Compact overtone band carbon monoxide laser

An electric-discharge carbon monoxide broadband overtone laser has been developed. The laser is capable of lasing on CO first overtone bands only (Δv = 2) and delivering up to 12 W cw power at efficiencies of up to 5%. The laser output consists of vibrational-rotational lines of the v = 9 → 7 to v = 35 → 33 overtone bands and covers the spectral range between 2.6 and 3.9 μm. Totally about 40-45 lines could be observed in the laser spectrum simultaneously. A kinetic modeling code has been developed to predict the power, efficiency, and the output spectrum of the CO overtone laser.     

Carbon monoxide laser emitting nanosecond pulses with 10 MHz repetition rate

Actively mode-locked electron-beam-sustained-discharge CO laser producing a train of ∼5-15 ns (FWHM) spikes following with repetition rate 10 MHz for both single-line and multiline mode of operation in the mid-IR range of ∼5 μm was experimentally studied. Total laser pulse duration was ∼0.5 ms for both mode-locked and free-running laser. Specific output energy in multiline CO laser mode of operation was up to 20 Jl⁻¹ Amagat⁻¹ and the laser efficiency up to 3.5%. The active mode-locking was achieved for single-line CO laser mode of operation in spectral range 5.2-5.3 μm. This sort of radiation can be used for pumping an optical parametric amplifier for optical stochastic cooling in relativistic heavy ion collider, for laser ablation, and for studying vibrational and rotational relaxation of CO and NO molecules.     

Frequency tunable single-line pulsed first-overtone carbon monoxide laser

Tunable single-line first-overtone (FO) CO lasing on wavelengths from 2.7 up to 4.2 μm corresponding to overtone vibrational transitions from 13→11 up to 38→36 on 413 ro-vibrational lines was experimentally obtained. A parametric study of energetic and spectral characteristics of the single-line FO CO laser was carried out. Energy distribution over ro-vibrational lines was measured. The maximum specific output energy (SOE) came up to 3 J/l Amagat, with single-line output efficiency being up to 0.6%. For the first time, a multi-quantum theoretical model was used to describe the tunable single-line FO CO laser. This multi-quantum approach demonstrated better agreement between theoretical calculations and observed experimental data for laser output as a function of vibrational quantum numbers.     

Silicon donor and Stokes terahertz lasers

Two types of lasers based on hydrogen-like impurity-related transitions in bulk silicon operate at frequencies between 1 and 7 THz (wavelength range of 50-230 μm). These lasers operate under mid-infrared optical pumping of n-doped silicon crystals at low temperatures (<30 K). Dipole-allowed optical transitions between particular excited states of group-V substitutional donors are utilized in the first type of terahertz silicon lasers. These lasers have a gain ∼1-3 cm⁻¹ above the laser thresholds (>1 kW cm⁻²) and provide 10 ps-1 μs pulses with a few mW output power on discrete lines. Raman-type Stokes stimulated emission in the range 4.6-5.8 THz has been observed from silicon crystals doped by antimony and phosphorus donors when optically excited by radiation from a tunable infrared free electron laser. The scattering occurs on the 1s(E)→1s(A₁) donor electronic transition accompanied by an emission of the intervalley transverse acoustic g-phonon. The Stokes lasing has a peak power of a few tenths of a mW and a pulse width of a few ns. The Raman optical gain is about 7.4 cm GW⁻¹ and the optical threshold intensity is ∼100 kW cm⁻².     

Stable multiwavelength fiber ring laser with equalized power spectrum based on a semiconductor optical amplifier

We experimentally demonstrated a new structure of a multiwavelength semiconductor optical amplifier (SOA) ring laser based on a fiber Sagnac loop filter that can generate up to 25 stable output lasing wavelengths at room temperature. By varying the length of a polarization-maintaining (PM) fiber within the Sagnac loop filter, the wavelength spacing between the output lasing wavelengths can be changed to a desired value. By tuning a polarization controller (PC) within the Sagnac loop filter, stable multiwavelength 1550-nm operation with up to 17 lasing lines within 3 dB power level variation and with a wavelength spacing of ∼0.8 nm was achieved. The optical signal-to-noise ratios (OSNRs) of all the lasing wavelengths are greater than 40 dB.     

室温条件下脉冲CO激光辐射特性

CO气体分子发射激光需要在低温(液氮温度附近)时才容易实现。为在常温条件下实现CO的激光输出,采用横向激励大气压(TEA)脉冲放电的方式对CO气体分子在室温条件下的红外发光辐射性能进行了实验研究。在实验所限定的参数条件下,没有获得FO波段激光辐射,仅实现了FB波段的激光输出。典型的指标为:电光转换效率1%,中心波长5.3μm,辐射能量0.22 J,辐射脉宽(FWHM)700 ns,相当于辐射的峰值功率达到0.3 mW左右;当以500 Hz放电脉冲重复频率运转时,常温条件下还获得了大于百瓦量级的高平均功率辐射输出。     

Directivity influence of signals propagation through EDFA gain medium of Brillouin-erbium fiber laser

We experimentally demonstrate a multiwavelength Brillouin-erbium fiber laser in two configurations; uni-directional and bi-directional propagation of Brillouin pump and Brillouin Stokes signals through an Erbium-doped fiber gain. The influence of these configurations on the performance of the output parameters in terms of lasing threshold, output channel generation and tuning range of the generated output channels are investigated. We discovered that there is a trade-off between these two fiber laser configurations. The uni-directional amplifier configuration provides greater tuning range of 46.8 nm against 23 nm at maximum Brillouin pump power of 2 mW and 1480-nm pump power of 130 mW. On the other hand, the bi-directional amplifier configuration provides 13 output channels against 6 output channels obtained from the uni-directional amplifier configuration at the same pumping powers. Nevertheless, the bi-directional amplifier configuration requires much lower pump power to initiate lasing.     

The study of a Tm:YLF laser pumped by a Raman shifted Erbium fiber laser at 1678 nm

A Tm:YLF laser pumped by a Raman shifted Er-fiber laser at 1.678 μm was studied at two Tm³⁺ ion concentrations equal to 1.5% and 5%. At output powers up to 460 mW the measured lasing efficiency at a wavelength of ~ 1.93 μm was as high as ~ 50%. The lasing performance was compared with that obtained under pumping by a 792-nm laser diode. The temporal structure of the laser pulse was recorded and the beam propagation factor M² was measured for all pumping conditions.     

Characterization of 60 GHz Multi Quantum well passively mode-locked laser under optical self-injection locking

The quality and pulse compression of the 60 GHz millimeter wave signals generated by 750 μm long InAlGaAs Multi Quantum Well (MQW) passively mode locked laser under free running and optical self-injection locked conditions are experimentally characterized in terms of longitudinal modes under certain bias currents that range from 24 mA to 90 mA. Initially, the MQW laser is characterized in free running condition with no external injection. The measurements reflect that the free spectral range of laser under test is around 61 GHz and exhibit more than 22 lasing modes. The laser is then integrated into low phase noise self-injection locking oscillator by feeding a part of output RF signal back into the laser cavity to enhance passive mode locking. By doing so the microwave line width of our laser is reduced from 900 kHz to 24 kHz with significant increase in output of resultant beat tones which exhibits strong passive mode locking. This is the first time that the free running microwave line width of MQW laser is reduced up to this level. It is evident from our experimental investigation that as we increase the power and phase correlation between different longitudinal modes inside laser cavity through optical self-injection, the strength of the passively mode locked mechanism is significantly increased and the phase noise of radio frequency signal is drastically reduced.     

Wideband CO laser in problems of laser sensing of minor gaseous components in the atmosphere

In the present work it is demonstrated that a wideband CO laser operating at fundamental and overtone vibrational transitions is a promising source of laser radiation for remote laser sensing of the atmosphere. A compact slab RF-discharge CO laser has been designed. The optimal operating conditions are determined for this CO laser. In experiments, the maximum average output laser power was ∼12 W for lasing efficiency of ∼14%. Under fixed experimental conditions, stable lasing (with fluctuations of the output laser characteristics ≤5%) was observed during more than one hour, which suggests that we first excited the sealed-off mode of cryogenic slab RF-discharge CO laser. The frequency-selective mode was first obtained for this laser. Wavelengths for sensing of nitrous oxide, nitrogen dioxide, methane, formaldehyde, and some other gases on near-ground propagation paths are determined. Our experiments and calculations confirm that this CO laser is promising for laser gas analysis. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 11, pp. 76–83, November, 2008.     

Pulsed first-overtone CO laser: effective source of IR radiation in spectral range of 2.5–4.0 μm

Spectral properties of radiation of a pulsed electron-beam controlled discharge laser operating on the first-overtone transitions (Δv=2) of CO molecules have been studied both experimentally and theoretically. Various sets of dielectric mirrors with high reflectivity in the wide range of overtone spectrum have been used for the laser resonator. Multiwavelength lasing has been obtained in the wide spectral range of 2.5–4.0 μm. Efficiency of the laser operating on few vibrational transitions within a relatively narrow spectral range comes up to 5% at entirely suppressed fundamental band (Δv=1) lasing. Spectral characteristics of the overtone laser operating on a selected set of vibrational transitions have been analyzed theoretically. A comparison of the experimental and theoretical data has been made.     

Random distributed feedback fiber laser pumped by an ytterbium doped fiber laser

A random distributed feedback fiber laser operating at 1115 nm has been demonstrated experimentally in standard communication optical fibers by using a LD-pumped Yb-doped fiber laser as the pump source. We have studied the effect of different fiber spans on this new type of random fiber laser output power. It is shown that the generation power is the highest up to 198 mW in a 50 km fiber span. The slope efficiency is more than 28.7%. Stable, high-power continuous-wave (CW) lasing can be generated when the pump power is 3.6 W. The threshold power has also been calculated which well proves a random fiber laser operating via Rayleigh scattering, amplified through the Raman scattering.     

Tunable terahertz generation from one CO2 laser in a GaSe crystal

Coherent terahertz pulses have been generated at a range of 236.3-1104.5 μm (0.27-1.3 THz) by one CO₂ laser with dual-wavelength output based on collinearly phase-matched different frequency generation (DFG) in a GaSe crystal. This source has the advantages of compact and simplicity for tuning. The output power of the THz pulse and phase-matching conditions were investigated. The maximum single pulse energy of 11 nJ was generated at a frequency of 1.23 THz (243.6 μm), corresponding to a peak output power 182 mW.     

Saturated X-ray lasing in Ni-like Sn at 11.9 nm using the GRIP scheme

We report on gain-saturated operation of the 11.9 nm X-ray lasing line in Ni-like Sn using the grazing-incidence pumping scheme (GRIP). The experiments were done with 2-ps duration pump pulses and energies up to 5 J. Strong gain saturation with multi-microjoule output was measured for the Sn laser at a grazing angle of 30° and a pump pulse energy of 3 J. This was achieved with a 4.5%, 2-ps duration prepulse 2.4 ns ahead of the main pulse and also incident at grazing incidence. Increasing laser output was observed at GRIP angles up to 45°. At this angle, the minimum energy required for saturated lasing was determined as ∼2 J.     

Laser capabilities of CuBr mixture excited by RF discharge

Our investigations demonstrated that utilizing copper bromide (CuBr) mixture as a source of Cu atoms in a RF-excited discharge can be a promising alternative to the Cu sputtered system, when the development of Cu ion gas laser is considered. Both spectroscopic and laser investigations showed that the threshold input power for lasing was reduced about 5 times using the CuBr-based system instead of the Cu-sputtered system. Pulsed and CW laser oscillation on Cu⁺ transitions in the near IR spectral region was obtained in RF-excited He-CuBr discharge operated at 13.56 MHz and 27.12 MHz. At input RF power of 800 W, a laser output power of 10 mW at the 780.8 nm Cu ion laser line was achieved. An increase of laser output power by a factor of two, as well as better Cu vapour axial distribution and better discharge stability, was attained when DC discharge was superimposed on the RF discharge. Laser gain on 11 UV Cu ion lines was observed in RF-excited Ne-CuBr discharge. basing on the obtained results, we consider the CuBr laser system excited by RF discharge capable of generating UV laser radiation at relatively low input power. Received 4 January 1999     

Semiconductor optical amplifier based swept wavelength source at 1060 nm using a scanning Fabry-Perot filter and an YDFA-based booster amplifier

We demonstrate a tuneable laser operating in the 1-1.1 μm wavelength region with a tuning range of 43 nm (FWHM), an output power of 19 mW and coherence length of 14 mm. The source is based on a master laser consisting of a cavity tuned ring configuration with a fibre Fabry-Perot filter used as a tuning element and a semiconductor amplifier as gain medium. The output of the master laser is subsequently power boosted using an Ytterbium doped fibre amplifier (YDFA). In addition to providing a power boost, we demonstrate that by tailoring the gain spectrum of the YDFA it is possible to increase the FWHM scanning range by 7 nm compared to that of the master laser.     

Medium power single-mode single-wavelength fiber laser

Medium-power, single-mode, single-wavelength fiber laser working at room temperature using a polarization-maintaining erbium-ytterbium co-doped fiber as the gain medium, and an un-pumped elliptical core erbium-doped fiber as a saturable absorber to reduce linewidth and mode hopping of the lasing wavelength is reported. The effects of length, erbium ion concentration, and polarization-maintaining property of the saturable absorber were explored. The output power of the laser was more than 100 mW and the lasing line was stable for more than 3 h with an intensity fluctuation of less than 0.2 dB. The laser linewidth (FWHM = Full width at half maximum) was 7.5 MHz and the signal to noise ratio was more than 50 dB. The output of the laser was measured using an optical spectrum analyzer (OSA) of resolution 1.25 GHz and a scanning Fabry-Perot spectrum analyzer (SFPSA) of resolution 6.7 MHz.     

Multiwavelength erbium-doped fiber laser employing a nonlinear optical loop mirror

A stable and broad bandwidth multiwavelength erbium-doped fiber laser is proposed and demonstrated successfully. A nonlinear optical loop mirror which induces wavelength-dependent cavity loss and behaves as an amplitude equalizer is employed to ensure stable room-temperature multiwavelength operation. Up to 50 wavelengths lasing oscillations with wavelength spacing of 0.8 nm within a 3-dB spectral range of 1562-1605 nm has been achieved. The measured power fluctuation of each wavelength is about 0.1 dB within a 2-h period.     

Stable, red laser pumped, multi-kilohertz Alexandrite laser

Operation of a miniature Alexandrite laser pulse-pumped at 671 nm by a Q-switched, frequency-doubled, diode-pumped Nd:GdVO₄ laser is reported. Average power output ∼150 mW at 765 nm with optical-to-optical slope efficiencies of 28% has been demonstrated for gain-switched operation of the Alexandrite laser at 80 kHz. Q-switched pump-pulse stacking has been used to reduce output pulse width by a factor of 6 and increase peak power by a factor of 38 over gain-switched operation.     

Generation of 25 ps pulses by self induced mode locking of a single broad area diode laser with 300 mW average output power

Detailed investigations of the spatiotemporal and spectral emission properties of a high power diode laser are presented. The AR coated laser diode with design wavelength of 940 nm is driven in an external resonator. The laser generates up to 340 mW average output power in a train of picosecond pulses with durations of 25 ps and repetition rates of 2.6 GHz. The mechanism of mode locking is discussed as self pulsation because of the strong correlation between round trip time and repetition rate. The double-sided exponential pulses suggest saturable absorber action.