Influence of charged particle bombardment and sputtering parameters on the properties of HfO2 films prepared by dc reactive magnetron sputtering

HfO₂ films prepared on glass substrates by dc reactive magnetron sputtering in an Ar + O₂ atmosphere are investigated. The films are polycrystallized with a pure monoclinic phase, and the crystallization strongly relates to the technology environment. Charged particle bombardment mainly caused by negative oxygen ions during sputtering on the films results in rougher surface morphology and worse crystalline property. Influence of sputtering pressure, substrate temperature and Ar:O₂ flow ratio is studied. The main orientations of the films are (−1 1 1) and (1 1 1). The (−1 1 1) orientation is stable, but (1 1 1) orientation is very sensitive to the sputtering condition, and it can be suppressed effectively by introducing charged particle bombardment, lowing sputtering pressure and increasing oxygen concentration.     

Characteristics of N-doped TiO2 thin films grown on unheated glass substrate by inductively coupled plasma assisted dc reactive magnetron sputtering

N-doped TiO₂ thin films have been deposited on unheated glass substrates by an inductively coupled plasma (ICP) assisted direct current (dc) reactive magnetron sputtering. All films were produced in the metallic mode of sputtering in order to achieve a high deposition rate. The structures and properties of the N-doped TiO₂ films were studied by X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, field emission scanning electron microscopy and UV–Vis spectrophotometer. Experimental results show that we can obtain well crystallized N-doped anatase phase TiO₂ thin films at low deposition temperature and at high deposition rate by using the ICP assisted dc reactive magnetron sputtering process. The doping of nitrogen into TiO₂ lattices leads to a smooth shift of the absorption band toward visible light regions.     

A study of the optical properties of titanium oxide films prepared by dc reactive magnetron sputtering

TiO₂ thin films were deposited on the glass substrates by dc reactive magnetron sputtering technique at different sputtering pressures (2 × 10⁻³ to 2 × 10⁻² mbar). The films prepared at low pressures have an anatase phase, and the films prepared at high pressures have an amorphous phase. The optical properties were studied by measuring the transmittance and the ellipsometric spectra. The optical constants of the films in the visible range were obtained by fitting the transmittance combined with the ellipsometry measurements using the classical model with one oscillator. The refractive index of the films decreases from 2.5 until 2.1 as the sputtering pressure increases from 2 × 10⁻³ to 2 × 10⁻² mbar. The films prepared at the pressure higher than 6 × 10⁻³ mbar show a volume inhomogeneity. This volume inhomogeneity has been calculated by fitting the transmittance and the ellipsometric spectra. The volume inhomogeneity of the film prepared at the highest sputtering pressure is about 10%. Although the films prepared at high pressures show a large volume inhomogeneity, they have low extinction coefficients. It is suggested that the anatase phase results in more light scattering than amorphous phase does, and then a high extinction coefficient.     

The structure and photocatalytic activity of TiO2 thin films deposited by dc magnetron sputtering

This paper seeks to determine the optimal settings for the deposition parameters, for TiO₂ thin film, prepared on non-alkali glass substrates, by direct current (dc) sputtering, using a ceramic TiO₂ target in an argon gas environment. An orthogonal array, the signal-to-noise ratio and analysis of variance are used to analyze the effect of the deposition parameters. Using the Taguchi method for design of a robust experiment, the interactions between factors are also investigated. The main deposition parameters, such as dc power (W), sputtering pressure (Pa), substrate temperature (°C) and deposition time (min), were optimized, with reference to the structure and photocatalytic characteristics of TiO₂. The results of this study show that substrate temperature and deposition time have the most significant effect on photocatalytic performance. For the optimal combination of deposition parameters, the (1 1 0) and (2 0 0) peaks of the rutile structure and the (2 0 0) peak of the anatase structure were observed, at 2θ ∼ 27.4°, 39.2° and 48°, respectively. The experimental results illustrate that the Taguchi method allowed a suitable solution to the problem, with the minimum number of trials, compared to a full factorial design. The adhesion of the coatings was also measured and evaluated, via a scratch test. Superior wear behavior was observed, for the TiO₂ film, because of the increased strength of the interface of micro-blasted tools.     

Characterization of TiO2/Au/TiO2 films deposited by magnetron sputtering on polycarbonate substrates

Transparent and conducting TiO₂/Au/TiO₂ (TAuT) films were deposited by reactive magnetron sputtering on polycarbonate substrates to investigate the effect of the Au interlayer on the optical, electrical, and structural properties of the films. In TAuT films, the Au interlayer thickness was kept at 5 nm. Although total thickness was maintained at 100 nm, the stack structure was varied as 50/5/45, 70/5/25, and 90/5/5 nm.In XRD pattern, the intermediate Au films were crystallized, while all TAuT films did not show any diffraction peaks for TiO₂ films with regardless of stack structure. The optical and electrical properties were dependent on the stack structure of the films. The lowest sheet resistance of 23 Ω/□ and highest optical transmittance of 76% at 550 nm were obtained from TiO₂ 90 nm/Au 5 nm/TiO₂ 5 nm films. The work function was dependent on the film stack. The highest work function (4.8 eV) was observed with the TiO₂ 90 nm/Au 5 nm/TiO₂ 5 nm film stack. The TAuT film stack of TiO₂ 90 nm/Au 5 nm/TiO₂ 5 nm films is an optimized stack that may be an alternative candidate for transparent electrodes in flat panel displays.     

Influence of deposition atmosphere on photocatalytic activity of TiO2/SiOx double-layers prepared by RF magnetron sputtering

TiO₂/SiO_x double-layers have been prepared at room temperature by RF magnetron sputtering. The TiO₂ top-layer was deposited in an Ar atmosphere, while the SiO_x bottom-layer was deposited in an Ar/O₂ atmosphere. Samples were characterized using X-ray photoelectron spectroscopy, scanning electron microscopy, atomic force microscopy, and photoluminescence techniques. The photocatalytic activity of the samples was evaluated by the photodegradation of methylene blue; the results showed that the photocatalytic activity of the TiO₂/SiO_x double-layers was superior to that of the TiO₂ single-layers. The presence of the SiO_x bottom-layer improved the photocatalytic activity of the TiO₂ layer because it may act as a trap for electrons generated in the TiO₂ layer thus preventing electron-hole recombinations.     

Growth and properties of YAlO film synthesized by RF magnetron sputtering

YAlO films are synthesized on (1 0 0)-oriented Si substrates by RF magnetron sputtering method. Al₂O₃ wafer is used as a target material, and some small pieces of Y bulk material are put on the Al₂O₃ target to synthesize YAlO films. Y composition ratio is varied from 0 to 34%. Amorphous YAlO films are characterized. An electrical resistivity as high as 3.4 × 10¹⁴ Ω-cm is achieved for the YAlO film with Y composition ratio of 10%. The dielectric constant increases with increasing Y composition ratio, and the YAlO film with Y composition ratio of 34% has a dielectric constant of 10.2. The bandgap energy of the YAlO film is suggested to be wider than 6.5 eV. YAlO films with a surface roughness of 0.4-1.3 nm are obtained irrespective of the Y composition ratio.     

TiO2/polyaniline nanocomposite films prepared by magnetron sputtering combined with plasma polymerization process

Radiofrequency plasma polymerization in combination with direct current reactive magnetron sputtering is utilized for the synthesis of TiO₂/plasma polymerized aniline nanocomposite thin films. In the composite film, X-ray diffraction measurements reveal formation of nanocrystalline rutile TiO₂ of crystallite size 3.6 nm. Due to continuous bombardment of plasma species during simultaneous magnetron sputtering and plasma polymerization, the precursors of polymerization are broken and few functional groups are retained in the composite film. The plasma polymerized aniline has the direct optical band gap of 3.55 eV and the nanocrystalline rutile TiO₂ is wide gap semiconductor with indirect gap of 3.20 eV which suggests the existence of an energy barrier at the interface in the composite form. The ac conductivity of composite film shows significant improvement as compared to plasma polymerized aniline film and sputtered rutile TiO₂ film. The composite film may find potential application as antistatic coatings.     

磁控溅射法合成纳米β-FeSi2/a-Si多层结构

β-FeSi₂作为一种环境友好的半导体材料，颗粒化及非晶化正在成为提高其应用性能和改善薄膜质量、膜基界面失配度的有效途径.利用射频磁控溅射法在单晶Si基体上沉积Fe/Si多层膜，合成纳米β-FeSi₂/Si多层结构.通过透射电子显微镜、高分辨电子显微术等分析手段，研究了多层结构和制备工艺之间的相互关系.研究结果表明，采用磁控溅射Fe/Si多层膜的方法，不需要退火就可以直接沉积得到β-FeSi₂相小颗粒.β-FeSi₂相 关键词： 2')" href="#">β-FeSi₂ 磁控溅射 透射电子显微镜 半导体薄膜     

Effect of RF power and sputtering pressure on the structural and optical properties of TiO2 thin films prepared by RF magnetron sputtering

TiO₂ thin films were deposited onto quartz substrates by RF magnetron sputtering. The samples deposited at various RF powers and sputtering pressures and post annealed at 873 K, were characterized using X-ray diffraction (XRD), micro Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), UV-vis spectroscopy and photoluminescence (PL) spectroscopy. XRD spectrum indicates that the films are amorphous-like in nature. But micro-Raman analysis shows the presence of anatase phase in all the samples. At low sputtering pressure, increase in RF power favors the formation of rutile phase. Presence of oxygen defects, which can contribute to PL emission is evident in the XPS studies. Surface morphology is much affected by changes in sputtering pressure which is evident in the SEM images. A decrease in optical band gap from 3.65 to 3.58 eV is observed with increase in RF power whereas increase in sputtering pressure results in an increase in optical band gap from 3.58 to 3.75 eV. The blue shift of absorption edge in all the samples compared to that of solid anatase is attributed to quantum size effect. The very low value of extinction coefficient in the range 0.0544-0.1049 indicates the excellent optical quality of the samples. PL spectra of the films showed emissions in the UV and visible regions.