共查询到20条相似文献,搜索用时 125 毫秒
1.
2.
本文对高温超导双饼线圈的绕制、测试和结果进行了讨论和分析,在此基础之上对传导冷却高温超导磁体进行了电磁分析,通过对6到21个双饼线圈组成的磁体的各种参数进行计算,得到了一系列变化曲线,从中可以看到各个参数的变化趋势,以便有效设计高温超导磁体。 相似文献
3.
4.
5.
6.
7.
本论文对高温超导磁体在传输直流电流时产生的损耗进行了理论分析和实验验证.本文考虑了高温超导带材非线性模型磁场方向对带材临界电流和n值的影响,用Bi2223超导带材绕制了(一个由20个双饼组成的高温超导磁体,用数值仿真和实验方法研究了此磁体传输直流电流时的指数损耗.并对每个双饼以及每匝线圈的损耗进行了分析.在液氮温度下对一个双饼线圈进行了指数损耗的测量,测量结果与数值仿真结果相当吻合.利用高温超导体临界电流此非线性模型,本文对此磁体快速励磁情况下的交流损耗的特点进行了数值模拟. 相似文献
8.
9.
本论文对高温超导磁体在传输直流电流时产生的损耗进行了理论分析和实验验证.本文考虑了高温超导带材非线性模型磁场方向对带材临界电流和n值的影响,用Bi2223超导带材绕制了(一个由20个双饼组成的高温超导磁体,用数值仿真和实验方法研究了此磁体传输直流电流时的指数损耗.并对每个双饼以及每匝线圈的损耗进行了分析.在液氮温度下对一个双饼线圈进行了指数损耗的测量,测量结果与数值仿真结果相当吻合.利用高温超导体临界电流此非线性模型,本文对此磁体快速励磁情况下的交流损耗的特点进行了数值模拟. 相似文献
10.
11.
12.
Toshihiro Tamai Hiroyuki A. Sakaue Yoshiro Terazaki Nagato Yanagi Nobuyuki Nakamura 《X射线光谱测定》2020,49(2):308-312
We present a design and test results of a high-temperature superconducting magnet, which is under development for use in a new cryogen-free electron beam ion trap. The magnet is designed to provide a magnetic field as high as about 3 T with a combination of six double-pancake coils. In order to achieve such a high field, the critical current is increased by cooling the magnet down to 20 K with a refrigerator. Before the full development, a single-pancake coil has been produced and tested. 相似文献
13.
Bi2 2 2 3银包套超导带材是研制高温超导磁体和高温超导强电应用的基础。文中就对高温超导磁体最大运行电流有重要影响的 Bi2 2 2 3银包套带材侧向弯曲形变进行了初步探讨 ,就不同的侧向弯曲率对超导带载流能力的影响进行了实验测试 ,并提出了提高 HTS磁体最大运行电流的方法。 相似文献
14.
15.
M. S. Novikov D. P. Ivanov S. I. Novikov S. A. Shuvaev 《Physics of Atomic Nuclei》2015,78(10):1148-1154
Application of current-carrying elements (CCEs) made of second-generation high-temperature superconductor (2G HTS) in magnet systems of a fusion neutron source (FNS) and other fusion devices will allow their magnetic field and thermodynamic stability to be increased substantially in comparison with those of low-temperature superconductor (LTS) magnets. For a toroidal magnet of the FNS, a design of a helical (partially transposed) CCE made of 2G HTS is under development with forced-flow cooling by helium gas, a current of 20–30 kA, an operating temperature of 10–20 K, and a magnetic field on the winding of 12–15 T (prospectively ~20 T). Short-sized samples of the helical flexible heavy-current CCE are being fabricated and investigated; a pilot-line unit for production of long-sized CCE pieces is under construction. The applied fabrication technique allows the CCE to be produced which combines a high operating current, thermal and mechanical stability, manufacturability, and low losses in the alternating modes. The possibility of fabricating the CCE with the outer dimensions and values of the operating parameter required for the FNS (and with a significant margin) using already available serial 2G HTS tapes is substantiated. The maximum field of toroidal magnets with CCEs made of 2G HTS will be limited only by mechanical properties of the magnet’s casing and structure, while the thermal stability will be approximately two orders of magnitude higher than that of toroidal magnets with LTS-based CCEs. The helical CCE made of 2G HTS is very promising for fusion and hybrid electric power plants, and its design and technologies of production, as well as the prototype coils made of it for the FNS and other tokamaks, are worth developing now. 相似文献
16.
17.
18.
19.
20.
EAST 装置电流馈线系统由13 对NbTi 材料CICC 超导母线组成,连接超导磁体系统和高温超导电流引线,为磁体系统的运行提供馈电通道和失超状态下能量的释放通道。馈线系统中超导母线由液氦制冷机通过低温分配阀箱提供的4.5K 超临界氦冷却,冷却通道进口压力为0.45MPa,出口压力不小于0.25MPa。通过对超导母线和接头内流道中的迫流氦的压降计算确定了冷却流程方案为1 对TF 超导母线单独串联组成1 个冷却通道, 12 对PF 超导母线分为6 个冷却通道,每个通道由2 对PF 超导母线串联组成。 相似文献