首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到10条相似文献,搜索用时 125 毫秒
1.
This study develops a high-precision, non-destructive measurement technique based on a laser interferometer for determining the alcohol concentration of a liquid solution from its refractive index. The optical metrology system is employed to measure the refractive indexes of samples with known alcohol concentrations ranging from 5% to 95%. By applying regressional analysis to the experimental results, an analytical expression is derived to describe the quadratic relationship between the refractive index and the alcohol concentration. An excellent agreement is observed between the experimentally determined values of the alcohol concentration and the analytically predicted results. For an assumed laser interferometer resolution of 1 nm, the measurement resolution of the proposed metrology system is found to be at least F = 0.0025%, which is significantly better than that of typical stereometry methods (approximately 1.0%) Furthermore, it is shown that the measurement resolution improves as the alcohol concentration reduces.  相似文献   

2.
This study develops a non-destructive measurement system for determining the thickness and refractive indices of birefringent optical wave plates. Compared to previous methods presented in the literature, the proposed metrology system provides the ability to measure the thickness of the birefringent optical plate in high-precision. The results show that for a commercially available birefringent optical wave plate with refractive indices of ne=1.5518, n0=1.5427 and a thickness of 452.1428 μm, the experimentally determined value for the error in the wave plate thickness measurement is just 0.046 μm. The measurement resolution of the proposed system exceeds that of the interferometer hardware itself. The proposed method provides a simple yet highly accurate means of measuring the principal optical parameters of birefringent glass wave plates.  相似文献   

3.
A photonic glucose biosensor incorporating a vertically coupled polymeric microring resonator was proposed and accomplished. The concentration of a glucose solution was estimated by observing the shift in the resonant wavelength of the resonator. For achieving higher sensitivity the contrast between the effective refractive index of the polymeric waveguide and that of the analyte was minimized. Actually, the effective refractive index of the polymeric waveguide (n = ∼1.390) was substantially close to that (n = ∼1.333) of the fresh solution with no glucose. The fabricated resonator sensor with the free spectral range of 0.66 nm yielded a sensitivity of ∼280 pm/(g/dL), which corresponds to ∼200 nm/RIU (refractive index units) as a refractometric sensor, and provided a detection limit of refractive index change on the order of 10−5 RIU.  相似文献   

4.
Lo YL  Chuang CH  Lin ZW 《Optics letters》2011,36(13):2489-2491
An ultrahigh sensitivity polarimetric strain sensor is proposed based upon a four-layer D-shaped optical fiber and surface plasmon resonance (SPR) technology. In contrast to existing SPR-based sensors, which are based on changes in the refractive index of the overlayer, the sensor proposed in this study is based on the change in the refractive index of the fiber core in response to the application of an axial load. Specifically, the phase difference between the P and S waves after passing through the sensor under SPR conditions is measured using a common-path heterodyne interferometer and is used to determine the corresponding change in the refractive index of the core, from which the strain is then inversely derived. The experimental results show that the sensitivity of the proposed sensor is around 2.19×10? deg/ε, i.e., degree/strain. By contrast, that of a conventional (non-SPR) polarimetric fiber sensor is just 5.2×102 deg/ε. To the best of the authors' knowledge, the sensor proposed in this study represents the first reported attempt to exploit the refractive index change of the core of an SPR-based fiber sensor for strain measurement purposes.  相似文献   

5.
This study develops a high-precision, non-destructive optical metrology system based on a position sensing detector for measuring the refractive index of a liquid solution such that its alcohol concentration can be derived. A series of experiments are performed to measure the refractive indices of samples of known alcohol concentrations in the range 0–99.5%. The experimental results indicate that the refractive index and the alcohol concentration are related by a quadratic function. According to this mathematical function, the refractive index of a sample with an alcohol concentration of 95% is n95%=1.36442. The measured value of the refractive index of the same sample is found to be nalcohol-95%=1.36587. The deviation of just 0.00145 between the two sets of results confirms the accuracy of the analytical prediction method. For a sample with a known alcohol concentration of 37%, the error between the analytically predicted concentration value and the actual value is found to be less than 0.7%. Overall, the results confirm that the proposed system provides a low-cost, straightforward and highly precise approach for measuring the alcohol concentration of liquid samples.  相似文献   

6.
A novel surface plasmon-polaritons (SPPs) refractive index sensor based on tooth-shaped metal–insulator–metal structure is proposed and numerically simulated by using the finite difference time domain method with perfectly matched layer absorbing boundary condition. Both analytic and simulated results show that the transmission minima wavelengths in the transmitted spectrum of the sensor have a linear relationship with the refractive index of material under sensing. Based on the relationship, the refractive index of the material can be obtained from the detection of one of the transmission minima wavelengths in the transmitted spectrum. The resolution of refractive index of the nanometeric sensor can reach as high as 10? 6, given the wavelength resolution of 0.01 nm. It could be applied to high-resolution biological sensing.  相似文献   

7.
A modified Mach–Zehnder interferometer set-up combined with microscope objectives has been developed for the measurement of phase changes in the processed material sample, like modification and melting of glass. The white light is generated by focusing ultrafast laser radiation (t p=80 fs) in a sapphire crystal using a micro-lens array to minimize temporal and spatial fluctuations in the white-light continuum. Lateral and coaxial pump-probe measurements of the phase changes during material processing are performed using two coupled ultrafast laser sources at different repetition rates (f rep=1 Hz–1 MHz). The optical phase shift and therefore the refractive index of the material are calculated from the interference images using two approaches. The knowledge of the refractive index during the laser processing with a temporal resolution in the ps-range and a spatial resolution of several microns leads to a better understanding of the initial processes for the permanent material modifications.  相似文献   

8.
We propose a special refractive index sensor design based on a photonic crystal fiber. Two analyte channels are introduced, with one analyte channel coated with gold layer and the other one without gold layer. A hybrid resonance method is used in the sensor to achieve a large dynamic index range, where surface plasmon resonance occurs when the analyte index is lower than that of the fiber material, while the core mode couples with the resonant mode of the adjacent analyte-filled cylinder when the analyte index is larger than the fiber material. When considering fluorinated polymer fibers, a broad index range of analyte refractive index from 1.25 to 1.45 with high sensitivity can be achieved. The maximal sensitivities reach 1.4 × 104 nm/RIU and 2.7 × 104 nm/RIU respectively when refractive index is in the range of 1.25 to 1.383 and 1.383 to 1.45. The sensor characteristics, make this simple sensor very interesting for detecting a wide range of fluid's refractive index or chemical agent concentration.  相似文献   

9.
We describe a Mach–Zehnder interferometer (MZI) method for measuring the refractive index (RI) of polymethyl-methacrylate (PMMA) solution in both acetone and methyl-ethyl-ketone (MEK). The measurements are made as a function of concentration values 4, 8, 12, 16 and 20 g/l at a wavelength of 488 nm with a high degree of accuracy tends to 1.4×10−5. The refractive index increments (RIIs) dn/dc of PMMA in both investigated solvents are determined too. In addition, the RIIs Δn as a function of concentration and the RIIs at zero concentration (dn/dc)c=0 are determined for both solvents accurately. The PMMA solutions in acetone and MEK solvents are chosen for laser light scattering investigations.  相似文献   

10.
In recent years multi-spectral imagery is steadily growing popularity. Multi-channel imaging which includes short-wave infrared (SWIR), mid-wave infrared (MWIR) and long-wave infrared (LWIR) systems are useful for threat detection, tracking, thermal signature detection and terrain analysis. In this paper, a broad band antireflection coating on ZnS substrate, simultaneously effective in SWIR, MWIR and LWIR is reported. The coating design approach was evolved using gradient index concept, where refractive index varies gradually from incident media to the ZnS (n = 2.2) substrate. The gradient index profile depicted by 4th degree polynomial n(t) = −0.45t4 + 1.9t3 − 2.7t2 + 1.9t + 1,where n(t) is the refractive index at the distance t from ambient, and t is the thickness in micron. The profile is best approximated by eight discrete step index layers, whose first layer is thorium fluoride (n = 1.42; lowest index stable material available). Other seven layers are replaced by two equivalent layer system of real materials thorium fluoride and zinc sulphide. Final 15 layers design is deposited by e-beam evaporation. The maximum layer thickness was restricted around 0.7 μm to overcome the stress problem in the film. This 15 layers coating has shown average transmission 95% in 0.9–10.5 μm spectral band having peak 99% at 9 μm.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号