Lanthanum Oxide Effects on the Structure of Calcium Phosphate Glasses

Calcium phosphate glasses, in which part of calcium oxide was replaced by lanthanum oxide, were prepared by using the conventional melt quench method. The structures of xLa₂O₃ · (50-x)CaO · 50P₂O₅ (x = 0, 1, 3, 6, 12 mol%) samples were investigated by X-ray diffraction (XRD), Raman spectrum, Fourier transform infrared spectrum (FTIR), and differential scanning calorimetry (DSC). The results show that lanthanum oxide acts as network modifier in the network space of glass structure. The glass formation occurs at an O/P ratio of about 3.0–3.12. At larger values, the crystalline phases calcium pyrophosphate (Ca₂P₂O₇) and calcium lanthanum phosphate [Ca₉La(PO₄)₇] are detected in the samples. Raman and FTIR spectra indicate that the structure of lanthanum-free sample is chain P–O–P bond metaphosphate–based Q² units. Glass structure will change to Q² and Q¹ units when the lanthanum oxide content is less then 6 mol%. When lanthanum oxide content increases to 9 and 12 mol% more nonbridging oxygen in the glass, resulting in the depolymerization of the phosphate network, the network of glass transforms to Q², Q¹, and Q⁰ units mixture. Based upon DSC results, T_g slightly decreases because of the depolymerization of microstructure. Endothermal peak of DSC curves indicate that crystal phases separate out from vitreous body with the addition of lanthanum oxide content.     

Silicon surface passivation by atomic‐layer‐deposited Al2O3 facilitated in situ by the combination of H2O and O3 as reactants

We investigate the effect of O₃ and H₂O oxidant pre‐pulse prior to Al₂O₃ atomic layer deposition for Si surface passivation. Interfacial oxide SiO_x formed by the O₃ pre‐pulse is more beneficial than that by H₂O to a high level of surface passivation. The passivation of thinner H₂O–Al₂O₃ films is more improved by this O₃ pre‐pulse. O₃ pre‐pulse for 10 nm H₂O–Al₂O₃ reduces saturation current density in boron emitter to 18 fA cm^–2 by a factor of 1.7. Capacitance–voltage measurements reveal this interfacial oxide plays a role of decreasing interface trap density without detrimental effect to negative charge density of Al₂O₃. (© 2014 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Structure,thermal behavior,and chemical durability of lead–calcium–phosphate glasses

ABSTRACT

Structure and physical properties of 25CaO–xPbO–(75–x)P₂O₅ (0≤x≤35) glasses are investigated in this paper. Substitution of PbO for P₂O₅ in the binary 25CaO–75P₂O₅ glass was found to increase the density and to decrease the molar volume. Fourier transform infrared (FTIR) and Raman spectroscopies show the evolution of the phosphate skeleton when the PbO content increases: Q³ to Q² species (0<x≤25) and Q² phosphate network (x = 25) to short phosphate groups (x > 25) such as (P₄O₁₃^6?) (x = 35). The glass transition temperature first decreases with x, then increases for x values larger than 10%. The evolution of the glass transition temperatures is interpreted from the structural data: the minimum point observed in T_g is attributed to the transition of the ultraphosphate network from the network containing the modifying cations at isolated sites to a network with modifier sub-structure sharing terminal oxygens. At higher PbO content, the large increase in T_g is due to the reticulation of the phosphate network by PbO₄ groups.     

Reactivity of C4‐indolyl substituted 1,4‐dihydropyridines toward superoxide anion (O2•) in dimethylsulfoxide

Reactivity of two new C4‐indolyl substituted 1,4‐dihydropyridines (1,4‐DHPs) toward superoxide anion (O₂^? ) in dimethylsulfoxide (DMSO) is reported. Reactivity was followed by electrochemical and spectroscopic techniques. Gas chromatography‐mass spectrometry (GC–MS) was used to identify the final products of the reaction. C4 indolyl‐substituted‐1,4‐DHPs reacted toward O₂^? at significant rates, according to the calculated kinetic rate constants. Results are compared with 4‐phenyl‐DHP and the commercial 1,4‐DHPs, nimodipine, nisoldipine, and amlodipine. Indolyl‐substituted 1,4‐DHPs were more reactive than the commercial derivatives. The direct participation of proton of the 1‐position of the secondary amine in the quenching of O₂^? was demonstrated. Copyright © 2008 John Wiley & Sons, Ltd.     

The Raman spectrum of the γ′‐V2O5 polymorph: a combined experimental and DFT study

Structure and vibrational dynamics of γ′‐V₂O₅ synthesized from a pristine γ‐LiV₂O₅ sample via a chemical oxidation route was studied by means of Raman spectroscopy and quantum‐chemical calculations. The calculations based on density functional theory reliably reproduce the experimental structure of the γ′‐V₂O₅ lattice. The calculated Raman spectrum agrees remarkably well with the experimental one. Making use of the agreement, a complete assignment of Raman bands to vibrations of particular structural units is proposed. The comparison of Raman spectra and structural features of α‐V₂O₅ and γ′‐V₂O₅ polymorphs allowed establishing reliable ‘structure–spectrum’ correlations and identifying Raman peaks characteristic for different structural units. Copyright © 2015 John Wiley & Sons, Ltd.     

Influence of nanocrystalline phases on the electrical properties of lithium titanate phosphate glass ceramics mixed with Ga2O3 nanocrystals

Several glass ceramic compositions dispersed with Ga₂O₃ nanocrystals, in the series samples (100???x)[0.4Li₂O–0.1TiO₂–0.5P₂O₅]?+?xGa₂O₃ with x?=?0, 2, 4, 6, 8, and 10?mol% of Ga₂O₃ were synthesized via high-energy ball milling technique and labeled as lithium gallium titanate phosphate glass (LTPG _x ) (x is the mol% of Ga₂O₃ nanocrystals). The compositions have been selected on the basis of thermal stability data obtained from differential thermal analysis. X-ray diffraction studies indicate nanocrystalline phase formation in the controlled crystallized glasses. The variation of electrical conductivity was explained in the light of growth of nanocrystalline phases. The best bulk conductivity (σ?=?7.03?×?10^?4?S?cm^?1, at 303?K) was achieved by the sample containing 8?mol% of Ga₂O₃ nanocrystals content, labeled as LTPG₈ sample. The activation energy for conduction (E_{a σ} ) is obtained from the temperature dependent of conductivity data, which is fitted to Arrhenius equation. The single super curve in the scaling spectra suggested the temperature-independent relaxation phenomenon.     

High‐gain Zn1–xMgx O‐based ultraviolet photodetectors on Al2O3 and LiGaO2 substrates

We report the fabrication and characterization of highly responsive ZnMgO‐based ultraviolet (UV) photodetectors in the metal–semiconductor–metal (MSM) configuration for solar‐blind/visible‐blind optoelectronic application. MSM devices were fabricated from wurtzite Zn_1–xMg_x O/ZnO (x ～ 0.44) thin‐film heterostructures grown on sapphire (α‐Al₂O₃) substrates and w‐Zn_1–xMg_x O (x ～ 0.08), grown on nearly lattice‐matched lithium gallate (LiGaO₂) substrates, both by radio‐frequency plasma‐assisted molecular beam epitaxy (PAMBE). Thin film properties were studied by AFM, XRD, and optical transmission spectra, while MSM device performance was analyzed by spectral photoresponse and current–voltage techniques. Under biased conditions, α‐Al₂O₃ grown devices exhibit peak responsivity of ～7.6 A/W at 280 nm while LiGaO₂ grown samples demonstrate peak performance of ～119.3 A/W, albeit in the UV‐A regime (～324 nm). High photoconductive gains (76, 525) and spectral rejection ratios (～10³, ～10⁴) were obtained for devices grown on α‐Al₂O₃ and LiGaO₂, respectively. Exemplary device performance was ascribed to high material quality and in the case of lattice‐matched LiGaO₂ films, decreased photocarrier trapping probability, presumably due to low‐density of dislocation defects. To the best of our knowledge, these results represent the highest performing ZnO‐based photodetectors on LiGaO₂ yet fabricated, and demonstrate both the feasibility and substantial enhancement of photodetector device performance via growth on lattice‐matched substrates. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Investigation of N‐carbamoylamino acid nitrosation by {NO + O2} in the solid‐gas phase. Effects of NOx speciation and kinetic evidence for a multiple‐stage process

Nitrosation of N‐carbamoylamino acids (CAA) by gaseous NO + O₂, an interesting synthetic pathway to amino acid N‐carboxyanhydrides (NCA), alternative to the phosgene route, was investigated on N‐carbamoyl‐valine either in acetonitrile suspension or solventless conditions, and compared to the classical nitrosating system NaNO₂ + CF₃COOH (TFA), the latter being quite less efficient in terms of either rate, stoichiometric demand, or further tractability of the product. The rate and efficiency of the NO + O₂ reaction mainly depends on the O₂/NO ratio. Evaluation of the contribution of various nitrosating species (N₂O₃, N₂O₄, HNO₂) through stoichiometric balance showed the reaction to be effected mostly by N₂O₃ for O₂/NO ratios below 0.3, and by N₂O₄ for O₂/NO ratios above 0.4. The relative contribution of (subsequently formed) HNO₂ always remains minor. Differential scanning calorimetry (DSC) monitoring of the reaction in the solid phase by either HNO₂ (from NaNO₂ + TFA), gaseous N₂O₄ or gaseous N₂O₃, provides the associated rate constants (ca. 0.1, 2 and 10⁸ s^?1 at 25°C, respectively), showing that N₂O₃ is by far the most reactive of these nitrosating species. From the DSC measurement, the latent heat of fusion of N₂O_3, 2.74 kJ · mol^?1 at ?105 °C is also obtained for the first time. The kinetics was investigated under solventless conditions at 0°C, by either quenching experiments or less tedious, rough calorimetric techniques. Auto‐accelerated, parabolic‐shaped kinetics was observed in the first half of the reaction course, together with substantial heat release (temperature increase of ca. 20°C within 1–2 min in a 20‐mg sample), followed by pseudo‐zero‐order kinetics after a sudden, important decrease in apparent rate. This kinetic break is possibly due to the transition between the initial solid‐gas system and a solid‐liquid‐gas system resulting from water formation. Overall rate constants increased with parameters such as the specific surface of the solid, the O₂/NO ratio, or the presence of moisture (or equivalently the hydrophilicity of the involved CAA), however without precise relationship, while the last two parameters may directly correlate to the increasing acidity of the medium. Copyright © 2007 John Wiley & Sons, Ltd.     

Plasma enhanced atomic layer deposition of gallium oxide on crystalline silicon: demonstration of surface passivation and negative interfacial charge

Herein we report on the passivation of crystalline silicon by gallium oxide (Ga₂O₃) using oxygen plasma as the oxidizing reactant in an atomic layer deposition (ALD) process. Excess carrier lifetimes of 2.1 ms have been measured on 1.75 Ω cm p‐type silicon, from which a surface recombination current density J₀ of 7 fA cm^–2 is extracted. From high frequency capacitance‐voltage (HF CV) measurements it is shown that, as in the case of Al₂O₃, the presence of a high negative charge density Q_tot/q of up to –6.2 × 10¹² cm^–2 is one factor contributing to the passivation of silicon by Ga₂O₃. Defect densities at midgap on the order of ～5 × 10¹¹ eV^–1 cm^–2 are extracted from the HF CV data on samples annealed at 300 °C for 30 minutes in a H₂/Ar ambient, representing an order of magnitude reduction in the defect density compared to pre‐anneal data. Passivation of a boron‐diffused p⁺ surface (96 Ω/□) is also demonstrated, resulting in a J₀ of 52 fA cm^–2. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Rapid,Microwave‐Assisted,and One‐Pot Synthesis of Magnetic Palladium–CoFe2O4–Graphene Composite Nanosheets and Their Applications as Recyclable Catalysts

Here, a microwave‐assisted approach has been demonstrated to rapidly prepare magnetic Pd–CoFe₂O₄–graphene (GE) composite nanosheets in ethylene glycol (EG) solvent. The generation of both Pd and CoFe₂O₄ nanoparticles is accompanied with the reduction process of graphene oxide (GO) by EG. The surface morphologies and chemical composition of the composite nanosheets are characterized by transmission electron microscopy (TEM), energy‐dispersive X‐ray spectrometer (EDS), powder X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FTIR) measurements. The as‐prepared Pd–CoFe₂O₄–GE composite nanosheets exhibit a remarkable catalytic activity towards the reduction of 4‐nitrophenol by sodium borohydride (NaBH₄) at room temperature. The apparent kinetic rate constant (K _app) of this catalytic reaction could reach about 11.0 × 10^?3 s^?1. Moreover, the CoFe₂O₄ component exhibits a magnetic property, which could make the Pd–CoFe₂O₄–GE composite nanocatalysts separated from the suspension system. The catalytic conversion of the 4‐nitrophenol to 4‐aminophenol could reach 87.2% after four cycles. This work presents a simple, rapid, and versatile method to fabricate both metal and spinel‐type complex oxides on GE nanosheets, providing a new opportunity for their applications in the recyclable catalytic reaction.     

Raman studies and optical properties of some (PbO)x(Bi2O3)0.2(B2O3)0.8−x glasses

Five (PbO)_x(Bi₂O₃)_0.2(B₂O₃)_0.8−x glasses, where x = 0, 0.2, 0.3, 0.4 and 0.6, were prepared. The dilatometric glass transition temperature (T_g) was found in the region 470 (x = 0)≥ T_g ( °C) ≥ 347 (x = 0.6), and the density (ρ) varied within 4.57 (x = 0) ≤ ρ (g/cm³) ≤ 8.31 (x = 0.6). Raman spectra indicated the conversion of BO₃ to BO₄ entities for low x values but for x > 0.3, namely, for x → 0.6, back‐conversion occurred, most probably. From the measurements of the optical transmission on very thin bulk samples, the room temperature optical gap values (E_g) were determined to be in the range 4.03 (x = 0)≥ E_g (eV) ≥ 3.08 (x = 0.6). The temperature (T) dependence of the optical gap (E_g(T)) in the region 300 ≤ T(K) ≤ 600 was examined and approximated by a linear relationship of the form of E_g(T) = E_g(0)− γT, where γ × 10⁻⁴(eV/K) varied from 5.1 to 6.8. The non‐linear refractive index (n₂) was estimated from the optical gap values and it was found to correspond to the n₂ values calculated from the experimental third‐order non‐linear optical susceptibility taken from the literature. Copyright © 2008 John Wiley & Sons, Ltd.     

Determination of N and O – Atom and N2(A) Metastable Molecule Densities in the Afterglows of N2 and N2‐O2 Microwave Discharges

Early afterglows of N₂ and N₂‐O₂ flowing microwave discharges are characterized by optical emission spectroscopy. The N and O atom and N₂(A) metastable molecule densities are determined by optical emission spectroscopy after calibration by NO titration for N‐atoms and measurements of NO and N₂ band intensities for O‐atoms and N₂(A) metastable molecules. By using N₂ tanks with 50 and 10 ppm impurity, it is determined in the afterglow an O‐ atom impurity of 150‐200 ppm. Variations of the N and O‐atom and N₂(A) metastable molecule densities are obtained in the early afterglow of N₂–(9·10^–5–3·10^–3)O₂ gas mixtures. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Ionic and electronic conduction of oxygen ion conductors in the Bi2O3−Y2O3 system

The ionic conduction of sintered samples of Bi₂O₃?Y₂O₃ containing 20–30 mol% Y₂O₃ has been investigated by means of ac conductivity experiments and EMF measurement of an oxygen concentration cell using the specimen tablet as electrolyte. Ac conductivity was measured at a frequency of 10 kHz under oxygen partial pressures ranging from 1 to 10^-21 atm. The results show that these materials possess high ionic conduction. The conductivities for samples containing 22.5–30 mol% Y₂O₃ are many times higher than those of stabilized zirconia-based solid electrolyte at corresponding temperatures. The ratio of E_meas./E_calc. of an oxygen concentration cell Pt∣O₂(air)∣Bi₂O₃?Y₂O₃∣O₂(pure oxygen)∣Pt is close to 1 which shows that the materials containing 22.5 to 30 mol% Y₂O₃ are nearly pure ionic conductors. The p-type conductivity is negligible at higher P_O2 values. The n-type conduction for a sample containing 27.5 mol% Y₂O₃ was investigated using the Coulomb titration technique in which the following cell was used: Pt Rh∣O₂(air)∣Bi₂O₃?Y₂O₃∣[O]_sn∣W.log P_é=-767000/T+665. P_é is equal to 2.6×10^-61 atm at 800°C. The n-type conductivity is also very small. Thus these materials are good oxygen ionic conductors.     

Loose‐powder technique for X‐ray fluorescence analysis of ancient pottery using a small (100 mg) powdered sample

A molded‐loose‐powder technique using a small powdered sample (100 mg) was developed for the X‐ray fluorescence analysis of 22 components (Na₂O, MgO, Al₂O₃, SiO₂, P₂O₅, K₂O, CaO, TiO₂, MnO, Fe₂O₃, V, Cr, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, and Pb) in ancient pottery. This loose powder specimen was prepared by pressing the small powdered sample into a sample holder, formed from a stainless steel disk (48‐mm diameter × 0.8‐mm height) with a hole (11‐mm diameter), by hand. Calibration standards were prepared by homogenizing chemical reagents containing these 22 analytes using the concentration ranges of 166 ancient potteries and three clay materials from Japan. The calibration curves of these benchmark mixtures exhibited a good linearity (correlation coefficient, r = 0.990–1.000), accuracy, and reproducibility compared with those of other synthesized specimens and three reference standards. The lower limits of detection were less than tens of mg kg^?1 (e.g., 94 mg kg^?1 for Na₂O, 11 mg kg^?1 for P₂O₅, 1.1 mg kg^?1 for Rb, and 0.9 mg kg^?1 for Y). Using the present method, we determined 22 components in two prehistoric potteries from Japan. The advantage of this method is that only a small amount of sample is required, which can be prepared easily and rapidly and reused for other analyses. Copyright © 2012 John Wiley & Sons, Ltd.     

Oxygen vacancy induced ferromagnetism in rutile TiO2–x

First‐principles LDA + U calculations have been performed to study the effects of oxygen vacancies (V_O) on the electronic structure and magnetism in undoped rutile TiO_2–x . Instead of treated as an adjustive parameter, the value of U was determined by constrained‐density‐functional calculations. The calculated electronic structure reveals that the valence electrons released by V_O would occupy mainly the neighboring Ti:3d orbital which then becomes spin‐polarized due to intra‐atomic exchange interaction, thereby giving rise to the half‐metallic ferromagnetism. The magnetization induced by V_O in rutile TiO_2–x is almost proportional to the V_O concentration (x) for x > 0.0625, and becomes 0 for x ≤ 0.0417. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

2p3/2−13x−1–3x−13d3/2−1 x‐ray satellites in the Lα2 region

The energies and intensities of the various transitions corresponding to the transition scheme 2p_3/2^?13x^?1–3x^?13d_3/2^?1 (i.e. L₃M_x–M_xM₄) were used to compute theoretical Lα₂ satellite spectra in 13 elements in the atomic number range of 62 ≤ Z ≤ 90. The energies were calculated using available HFS data on K–LM and L–MM transition energies. The intensities of all the possible transitions were estimated by considering cross‐sections for the Auger transitions simultaneous to a hole creation and then distributing statistically the total cross‐sections for initial two‐hole states 2p_3/2^?13x^?1 (L₃M_x) amongst various allowed transitions from these initial states to 3x^?13d_3/2^?1 (M_xM₄) final states. Each transition was assumed to give rise to a Gaussian line and the overall spectrum was computed as the sum of these Gaussian curves. The calculated spectra were compared with the available measured Lα satellite spectra. The peaks in the theoretical satellite spectra were identified as the experimentally reported satellites Lα_s, La₁₃, La₁₄ and La₁₇, which lie on the high‐energy side of the Lα₂ dipole line. Copyright © 2005 John Wiley & Sons, Ltd.     

Dielectric and piezoelectric properties of manganese‐modified PbHfO3–PbTiO3–Pb(Mg1/3Nb2/3)O3 ternary ceramics with morphotropic phase boundary compositions

High piezoelectric and electromechanical properties were reported in the PbHfO₃–PbTiO₃–Pb(Mg_1/3Nb_2/3)O₃ ternary system with morphotropic phase boundary (MPB) compositions. This work focuses on the effect of MnO₂ addition on 0.8Pb(Hf_0.443Ti_0.557)O₃–0.2PMN (0.8PHT–0.2PMN) ceramics. It was observed that the Mn acceptor modification induced a “hardening” effect in 0.8PHT–0.2PMN, with decreased piezoelectric coefficients d₃₃ and dielectric loss tan δ and a significantly increased mechanical quality factor Q_m. Moreover, the 0.2 wt% MnO₂‐doped 0.8PHT–0.2PMN ceramics exhibited good piezoelectric and electromechanical properties with d₃₃, planar electromechanical coupling k_p and Q_m being on the order of 360 pC/N, 61% and 700, respectively, showing advantages compared to those of commercial hard PZT4 ceramics, which is attractive for high power applications. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Enols of 2‐nitro‐ and related 2‐substituted malonamides

The structures of 2‐substituted malonamides, YCH(CONR¹R²)CONR³R⁴ (Y = Br, SO₂Me, CONH₂, COMe, and NO₂) were investigated. When Y = Br, R¹R² = R³R⁴ = HEt; Y = SO₂Me, R¹–R⁴ = H and for Y = CONH₂ or CONHPh, R¹–R⁴ = Me, the structure in solution is that of the amide tautomer. X‐ray crystallography shows solid‐state amide structures for Y = SO₂Me or CONH₂, R¹–R⁴ = H. Nitromalonamide displays an enol structure in the solid state with a strong hydrogen bond (O^…O distance = 2.3730 Å at 100 K) and d(OH) ≠ d(O^…H). An apparently symmetric enol was observed in solution, even in appreciable percentages in highly polar solvents such as DMSO‐d₆, but K_enol values decrease on increasing the solvent polarity. The N,N′‐dimethyl derivative is less enolic. Acetylmalonamides display a mixture of enol on the acetyl group and amide in non‐polar solvents, and only the amide in DMSO‐d₆. DFT calculations gave the following order of pK_enol values for Y: H > CONH₂ > COMe ≥ COMe (on acetyl) ≥ MeSO₂ > CN > NO₂ in the gas phase, CHCl₃, and DMSO. The enol on the C?O group is preferred to the aci‐nitro compound, and the N? O? H^…O?C is less favored than the C?O? H^…O?C hydrogen bond. Copyright © 2009 John Wiley & Sons, Ltd.     

Surface modifications of crystalline SiO2 and Al2O3 induced by energetic heavy ions

Abstract

Glasses with composition × CoO.(0.25-x) CaO.0.75 B₂O₃ have been prepared over the range 0 ≤ x ≤ 0.25 containing 2 mol% of V₂O₅. Electron paramagnetic Resonance spectra of VO²⁺ of these glasses has been measured at X-band (ν ≈ 9.15 GHz) at room temperature and at liquid nitrogen temperature. Spin Hamiltonian parameters of the VO²⁺ ions have been calculated. It is found that for x ≤ 0.12 the octahedral symmetry of the V⁴⁺ site is improved. A part of these glasses were annealed at 473 K for 24 hours and EPR spectra were recorded and analysed.     

Study of spin–phonon coupling in LiFe1 − xMnxPO4olivines

LiFe_{1 − x}Mn_xPO₄ olivines are promising material for improved performance of Li‐ion batteries. Spin–phonon coupling of LiFe_{1 − x}Mn_xPO₄ (x = 0, 0.3, 0.5) olivines is studied through temperature‐dependent Raman spectroscopy. Among the observed phonon modes, the external mode at ~263 cm⁻¹ is directly correlated with the motions of magnetic Fe²⁺/Mn²⁺ ions. This mode displays anomalous temperature‐dependent behavior near the Néel temperature, indicating a coupling of this mode with spin ordering. As Mn doping increases, the anomalous behavior becomes clearly weaker, indicating the spin–phonon coupling quickly decreases. Our analyses show that the quick decrease of spin–phonon coupling is due to decrease of the strength of spin–phonon coupling, but not change of spin‐ordering feature with Mn doping. Importantly, we suggest that the low electrochemical activity of LiMnPO₄ is correlated with the weak spin–phonon coupling strength, but not with the weak ferromagnetic ground state. Our work would play an important role as a guide in improving the performances of future Li‐ion batteries. Copyright © 2015 John Wiley & Sons, Ltd.