Synthesis and luminescence investigation of RE (Eu, Tb and Ce)-doped lithium silicate (Li2SiO3)

Synthesis and photoluminescence (PL) investigations of lithium metasilicate doped with Eu³⁺, Tb³⁺ and Ce³⁺ were carried out. PL spectra of Eu-doped sample showed peaks corresponding to the ⁵D₀→⁷F_j (j=1, 2, 3 and 4) transitions under ultraviolet excitation. Strong red emission coming from the hypersensitive ⁵D₀→⁷F₂ transition of Eu³⁺ ion suggested the presence of the dopant ion in structurally disordered environment. Tb³⁺-doped silicate sample showed blue-green emission corresponding to the ⁵D₄→⁷F_j (j=6, 5 and 4) transitions. Ce-doped sample under excitation from UV, showed a broad emission band in the region 350-370 nm with shoulders around 410 nm. The fluorescence lifetimes of Eu³⁺ and Tb³⁺ ions were found out to be 790 and 600 μs, respectively. For Ce³⁺, the lifetime was of the order of 45 ns. PL spectra of the europium- and terbium-doped samples were compared with commercial red (Y₂O₃:Eu³⁺) and green (LaPO₄:Tb³⁺) phosphors, respectively. It was found that the emission from the doped silicate sample was 37% of the commercial phosphor in case of the Tb-doped sample and 8% of the commercial phosphor in case of the Eu-doped sample.     

White-light long-lasting phosphorescence from Tb-activated Y2O2S phosphor

The white-light long-lasting phosphors Y₂O₂S:Tb³⁺, Sr²⁺ or/and Zr⁴⁺ were prepared and studied. The white-light afterglow emission after the irradiation with 254 nm UV are composed of the blue light emission and the yellowish-green light emission, originating from the transitions of ⁵D₃→⁷F₅, ⁵D₄→⁷F₅ in Tb³⁺ when the Tb³⁺ concentration is not higher than 0.3 at%. The codoped Sr²⁺ and Zr⁴⁺ ions act as trap-creating ions. The afterglow can last over 21 min in the dark for Y₂O₂S:Tb³⁺0.3%, Sr²⁺4%, Zr⁴⁺4% after irradiation by 254 nm ultraviolet light. Y₂O₂S:Tb³⁺ may be a promising material for the development of white-light long-lasting phosphor since the Tb³⁺ has a high luminescent efficiency and the dominant excitation band of 4f →5d is located at 220-300 nm.     

Enhanced luminescence of Tb by efficient energy transfer from Ce in Sr2B5O9Cl host

Ce³⁺ and Tb³⁺ co-doped Sr₂B₅O₉Cl phosphors with intense green emission were prepared by the conventional high-temperature solid-state reaction technique. A broad band centered at about 315 nm was found in phosphor Sr₂B₅O₉Cl: Ce³⁺, Tb³⁺ excitation spectrum, which was attributed to the 4f-5d transition of Ce³⁺. The typical sharp line emissions ranging from 450 to 650 nm were originated from the ⁵D₄ → ⁷F_J (J = 6, 5, 4, 3) transitions of Tb³⁺ ions. The photoluminescence (PL) intensity of green emission from Tb³⁺ was enhanced remarkably by co-doping Ce³⁺ in the Tb³⁺ solely doped Sr₂B₅O₉Cl phosphor because of the dipole-dipole mechanism resonant energy transfer from Ce³⁺ to Tb³⁺ ions. The energy transfer process was investigated in detail. In light of the energy transfer principles, the optimal composition of phosphor with the maximum green light output was established to be Sr_1.64Ce_0.08Tb_0.1Li_0.18B₅O₉Cl by the appropriate adjustment of dopant concentrations. The PL intensity of Tb³⁺ in the phosphor was enhanced about 40 times than that of the Tb³⁺ single doped phosphor under the excitation of their optimal excitation wavelengths.     

Green emission from Tb-doped SrSi2O2N2 phosphors under ultraviolet light irradiation

Tb-doped SrSi₂O₂N₂ phosphors with promising luminescent properties were synthesized by the conventional solid-state reaction method, characterized by powder X-ray diffraction and studied by photoluminescence excitation and emission spectra. The synthesized materials exhibited a weak blue emission and a strong green emission in the region of 400-470 nm and 480-650 nm, which are attributed to ⁵D₃→⁷F_j (j=5, 4, 3) and ⁵D₄→⁷F_j (j=6, 5, 4, 3) transitions of Tb³⁺, respectively. The green emission from ⁵D₄→⁷F₅ at 543 nm showed the highest intensity under the optimized concentration of 0.1 mol, after which the quenching concentration became relevant. The quenching behavior of the emission of Tb³⁺ was explained by the cross-relaxation of its excited state.     

A white light emitting phosphor Sr1.5Ca0.5SiO4:Eu, Tb, Eu for LED-based near-UV chip: Preparation, characterization and luminescent mechanism

In this work, we report preparation, characterization and luminescent mechanism of a phosphor Sr_1.5Ca_0.5SiO₄:Eu³⁺,Tb³⁺,Eu²⁺ (SCS:ETE) for white-light emitting diode (W-LED)-based near-UV chip. Co-doped rare earth cations Eu³⁺, Tb³⁺ and Eu²⁺ as aggregated luminescent centers within the orthosilicate host in a controlled manner resulted in the white-light phosphors with tunable emission properties. Under the excitation of near-UV light (394 nm), the emission spectra of these phosphors exhibited three emission bands: one broad band in the blue area, a second band with sharp lines peaked in green (about 548 nm) and the third band in the orange-red region (588-720 nm). These bands originated from Eu²⁺ 5d→4f, Tb³⁺⁵D₄→⁷F_J and Eu³⁺⁵D₀→⁷F_J transitions, respectively, with comparable intensities, which in return resulted in white light emission. With anincrease of Tb³⁺ content, both broad Eu²⁺ emission and sharp Eu³⁺ emission increase. The former may be understood by the reduction mechanism due to the charge transfer process from Eu³⁺ to Tb³⁺, whereas the latter is attributed to the energy transfer process from Eu²⁺ to Tb³⁺. Tunable white-light emission resulted from the system of SCS:ETE as a result of the competition between these two processes when the Tb³⁺ concentration varies. It was found that the nominal composition Sr_1.5Ca_0.5SiO₄:1.0%Eu³⁺, 0.07%Tb³⁺ is the optimal composition for single-phased white-light phosphor. The CIE chromaticity calculation demonstrated its potential as white LED-based near-UV chip.     

Photoluminescence properties and effects of dopant concentration in Bi2ZnB2O7:Tb phosphor

A novel green phosphor, Tb³⁺ doped Bi₂ZnB₂O₇ was synthesized by conventional solid state reaction method. The phase of synthesized materials was determined using the XRD, DTA/TG and FTIR. The photoluminescence characteristics were investigated using spectrofluorometer at room temperature. Bi₂ZnB₂O₇:Tb³⁺ phosphors excited by 270 nm and 485 nm wavelengths. The emission spectra were composed of three bands, in which the dominated emission of green luminescence Bi₂ZnB₂O₇:Tb³⁺ attributed to the transition ⁵D₄ → ⁷F₅ is centered at 546 nm. The dependence of the emission intensity on the Tb³⁺ concentration for the Bi_2−xTb_xZnB₂O₇ (0.01 ≤ x ≤ 0.15) was studied and observed that the optimum concentration of Tb³⁺ in phosphor was 13 mol% for the highest emission intensity at 546 nm.     

Comparative structural and photoluminescent study of Eu-doped La2O3 and La(OH)3 nanocrystalline powders

Eu³⁺-doped La₂O₃ nanocrystalline powder was prepared by polymer complex solution method and further used for preparation of Eu³⁺-doped La(OH)₃. Structural and optical characterization was carried out by powder X-ray diffraction and photoluminescent spectroscopy. XRD measurements confirmed the formation of hexagonal La₂O₃ and its recrystallization into La(OH)₃ in a humid atmosphere. Excitation spectra show redshift of host lattice and charge transfer emission bands in La(OH)₃ while bands that correspond to Eu³⁺f–f transitions are placed at same wavelengths in both samples. Photoluminescence spectra recorded over the temperature range from 10 K to 300 K show that intensities of emission lines in Eu³⁺-doped La₂O₃ do not depend on temperature as much as in La(OH)₃ sample. Observed dominant ⁵D₀→⁷F₂ and markedly visible ⁵D₀→⁷F₀ emissions in doped La₂O₃ indicate that Eu³⁺ ion is located in a structural site without an inversion center. On the other hand, in Eu³⁺-doped La(OH)₃⁵D₀→⁷F₀ transition is barely visible while ⁵D₀→⁷F₂ is not prominent, and with temperature drop three ⁵D₀→⁷F_J (J=1, 2, 4) transitions become almost of the same intensity. In both La₂O₃ and La(OH)₃ structures Eu³⁺ ion replaces La³⁺ in non-centrosymmetric C_3v and C_3h crystallographic sites, respectively, and difference in symmetry of the crystal field around europium ion is explained by comparing shape and volume of these sites. Decay times of the ⁵D₀- level recorded over the temperature range 10−300 K revealed that emission lifetime values in La₂O₃ (~0.7 ms) are almost two times higher than in La(OH)₃ (~0.4 ms), and unlike in La₂O₃, lifetime in La(OH)₃ is temperature dependent.     

Cathodoluminescence properties of Tb3+-doped Na3YSi2O7 phosphors

Tb³⁺-doped Na₃YSi₂O₇ phosphors were prepared by the sol–gel method and then characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy, and cathodoluminescence spectroscopy. The XRD results reveal that the Tb³⁺ ions have been introduced as dopants into the Na₃YSi₂O₇ host lattice. Under low-voltage electron beam excitation, the phosphors exhibit the characteristic emissions of Tb³⁺ (⁵ D _3,4→⁷ F _J , J=3–6 transitions). The luminescence color of the phosphors can be tuned from greenish-blue to bluish-green and to green by controlling the Tb³⁺ concentration within the 0.0005–0.15 (x value). The optimum Tb³⁺ doping concentration is 10 mol%, and the “dead voltage” is approximately 1.35 kV. All results indicate that the sample is a phosphor candidate for field-emission displays.     

New promising phosphors Ba3InB9O18 activated by Eu/Tb

Borate Ba₃InB₉O₁₈ (BIBO) has been adopted as a host material for phosphors for the first time. Lanthanide ions (Eu³⁺/Tb³⁺)-doped BIBO phosphors have been synthesized by solid-state reaction and luminescent properties investigated under ultravoilet (UV) excitation. For red phosphor BIBO:Eu, dominant emission peaking at 590 nm was attributed to ⁵D₀→⁷F₁ transition of Eu³⁺, which confirmed that the local site of Eu³⁺ occupied by In³⁺ ion in BIBO crystal lattice is at inversion symmetry center. Optimum Eu³⁺ concentration of BIBO:Eu under UV excitation with 227 nm wavelength is around 40%. The green phosphor BIBO:Tb showed bright green emission at 550 with 232 nm light excited and optimal of Tb³⁺ concentration measured in BIBO is about 8%. The corresponding luminescence mechanisms of Ln-doped BIBO (Ln=Eu³⁺/Tb³⁺) were analyzed. The luminescent intensity of Tb³⁺ can be significantly improved by co-doping of Bi³⁺ in the BIBO:Tb lattice. The likely reason was proposed in terms of the different interactions of the host lattice with these ions, and of these ions with each other.     

Solvothermal synthesis and luminescence properties of Tb-doped gadolinium aluminum garnet

Different concentrations of Tb³⁺ ion-doped gadolinium aluminum garnet (GAG) nanophosphors have been synthesized by solvothermal reaction method and sintered at 1300 °C. The XRD patterns confirm that the GAG phosphors sintered at 1300 °C have a garnet structure with single cubic phase. The calculated crystallite size is about 92 nm. The SEM images of the phosphors show the spherical morphology agglomerated with many small particles. The luminescence properties of these phosphors have been carried out by the emission and excitation spectra along with lifetime measurements. The excitation spectra of GAG:Tb³⁺ phosphors consist of three broad bands due to the 4f⁸→4f⁷5d¹ transition and some sharp peaks due to the 4f⁸→4f⁸ transition. The emission spectra of the phosphors reveal two colors, such as blue due to ⁵D₃→⁷F_J transitions and green due to the ⁵D₄→⁷F_J transitions. The dynamics of the phosphors have been investigated by decay curves and the cross-relaxation process and is observed at 0.5 mol% Tb³⁺ concentration.     

Enhancement of red spectral emission intensity of Y3Al5O12:Ce phosphor via Pr co-doping and Tb substitution for the application to white LEDs

We have enhanced color-rendering property of a blue light emitting diode (LED) pumped white LED with yellow emitting Y₃Al₅O₁₂:Ce³⁺ (YAG:Ce) phosphor using addition of Pr and Tb as a co-activator and host lattice element, respectively. Pr³⁺ addition to YAG:Ce phosphor resulted in sharp emission peak at about 610 nm through ¹D₂→³H₄ transition. And when Tb³⁺ substituted Y³⁺ sites, Ce³⁺ emission band shifted to a longer wavelength due to larger crystal field splitting. Y₃Al₅O₁₂:Ce³⁺, Pr³⁺ and (Y_1−xTb_x)₃Al₅O₁₂:Ce³⁺ phosphors were coated on blue LEDs to fabricate white LEDs, respectively, and their color-rendering indices (CRIs, R_a) were measured. As a consequence of the addition of Pr³⁺ or Tb³⁺, CRI of the white LEDs improved to be R_a=83 and 80, respectively. Especially, blue LED pumped (Y_0.2Tb_0.8)₃Al₅O₁₂:Ce³⁺ white LED showed both strong luminescence and high color-rendering property.     

Synthesis and characterization of fast-decaying bluish green phosphors of Tb3+-doped CaSi2O2N2 for 2D/3D plasma display panels

Oxynitride phosphor powders comprising of CaSi₂O₂N₂ doped with Tb³⁺ were successfully synthesized using a high-temperature solid-state reaction method. The experimentally determined photoluminescence (PL) properties of the produced phosphors meet the requirements of 2D/3D plasma display panels (PDPs). In particular, under the excitation of vacuum ultraviolet (VUV) synchrotron radiation and ultraviolet (UV) irradiation, emission peaks corresponding to the ⁵D₃→⁷F_J (J=6, 5, 4, 3) and ⁵D₄→⁷F_J (J=6, 5, 4, 3) transitions of Tb³⁺ ions were recorded. Monitoring the ⁵D₄→⁷F₅ emission of Tb³⁺ at 545 nm, the excitation bands were assigned to the host-related absorption as well as the 4f–5d (fd) and the 4f–4f (ff) transitions of Tb³⁺. The produced phosphors can be efficiently excited at 147 nm, and have an adequately short decay time (τ_1/10=1.14 ms).     

Investigation of defect centres responsible for TL/OSL in MgAl2O4:Tb

Magnesium aluminate doped with Tb³⁺ (MgAl₂O₄:Tb³⁺) was prepared by combustion synthesis. Three thermoluminsence (TL) peaks at 120, 220 and 340 °C were observed. PL and TL emission spectrum shows that Tb³⁺ acts as the luminescent centre. Optically stimulated luminescence (OSL) was observed when stimulated by 470 nm blue light.Electron spin resonance (ESR) studies were carried out to identify the defect centres responsible for the TL and OSL processes in MgAl₂O₄:Tb³⁺. Two defect centres were identified in irradiated MgAl₂O₄:Tb³⁺ phosphor by ESR measurements which was carried out at room temperature and these were assigned to V and F⁺ centres. V centre (hole centre) is correlated to 120 and 220 °C TL peaks and F⁺ centre (electron centre), which acts as a recombination centre is correlated to 120, 220 and 340 °C.     

D3→FJ emission of Tb doped sol–gel silica

Amorphous silica samples doped with 0.1 and 1 mol% of terbium (Tb) were synthesized by the sol–gel method. In addition to the green light associated with ⁵D₄→⁷F_J transitions of Tb³⁺, the sample containing 0.1 mol% also emitted blue light as a result of ⁵D₃→⁷F_J transitions during photoluminescence (PL) measurements. As a result of concentration quenching this blue emission was not observed for the samples doped with the higher concentration (1 mol%). However the blue ⁵D₃ →⁷F_J emission was observed in the 1 mol% doped samples during cathodoluminescence (CL) measurements. Since a rough calculation indicated that the excitation rate in the CL system where the blue emission is observed may be similar to a laser PL system under conditions where the blue emission is not observed, the difference is attributed to the nature of the excitation sources. It is suggested that during the CL excitation incident electrons can reduce non-luminescent Tb⁴⁺ ions in the silica, substituting for Si⁴⁺ ions, to the excited (Tb³⁺)? state and that these are responsible for the blue emission, which does not occur during PL excitation.     

Upconversion luminescence in Yb/Tb-codoped monodisperse NaYF4 nanocrystals

Upconversion (UC) luminescence in monodisperse NaYF₄:Yb³⁺/Tb³⁺ nanocrystals was observed under diode laser excitation of 970 nm, which were synthesized by a hydrothermal method. UC emissions at 380, 413, 436 nm and at 488, 542, 584, 620 nm arise from transitions ⁵D₃(⁵G₆) → ⁷F_J(J = 6, 5, 4) and ⁵D₄ → ⁷F_J(J = 6, 5, 4, 3) of Tb³⁺ ions, respectively. UC mechanisms are proposed based on spectral, kinetic, decay time measurements, and pump power dependence analyses. Blue, green and red emissions originate from the same long-lived (milliseconds) upper ⁵D₄ state, which promises the potential applications of these monodisperse Yb³⁺/Tb³⁺-codoped NaYF₄ nanocrystals in the field of photonics, lasers and biomedicine.     

Emission analysis of Eu:MgLaLiSi2O7 powder phosphor

Newly synthesized reference MgLaLiSi₂O₇ and red luminescent Eu³⁺:MgLaLiSi₂O₇ powder phosphors have been successfully developed by a solid-state reaction method to analyze their emission and structural properties from the measurement of their XRD, SEM, FTIR and PL spectra. Emission spectra of Eu³⁺ powder phosphors have shown strong red emissions at 613 nm (⁵D₀→⁷F₂). These phosphors have also shown bright red emissions under a UV source. Based on the red emission performance, the Eu³⁺ concentration has been optimized to be at 0.3 mol%.     

Synthesis and characterization of monodisperse spherical core-shell structured SiO2@Y3Al5O12:Ce3+/Tb3+ phosphors for field emission displays

Nanocrystalline Y₃Al₅O₁₂: Ce³⁺/Tb³⁺ (average crystalline size 30 nm) phosphor layers were coated on non-aggregated, monodisperse and spherical SiO₂ particles by the sol-gel method, resulting in the formation of core-shell structured SiO₂@Y₃Al₅O₁₂:Ce³⁺/Tb³⁺ particles. X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, photoluminescence, cathodoluminescence spectra, as well as lifetimes were utilized to characterize the core-shell structured SiO₂@Y₃Al₅O₁₂:Ce³⁺/Tb³⁺ phosphor particles. The obtained core-shell structured phosphors consist of well-dispersed submicron spherical particles with a narrow size distribution. The thickness of the Y₃Al₅O₁₂:Ce³⁺/Tb³⁺ shells on the SiO₂ cores (average size about 500 nm, crystalline size about 30 nm) could be easily tailored by varying the number of deposition cycles (100 nm for four deposition cycles). Under the excitation of ultraviolet and low-voltage electron beams (1–3 kV), the core-shell SiO₂@Y₃Al₅O₁₂:Ce³⁺/Tb³⁺ particles show strong yellow-green and green emission corresponding to the 5d–4f emission of Ce³⁺ and ⁵D₄–⁷F _J (J = 6, 5, 4, 3) emission of Tb³⁺, respectively. These phosphors may have potential application in field emission displays.     

Rare earth doped lithium titanate (Li2TiO3) for potential phosphor applications

Lithium titanate ceramics doped with three rare earth (RE) ions namely Eu³⁺, Dy³⁺ and Tb³⁺ were synthesized and their photoluminescence (PL) properties were investigated. PL spectra of Eu doped sample showed peaks corresponding to the ⁵D₀→⁷F_j (j=0, 1, 2, 3 and 4) transitions under 230 nm excitation. Strong red emission coming from the hypersensitive ⁵D₀→⁷F₂ transition of Eu³⁺ ion suggested the presence of the dopant ion in a highly asymmetric environment. Dy doped samples showed the Dy³⁺ emission characteristic due to ⁴F_9/2→⁶H_15/2 and ⁴F_9/2→⁶H_13/2 transitions. Their relative intensity ratios also suggested the presence of asymmetric environment around the metal ion. In case of the Tb³⁺ doped sample blue-green emission corresponding to the ⁵D₄→⁷F_j (j=6, 5 and 4) transitions was seen. The fluorescence lifetimes of Eu³⁺, Dy³⁺ and Tb³⁺ ions were found to be 645, 900 and 740 μs, respectively. PL intensity of the individual rare earth doped samples was compared with commercial red and green phosphors. It was found that the emission from Eu doped titanate sample was 46% of the commercial red phosphor and in case of the Tb samples it was 30% when excited at 230 nm. However, the synthesized Eu doped titanate sample showed better color purity as compared to the commercial phosphor. The titanate host was doped with all the three rare earths to get white light emission from the system. The individual rare earth ion content was optimized so as to get a near white light emission. The color coordinates of the triple doped systems were evaluated and plotted on the CIE x–y diagram. Our results suggest that lithium titanate has enough potential to be a phosphor material.     

Sol-gel synthesis and photoluminescence of CaSiO3:Eu nanophosphors using novel silicate sources

In this paper, seven kinds of silane coupling reagents were employed as silicate sources to prepare CaSiO₃:Eu³⁺ phosphors by the sol-gel method. The different silicate precursors were used to adjust the microstructure and size of the resulting phosphors. The crystallite size of phosphors is in the range of 30-35 nm and some of them show regular microstructure after high-temperature thermolysis. The photoluminescence properties show that all of them exhibit the characteristic fluorescence ⁵D₀→⁷F_J (J=0, 1, 2, 3, 4) of the Eu³⁺ ion and the strongest one is the red emission at 610 nm. Furthermore, the emission quantum efficiency (η) of the ⁵D₀ Eu³⁺ excited state has been calculated to be around 33% from the emission spectrum and the lifetime of the Eu³⁺ first excited level (τ, ⁵D₀).     

Fabrication, structure and luminescence properties of polycrystalline Tb-doped Lu2SiO5 films by Pechini sol–gel method

Tb³⁺-doped lutetium oxyorthosilicate (Tb:Lu₂SiO₅, LSO) films have been successfully fabricated on carefully cleaned silicon (1 1 1) substrates by Pechini sol–gel method combined with the spin-coating technique. X-ray diffraction (XRD), photoluminescence (PL) spectra and atomic force microscopy (AFM) were employed to characterize the resultant films. XRD patterns indicated that the films were crystallized into A-type LSO phase at 1000 °C, followed by a phase transition from A-type LSO to B-type LSO occurred at 1100 °C. The AFM observation revealed that the phosphor films were uniform and crack-free, consisting of closely packed grains with an average size of 200–300 nm. The PL spectra showed the characteristic emission ⁵D₄ → ⁷F_J (J = 3–6) for Tb³⁺, The lifetime of Tb³⁺ in Tb:LSO films was 2.33 ms. The effect of heat-treatment temperature on the luminescent properties was also investigated.