Lithium titanate as anode material for lithium-ion cells: a review

Lithium titanate (Li₄Ti₅O₁₂) has emerged as a promising anode material for lithium-ion (Li-ion) batteries. The use of lithium titanate can improve the rate capability, cyclability, and safety features of Li-ion cells. This literature review deals with the features of Li₄Ti₅O₁₂, different methods for the synthesis of Li₄Ti₅O₁₂, theoretical studies on Li₄Ti₅O₁₂, recent advances in this area, and application in Li-ion batteries. A few commercial Li-ion cells which use lithium titanate anode are also highlighted.     

Electrostatic spray deposition of spinel Li4Ti5O12 thin films for rechargeable lithium batteries

Spinel Li₄Ti₅O₁₂ thin films are important for the fabrication of rechargeable lithium microbatteries. Porous thin films of Li₄Ti₅O₁₂ were prepared by electrostatic spray deposition (ESD) technique with lithium acetate and titanium butoxide as the precursors. The structures of these films were analyzed by scanning electron microscopy and X-ray diffraction. Coin-type cells with a liquid electrolyte were made with the Li₄Ti₅O₁₂ films against metallic lithium. Their electrochemical performance was investigated by means of galvanostatic cell cycling, cyclic voltammetry and Ac impedance spectroscopy. It was found that pure spinel phase of Li₄Ti₅O₁₂ was obtained. After annealing at the optimal temperature of 700 °C, the films can deliver a reversible specific capacity of about 150 mAh/g with excellent capacity retention after 70 cycles. Their electrochemical characteristics were quite comparable with those of the Li₄Ti₅O₁₂ laminate electrodes containing carbon black additive.     

Neutron diffraction and Mössbauer studies of iron substituted Li2Ti3O7 of ramsdellite-type as negative electrode for Li-ion accumulator

In this work we have reported the electrochemical lithiation properties of ramsdellite Li_2.28Ti_3.43O₈, and two new iron-doped ramsdellite phases of compositions Li_2.624Ti_3.088Fe_0.343O₈ and Li_2.28Ti_3.153Fe_0.31O_7.9. In the two iron-doped samples, charge balance is maintained by excess lithium and by oxygen vacancies respectively. The use of neutron diffraction and ⁵⁷Fe Mössbauer spectroscopy is of high interest for studying effect of lithium or vacancies located in the channels of the ramsdellite-type structure. In the case of iron-doped ramsdellite-type phases, all the iron ions are located on octahedral sites and the quadrupole spittings are related to the number of lithium in the neighbourhood of probed atoms. The presence of iron limits the reversible capacity due to the decrease of lithium mobilily through the channels of the ramsdellite-type structure.     

Preparation and characterization of spinel Li4Ti5O12 nanoparticles anode materials for lithium ion battery

Spinel Li₄Ti₅O₁₂ nanoparticles were prepared via a high-temperature solid-state reaction by adding the prepared cellulose to an aqueous dispersion of lithium salts and titanium dioxide. The precursors of Li₄Ti₅O₁₂ were characterized by thermogravimetry and differential scanning calorimetry. The obtained Li₄Ti₅O₁₂ nanoparticles were characterized using X-ray diffraction, transmission electron microscopy (TEM) and electrochemical measurements. The TEM revealed that the Li₄Ti₅O₁₂ prepared with cellulose is composed of nanoparticles with an average particle diameter of 20–30 nm. Galvanostatic battery testing showed that nano-sized Li₄Ti₅O₁₂ exhibit better electrochemical properties than submicro-sized Li₄Ti₅O₁₂ do especially at high current rates, which can deliver a reversible discharge capacity of 131 mAh g⁻¹ at the rate of 10 C, whereas that of the submicro-sized sample decreases to 25 mAh g⁻¹ at the same rate (10 C). Its reversible capacity is maintained at ~172.2 mAh g⁻¹ with the voltage range 1.0–3.0 V (vs. Li) at the current rate of 0.5 C for over 80 cycles.     

Electrospinning preparation of one-dimensional Co<Superscript>2+</Superscript>-doped Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> nanofibers for high-performance lithium ion battery

One-dimensional Co²⁺-doped Li₄Ti₅O₁₂ nanofibers with a diameter of approximately 500 nm have been synthesized via a one-step controllable electrospinning method. The Co²⁺-doped Li₄Ti₅O₁₂ nanofibers were systematically characterized by XRD, ICP, TEM, SEM, BET, EDS mapping, and XPS. Based on the cubic spinel structure and one-dimensional effect of Li₄Ti₅O₁₂, Co²⁺-doped Li₄Ti₅O₁₂ nanofibers exhibit the enlarged lattice volume, reduced particle size and enhanced electrical conductivity. More importantly, Co²⁺-doped Li₄Ti₅O₁₂ nanofibers as a lithium ion battery anode electrode performs superior electrochemical performance than undoped Li₄Ti₅O₁₂ electrode in terms of electrochemical measurements. Particularly, the reversible capacity of Co²⁺-doped Li₄Ti₅O₁₂ electrode reaches up to 140.1 mAh g^?1 and still maintains 136.5 mAh g^?1 after 200 cycles at a current rate of 5 C. Therefore, one-dimensional Co²⁺-doped Li₄Ti₅O₁₂ nanofiber electrodes, showing high reversible capacity and remarkable recycling property, could be a potential candidate as an anode material.     

Influence of post-calcination treatment on the spinel lithium titanium oxide anode material for lithium ion batteries

The influence of post-calcination treatment on spinel Li₄Ti₅O₁₂ anode material is extensively studied combining with a ball-milling-assisted rheological phase reaction method. The post-calcinated Li₄Ti₅O₁₂ shows a well distribution with expanded gaps between particles, which are beneficial for lithium ion mobility. Electrochemical results exhibit that the post-calcinated Li₄Ti₅O₁₂ delivers an improved specific capacity and rate capability. A high discharge capacity of 172.9 mAh g^?1 and a reversible charge capacity of 171.1 mAh g^?1 can be achieved at 1 C rate, which are very close to its theoretical capacity (175 mAh g^?1). Even at the rate of 20 C, the post-calcinated Li₄Ti₅O₁₂ still delivers a quite high charge capacity of 124.5 mAh g^?1 after 50 cycles, which is much improved over that (43.9 mAh g^?1) of the pure Li₄Ti₅O₁₂ without post-calcination treatment. This excellent electrochemical performance should be ascribed to the post-calcination process, which can greatly improve the lithium ion diffusion coefficient and further enhance the electrochemical kinetics significantly.     

Structure,ionic conduction,and phase transformations in lithium titanate Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript>

The spinel structure of lithium titanate Li₄Ti₅O₁₂ is refined by the Rietveld full-profile analysis with the use of x-ray and neutron powder diffraction data. The distribution and coordinates of atoms are determined. The Li₄Ti₅O₁₂ compound is studied at high temperatures by differential scanning calorimetry and Raman spectroscopy. The electrical conductivity is measured in the high-temperature range. It is shown that the Li₄Ti₅O₁₂ compound with a spinel structure undergoes two successive order-disorder phase transitions due to different distributions of lithium atoms and cation vacancies (□, V) in a defect structure of the NaCl type: (Li)_8a[Li_0.33Ti_1.67]_16dO₄ → [Li□]_16c[Li_1.33Ti_1.67]_16dO₄ → [Li_1.33□_0.67]_16c[Ti_1.67□_0.33]_16dO₄. The low-temperature diffusion of lithium predominantly occurs either through the mechanism ... → Li(8a) → V(16c) → V(8a) → ... in the spinel phase or through the mechanism ... → Li(16c) → V(8a) → V(16c) → ... in an intermediate phase. In the high-temperature phase, the lithium cations also migrate over 48f vacancies: ... Li(16c) → V(8a, 48f) → V(16c) → ....     

Evolution of crystal structure and electrochemical performance of layered Li<Subscript>1.20</Subscript>Ti<Subscript>0.44</Subscript>Cr<Subscript>0.36</Subscript>O<Subscript>2</Subscript>/C cathode materials with cycling

Carbon-coated layered Li_1.20Ti_0.44Cr_0.36O₂/C and pristine Li_1.20Ti_0.44Cr_0.36O₂ cathode materials have been synthesized through a sol–gel method followed by high-temperature calcination. Their electrochemical performances have been evaluated, which indicate that the Li_1.20Ti_0.44Cr_0.36O₂/C exhibits much higher cyclic stability and capacity than the pristine one. The initial delithiation capacity of the Li_1.20Ti_0.44Cr_0.36O₂/C can reach 217.1 mAh g^?1. The reversible capacity retention is 94 % after 100 cycles at current density of 23 mA g^?1. Ex situ X-ray diffraction and electrochemistry impedance spectroscopy coupled with impedance fitting have been employed to reveal evolution of the crystal structure and the electrochemical kinetics of the Li_1.20Ti_0.44Cr_0.36O₂/C with delithiation/lithiation cycling. The results indicate that the cation layers of the Li_1.20Ti_0.44Cr_0.36O₂/C experience order to disorder transition. The abrupt delithiation capacity fading and potential drop after the initial cycle are resulted from the order to disorder transition accompanying with steep increase of the charge transfer resistance and decrease of the exchange current density and the Li-ion diffusion coefficient simultaneously.     

Spinel lithium titanate (Li4Ti5O12) as novel anode material for room-temperature sodium-ion battery

This is the first time that a novel anode material, spinel Li₄Ti₅O₁₂ which is well known as a “zero-strain” anode material for lithium storage, has been introduced for sodium-ion battery. The Li₄Ti₅O₁₂ shows an average Na storage voltage of about 1.0 V and a reversible capacity of about 145 mAh/g, thereby making it a promising anode for sodium-ion battery. E_x-situ X-ray diffraction (XRD) is used to investigate the structure change in the Na insertion/deinsertion process. Based on this, a possible Na storage mechanism is proposed.     

Synthesis and electrochemical performance of hole-rich Li4Ti5O12 anode material for lithium-ion secondary batteries

Hole-rich Li₄Ti₅O₁₂ composites are synthesized by spray drying using carbon nanotubes as additives in precursor solution, subsequently followed calcinated at high temperature in air. The structure, morphology, and texture of the as-prepared composites are characterized with XRD, Raman, BET and SEM techniques. The electrochemical properties of the as-prepared composites are investigated systematically by charge/discharge testing, cyclic voltammograms and AC impedance spectroscopy, respectively. In comparison with the pristine Li₄Ti₅O₁₂, the hole-rich Li₄Ti₅O₁₂ induced by carbon nanotubes exhibits superior electrochemical performance, especially at high rates. The obtained excellent electrochemical performances of should be attributed to the hole-rich structure of the materials, which offers more connection-area with the electrolyte, shorter diffusion-path length as well faster migration rate for both Li ions and electrons during the charge/discharge process.