苯胺和丙烯酸协同聚合一步法制备聚苯胺纳米管（英文）

本文通过加入过硫酸铵(APS)引发苯胺和丙烯酸(AA)在水溶液中的协同聚合反应,一步合成出具有中空结构的聚苯胺纳米管.聚苯胺纳米管的外径平均为180 nm,内径约80 nm,其形成取决于苯胺与丙烯酸的摩尔比(X_(ani/AA)).当X_(ani/AA)不超过1时,主要得到聚苯胺纳米管.在三电极体系中测定了所制备的聚苯胺纳米管的电化学性能.在1mol/LH_2SO_4为电解液,电流密度为0.5A/g的条件下,聚苯胺纳米管比电容高达436 F/g,是通常聚苯胺纳米片的七倍,此外,在0.5 A/g的电流密度下进行500次充放电循环后,其比电容能够保持最初始的89.2%,表现出优异的充放电循环稳定性.     

反夹心化合物[E-C{5-n}H{5-n}Nn-E]+和[E-C{5-n}H{5-n}Pn-E]+(n=1，2，3; E=Al，Ga，In，Tl)的理论研究

研究了含有低价族元素的反夹心化合物[E-C_{5-n}H_{5-n}N_n-E]⁺和[E-C_{5-n}H_{5-n}P_n-E]⁺(n=1,2,3; E=Al,Ga,In,Tl)．(η5, η5) 配位的反夹心构型[E-C_{5-n}H_{5-n}N_n-E]⁺ 在能量上不稳定或不存在．而(η5,η5)配位的反夹心构型[E-C_{5-n}H_{5-n}P_n-E]⁺不但在能量上稳定, 在解离过程中也具有稳定性． 对于含有相同的E元素来说,[E-C_{5-n}H_{5-n}P_n-E]⁺的解离稳定性随着n的增加而降低;而对于确定的n来说, 含有不同E的化合物的解离能是类似的．其中[E-C₄H₄P-E]⁺的解离稳定性与已知的[E-C₅H₅-E]⁺非常相似．C_{5-n}H_{5-n}P_n与E之间的相互作用主要是离子性的． 由于在(η5,η5)配位的[E-C_{5-n}H_{5-n}N_n-E]⁺中,E和P原子上都具有孤对电子,因此该反夹心化合物可以作为多电子供体．     

The laser-induced fluorescence spectrum of CoS between 15 200 and 19 000 cm-1

测量了在15200～19000 cm^-1的超声射流冷却的CoS自由基的激光诱导荧光激发谱. 观测到[15.58]⁴Δ_7/2～X⁴Δ_7/2, [16.02]⁴Δ_7/2～X⁴Δ_7/2, [16.50]⁴Δ_7/2～X⁴Δ_7/2, [17.80]⁴П_5/2～X⁴Δ_7/2和[18.00]⁴Δ_7/2～X⁴Δ_7/2五个电子跃迁序列. 此外,还测量到了大多数观察的振动带的寿命. 并讨论了这些新的电子态的电子构型.     

二硫化碳分子在204 nm附近的光解离动力学研究：S(3PJ)+CS(X1Σ+)产物通道

本文用时间切片离子速度影像技术研究CS₂分子在204 nm附近的光解离动力学. 在201.36、203.10、204.85和206.61 nm这四个解离波长下,实验清楚地观测到S(³P_J)+CS(X¹Σ⁺)产物通道. 在实验获得的S(³P_J=2,1,0)影像中,对应的CS(X¹Σ⁺)产物的振动态结构得到了部分的分辨. 通过对影像的分析,还获得了解离的总平动能谱以及产物的各项异性参数. 实验观察到的相对小的各项异性参数表明产物更倾向于经历了间接的光解离过程. 这一通道的自旋－轨道禁阻特征也说明了非绝热效应在二硫化碳紫外光解离生成S(³P_J=2,1,0)+CS(X¹Σ⁺)的过程中发挥了重要作用.     

OCS经由F 31Π里德堡态生成CO(X1Σ+)+S(1D2)产物的波长相关性光解离

本文利用时间切片离子速度成像技术在134∽140 nm波段研究了OCS分子经由F 3¹Π里德堡态的真空紫外光解离动力学. 在选取的5个分别对应OCS(F 3¹Π, v₁=0∽4)的伸缩振动激发的光解波长，实验测得了来自CO(X¹Σ⁺)+S(¹D₂)产物通道的SS(¹D₂))实验影像，并获得了总平动能谱和CO(X¹Σ⁺, v)共生产物的振动布居及角分布. 结果分析表明OCS分子解离生成CO(X¹Σ⁺)+S(¹D₂)产物的过程经历了上态F 3¹Π 与C_?v和C_s构型的下电子态间非绝热耦合过程. 实验结果显示了很强的波长相关性：OCS (F 3¹Π, v₁)的较低转动激发态(v₁=0∽2)和较高转动激发态(v₁=3, 4)的CO(X¹Σ⁺)产物的振动布居和角分布具有显著差异，表明该解离过程中具有不同的解离机理. 本结果提供了振动耦合可能对真空紫外光解离动力学产生关键作用的相关证据.     

OCS分子在128 nm附近的光解动力学研究：S(3PJ=2,1,0)、S(1D2)以及S(1S0)产物通道

本文利用时间切片离子成像技术对OCS分子进行了真空紫外波段的光解动力学研究. 在四个光解光波长(从129.32到126.08 nm)下测量了硫原子解离产物S(³P_J=2,1,0)、S(¹D₂)、S(¹S₀)的速度影像，并从中清晰地发现了四个主要的解离产物通道：S(³P_J=2,1,0)+CO(X¹Σ⁺)，S(³P_J=2,1,0)+CO(A³π)，S(¹D₂)+CO(X¹Σ⁺)和S(¹S₀)+CO(X¹Σ⁺). 在实验影像中，产物CO分子的部分振动态结构能够得到分辨. 实验还获取解离产物总平动能谱，产物分支比和角分布. 对实验结果进行分析显示除绝热解离通道S(³P_J=2,1,0)+CO(A³π)之外，在其他三个产物通道中非绝热效应都起到非常重要的作用.     

OCS分子在里德堡F态的真空紫外光解动力学：S(3PJ=2,1,0)产物通道

本文利用可调谐真空紫外光源和时间切片离子速度成像技术研究了OCS分子的真空紫外光解动力学. 在对应OCS里德堡F态的五个光解波长下(133.26 nm∽139.96 nm)实验采集了S(³P_J=2,1,0)产物的离子影像,从中发现了两个解离通道：S(³P_J=2,1,0)+CO(X¹Σ⁺)和S(³P_J=2,1,0)+CO(A³π),其中前者为主要通道. 离子影像中CO产物的振动结构可部分分辨. 从离子影像中提取出了S(³P_J=2,1,0)+CO(X¹Σ⁺)通道的产物总平动能分布、各向异性参数和CO振动态分支比等信息. 发现了对应OCS在F态的几个低振动态下光解的产物各向异性参数取负值,而对应F态的几个高振动态下光解产物的各向异性参数为正值. 另外,同一光解波长下三种S产物S(³P₂)、S(³P₁)和S(³P₀)的各向异性参数也不相同. 经分析,这些现象可能来源于激发区域的其它不同对称性的电子态的贡献,从而导致解离过程中同时存在平行解离和垂直解离. 本工作有利于进一步理解OCS真空紫外光解中的非绝热耦合作用.     

甲基铝氧烷纳米管分子结构的理论研究

用密度泛函理论对[(AlOMe)₂]_n、[(AlOMe)₃]_n和[(AlOMe)₄]_n (n=1～10)作为重复单元组成的甲基铝氧烷(MAO)纳米管进行了研究,计算了其所有体系的结合能和总能量．结果表明,[(AlOMe)₃]_n和[(AlOMe)₄]_n具有稳定的纳米管结构,在所有研究系统中n=3时具有最稳定的结构．考察发现,[(Al₅O₅)]_n和[(Al₇O₇)]_n两种结构的二聚体具有无规则、扭曲的结构,不能继续增长形成纳米管结构．     

MgF自由基A2π-X2Σ+跃迁的高分辨激光诱导荧光光谱和Franck-Condon因子

MgF自由基被认为是适用于直接激光冷却的候选分子之一. 本文利用激光诱导荧光技术研究了MgF A²π-X²Σ⁺电子跃迁系统的转动分辨光谱. 在超声射流膨胀条件下利用两个镁针对SF₆/Ar气体混合放电产生MgF自由基. 在348∽370 nm范围内,实验记录了属于Δv=0,±1三个序的19个振动带. 通过对实验光谱的转动分析,确定了X²Σ⁺和A²π态的精确光谱常数. 利用实验结果结合和Rydberg-klein-rees方法计算了包括Franck-Condon因子(FCFs)在内的光谱常数. 实验结果和理论计算的FCFs之间存在显著差异,表明FCFs几乎不依赖于A²π态自旋-轨道耦合效应. 本文确定的势能曲线和FCFs为MgF分子激光冷却方案的理论模拟提供了必要的光谱数据.     

无表面活性剂Pt和PtRu纳米粒子制备及其甲醇氧化活性

利用一种简单的方法制备不含任何表面活性剂并具有高甲醇氧化活性的Pt和PtRu纳米电催化剂. 以CO为还原剂, CO和多壁碳纳米管(MWCNT_s)为保护剂和载体,通过一步反应得到沉积在多壁碳纳米管上Pt纳米粒子,在制备过程中无需使用任何有机溶剂或表面活性剂. 利用循环伏安法和计时电流法表征了所合成催化剂的甲醇氧化活性,甲醇氧化的峰电位(ca. 0.9 V vs. RHE)处的电流密度和比质量电流高达11.6 mA/cm² 和860 mA/mg_Pt. 在Pt/MWCNT_s表面电沉积Ru后,催化剂在低电位处的甲醇氧化活性得到提高,其在0.5和0.6 V的稳态比质量电流分别达到了20和80 mA/mg.     

Free-standing WS<Subscript>2</Subscript><Emphasis Type="Strikethrough">-</Emphasis>MWCNTs hybrid paper integrated with polyaniline for high-performance flexible supercapacitor

As two-dimensional layered nanomaterials, the tungsten disulfide (WS₂) nanosheets can be used as building blocks of paper-like electrodes for high-performance FSs. However, poor conductivity and mechanical property of WS₂ nanosheets (NSs) paper greatly hinders their capacitance and/or rate performance. To solve these problems, we fabricated the WS₂-multiwalled carbon nanotubes (MWCNTs)/polyaniline (PANI) composite papers based on liquid exfoliation and electrochemical deposition for high-performance flexible supercapacitors. The WS₂-MWCNTs/PANI with conductive PANI chains linked WS₂ NSs and MWCNTs takes the advantages of high-electronic double-layer capacitance originated from the internal surface areas of MWCNTs and effective pseudocapacitance generated by exfoliated WS₂ NSs and PANI. Electrochemical studies showed that the gravimetric-specific capacitance of WS₂-MWCNTs/PANI can reach ~760.1 F/g at a current density of 1 A/g. A symmetric flexible solid-state supercapacitor was also assembled and studied. The WS₂-MWCNTs/PANI-assembled FS device also has an excellent area specific capacitance of 1158.7 mF/cm² at a current density of 0.5 mA/cm² together with a high-capacity retention of ~82.5% after 2000 cycles.     

Electrochemical supercapacitors of electrodeposited PANI/H-RuO2 hybrid nanostructure

Electrodeposited mixed nanostructures composed of conducting polyaniline (PANI) and hydrous ruthenium oxide (H-RuO₂) referred as a hybrid nanostructure was synthesized. The surface morphology was investigated from the field-emission scanning electron microscopy digital photoimages. Fibrous network of PANI and spheres of H-RuO₂ were obtained. PANI embedded H-RuO₂ was confirmed from the Raman spectroscopy analysis. Cyclic-voltammetry, used to characterize the electrochemical capacitive properties of hybrid PANI/H-RuO₂ (RP 30) nanostructure, showed a specific capacitance as high as 322 F/g in 0.5 M H₂SO₄ electrolyte. The electrochemical impedance spectroscopy measurement revealed the low equivalent series resistance.     

Electrochemical synthesis and performance of PANI electrode material for electrochemical capacitor

Polyaniline (PANI) electrode materials doped with sulfuric acid (H₂SO₄) were prepared by cyclic voltammetry (CV) method in different reaction conditions. The structure and morphology of PANI samples were characterized by Fourier transform infrared spectroscopy and scanning electron microscope. The electrochemical properties of PANI samples were studied by CV, galvanostatic charge/discharge, and electrochemical impedance spectroscopy tests. Additionally, the effects of reaction conditions including aniline concentration, voltammetry scan rate, and deposition time on the morphology and properties of PANI samples were investigated in detail. The results showed that the PANI synthesized under the optimal conditions of 0.2 mol?L^?1 aniline, scan rate 20 mV?s^?1, and deposition time 50 min is in the form of nanorods with a cross-linked network structure. It exhibits an outstanding capacitive performance with good cycle stability and high rate performance. Besides, the specific capacitance of PANI is as high as 757 F?g^?1.     

Pickering emulsion polymerization of polyaniline/LiCoO2 nanoparticles used as cathode materials for lithium batteries

The oil in water (o/w) emulsions were prepared using aniline dissolved in toluene and LiCoO₂ particles as stabilizers (Pickering emulsions). Pickering emulsions are stabilized by adsorbed solid particles instead of emulsifier molecules. The mean droplet diameter of emulsions was controlled by the mass ratio M (oil)/M (solid particles). The emulsions showed great stability during 3 days. The composite materials containing LiCoO₂ and the conductive polymer polyaniline (PANI) have been prepared by means of polymerization of aniline emulsion stabilized by LiCoO₂ particles. The composite materials were characterized by nanosphere and nanofiber-like structures. The nanofiber-like morphology of the powdered material was distinctly different of the morphologies of the parent materials. The electrochemical reactivity of PANI/LiCoO₂ composites as positive electrode in a lithium battery was examined during lithium ion deinsertion and insertion by galvanostatic charge–discharge testing; PANI/LiCoO₂ (1:4) composite materials exhibited the best electrochemical performance by increasing the reaction reversibility and capacity compared to that of the pristine LiCoO₂ cathode. The first discharge capacity of PANI/LiCoO₂ (1:4) was 167 mAh/g, while that of LiCoO₂ was136 mAh/g.     

Chitosan-ZnO/polyaniline ternary nanocomposite for high-performance supercapacitor

We report on the synthesis of chitosan-zinc oxide (ZnO)/polyaniline (CS-ZnO/PANI) ternary nanocomposites via in situ polymerization of aniline in the presence of CS-ZnO nanocomposite prepared by simple precipitation method. The structure, morphology, and physicochemical properties of prepared ternary composites are characterized by Fourier transform infrared, UV–visible, X-ray diffraction, SEM, EDXS, TEM, thermogravimetric/differential thermal analysis, and N₂ adsorption/desorption measurements. Their electrochemical properties are also investigated using cyclic voltammetry, galvanostatic charge–discharge tests, and electrochemical impedance spectroscopy. Electrochemical measurements show that the mesoporous CS_0.12-ZnO_2.5/PANI electrode yields larger specific capacitance (587.15 F g^?1) than the corresponding PANI-ZnO electrode without added chitosan and the capacitance retention is 80 % after 1,000 charge/discharge cycles at 175 mA cm^?2 current density in the voltage range of 0 to 0.8 V vs. SCE, due to the synergistic effect among three components which result in enhanced specific capacitance and cycling stability. The resulting composites are promising electrode materials for high-performance, environmentally friendly, and low-cost electrical energy storage devices.     

Honeycomb-like manganese oxide nanospheres for redox supercapacitors

Honeycomb-like MnO₂ nanospheres were synthesized using stainless steel substrates by a facile chemical bath deposition method. The obtained nanospheres were about 200–400 nm in diameter and consisted of porous ultrathin nanosheets. Honeycomb-like MnO₂ nanospheres exhibited a high specific capacitance of 240 F g^?1 and 87.1% capacitance retention after 1000 cycles at a current density of 0.5 A g^?1. These remarkable electrochemical results imply great potential for applications of the honeycomb-like MnO₂ nanospheres in supercapacitors.     

Synthesis and electrochemical properties of Ni doped titanate nanotubes for lithium ion storage

Ni doped titanate nanotubes were synthesized by hydrothermal method using Ni doped rutile TiO₂ nanopowders as a starting material. The electrochemical properties were investigated by cyclic voltammmetric methods. The microstructure and morphology of the synthesized powders were characterized by XRD (X-ray diffraction), and HRTEM (high resolution transmission electron microscopy). Ni doped nanotubes were composed of H₂Ti₂O₅·H₂O with outer and inner diameter of ∼10 nm and 6 nm and showed a initial discharge capacity of 305 mAh/g with poor cycling performance. However, after firing, the Ni doped nanotubes revealed better cycling performance due to lower reaction with hydrate and smaller diameter of the tubes.     

In situ synthesis and characterization of LiNi0.5La0.08Fe1.92O4-polyaniline core-shell nanocomposites

Core-shell-structured LiNi_0.5La_0.08Fe_1.92O₄-polyaniline (PANI) nanocomposites with magnetic behavior were synthesized by in situ polymerization of aniline in the presence of LiNi_0.5La_0.08Fe_1.92O₄ nanoparticles. The structure, morphology and magnetic properties of samples were characterized by powder X-ray diffraction (XRD), Fourier transform infrared (FTIR), UV-vis absorption, transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM) technique. The results of spectroanalysis indicated that there was interaction between PANI chains and ferrite particles. TEM study showed that LiNi_0.5La_0.08Fe_1.92O₄-PANI nanocomposites presented a core-shell structure with a magnetic core of 30-50 nm diameter and an amorphous shell of 10-20 nm thickness. The nanocomposites under applied magnetic field exhibited the hysteresis loops of the ferromagnetic nature. The saturation magnetization and coercivity of nanocomposites decreased with decreasing content of LiNi_0.5La_0.08Fe_1.92O₄. The polymerization mechanism and bonding interaction in the nanocomposites have been discussed.     

Preparation and characterization of conducting polymer/silver hexacyanoferrate nanocomposite

In this work, we present an alternative route to prepare silver hexacyanoferrate(II)/polyaniline (PANI) composite thin films. Differently from the electrochemical method, used to synthesize the conducting polymer film on a electrode surface, this new chemical route makes use of dialysis membrane as a solid support to synthesize the silver hexacyanoferrate(III) compound, and subsequently uses this composite membrane as oxidizing agent to polymerize the aniline monomer. The spectroscopic (UV-vis and IR region) and electrochemical characterization (cyclic voltammetry) indicates that the polymeric composite remains optically active and conductive. The X-ray analysis shows that the composite membrane/Ag₃[Fe_III(CN)₆] has an crystalline structure that can be assigned to the Ag₃[Fe_III(CN)₆] structure, and after reaction with aniline solution it became less crystalline. Additionally the SEM measurements shown that the reaction of silver ions with hexacyanoferrate(III) across the membrane results in a well defined and aliened Ag₃[Fe_III(CN)₆] crystals and when this crystalline compound reacts with aniline monomer silver wire of 100 nm of diameter by 6 μm longer are formed together with the conducting polymer polyaniline/Ag_x[Fe_II(CN)₆] composite.     

Improvement of the adhesion between polyaniline and commercial carbon paper by acid treatment and its application in supercapacitor electrodes

Commercial carbon paper was coated with polyaniline (PANI) using in situ polymerization of aniline. Prior to the PANI coating, acid treatment was performed to carboxylate the surface of the carbon paper for enhancing PANI adhesion by sonication of the carbon paper in a mixture of concentrated sulfuric and nitric acids. The loading mass density of PANI on the acid-treated carbon paper increased more than three times compared to that on the carbon paper without acid treatment. The specific capacitance also increased from 112 to 174 F/g in a two-electrode system (calculated using a total mass of carbon paper and PANI) due to better PANI coating on the acid-treated carbon paper. The simple acid treatment provides good adhesion of PANI to the commercial carbon paper and can be applied to prepare supercapacitor electrodes.