共查询到19条相似文献,搜索用时 156 毫秒
1.
2.
3.
4.
5.
6.
液-液分散体系是一类重要的软物质,双液相电流变液属于液-液分散体系.在外加电场作用下,双液相电流变液内部结构可以发生改变,因而导致它的各种物理性能变化.本项工作研究了在电场与光场共同作用下的双液相电流变液的光学性能,了解其可调节透射率特征. 相似文献
7.
为揭示高强度水下爆炸冲击载荷作用下金属夹芯结构的抗冲击性能,在实验室开展小尺寸水下爆炸加载技术对金属蜂窝夹芯结构性能影响的实验研究。基于实验结果,开展了全尺寸数值模拟金属蜂窝夹芯结构在水下冲击载荷作用下的动态响应和抗冲击性能研究。结果表明,数值模拟、实验和理论模型计算的结果具有良好的一致性。由于蜂窝芯材相对密度对夹芯结构能量耗散方式和载荷传递机制的影响,结构动态响应、失效模式以及抗冲击性能随着冲击强度的变化表现出较为明显的不同。通过抗冲击参数分析,建立了反映金属蜂窝夹芯结构抗冲击性能的结构横向变形、固支反力、透射脉冲和塑性能耗随冲击强度和芯材相对密度变化的结构-载荷-性能量化关系。 相似文献
8.
通过把负磁导率材料SRR阵列置于高性能电流变液中,研究了电极加载方式、电流变液浓度、电流变液类型以及电场强度等因素对浸入电流变液中的SRR阵列谐振频率的影响. 实验表明,电极加载方式对SRR阵列的磁响应有重要的影响;在容器盒中充满电流变液之后SRR阵列的谐振频率往低频发生了移动,并且可以通过改变外加电场强度来调节,最大的调节范围为130MHz. 数值计算结果表明SRR阵列的有效磁导率在谐振频率附近为负值,并且有效磁导率为负的频率范围也可以通过改变外加电场强度来调节.
关键词:
负磁导率材料
谐振频率
电流变液 相似文献
9.
10.
11.
用光学方法研究玻璃微珠电流变液颗粒间的相互作用 总被引:1,自引:0,他引:1
运用一套适合研究颗粒间相互作用的双光镊系统,通过对粒聚集时间的测量,得出颗粒聚集时间和电场的平方成反比。这是第一次用电流变液颗粒在动态情况下直接验证电偶极子对间的相互作用。发展了一套使用高速CCD摄像机进行扩散波谱(DWS)测量的方法,首次实时测量具有颗粒结构的非各态历经体系的自相关函数,以研究电流变液机理,得到了玻璃微珠电流变液的结构响应时间和力和响应时间;测量了不同电场下体系相关函数的特征衰减时间随时间的变化。在不同电场下测量扩散系数可以反映出相互作用力与电场的平方成正比。 相似文献
12.
Jia-Yi Yeh 《Journal of sound and vibration》2005,285(3):637-652
The dynamic stability problems of a sandwich plate with a constraining layer and an electrorheological (ER) fluid core subjected to an axial dynamic force are investigated. The rectangular plate is covered in an ER fluid core and a constraining layer to improve the stability of the system. Effects of the natural frequencies, static buckling loads, and loss factors on the dynamic stability behavior of the sandwich plate are studied in the paper. Rheological property of an ER material, such as viscosity, plasticity, and elasticity may be changed when applying an electric field. The modal damper and the natural frequencies for the sandwich plate are calculated for various electric fields. When an electric field is applied, the damping of the system is more effective. In this study, finite element method and the harmonic balance method are used to calculate the instability regions of the sandwich plate. The ER fluid core is found to have a significant effect on the dynamic stability regions. 相似文献
13.
We have investigated the pressure effect on the eletrorotation (ER) spectrum of living cell suspensions byconsidering the particle shape effect. In particular, we consider coated oblate spheroidal particles and present a theoreticalstudy of ER based on the spectral representation theory. Analytic expressions for the characteristic frequency as wellas the dispersion strength can be obtained, thus simplifying the fitting of experimental data on oblate spheroidal cellsthat abound in the literature. From the theoretical analysis, we find that the cellshape, coating as well as materialparameters can change the ER spectrum. We demonstrate a good agreement between our theoretical predictions andexperimental data on human erthrocytes suspensions. 相似文献
14.
It is well known that constant or time-varying electric fields can induce phase changes in electrorheological(ER) fluids, from a liquid to semi-solid state, provided the field strength is larger than some critical value. We describe here an experimental and theoretical study considering yet a different class of phase changes, specifically those for an ER fluid in the presence of both shear flow and a time-varying electric field. We note that as the frequency of the field is decreased, the ER fluid will go from a liquid to an intermediate transition state, and eventually to a shear banding state. Our theoretical analysis further indicates that this phase change originates from competing effects of viscous and electrical forces. Ultimately, we conclude that it is possible to achieve various states and corresponding(desired)macroscopic properties of dynamic colloidal suspensions by adjusting the frequency of the externally applied electric field. 相似文献
15.
The vibration transmissibility characteristics of a single-degree-of-freedom (SDOF) passive vibration isolation system with different nonlinear dampers are investigated in this paper. In one configuration, the damper is assumed to be linear and viscous, and is connected to the mass so that it is perpendicular to the spring (horizontal damper). The vibration is in the direction of the spring. The second configuration is one in which the damper is in parallel with the spring but the damping force is proportional to the cube of the relative velocity across the damper (cubic damping). Both configurations are studied for small amplitudes of excitation, when some analysis can be conducted based on analytical expressions, and for large amplitudes of excitation, where the analysis is based on numerical simulations. It is found that the two nonlinear systems can outperform the linear system when force transmissibility is considered. However, for displacement transmissibility, the system with the horizontal damper exhibits some desirable properties, but the system with cubic damping does not. 相似文献
16.
Impact dampers have gained much research interest over the past decades that resulted in several analytical and experimental studies being conducted in that area. The main emphasis of such research was on developing and enhancing these popular passive control devices with an objective of decreasing the three parameters of contact forces, accelerations, and noise levels. To that end, the authors of this paper have developed a novel impact damper, called the Linear Particle Chain (LPC) impact damper, which mainly consists of a linear chain of spherical balls of varying sizes. The LPC impact damper was designed utilizing the kinetic energy of the primary system through placing, in the chain arrangement, a small-sized ball between each two large-sized balls. The concept of the LPC impact damper revolves around causing the small-sized ball to collide multiple times with the larger ones upon exciting the primary system. This action is believed to lead to the dissipation of part of the kinetic energy at each collision with the large balls. 相似文献
17.
18.
An inverse model of MR damper using optimal neural network and system identification 总被引:1,自引:0,他引:1
Pin-Qi Xia 《Journal of sound and vibration》2003,266(5):1009-1023
Magnetorheological (MR) damper is one of the more promising new devices for vibration control of structures. External energy required by the adjustable fluid damper is minuscule while speed of its response is in the order of milliseconds. The MR damper is a semi-active control device and has been characterized by a set of non-linear differential equations which represent a forward model of the MR damper, i.e., the model can generate a force to a given displacement and applied voltage.This paper presents an inverse model of the MR damper, i.e., the model can predict the required voltage so that the MR damper can produce the desired force for the requirement of vibration control of structures. The inverse model has been constructed by using a multi-layer perceptron optimal neural network and system identification, which are Gauss-Newton-based Levenberg-Marquardt training algorithm, optimal brain surgeon strategy and autoregressive with exogenous variables (ARX) model. Based on the data from numerical simulation of the MR damper, the trained optimal neural networks can accurately predict voltage. If the inverse model is used in a control system, the semi-active vibration control can be implemented easily by using the semi-active MR damper. 相似文献
19.
以流动模式(flow mode)多极板之电流变阀(electrorheological valve)进行避震器阻尼力特性的研究。由于电极板的大小直接影响到流体流动的剪力及避雷器的阻尼力,因此使用多极板型式来探讨避震器的特性。设计有1-5个流道之并联及1-3个流道之串联多极板电流变阀的电流变避震器,并使用自制的电流变液进行实验。由研究结果显示,流动式并联极板之电流变避震器,一个流道之阻尼力最大,流道极板增加则阻尼力反而下降,而流动式串联多极板之电流变避震器之阻尼力则随极板数递增,故需要高阻尼力之避震器较适合使用串联多极板型式。 相似文献