M?ssbauer spectroscopy. The anisotropy constant is shown to be independent of coating, whereas the magnetization is found to be larger in the uncoated particles. Received 3 February 1998     

Effect of pH, citrate treatment and silane-coupling agent concentration on the magnetic, structural and surface properties of functionalized silica-coated iron oxide nanocomposite particles

Superparamagnetic iron oxide nanoparticles were synthesized by coprecipitation of iron chloride salts at various pH values (9, 10, 11 and12) that were adjusted using an ammonia solution. Increasing the pH from 9 to 12 led to decreases in the size of iron oxide nanoparticles from 7.9±1.4 to 5±0.6 nm and the saturation magnetization (M_s) from 82.73 to 67.14 emu/g, respectively, when analyzed with transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM). X-ray diffraction patterns as well as M_s values showed that magnetite is the dominantly synthesized phase in the examined pH values. Unmodified iron oxide nanoparticles were coated with silica via the hydrolysis and condensation of tetraethyl orthosilicate (TEOS), designated P1 particles. The size distribution diagram of P1 particles showed two regions with mean sizes of 143.3±15.4 and 216.9±13.7 nm corresponding to silica and iron oxide@silica particles, respectively. Stabilization of iron oxide nanoparticles using sodium citrate prior to coating with silica (P2 particles) resulted in nanocomposites with a mean size of 275±16.1 nm and an M_s value of 2.9 emu/g. Subsequently, the surface of P2 particles was functionalized by amine groups using N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (EDS). Results obtained from the measurement of zeta potential revealed that the highest value of isoelectric point (PI) change, indicating a more efficient surface functionalization, occurs when the EDS concentration of 90 mM is used, as compared to that for particles aminated using 25 and 180 mM EDS.     

Ag2O nanoparticle clusters coated with porous gelatin-g-PMMA copolymer

Herein a special nanoparticle cluster coated with a porous copolymer is designed and prepared. At first, Ag₂O nanoparticles (secondary particles) were fabricated in gelatin solution by a facile chemical approach. Then these nanoparticles were entrapped in a copolymerization system containing gelatin, methyl methacrylate (MMA), an initiator, and using water as a solvent. The nanoparticle clusters coated with porous gelatin-g-PMMA copolymer (Ag₂O/gelatin-g-PMMA) were prepared by grafting methyl methacrylate onto gelatin, followed by coating solidification. One significant feature for our approach is that every Ag₂O aggregated cluster has been coated with porous gelatin-g-PMMA copolymer film in a unique way, and the Ag₂O nanoparticle could penetrate and escape from the coating freely in water by ultrasonication. As a result, this study provides a new approach to prepare monodispersed nanoparticles by ordered porous copolymers with controlled releasing.     

Enhanced photoluminescence of ZnO-SiO2 nanocomposite particles and the analyses of structure and composition

Stable blue-green photoluminescent ZnO-SiO₂ nanocomposite particles exhibiting quantum efficiency as high as 34.8% under excitation at 360 nm were prepared using a spray-drying process from a feed solution that contained both luminescent ZnO nanoparticles synthesized by a sol-gel method and commercially-available SiO₂ nanoparticles. The effects of silica nanoparticle size and SiO₂-to-ZnO concentration ratio on the PL properties of the composite particles were investigated. The internal structure and chemical composition were investigated in detail using elemental mapping, which revealed that ZnO nanoparticles were well-dispersed within silica nanoparticle matrix. At a LiOH concentration of 0.23 M, the predicted ZnO crystallite diameter before and after spray drying was approximately constant at 3.3 and 3.6 nm, respectively. This result indicates that ZnO particle growth was inhibited and therefore the PL property of ZnO nanoparticles was stably preserved in the composite.     

Discrepancy between different estimates of the hydrodynamic diameter of polymer-coated iron oxide nanoparticles in solution

We have synthesized iron oxide nanoparticles coated with a monolayer of dextran, with molecular weights of the polymer between 5 and 670 kDa. Transmission electron microscopy images confirm that the hard core has a crystalline diameter of approximately 12 nm. The hydrodynamic diameters of these coated nanoparticles in solution measured using dynamical light scattering and estimated from magnetic susceptibility studies vary from near 90 nm for the lightest polymer to 140 nm for the heaviest polymer. Conversely, fluorescence correlation spectroscopy measurements yield a diameter of approximately 55 nm for the 15?C20 kDa dextran coated nanoparticles, which is consistent with the expected value estimated from the sum of the hard-core diameter and monolayer dextran coating. We discuss the implications of this discrepancy for applications involving polymer-coated magnetic nanoparticles.     

Molecular dynamics investigation of the size effect upon the β → α transformation in Zr nanocrystals

The stability of the β phase in cubic zirconium nanoparticles has been calculated as a function of the size r (r varies in the range from 2.5 to 11.5 nm) by the molecular dynamics method with the many-body interatomic interaction potential obtained within the embedded-atom model. It has been demonstrated that the temperature T _k at which the cubic cluster of body-centered cubic zirconium becomes structurally unstable depends nonlinearly on the particle size. The curve T _k (r) exhibits a pronounced maximum in the range r ≈ 4.3−4.7 nm. It has been established that the mechanism of the structural transition from the body-centered cubic phase to the hexagonal close-packed phase depends substantially on the particle size. For particles with sizes in the range from 2.5 to 5.0 nm, there exists a temperature range in which the transition from the body-centered cubic phase to the hexagonal close-packed phase remains incomplete for a long time. In this case, two phases coexist and the initial particle undergoes a strong deformation along the habit plane.     

Fabrication of a nanostructured gold-polymer composite material

A facile synthesis route is described for the preparation of a poly-(o-aminophenol)-gold nanoparticle composite material by polymerization of o-aminophenol (AP) monomer using HAuCl₄ as the oxidant. The synthesis was carried out in a methanol medium so that it could serve a dual solvent role, a solvent for both the AP and the water solution of HAuCl₄. It was found that oxidative polymerization of AP leads to the formation of poly-AP with a diameter of 50±10nm, while the reduction of AuCl₄ ^- results in the formation of gold nanoparticles (∼ 2nm). The gold nanoparticles were uniformly dispersed and highly stabilized throughout the macromolecular chain that formed a uniform metal-polymer composite material. The resultant composite material was characterized by means of different techniques, such as UV-vis, IR and Raman spectroscopy, which offered the information about the chemical structure of polymer, whereas electron microscopy images provided information regarding the morphology of the composite material and the distribution of the metal particles in the composite material.     

Optical Properties of CdS–PVA Nanocomposites

Semiconductor–polymer nanocomposites, with good control over the nanoparticle size and their dispersion within the polymer matrix, can have applications in many optical and luminescent display devices. Cadmium sulphide (CdS) is the most popular semiconductor nanoparticle exhibiting size dependent properties due to its large exciton binding energy and its suitability for large scale production. The nanoparticles need to be passivated against aggregation with suitable capping agents, without sacrificing the desirable properties like transparency and flexibility of the polymer. Cadmium sulphide nanoparticles capped with polyvinyl pyrrolidone (PVP) are synthesized using cadmium nitrate (Cd(NO₃)₂) and hydrogen sulphide (H₂S) as Cd²⁺ and S^2– sources, respectively. CdS particles with sizes in the range of 5–6 nm are prepared in methanol and the solvent is removed using a rotary evaporator. CdS powder is dispersed in polyvinyl alcohol (PVA) solution with dimethyl formamide (DMF) as solvent to get (PVP–CdS)–PVA nanocomposite film of about 0.2 mm thickness. This has been characterized by powder X-ray diffraction (XRD), optical absorption studies, transmission electron microscopy (TEM), differential scanning calorimetry (DSC) and photoluminescence (PL). Particle size does not change due to incorporation in the polymer matrix and the polymer retains its transparency and flexibility. The nanocomposite shows good photoluminescence property with stronger band edge emission than defect related emission. The latter could be quenched completely by optimizing the PVP content. Irradiation of the nanocomposite with 8 MeV electrons at a dose of 100 kGy could effectively quench the defect related emission.     

Synthesis and characterization of carbon coated nanoparticles produced by a continuous low-pressure plasma process

Core–shell nanoparticles coated with carbon have been synthesized in a single chamber using a continuous and entirely low-pressure plasma-based process. Nanoparticles are formed in an argon plasma using iron pentacarbonyl Fe(CO)₅ as a precursor. These particles are trapped in a pure argon plasma by shutting off the precursor and then coated with carbon by passing acetylene along with argon as the main background gas. Characterization of the particles was carried out using TEM for morphology, XPS for elemental composition and PPMS for magnetic properties. Iron nanoparticles obtained were a mixture of FeO and Fe₃O₄. TEM analysis shows an average size of 7–14 nm for uncoated particles and 15–24 nm for coated particles. The effect of the carbon coating on magnetic properties of the nanoparticles is studied in detail.     

Effect of HPC and Water Concentration on the Evolution of Size,Aggregation and Crystallization of Sol-gel Nano Zirconia

Nano-sized zirconia (ZrO₂) powder is synthesized using sol-gel technique involving hydrolysis and condensation of zirconium(IV) n-propoxide in an alcohol solution, utilizing hydroxypropyl cellulose (HPC) polymer as a steric stabilizer. It is demonstrated that ZrO₂ nanoparticle size can be reduced using high R-value (defined as the ratio of molar concentrations of water and alkoxide). It is also shown that ZrO₂ nanoparticle size can be reduced further by synthesizing these particles in the presence of HPC polymer. The agglomeration tendency of ZrO₂ nanoparticles is demonstrated to decrease due to the steric hindrance created by the adsorbed polymer. The nanocrystallite size and their 'hard-aggregates' formation tendency are observed to affect the high temperature metastable tetragonal phase stabilization at room temperature within ZrO₂ particles.