同时发射和接收纵波和横波的压电复合材料换能器

通过控制压电复合材料中压电相的分布形式，本文具有在百度模振动的１－３型压电复合材料和具有扭转模振动的拼接２－２型压电复合材料组合在一起，构成一种混俣模式压电材料，并测试了这种压电材料晶片的性能参数，使用这种晶片作的换能器可以根据使用者的要求，单独产生纵波或横波，也可同时产生这两种波。     

压电复合材料宽带横波换能器的实验研究

本文用实验方法研究了２－２压电复合材料的厚度切变特性，定性地给出了２－２压电复合材料的性能与ＰＺＴ相体积百分比，以及与共振频率牟关系。并用这种材料作为换能元件，制作出高灵敏度窄脉冲横波换能器。     

面切变压电复合材料及其换能器

本文通过控制压电相在压复合材料中的分布工，把四块完全相同的等腰直角三角形２－２型压电复合拼材料拼接起来，四个直角顶点位于晶片的中心，     

压电复合材料换能器

压电复合材料是将压电陶瓷与聚合物材料按一定的连通方式、一定的体积百分比和一定的空间分布复合而成的。它可以提高材料的某些压电性能,并具有常用压电陶瓷材料所没有的某些优良性能。在过去的十几年中材料研究者们做了大量工作并取得实用性进展。     

扭转压电复合材料及其应用

本文描述了轴向－切向连通的圆柱２－２型压电复合材料。用ＰＺＴ／环氧树脂制作的普通２－２型压电复合材料可拼接成一种具有扭转振动的压电复合材料。这种压电复合材料和为圆柱２－２型压电复合材料的近似。本文还给出两组这种拼接型压电材料晶片的参数，用这种压电材料制作了产生扭转振动的换能器，测试了换能器的波形，频谱特性和偏振特性，指出了使用适当的高通滤波器可以抑制横波中的径向模，分析了接收波列中纵波抑制较强的原     

检测超声换能器用1-3型压电PZT/环氧复合材料及换能器的研究

本文介绍了一种制做1—3型压电 PZT/环氧复合材料的新方法.此方法采用了PZT小柱非周期性均匀分布,有效地消除了由于PZT小柱周期性分布而产生的有害横向结构共振模式,获得了振动模式较单纯的1—3型压电复合材料晶片,研制出宽带(低Q)换能器及高斯型换能器.     

1-3型压电复合材料非均匀振动换能器的研究

通过调整１－３型压电复合材料换能器中压电相的分布，可以控制换能器辐射面上振动幅度和相位的分布，从而获得具有特殊性能的声场。     

1-3型压电复合材料

1－3型压电复合材料是目前研究和应用得比较广泛的一种压电材料．本文简述了这种压电复合材料的理论模型、制作方法和实验结果；指出除了圆形PZT压电材料所具有的径向模和厚度模以外，1－3型压电复合材料还具有横向结构模．本文介绍了这种压电复合材料的特点，如低声阻抗、低介电常数、高静水压压电常数以及PZT相分布的可控制性等．这些特点有利于改善压电复合材料换能器的时间响应和空间响应．     

横波换能器的研制

本文从压电介质的基本方程出发,推导了厚度切变模横波换能器的梅森等效电路。进一步得出了适于工程应用的等效电路。介绍了有关晶片电弹常数的测量原理和换能器的研制工艺。     

面切变压电复合材料及其换能器

本文通过控制压电相在压电复合材料中的分布形式，把四块完全相同的等腰直角王角形2－2型压电复合材料拼接起来，四个直角顶点位于晶片的中心，相邻块压电相的极化方向相对．这种新型材料可产生面切变振动，其换能器可辐射面切变波．波列中的纵波具有伴随性且其首波位相与面切变波首波位相相反     

Evaluation of the piezoelectric behaviour produced by a thick-film transducer using digital speckle pattern interferometry

This paper presents an interferometric measurement of the out-of-plane deflections produced by a piezoelectric transducer, manufactured by thick-film deposition of a ceramic paste over an alumina substrate, when is subjected to a DC electric voltage. It is shown that a digital speckle pattern interferometer with an incorporated phase-shifting facility allows the measurement of nanometer displacements generated by the piezoelectric device. These measurements are used to evaluate the effective piezoelectric charge constant along the polarization direction (d₃₃)_eff that characterizes the thick-film transducer.     

Computational and experimental investigation of the fields generated by a 1-3 piezocomposite transducer

Large-scale three-dimensional numerical simulations using the finite-difference time domain technique are used to compute the continuous wave fields associated with a composite transducer. The interior of the transducer is made of a periodic array of square rods. This lattice causes elastic wave Bragg diffraction similar to electrons in a periodic lattice. A low frequency mode shape is assumed for the rods. This prescribed motion includes longitudinal and transverse components. It is shown that the transverse motion in the rod gives rise to shear waves causing standing waves (lateral resonances) in the polymer regions. This is also confirmed by experimental results presented here and other independent analytical and experimental work. The full-scale numerical simulation is performed on a large parallel supercomputer and permits modeling of not only the composite transducer but the radiated pressure from near to far field. In addition, cover plates and edge effects are included, unlike analytical treatments. Although only mechanical effects are included, the wave propagation approach captures many essential features.     

Investigation of dental samples using a 35MHz focussed ultrasound piezocomposite transducer

Dental erosion and decay are increasingly prevalent but as yet there is no quantitative monitoring tool. Such a tool would allow earlier diagnosis and treatment and ultimately the prevention of more serious disease and pain. Despite ultrasound having been demonstrated as a method of probing the internal structures of teeth more than 40 years ago, development of a clinical tool has been slow. The aim of the study reported here was to investigate the use of a novel high frequency ultrasound transducer and validate it using a known dental technique.A tooth extracted for clinical reasons was sectioned to provide a sample that contained an enamel and dentine layer such that the enamel-dentine junction (EDJ) was of a varying depth. The sample was then submerged in water and a B-scan recorded using a custom-designed piezocomposite ultrasound transducer with a centre frequency of 35 MHz and a −6 dB bandwidth of 24 MHz.The transducer has an axial resolution of 180 μm and a spatial resolution of 110 μm, a significant advance on previous work using lower frequencies. The depth of the EDJ was measured from the resulting data set and compared to measurements from the sequential grinding and imaging (SGI) method.The B-scan showed that the EDJ was of varying depth. Subsequently, the EDJ measurements were found to have a correlation of 0.89 (p < 0.01) against the SGI measurements. The results indicate that high frequency ultrasound is capable of measuring enamel thickness to an accuracy of within 10% of the total enamel thickness, whereas currently there is no clinical tool available to measure enamel thickness.     

1-3型二维柱形凹面线聚焦换能器声场特性

设计并研制了柱面结构的1-3型复合材料凹面线聚焦换能器,在提高换能器带宽的同时,可以实现声场的线聚焦。将换能器内部PZT柱作为独立声源,应用瑞利积分和叠加原理,推导出了柱形凹面换能器总声场的理论表达式。通过仿真计算分析了换能器在聚焦线上的声场特点以及相关参数对聚焦性能的影响。对换能器参数做出合理设计,使换能器在实现线聚焦的同时,声场在聚焦线上的起伏较小,从而设计并制作出聚焦性能良好的线聚焦凹面换能器探头。实验测试结果表明采用本文方法计算得到的换能器声场与实测的声场分布基本符合,柱形凹面换能器在其几何焦点附近范围内均可实现聚焦,并在侧向上形成清晰的聚焦线,其聚焦线长度为换能器的侧向结构长度,在聚焦线上声场分布起伏较小。     

用1-3及2-2连通复合换能器测量冻土

根据冻土弹性波测试要求，研制了一种测试冻土用的500kHz纵波，横波1-3及2-2连通复合超声换能器，其灵敏度高，频带宽，声阻抗低，波形简单及脉冲波形前沿徒削，亦适用于其它介质力学特性测试。文章介绍了换能结构原理及测量系统特性，实测了不同含水量（7%-25%）及负温（-2℃--20℃）条件下兰州黄土试块的纵，横波声速，获得很高测量精度（10ps级）。     

1-3型压电复合材料非均匀振动换能器的研究

通过调整1－3型压电复合材料换能器中压电相的分布，可以控制换能器辐射面上振动幅度和相位的分布，从而获得具有特殊性能的声场．作为辐射源表面振动速度等相位不等幅和等幅不等相位的两种典型情况，本文对边线高斯型换能器和Wesnel聚焦换能器进行了实验研究，讨论了其声场特性．     

二阶导数分光光度法测定微量锌

研究了在Tritonx-100体系中，以1-（2-吡啶偶氮）-2-萘酚（PAN）为显色剂，在PH8.7条件下，先用柠檬酸钠掩蔽大部分的铁，然后用二阶导数分光光度法消除残存的铁、铜、锰、钴的干扰，从而测定含铁络合物中微量锌。方法精密度和准确度均为满意。     

胶束增敏导数分光光度法测定微量铜

本文研究了在非离子型胶束Ｔｒｉｔｏｎ Ｘ－１００体系中，以１（２－吡啶偶氮）２－萘酚为显色剂，用二阶导数分光光度法消除镉的干扰，与乙醇介质比较，测定灵敏度提高，测定镉样中微量铜，结果较为满意。