All-optical pseudorandom binary sequence (PRBS) generator using the hardlimiters

An all-optical pseudo random binary sequence (PRBS) generator is designed using the hard-limiters and serially interconnected D flip-flops based on two coupled polarization switches (PSWs). The performance of the circuit is evaluated through numerical simulation to confirm its feasibility in terms of the choice of the critical parameters. The proposed scheme has been theoretically demonstrated for a 3-bit degree PRBS.     

Distributed fiber temperature sensor using a laser diode modulated by a pseudo-random bit sequence

We propose and demonstrate a scheme to measure the distribution of temperature along an optical fiber based on pseudo-random sequence modulation. In our experimental work, current modulation with a pseudo-random bit sequence(PRBS) is applied to a laser diode that serves as the Brillouin pump light and reference light. Because of the independence of the spatial resolution on the PRBS length, the measurement range can be extended while maintaining high spatial resolution using a long PRBS length. Temperature-induced changes in a Brillouin frequency shift of 250 m fiber sections are clearly observed with 54 cm spatial resolution by this method.     

A bistable TV-optical feedback system

We report a TV-optical feedback system, which behaves like a two-dimensional memory, composed of many flip-flops. Each flip-flop of this set can be switched individually by an incoherent light signal. The number of flip-flops in the field depends on the distortion of the TV-system. Considering a distortion of 1%, about 2500 flip-flops can be generated and processed in parallel.     

10 Gbit/s all-optical non-return to zero-return-to-zero data format conversion based on a backward dark-optical-comb injected semiconductor optical amplifier

By using a semiconductor optical amplifier backward injected by a dark-optical-comb pulse train at 10 GHz, we demonstrate a 10 Gbit/s all-optical nonreturn-to-zero (NRZ) to return-to-zero (RZ) format conversion of an incoming optical pseudorandom binary sequence (PRBS) data stream. Both the polarity and the wavelength of data are conserved during format conversion. Without any pre-amplification, the extinction ratio of degraded optical NRZ PRBS data is greatly improved from 7.13 to 13.6 dB after NRZ-to-RZ conversion. An ultralow bit-error rate of 10(-12) at a data rate as high as 10 Gbits/s is obtained with a received optical power of -18.3 dBm. The converted RZ PRBS data exhibit a negative power penalty of >3.7 dB compared with the NRZ PRBS data at a bit-error rate of 10(-12).     

相位调制信号对窄线宽光纤放大器线宽特性和受激布里渊散射阈值的影响

高功率窄线宽光纤放大器的输出功率主要受限于受激布里渊散射(SBS)效应,通过相位调制进行线宽展宽可以有效抑制SBS效应.基于窄线宽光纤放大器中的SBS动力学模型,研究了正弦信号、白噪声信号和伪随机编码信号(PRBS)对窄线宽光纤放大器光谱特性与SBS阈值的影响.研究发现,采用不同信号进行相位调制时,调制频率和调制深度等参数对调制后激光光谱的谱线间隔、谱线数目与光谱平整度的影响存在较大差异,进而影响放大器的线宽特性和SBS阈值.通过对比分析,给出了调制信号的类型选择和参数优化原则,能够为窄线宽光纤放大器的相位调制系统设计提供参考.     

Ultrafast and bias-free all-optical wavelength conversion using III-V-on-silicon technology

Using a 7.5 μm diameter disk fabricated with III-V-on-silicon fabrication technology, we demonstrate bias-free all-optical wavelength conversion for non-return-to-zero on-off keyed pseudorandom bit sequence (PRBS) data at the speed of 10 Gbits/s with an extinction ratio of more than 12 dB. The working principle of such a wavelength converter is based on free-carrier-induced refractive index modulation in a pump-probe configuration. We believe it to be the first bias-free on-chip demonstration of all-optical wavelength conversion using PRBS data. All-optical gating measurements in the pump-probe configuration with the same device have revealed that it is possible to achieve wavelength conversion beyond 20 Gbits/s.     

一种新型的单电子A/D转换器

传统的A/D转换器结构复杂，利用一种改进的V-PADOX工艺可以制成性能均匀的互补的单电子 晶体管，工艺重复性好.用互补SET对结构实现了多阈值周期性传输功能，这可以用来简化A/ D转换电路.提出了一种利用该互补SET对结构实现的新型3位A/D转换器，具有结构简单、速 度快、功耗低等优点. 关键词： 库仑振荡 A/D转换器 互补单电子晶体管结构     

An ultra-wideband 2-bit coding metasurface using Pancharatnam—Berry phase for radar cross-section reduction

An ultra-wideband 2-bit coding metasurface is designed for radar cross-section (RCS) reduction. The design process is presented in detail, in which a polarization conversion metasurface (PCM) is first proposed. The proposed PCM can realize ultra-wideband circular polarization (CP) maintaining reflection. Moreover, Pancharatnam—Berry (PB) phase will be generated in the co-polarized reflection coefficient by rotating the metallic patches in its unit cells. Thus, based on the PCM, the four coding elements of a 2-bit coding metasurface are constructed using PB phase, and an ultra-wideband PB 2-bit coding metasurface is proposed according to an appropriate coding sequence. The simulated and experimental results show that the coding metasurface has obvious advantages of wideband and polarization-insensitivity. Compared to a metallic plate of the same size, it can achieve more than 10 dB RCS reduction in the frequency band from 9.8 GHz to 42.6 GHz with a relative bandwidth of 125.2% under normal incidence with arbitrary polarizations.     

Digital key for chaos communication performing time delay concealment

We introduce a scheme that integrates a digital key in a phase-chaos electro-optical delay system for optical chaos communications. A pseudorandom binary sequence (PRBS) is mixed within the chaotic dynamics in a way that a mutual concealment is performed; e.g., the time delay is hidden by the binary sequence, and the PRBS is also masked by the chaos. In addition to bridging the gap between algorithmic symmetric key cryptography and chaos-based analog encoding, the proposed approach is intended to benefit from the complex algebra mixing between a (pseudorandom) Boolean variable, and another continuous time (chaotic) variable. The scheme also provides a large flexibility allowing for easy reconfigurations to communicate securely at a high bit rate between different systems.     

Fault-Tolerant Design of a Shift Register at the Nanoscale Based on Quantum-dot Cellular Automata

Quantum-dot Cellular Automata (QCA) as a novel technology in the nanometer scale has been considered as one of the substitutes to CMOS technology. The QCA helps to create faster computers with lower power consumption. On the other hand, a shift register as one of the most important logical circuit in the digital systems consists of a line of latches. Also, the QCA-based designs have more advantages compared to the conventional CMOS designs. However, some deposition defects are possible to occur in the QCA-based designs, which have necessitated the fault-tolerant structures. Therefore, this paper aims to design an optimized 2-bit universal shift register based on QCA technology through the optimized multiplexer and D flip-flop. This paper studies the functionality and the fault tolerance of the proposed universal shift register in the presence of the QCA deposition faults. The structure of the 2-bit universal register is extendable to 4-bit, 8-bit and higher. The proposed design has better performance regarding fault tolerant, complexity and area consumption compared to the current designs based on the achieved results via QCADesigner.     

光子型远程分布式微波信号接收码元速率估计

基于光子学技术,设计了一种针对远程分布式微波信号接收的码元速率估计方案。首先,远程终端将接收的微波信号经电光调制器对连续激光源进行载波抑制双边带调制,生成携带微波信号的两个光边带信号;此光信号经光纤链路传输至中心站在光域滤除其中一个边带;其次,进行光电探测,通过分析电频谱的谐波实现微波信号码元速率估计。针对此方案,搭建仿真及实验系统装置:仿真成功地从60 GHz微波信号中提取出0.8 GBaud和6 GBaud的二进制伪随机码(PRBS)信号码元速率、从25 GHz微波信号中提取出3GBaud的PRBS码元速率;实验成功地从25 GHz的微波信号中提取出3 GBaud和5 GBaud的PRBS码元速率。     

Non-feedback precoder for optical DQPSK modulation

A novel non-feedback precoder circuit for high-speed parallel optical differential quadrature phase shift keying （DQPSK） modulation is proposed. The alternative control signal is introduced in replacement of the conventional feedback one, which eliminates the speed limitation due to the electronic propagation delay. The proposed precoder consists of four differential encoders, an exclusive OR gate, a cross switch, and delay lines. It is demonstrated by a true pseudo random bit sequence （PRBS） transmission at 20 Gb/s.     

Two bit all-optical analog-to-digital converter based on nonlinear Kerr effect in 2D photonic crystals

We have demonstrated the performance of a novel design for a single wavelength 2-bit all-optical analog-to-digital converter (ADC). This converter consists of two high efficient channel drop filters with a coupled cavity-based wavelength selective reflector in a 2D photonic crystal with total length of 15.87 μm. The A/D conversion is achieved by using nonlinear Kerr effect in the cavities. The output ports switch to state ‘1’ at different input power levels to generate unique states preferred for an ADC. This conversion is simulated by the finite difference time domain (FDTD) method for 5 different power levels. The proposed structure can function as a two-bit ADC with a 60 mW/μm input pulse and its maximum sampling rate is found to be ~ 45 GS/s.     

Effective Designs of Reversible Vedic Multiplier

Power dissipation problem is one of the most challenging problems in designing conventional electronic circuits. One of the best approaches to overcome this problem is to design reversible circuits. Nowadays, reversible logic is considered as a new field of study that has various applications such as optical information processing, design of low power CMOS circuits, quantum computing, DNA computations, bioinformatics and nanotechnology. Due to the vulnerability of the digital circuits to different environmental factors, the design of circuits with error-detection capability is considered a necessity. Parity preserving technique is known as one of the most famous methods for providing error-detection ability. Multiplication operation is considered as one of the most important operations in computing systems, which can play a significant role in increasing the efficiency of such systems. In this paper, two efficient 4-bit reversible multipliers are proposed using the Vedic technique. The Vedic technique is able to increase the speed of multiplication operation by producing partial products and their sums simultaneously in a parallel manner. The first architecture lacks the parity preserving potential, while the second architecture has the ability parity preserving. Since a 4-bit Vedic multiplier includes 2-bit Vedic multipliers and 4-bit ripple carry adders (RCA), so in the first design, TG, PG and FG gates have been used to design an efficient 2-bit reversible Vedic multiplier, as well as PG gate and HNG block have been applied as a half-adder (HA) and full-adder (FA) in the 4-bit RCAs. Also, in the second design, 2-bit parity preserving reversible Vedic multiplier has been designed using FRG, DFG, ZCG and PPTG gates as well as ZCG and ZPLG blocks have been utilized as HA and FA in the 4-bit RCAs. Proposed designs are compared in terms of evaluation criteria of circuits such as gate count (GC), number of constant inputs (CI), number of garbage outputs (GO), quantum cost (QC), and hardware complexity. The results of the comparisons indicate that the proposed designs are more efficient compared to available counterparts.

     

Accurate optical wavefront reconstruction based on reciprocity of an optical path using low resolution spatial light modulators

A method for high precision optical wavefront reconstruction using low resolution spatial light modulators (SLMs) was proposed. It utilizes an adiabatic waveguide taper consisting of a plurality of single-mode waveguides to decompose an incident light field into simple fundamental modes of the single-mode waveguides. By digital generation of the conjugate fields of those simple fundamental modes a field proportional to the original incident light field might be reconstructed accurately based on reciprocity. Devices based on the method using transparent and reflective SLMs possess no aberration like that of a conventional optic lens and are able to achieve diffraction limited resolution. Specifically on the surface of the narrow end of a taper a resolution much higher than half of the wavelength is attainable. The device may work in linear mode and possesses unlimited theoretical 3D space-bandwidth product (SBP). The SBP of a real device is limited by the accuracy of SLMs. A pair of 8-bit SLMs with 1000 × 1000 = 10⁶ pixels could provide a SBP of about 5 × 10⁴. The SBP may expand by 16 times if 10-bit SLMs with the same number of pixels are employed or 16 successive frames are used to display one scene. The device might be used as high precision optical tweezers, or employed for continuous or discrete real-time 3D display, 3D measurement, machine vision, etc.     

高速光学模数转换器的分析

详细分析了由x切LiNbO3干涉式共面波导行波调制器阵列构成的模数(A/D)转换器，包括其研究进展。采用保角变换方法分析了梯形共面波导电极参数(包括电极厚度、缓冲层厚度与中心电极和接地电极的边沿倾角β1，βg)与转换器的带宽、损耗、特征阻抗和驱动功率的关系。β1=βg=10°，电极厚度为3μm时，4位A/D转换器的工作带宽为7.3GHz，所需驱动功率为6.7W。数值仿真结果表明，采用梯形共面波导调制器阵列设计分辨率适中的高速A/D转换器是可行的。     

A novel approach to all-optical wavelength conversion by utilizing a reflective semiconductor optical amplifier in a co-propagation scheme

Nonlinear optical gain modulation in an InGaAsP/InP bulk reflective semiconductor optical amplifier (RSOA) is studied. The differences of the optical properties between RSOAs and conventional SOAs are initially investigated. All-optical wavelength conversion based on nonlinear gain modulation in RSOAs is demonstrated at a bit rate of 2.488 Gbit/s. It is shown that a bit-error-rate of <10⁻⁹ can be achieved and an extinction ratio of >9 dB can be obtained at a bit rate of 2.488 Gbit/s with a 2³¹-1 non-return-to-zero (NRZ) pseudorandom bit sequence (PRBS). In comparison with conventional SOAs, wavelength conversion by RSOAs shows much improved performances in high-speed all-optical wavelength conversions.     

Thermal noise for SBS suppression in fiber optical parametric amplifiers

We demonstrate a new and simple solution to suppress stimulated Brillouin scattering in fiber optical parametric amplifiers. Cumbersome PRBS or sinusoidal generators used to broaden the pump spectrum are replaced by a filtered microwave noise source. Stimulated Brillouin scattering threshold can be increased up to large values still keeping an excellent quality of amplification of nonreturn to zero signals. The simplicity and the performances of this setup open the way for a wide variety of applications for FOPAs.     

Pattern-effect-free all-optical wavelength conversion using a hydrogenated amorphous silicon waveguide with ultra-fast carrier decay

Ultra-fast carrier decay, recently discovered in a hydrogenated amorphous silicon waveguide, can be exploited for pattern-effect-free all-optical signal processing based on optical Kerr nonlinearity. In this study, we utilized a 10 Gbit/s RZ-OOK data stream as a pump for degenerate four-wave mixing in a low-loss hydrogenated amorphous silicon waveguide. The propagation loss of the waveguide used was 1.0±0.2 dB/cm at 1550 nm. Unlike crystalline silicon waveguides, no noticeable difference was observed in the BER characteristics between the cases of PRBS 2(7)-1 and 2(31)-1.     

Various Auto-Correlation Functions of m-Bit Random Numbers Generated from Chaotic Binary Sequences

This paper discusses the auto-correlation functions of m-bit random numbers obtained from m chaotic binary sequences generated by one-dimensional nonlinear maps. First, we provide the theoretical auto-correlation function of an m-bit sequence obtained by m binary sequences that are assumed to be uncorrelated to each other. The auto-correlation function is expressed by a simple form using the auto-correlation functions of the binary sequences. This implies that the auto-correlation properties of the m-bit sequences can be easily controlled by the auto-correlation functions of the original binary sequences. In numerical experiments using a computer, we generated m-bit random sequences using some chaotic binary sequences with prescribed auto-correlations generated by one-dimensional chaotic maps. The numerical experiments show that the numerical auto-correlation values are almost equal to the corresponding theoretical ones, and we can generate m-bit sequences with a variety of auto-correlation properties. Furthermore, we also show that the distributions of the generated m-bit sequences are uniform if all of the original binary sequences are balanced (i.e., the probability of 1 (or 0) is equal to 1/2) and independent of one another.