光阴极注入器型能量回收射频加速器

 光阴极注入器型能量回收射频加速器（PERL）是新一代加速器，在高平均功率自由电子激光和下一代高亮度光源等研究中有很好的应用前景。分析了PERL的强流与高平均功率特性，对注入器输出束流品质的要求及光阴极注入器、超导加速腔等关键技术进行了研究，设计分析了一种特殊结构的高压DC Gun光阴极注入器，能有效地提高DC加速腔中的加速场强，当高压为1MV和加速场达到10MV/m时，产生的电子束流能够基本满足PERL应用要求。同一超导加速段中的束流加速和能量回收的数值模拟计算结果表明，能获得高效率电子束流能量回收效果。     

用于高平均功率FEL的DC-SC光阴极注入器

 为获得用于高平均功率自由电子激光（FEL）的高平均流强电子束，设计了一种新型的DC-SC光阴极注入器。该注入器由皮尔斯直流引出结构、1+1/2超导腔和同轴功率耦合系统组成，可以提供高品质、CW模式或高占空比的电子束。对DC-SC光阴极注入器进行了优化设计和束流动力学研究。模拟和优化结果表明DC-SC光阴极注入器完全可以用于高平均功率自由电子激光。模型腔实验验证了理论模拟的可靠性。     

光阴极RF腔注入器束流发射度研究

 分析了光阴极RF腔注入器中的RF场效应和空间电荷效应，给出了电子在加速腔中束流发射度的解析表达式，它说明在加速过程中束流发射度是振荡变化的。利用SUPERFISH和GPT程序模拟计算了光阴极1+1/2腔注入器输出束流发射度与加速场强、注入相位、束团大小和形状、束团电荷的关系。适当选择这些条件，可以获得横向发射度小于2πmm·mrad 的输出束流。     

北京大学DC-SC光阴极注入器的升级设计

 基于直流电子枪-超导加速腔（DC-SC）光阴极注入器样机的初步实验结果，北京大学提出了新的注入器的改进设计。新注入器核心结构包括皮尔斯枪和3+1/2超导腔。文章给出了它们的详细结构参数，然后采用程序，对注入器的束流动力学进行了模拟。结果发现：新注入器可以提供具有高束流品质、高平均流强的电子束，束团的电荷量100 pC，横向发射度低于2 mm·mrad,脉宽5 ps,rms束斑可达0.5 mm，重复频率81.25 MHz；也可以提供电荷量为300 pC低重复频率的高峰值流强的电子束，其横向发射度小于3 mm·mrad,脉宽约为9 ps，以满足北京大学自由电子激光（PKU-FEL）实验平台的要求。     

用于高平均功率自由电子激光器的DC–RF超导腔注入器

北京大学超导加速器实验室提出了新型DC?RF超导腔注入器的设计方案.该注入器由皮尔斯引出结构、1+1/2超导腔组成,可以提供高品质的、CW模式或高占空比(1%以上)的电子束.对该注入器进行了分析计算和设计研究,通过改变超导腔首腔腔形以增加聚焦效果,采取措施缩短阴极到超导腔的距离,从而有效地抑制束流发射度的增长.用PARMELA对该注入器进行束流动力学研究,以确定皮尔斯引出结构的形状以及超导腔的同步相位.计算结果表明这种用于高平均功率自由电子激光的注入器的设计方案是可行的.     

热阴极微波电子枪预测式自适应前馈控制系统

 北京自由电子激光装置采用热阴极微波电子枪作为电子直线加速器的注入器,在较长脉冲工作条件下, 热阴极微波枪固有的反轰效应使束流强度随时间增加, 能量因束负载效应而降低, 导致束流能散度变差, 并在随后的加速过程中因注入束流的纵向发射度的扩大而进一步变坏, 最终降低自由电子激光的性能。实验表明, 采用带预测的自适应前馈控制克服束负载效应以及提高微波枪束流质量切实可行。     

合肥软X射线波段自由电子激光注入器模拟优化

合肥软X射线波段自由电子激光项目是基于直线加速器的软X射线光源. 其注入器由光阴极微波电子枪与两个直线加速3米段构成. 光阴极微波电子枪产生束团电荷量1nc、峰值流强100A、重复频率10Hz电子束流, 并利用螺线管磁场在其出口处进行发射度补偿, 在经过一段漂移距离后电子束流进入增强直线段加速. 使在低能端由于空间电荷效应产生的横向发射度增长基本被完全补偿. 本文中利用PARMELA对注入器进行了模拟计算, 对发射度的补偿效果进行了优化, 同时对注入器内各元件的布置也进行了优化. 在注入器出口可以得到归一化横向发射度小于1.5mm.mrad的低发射度束流.     

曙光一号自由电子激光器(FEL)电子束发射度的分析

对曙光一号自由电子激光装置电子束发射度的测量值进行了深入的分析。严格地计算了不同发射度的束流在摇摆器内的传输,计算了发射度对激光功率的影响。由此得出,曙光一号自由电子激光器可以省去9米长的束流选择段。     

砷化镓光阴极直流高压注入器研究进展

主要介绍自由电子激光相干强太赫兹源(FEL-THz)装置上的砷化镓光阴极直流高压注入器的研究进展,并讨论其驱动未来高重复频率短波长自由电子激光器的差距。通过综合砷化镓阴极寿命的三大影响因素,提出了其工作寿命的定性物理模型;通过该模型对阴极和注入器进行优化,在直流高压电子枪上得到了5mA,32min的连续稳定输出;测量了电子束在4.8mA下归一化发射度约为4.0πmm·mrad,阴极热发射度约为0.6πmm·mrad,电子束本征横向能量约为92meV,250keV电子束在距离阴极90.6cm处纵向均方根长度约为11.5ps。这一束流状态已经基本满足FEL-THz需求。     

DC-SC光阴极注入器的束载实验的调试进展

 北京大学射频超导实验室设计了新型超导光电子枪——DC-SC光阴极注入器，目标是为自由电子激光平台提供能量在2~3MeV，脉宽小于10ps，脉冲重复频率为81.25MHz，平均流强约为1mA的低发射度电子束。现在已经建成了DC-SC光阴极注入器实验平台，包括激光驱动光阴极系统，Pierce直流高压加速结构，1.3GHz 1＋1/2纯铌超导腔，恒温器低温系统，4.5kW连续波微波系统，1/16分频与同步控制系统，束流诊断系统和能量分析系统等。并且完成了超导腔的静态实验，直流加速结构也经过了100μA低电流测试。实验结果符合设计要求，整体调试后即可以进行束载实验。     

Preliminary design and simulation of a 162.5 MHz high- intensity proton RFQ for an accelerator driven system

A new procedure for the design and simulation of a Radio Frequency Quadrupole (RFQ) accelerator has been developed at the Argonne National Laboratory. This procedure is integrated with the beam dynamics design code DESRFQ and the simulation code TRACK, which are based on three-dimensional field calculations and the particle-in-cell mode beam dynamics simulations. This procedure has been applied to the development of a 162.5 MHz CW RFQ which is capable of delivering a 10 mA proton beam for the Accelerator Driven System (ADS) of the CAS. The simulation results show that this RFQ structure is characterized by the stable values of the beam acceleration efficiency for both the zero current beam and space charge dominated beam. For an average beam current of 10 mA, there is no transverse rms emittance growth, the longitudinal rms emittance at the exit of RFQ is low enough and there is no halo formation. The beam accelerated in the RFQ could be accepted easily and smoothly by the following super-conducting linear accelerator.     

A 1-MW, 1-mm continuous-wave FELtron for toroidal plasma heating

A powerful, continuous-wave millimeter radiation source is presented. An electrostatic Cockcroft-Walton accelerator (2.5 MV) drives an FEL (free-electron laser) of 1 MW power. The accelerator has a new design in order to obtain a very powerful (50 MW) electron beam and very small ripple. A recovery system is used to increase RF power and efficiency. The FEL oscillator is 1.5-m long, with a permanent magnet helical wiggler. The cavity is equipped with Bragg mirrors. The FEL is set at the high voltage terminal     

光阴极微波电子枪中发射度补偿及模拟计算

介绍了上海深紫外自由电子激光用光阴极微波电子枪采用发射度补偿技术的结果 .详细分析了线性空间电荷力的特点及对束流发射度的影响 ,从束流动力学和相空间两方面讨论了发射度补偿原理 .给出了补偿线圈的设计结构及其轴向场分布 .利用PARMELA程序对补偿效果作了模拟计算 .结果表明 ,设计的腔体对单圈 1 .5nC束团 ,在枪出口后 1 .2m处 ,电子能量为 5 .7MeV ,横向归一化发射度εn ,RMS=1 .61 2πmm·mrad. The emittance compensation technology will be used on the photo cathode RF gun for Shanghai SDUV FEL. In this paper, the space charge force and its effect on electron beam transverse emittance in RF gunis is studied, the principle of emittance compensation in phase space is discussed. We have designed a compensation solenoid and calulated its magnetic field distribution. Its performance has been studied by the code PARMELA. A simulation result indicates that the normalized transverse RMS emi...     

电荷束团横向非均匀密度分布引起的发射度增长

直线加速器中电荷束团的非线性效应是导致束流发射度增长的一个重要原因。本文给出了直线加速器中几种常见的横向非均匀电荷密度分布的有限长空间电荷束团所具有的非线性自场能,得到了由束团非均匀电荷密度分布引起的发射度增长。     

Optimization of the lattice function in the planar undulator applied for terahertz FEL oscillators

Since the beta function of the electron beam within the undulator has a great influence on the power gain of the free electron laser (FEL), optimization of the undulator lattice becomes important. In this paper, the transfer matrix of the planar undulator is obtained from differential equations of the electron motion. Based on this, the lattice function of the planar undulator in a terahertz FEL oscillator proposed by Huazhong University of Science and Technology (HUST-FEL) is optimized and the expressions of the average beta function are derived. The accuracy of the optimization result was confirmed well by the numerical method. The application range of this analytical method is given as well. At last, the emittance growth in the horizontal direction due to the attenuation of the magnetic field is discussed.     

Ion source and stripper gas cell developments for the 6 MeV tandemheavy ion beam probe on the Large Helical Device

The feasibility of a heavy ion beam with a tandem acceleration system for plasma potential measurement has been examined. A plasma-sputter-type ion source which produces an Au^- beam with an energy width as small as 6 eV and a reasonably small emittance of π mm-mrad (MeV)^½, can be used for this purpose. Suitable target gas thickness for a charge exchange is estimated to be less than 10¹⁵ atom/cm² at the 3 MV terminal voltage     

Transverse dynamics of space charge dominated beam during bunching

In this paper we present a technique to optimize the transport parameters for transverse matching of the space charge dominated beams in the presence of bunching. The increase in the current within the specified bunch width during the transport is obtained from the disc model and is included in the optimization method. A 2D particle in cell (PIC) code is then developed to study the details transverse dynamics of the bunch taking into account the effect of longitudinal compression by reweighting the charge and mass of macroparticles. The evolution of rms beam size obtained using PIC simulation agrees well with the results obtained by solving beam envelope equation. The PIC simulation shows emittance growth during bunching induced by the space charge effect for nonuniform distribution. The growth in the emittance increases with the nonlinearity of distribution and peaks near the time focus.     

一台14GHzCAPRICE型ECR离子源的束流引出

An ion beam extracted from an ECRIS suffers from the inhomogeneous distribution of cold electrons within the minimum B configuration,necessary to confine the plasma.Especially for higher ion currents,the space charge force is not negligible any more,and because of the nonlinear force,emittance growth will occur. Measurements of the profile and the emittance of the beam directly behind the source show the complicated correlation between extraction voltage and plasma density.The emittance has been measured with a pepper pot device to account for the inhomogeneous azimuthal distribution of the beam.These results indicate that further information about the profile is required.To visualize the beam profile a tantalum foil with a thickness of 20μm has been used for an electrical beam power between 10 and 50W.Looking on the back side of the foil with a CCD camera it is possible to record the profile in real time.As a more sensitive diagnostic tool viewing targets made from BaF has been used. Three dimensional computer simulations have been used to identify the reason for the structures,observed in measurements.