The Effect of Zinc Oxide and Calcium Carbonate Nanoparticles on the Thermal Conductivity of Polypropylene

The thermal conductivity (TC) of compression-moulded polypropylene (PP) and PP filled with 5–15% zinc oxide (ZnO) or calcium carbonate (CaCO₃) nanoparticles, prepared by extrusion, was studied using a thermal conductivity analyzer (TCA). The effect of nanoparticle content and crystallinity on the thermal conductivity was investigated using conventional methods, including SEM, XRD, and DSC. The incorporation of nanoparticles improved the crystallinity and thermal conductivity simultaneously. The experimental TC values of the PP nanocomposites with different level of nanoparticles concentration showed a linear increase with an increase in crystallinity. The TC improvement in PP/ZnO nanocomposite was greater than that of PP/calcium carbonate nanocomposites. This fact can be attributed to the intrinsic, better thermal conductivity of the ZnO nanoparticles. Several models were used for prediction of the TC in the nanocomposites. In the PP/ZnO nanocomposites the TC values correlated well with the values predicted by the Series, Maxwell, Lewis and Nielson, Bruggeman, and De Loor models up to 10 wt%.     

A Study on Effect of Waviness on Mechanical Properties of Multi-Walled Carbon Nanotube/Epoxy Composites Using Modified Halpin–Tsai Theory

In order to improve the precision in prediction of mechanical properties of multi-walled carbon nanotubes (MWNTs)/epoxy composites, the effect of waviness of nanotubes is considered by applying a correction factor to a modified Halpin–Tsai equation. Data validation was carried out through the comparison of theoretical data with real mechanical test results obtained by the authors and in the literature. Tensile tests of various weight percents (wt%) of MWNT/epoxy composites were carried out to obtain the mechanical properties of MWNT/epoxy composites. Applicability of the proposed modification of Halpin–Tsai equation was endorsed by the experimental results and was found to be more accurate in comparison with results obtained from the same equation without considering the waviness effect.     

Hybrid Polyurethane-Poly(2-hydroxyethyl methacrylate) Semi-IPN–Silica Nanocomposites: Interfacial Interactions and Glass Transition Dynamics

Polyurethane-poly(2-hydroxyethyl methacrylate) semi-IPN-silica nanocomposites with low content (0.25 and 3 wt%) of differently functionalized 3-D fumed silica nanoparticles were studied using a combined AFM/DSC/CRS approach over the ?100 to 160°C range. The pronounced heterogeneity of the PHEMA and PU glass transitions’ dynamics and the effects of considerable suppression of dynamics and increasing elastic properties by silica additives were shown. It was caused by formation of peculiarly cross-linked structures due to “double hybridization,” in particular via selective covalent bonding of the silica surface, functionalized by ?OH, ?NH₂ or ?CH?CH₂ groups, with the matrix constituents. The silica dispersion remained unchanged in these nanocomposites; therefore the relationships between interfacial interactions and dynamics/modulus behavior could be followed.     

Application of Halpin–Tsai equation to microfibril reinforced polypropylene/poly(ethylene terephthalate) composites

While the main goal of the first part of this study was to check the applicability of the Tsai–Hill equation to a polymer-polymer microfibril reinforced composite (MFC), in which the reinforcing elements represented microfibrils with a diameter around 1–3 μm and aspect ratio of about 100, in the present paper a similar goal involves the Halpin–Tsai equation. In addition, using compatibilised blends an attempt is made to shed light on the mechanism of the microfibril formation during drawing of isotropic polymer blends. For this purpose, injection moulded dog-bone test samples of blends of polypropylene/poly(ethylene terephthalate) (PP/PET) (60/40 wt%) have been prepared starting from highly drawn bristles, also from blends containing 0–9 wt% compatibiliser (ethylene-glycidyl methacrylate). The MFC structure of the test sample is established by X-ray and scanning electron microscope (SEM) analyses. The tensile data are compared with those predicted according to the Halpin–Tsai equation. It is shown that the predicted values are slightly higher than the measured ones and this finding is explained by the presence of a compatibiliser resulting in much lower aspect ratios of the microfibrils. The suggested mechanism of the microfibril formation is based on the coalescence of the individual elongated spheres during drawing. The SEM observations also show that the compatibilised blends contain much shorter microfibrils because the compatibiliser prevents the coalescence process.     

The Effect of Structure of the Clay Modifier on the Morphology and Properties of Polystyrene/Clay Nanocomposites Prepared via In Situ Suspension Polymerization

Polystyrene (PS)/organoclay nanocomposites were prepared via free radical suspension polymerization. Two kinds of organoclay were used, labeled KT and KD, modified by trimethyloctadecyl ammonium (TM) and dimethyldioctadecyl ammonium (DM) ions, respectively. Nanocomposites containing various amounts of both of the organoclay nanoparticles (1, 3, and 5 wt%) were prepared. The wide angle X-ray diffraction (WAXD) results revealed intercalation in both of the nanocomposites. The greatest improvement in thermal stability of the nanocomposites was achieved with 5 wt% of organo-MMT for both of the clays. The nanocomposite containing 3 wt% of KT organo-MMT showed the greatest improvement of storage modulus. When the organoclay content exceeded 3 wt%, the storage moduli decreased compared to the nanocomposite filled with 3 wt% of the organoclay. D-spacing calculations using Bragg's law and WAXD data showed that the KT and KD nanoparticles were intercalated within the PS matrix, but with different extents of intercalation. The styrene conversions of the as-polymerized nanocomposite samples were obtained by a gravimetric method. The results showed that conversion decreased with incorporation of organoclay in the reaction recipe. Particle size was also increased by increasing nanoclay content.     

Mechanical and electrical properties of radiation-vulcanized natural rubber latex with waste eggshell powder as bio-fillers

ABSTRACT

This work investigated the mechanical, physical, morphological, and electrical (volume) resistivity properties of radiation-vulcanized natural rubber latex (RVNRL) with additions of waste eggshell (WES) powder, which contained primarily CaCO₃ (calcite). The results showed that increasing gamma irradiation doses from 0 to 30?kGy in 10-kGy increments led to decreases in the swelling ratio and elongation at break but increases in the crosslink density, tensile modulus at 500% elongation, and tensile strength of the composites. The results also suggested that increasing the WES contents from 0 to 2, 4, or 6 parts per hundred parts of rubber by weight (phr) in the composites improved the tensile modulus at 500% elongation, tensile strength, hardness (Shore A), and electrical (volume) resistivity. In addition, after undergoing thermal aging at 70°C for 96?h, the tensile modulus and hardness (Shore A) increased, while the tensile strength and elongation at break decreased. This work also compared the properties of WES/RVNRL with commercial CaCO₃/RVNRL samples at the same 4-phr content. The results indicated that both composites had similar tensile properties, implying possible replacement of commercial CaCO₃ with WES powder as an effective reinforcing filler in RVNRL.     

One-pot green fabrication and antibacterial activity of thermally stable corn-like CNC/Ag nanocomposites

Corn-like cellulose nanocrystals/silver (CNC/Ag) nanocomposites were prepared by formic acid/hydrochloric acid hydrolysis of commercial microcrystalline cellulose (MCC), and redox reaction with silver ammonia aqueous solution (Ag(NH₃)₂(OH)) in one-pot green synthesis, in which the preparation and modification of CNCs were performed simultaneously and the resultant modified CNCs could be as reducing, stabilizing and supporting agents for silver nanoparticles. The influences of the Ag⁺ ion concentrations on the morphology, microstructure, and properties of the CNC/Ag nanocomposites were investigated. It is found that corn-like CNC/Ag nanocomposites containing Ag nanoparticles with diameter of about 20–40 nm were obtained. Compared to the MCCs, high crystallinity of 88.5 % and the maximum degradation temperature (T _max) of 364.5 °C can be achieved. Moreover, the CNC/Ag nanocomposites showed strong antibacterial activity against both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus. Furthermore, such nanocomposites can act as bifunctional nanofillers to improve thermal stability, mechanical property, and antibacterial activity of commercial poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and poly(lactic acid).     

Properties of Poly(Lactic Acid)/ Organo-Montmorillonite Nanocomposites Prepared by Solution Intercalation

Poly(lactic acid)/organo-montmorillonite (PLA/OMMT) nanocomposite films were prepared through solution intercalation using dichloromethane as solvent. X-ray diffraction indicated that organo-montmorillonite (OMMT) was well intercalated and the interlayer spacing d increased by 0.94–1.47 nm. Transmission Electron Microscopy showed that a majority of OMMT was fully exfoliated and uniformly dispersed in the PLA matrix at low filler loading, whereas more intercalated tactoids and aggregates of OMMT existed at high loading. The crystallinity of PLA was hardly changed with the addition of OMMT. Additionally, CO₂ permeability and water vapor transmission rate of the composite films were reduced with increasing content of OMMT. At 5 wt% OMMT loading, CO₂ permeability and water vapor transmission rate were reduced by 75.8% and 23.9%, respectively. The tensile strength (TS) and Young's modulus of the PLA/OMMT nanocomposites were first enhanced, and then decreased with increasing content of OMMT. Compared with pure PLA, a 83.8% increase in the Young's modulus and a 76.0% improvement in TS were obtained with the addition of 3 wt% OMMT.     

A Study on the Rheological and Magnetic Properties of Polymer-Bonded Magnets Using Polycarbonate as the Bonding Material

The effect of three metal oxides on the magnetic properties of polymer bonded magnets (PBMs) was studied. The three PBMs, using polycarbonate (PC) as binder and 5 wt% of Fe₃O₄, Fe₂O₃, or CuO nanoparticles, were prepared by melt extrusion in a twin screw extruder followed by compression molding. Transmission electron microscopic (TEM) images showed a better dispersion for the PC/Fe₃O₄ nanocomposite compared with that of the other nanocomposites. The dynamic intersection frequency (ω_c), which is related to the crossing of the G′ and G^″ curves, showed that there was more homogeneity in the PC/Fe₃O₄ and PC/Fe₂O₃ nanocomposites. The curves of saturation magnetization for the three nanocomposites showed that there was a relationship between the magnetic properties and the homogeneity of the nanoparticles studied by rheometry. Because the magnetic strength of PC/Fe₃O₄ was greater than that of the other nanocomposites, it was concluded that not only the intrinsic magnetic property of the filler was an important factor to increase the magnetic property, but also the homogeneity of the filler within the matrix had an important role.     

Crystallization and Thermal Conductivity of CaCO3 Nanoparticle Filled Polypropylene

Isotactic polypropylene (IPP) and calcium carbonate (CaCO₃) nanocomposites were prepared by melt extrusion in a twinscrew extruder. The effect of CaCO₃ nanoparticles on the crystallization and thermal conductivity (TC) of PP was studied by thermal analysis (DSC) and thermal conductivity analysis (TCA). The introduction of CaCO₃ nanoparticles resulted in an increase in crystallinity. The incorporation of this nanoparticle (up to 15 phr) caused a significant increase of TC of PP, especially for larger filler content. Several models were used for prediction of TC of the nanocomposites. The experimental results had a good correlation with the Ce Wen Nan Model.     

Enhanced energy storage in polyvinylidenefluoride (PVDF) + BaZrO<Subscript>3</Subscript> electroactive nanocomposites

PVDF + BaZrO₃ electroactive nanocomposite thin film has been prepared by solution casting method. The structural analysis was carried out by using x-ray diffraction pattern and atomic force microscopy (AFM). Generally, the performance of dielectric capacitors toward higher energy density and higher operating temperatures has been drawing increased interest. In this regard, the present study was focussed on the fabrication and characterization of PVDF + BaZrO₃ electroactive nanocomposites in view of enhancing the energy density at elevated temperature. Cole-Cole plot is an agreement with multiple relaxation process in electroactive nanocomposites. Dielectric energy storage performance is assessed for PVDF nanocomposites with different wt% of BaZrO₃ at different frequencies and temperature. It has been observed that with increase of temperature, the permittivity increased while the energy density slightly decreased but significantly higher than pure polymer PVDF. A high energy density of 6.88 J/cm³ was obtained for BaZrO₃ electroactive nanocomposites at 50 °C and 5.06 J/cm³ at 70 °C. Overall, the testing results indicate that using nanocomposites of PVDF and BaZrO₃ as a dielectric component is promising for implementation to preserve high energy density values up to temperatures of 70 °C.The enhancement of dielectric permittivity and the energy density is attributed due to increase of interracial charge density. The effect of BaZrO₃ nanoparticles in energy density of PVDF is first time reported.     

Preparation of SnO2–graphene from SnS–graphene oxide for enhanced reversible lithium ion storage

SnO₂–graphene nanocomposites (SnO₂–GNS) have been prepared through a simple hydrothermal reaction with SnS–graphene oxide composites as the precursor. The composite material as prepared was characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, Brunauer–Emmett–Teller analysis, and thermogravimetric analysis. The results indicate that SnO₂ nanoparticles possess a good dispersion on the surface of graphene. Electrochemical tests demonstrate the high reversible lithium ion storage properties of SnO₂–GNS. The nanocomposites retained a reversible capacity of 503 mAh?g^?1 after 40 cycles. Moreover, the composite material exhibited higher capacity and better cyclic performance compared to free SnO₂ nanoparticles physically mixed with graphene in the relative weight ratio. The results suggest that the combination of SnO₂ and graphene leads to synergistic performance, which enhances lithium ion storage properties of the overall system.     

Composite coatings of polyamide/graphene: microstructure,mechanical, thermal,and barrier properties

This effort reports on novel fluorinated polyamide (FPA) and polyamide 1010 (PA1010)-based blends and graphene reinforced nanocomposite. PA1010/FPA (80:20) blend was opted as matrix material on the basis of molecular weight, thermal, and shear stress performance. Graphene was obtained through in situ chemical method of graphene oxide reduction. PA1010/FPA/Graphene nanocomposites was developed using various graphene loadings (up to 5 wt.%). Thin film coatings were prepared on glass substrate. Consequently, the PA1010/FPA/Graphene attained regular spongy morphological pattern. PA1010/FPA/Graphene 3 also showed improved T₀ and T_max of 534 and 591 °C relative to the neat blend (T₁₀ 423 °C; T_max 551 °C). Limiting oxygen index measurement indicated better non-flammability of PA1010/FPA/Graphene 1–3 nanocomposite series (57–60%) relative to the blend series (28–31%). UL94 tests also showed V-0 rating for nanocomposites. Furthermore, PA1010/FPA/Graphene 3 nanocomposite revealed significantly high tensile strength (62 MPa), flexural modulus (1690 MPa), and adhesive properties to be utilized as coating materials. The nanocomposite coatings also displayed outstanding barrier properties against O₂ and H₂O compared with neat blends.     

Glass transition temperature and thermal stability of ZnS/PMMA nanocomposites

In this article, ZnS nanoparticles were prepared by wet chemical precipitation method using zinc sulphate (ZnSO₄), sodium sulphide (Na₂S) and thio-glycerol. These nanoparticles were characterized through X-ray diffraction (XRD) and transmission electron microscope (TEM) measurements. The solution-based processing was used to prepare Poly methyl methacrylate (PMMA) nanocomposites with different weight percents (0, 2, 4, 6 and 8) of ZnS nanoparticles. The obtained ZnS/PMMA nanocomposites were characterized through XRD, scanning electron microscope and TEM measurements. The dynamic mechanical analyzer was used to obtain the storage modulus and glass transition temperature (T _g) of the nanocomposites. The apparent activation energy of the glass transition region was also determined using the Vogel–Fulcher–Tammann equation. The results indicated that the thermal stability of ZnS/PMMA nanocomposites was higher than PMMA and 6 wt. % of ZnS nanoparticles in PMMA matrix showed the maximum activation energy, which indicated that this nanocomposite had higher thermal stability than other composites.     

Grain size effects on dynamics of Li-ions in Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> glass-ceramic nanocomposites

Li₃V₂(PO₄)₃ glass-ceramic nanocomposites, based on 37.5Li₂O-25V₂O₅-37.5P₂O₅ mol% glass, were successfully prepared via heat treatment (HT) process. The structure and morphology were investigated by X-ray diffraction (XRD) and scanning electron microscope (SEM). XRD patterns exhibit the formation of Li₃V₂(PO₄)₃ NASICON type with monoclinic structure. The grain sizes were found to be in the range 32–56 nm. The effect of grain size on the dynamics of Li⁺ ions in these glass-ceramic nanocomposites has been studied in the frequency range of 20 Hz–1 MHz and in the temperature range of 333–373 K and analyzed by using both the conductivity and modulus formalisms. The frequency exponent obtained from the power law decreases with the increase of temperature, suggesting a weaker correlation among the Li⁺ ions. Scaling of the conductivity spectra has also been performed in order to obtain insight into the relaxation mechanisms. The imaginary modulus spectra are broader than the Debye peak-width, but are asymmetric and distorted toward the high frequency region of the maxima. The electric modulus data have been fitted to the non-exponential Kohlrausch–Williams–Watts (KWW) function and the value of the stretched exponent β is fairly low, suggesting a higher ionic conductivity in the glass and its glass-ceramic nanocomposites. The advantages of these glass-ceramic nanocomposites as cathode materials in Li-ion batteries are shortened diffusion paths for Li⁺ ions/electrons and higher surface area of contact between cathode and electrolyte.     

Analysis of fiber optic SPR sensor utilizing platinum based nanocomposites

SPR based fiber optic sensor using nanocomposite is presented. Nanocomposites comprising of Pt nanoparticles with various volume fractions embedded in dielectric matrices of TiO₂ and SnO₂ are considered. Sensitivity enhances with increase in thickness of nanocomposite and volume fraction of nanoparticles for both nanocomposites. Optimized thicknesses are obtained to be 40 and 50 nm for Pt–TiO₂ and Pt–SnO₂ nanocomposites respectively while optimized volume fraction is found to be 0.85 for both nanocomposites. 40 nm thick Pt–TiO₂ nanocomposite based sensor with 0.85 volume fraction possesses utmost sensitivity.     

Mechanical Properties of Linear Low‐density Polyethylene (LLDPE)/clay Nanocomposites: Estimation of Aspect Ratio and İnterfacial Strength by Composite Models

In this study, mechanical properties of the linear low‐density polyethylene (LLDPE)/org‐clay nanocomposites prepared by melt processing were investigated. Aspect ratio (A _f ) of the clay layers were estimated by using the Halpin‐Tsai (H‐T) micromechanical model based on the enhancement of the Young's modulus (E) with the clay loading (φ). Strength of interfacial interactions (τ and B parameters) between the clay layers and polymer chains were also quantified by two indirect modeling approaches based on the improvement in tensile strength (or yield stress) of the nanocomposite samples. Interfacial strength parameters, τ and B, were found as about 5 MPa and 17.3, respectively. The average value of A _f was calculated as ～35 by the H‐T model. In the TEM study, it was observed that the nanocomposite samples showed mixed morphology that could be defined as some exfoliated layers, intercalated clay stacks, and two to three layered tactoids present together within the samples. An estimated A _f value was also confirmed by the TEM study. On the other hand, it was also shown that the A _f value is consistent with previously reported values calculated by the modeling of melt rheological data of samples obtained from dynamic oscillatory shear measurements.     

Hybrid nanostructured materials with tunable magnetic characteristics

Novel titanium oxide (TiO₂) nanoparticles were fabricated via a modified propanol drying step. These nanoparticles were loaded with anti-cancer drug paclitaxel (PTX) to yield PTX-TiO₂ nanocomposites. The nanocomposites were characterized for their size and surface morphology employing nanoparticle tracking analysis (NTA) and scanning electron microscopy (SEM). The SEM images showed spherical particles with smooth surface and narrow size distribution of ~30–40 nm, which was also supported by NTA analysis data. The drug loading efficiency of the air-dried nanoparticles was observed to be ~63.61 % while those prepared through propanol-induced drying step showed ~69.70 %, thereby demonstrating higher efficiency of the latter. In vitro pH-dependent release of the loaded PTX was observed with higher release at acidic pH compared with physiological pH. Cell uptake studies suggested of time-dependent internalization of nanocomposites with significant improvement in uptake by increasing incubation time from 2 to 24 h, as evidenced by flow cytometry. Further, the cell viability as a measure of anti-cancer activity revealed that cell viability upon exposure to PTX only was 40.5 % while that of PTX-TiO₂ nanocomposite showed 21.6 % viability after 24 h, suggesting better anti-cancer efficacy of nanocomposites. Apoptosis studies revealed that cells treated with PTX-TiO₂ nanocomposites possessed more amount of apoptotic bodies as compared to those treated with PTX only.     

Phase transformations in CaCO3/iron oxide composite induced by thermal treatment and laser irradiation

Calcium carbonate (CaCO₃)/iron oxide composites were synthesized through a simple one‐step impregnation procedure by mixing iron oxide nanoparticles (γ‐Fe₂O₃ and Fe₃O₄) of about 6 nm in size and CaCO₃ microparticles (Φ = 2 µm–8 µm, vaterite phase). The morphology and structural properties of CaCO₃, iron oxide nanoparticles and CaCO₃/iron oxide composites were characterized as a function of low iron content (0 %w to 3.2 %w) by scanning electron microscopy and transmission electron microscopy, X‐ray diffraction and ⁵⁷Fe Mössbauer spectrometry. The phase transformations induced by thermal treatment and laser irradiation were investigated in situ by X‐ray thermodiffraction (XRTD) and Raman spectroscopy. We have shown that the phase transformations observed by XRTD are also observed under laser irradiation as a consequence of the absorption of the laser irradiation by iron oxide nanoparticles. Copyright © 2012 John Wiley & Sons, Ltd.     

Styrene Butadiene Rubber/Epoxidized Natural Rubber (SBR/ENR50) Nanocomposites Containing Nanoclay and Carbon Black as Fillers for Application in Tire-Tread Compounds

Nanocomposite vulcunizates based on a SBR/ENR50 (50/50%wt) rubber blend containing nanoclay (5 or 10 phr) with and without carbon black (CB 20 phr) were prepared by melt blending in an internal mixer. The compound containing 35 phr carbon black (only) was prepared as a reference sample. Microstructure of nanocomposite samples was investigated by using X-ray diffraction (XRD), melt rheo-mechanical spectroscopy (RMS), and scanning electron microscopy (SEM). The XRD patterns revealed that the distance between the clay layers were increased by adding CB to the nanocomposite samples; they caused better diffusion of chains between the layers and resulted in an intercalated structure. The RMS results also indicated the formation of the filler-filler networks. SEM images of fracture surfaces showed the presence of much roughness in the samples containing both nanoclay and CB compared to the other samples. The results obtained from application of the Flory–Rhener equation showed a high crosslink density for the sample with 10 phr nanoclay and 20 phr CB. Dynamic mechanical behavior, mechanical properties, and abrasion resistance of the nanocomposites were evaluated. The results indicated that the sample containing 10 phr nanoclay and 20 phr CB had an increased dynamic elastic modulus, reduced maximum loss factor (tanδ)_max,, and an improved tensile strength and abrasion resistance compared to the reference sample. Also, this sample showed the lowest maximum loss factor, at 50–60°C, so it can be a candidate for tire-tread application.