Structural properties of composite cathode material LiFePO<Subscript>4</Subscript>–Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>

Composite cathode material LiFePO₄–Li₃V₂(PO₄)₃ is synthesized through a chemical reduction and lithiation using FeVO₄·xH₂O as both iron and vanadium sources. The structural properties of LiFePO₄–Li₃V₂(PO₄)₃ are investigated. X-ray diffraction results show the composite material containing olivine type LiFePO₄ and monoclinic Li₃V₂(PO₄)₃ phases. High-resolution transmission electron microscopy and energy-dispersive X-ray spectrometry results indicate that mutual doping effects take place between the LiFePO₄ and Li₃V₂(PO₄)₃ particles with V³⁺ doping the LiFePO₄ while Fe²⁺ dopes the Li₃V₂(PO₄)₃. LiFePO₄–Li₃V₂(PO₄)₃ nanocomposites are formed in the carbon webs. There is no structural compatibility between monoclinic (Li₃V₂(PO₄)₃) and olivine (LiFePO₄) domains in composite material LiFePO₄–Li₃V₂(PO₄)₃.     

Preparation and characterization of organic–inorganic hybrid compound [N(C<Subscript>4</Subscript>H<Subscript>9</Subscript>)<Subscript>4</Subscript>]<Subscript>2</Subscript>Cu<Subscript>2</Subscript>Cl<Subscript>6</Subscript>

Organic–inorganic hybrid sample [N(C₄H₉)₄]₂Cu₂Cl₆ was prepared via the reaction between copper chloride and tetrabutylammonium chloride. The compound was characterized by X-ray powder diffraction, IR, Raman, differential scanning calorimetry (DSC), DTA-TGA analysis and electrical impedance spectroscopy. DSC studies indicate a presence of one-phase transition at 343 K. The complex impedance of compound [N(C₄H₉)₄]₂Cu₂Cl₆ have been investigated in temperature and frequency ranges 300–380 K and 200 Hz–5 MHz, respectively. The Z′ and Z″ versus frequency plots are well fitted to an equivalent circuit model. The circuits consist of the parallel combination of bulk resistance R _p and constant phase elements CPE. The frequency dependence of the conductivity is interpreted in term of Jonscher's law: s(w) = s_dc + Awⁿ \sigma (\omega ){ } = {\sigma_{\rm{dc}}} + { }A{\omega^n} . The conductivity follows the Arrhenius relation. The variation of the value of these elements with temperatures confirmed the availability of the phase transition at 343 K detected by DSC and electrical measurements.     

Synthesis and characterization of Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>·LiMn<Subscript>0.33</Subscript>Fe<Subscript>0.67</Subscript>PO<Subscript>4</Subscript>/C cathode materials

A new polyanionic cathode material, Li₃V₂(PO₄)₃·LiMn_0.33Fe_0.67PO₄/C for lithium-ion batteries, was synthesized using a sol-gel method and with N,N-dimethyl formamide as a dispersion agent. The analysis of electron transmission spectroscopy and X-ray diffraction revealed that the composite contained two phases. The material has high crystallinity with a grain size of 20–50 nm. The valence states of Mn, V, and Fe in the composite were analyzed by X-ray photoelectron spectroscopy. The electrochemical kinetics in Li₃V₂(PO₄)₃ is effectively enhanced by the incorporation of LiMnPO₄ and LiFePO₄, via structure modification and reduced Li diffusion length. The Li₃V₂(PO₄)₃·LiMn_0.33Fe_0.67PO₄/C materials displayed high rate capacity and steady cycle performance with discharge capacity remained 148 mAh g^?1 after 50 cycles at the rate of 0.2C. In particular, the composite exhibited excellent reversible capacities, with the values of 157, 134, 120, 102, and 94 mAh g^?1 at charge/discharge 0.2, 0.5, 1, 2, and 5C rates, respectively.     

XRD,impedance, and Mössbauer spectroscopy study of the Li<Subscript>3</Subscript>Fe<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> + Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> composite for Li ion batteries

The synthesis procedure of the Li₃Fe₂(PO₄)₃?+?Fe₂O₃ composite is presented. The monoclinic (A type) and hematite phases were detected by X-ray diffraction after the synthesis of the composite. The structural α–β (at a temperature of 460 K) and β–γ (at a temperature of 523 K) phase transitions in the composite were indicated by the anomalies of the electrical conductivity, dielectric permittivity, and changes of activation energies of conductivity. Two phase transitions have been detected in the Li₃Fe₂(PO₄)₃?+?Fe₂O₃ composite by ⁵⁷Fe Mössbauer spectroscopy: the phase transition in Li₃Fe₂(PO₄)₃ from the paramagnetic to antiferromagnetic phase at temperature T _N?=?29.5 K and the Morin phase transition in Fe₂O₃ at temperature T _M?=?235 K.     

Structure,Ferroelectric, and Magnetoelectric Properties of Bulk PZT–NiFe<Subscript>1.9</Subscript>Co<Subscript>0.02</Subscript>О<Subscript>4 – δ</Subscript> Composites

The phase composition, microstructure, and dielectric, ferroelectric, magnetic, and magnetoelectric properties of bulk ceramic (1 – x)PZT–xNiFe_1.9Co_0.02О_{4 – δ} composites with 3–0 connectivity have been studied. Using X-ray diffraction and electron microscopy, it has been established that the ferrimagnetic (spinel- like) and ferroelectric (tetragonal perovskite-like) phases separately exist in the composites of all compositions. The simultaneous existence of ferroelectric and ferrimagnetic properties in the composites is confirmed by measuring their P(E) and σ(B) hysteresis loops and studying the temperature dependences of dielectric and magnetic properties. The synthesized composites have high magnetoelectric characteristics: their voltage coefficient at x = 0.4 is 215 mV/A at a frequency of 1 kHz and 130 V/A at an electromechanical resonance frequency of 380 kHz.     

Heat capacity of the [N(C<Subscript>2</Subscript>H<Subscript>5</Subscript>)<Subscript>4</Subscript>]<Subscript>2</Subscript>CdBr<Subscript>4</Subscript> crystal in the temperature range 80–300 K

The heat capacity of the [[N(C₂H₅)₄]₂CdBr₄ crystal is measured by the calorimetric method in the temperature range from 80 to 300 K. It is revealed for the first time that the temperature dependence of the heat capacity C _p (T) exhibits an anomaly associated with the first-order phase transition occurring at the temperature T ₁ = 226.5 K. A long relaxation of the temperature of the crystal is observed in the temperature range 150–165 K.     

O<Subscript>2</Subscript> photodesorption from AuO<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack> and Au<Subscript>2</Subscript>O<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack>

Using time-resolved photoelectron spectroscopy, the decay channels of AuO₂⁻ and Au₂O₂⁻ following photoexcitation with 3.1-eV photons have been studied. For AuO₂⁻, a state with a rather long lifetime of 30 ps has been identified. Its decay path could not be determined but photodesorption can be excluded. For Au₂O₂⁻, the spectra indicate O₂ desorption after 3.1-eV photoexcitation on a time scale of 1 ps. While comparing these results on Au _n O₂⁻ with analogous data on Ag _n O₂⁻ clusters, a discernible pattern emerges: for dissociatively bound O₂(AuO₂⁻, Ag₃O₂⁻), there are long-living excited states which do not decay by oxygen desorption, while for molecular chemisorption (Au₂O₂⁻, Ag₂O₂⁻, Ag₄O₂⁻, Ag₈O₂⁻), the 3.1-eV photoexcitation triggers fast O₂ desorption with a high quantum yield.     

<Superscript>2</Superscript>H NMR investigation of the transition to the proton glass state in the Cs<Subscript>5</Subscript>H<Subscript>3</Subscript>(SO<Subscript>4</Subscript>)<Subscript>4</Subscript> · 0.5H<Subscript>2</Subscript>O crystal

A crystal of the Cs₅H₃(SO₄)₄ · xH₂O (x ≈ 0.5) (PCHS) compound, which belongs to the family of proton conductors with a complex system of hydrogen bonds, is investigated by ²H NMR spectroscopy. The temperature and orientation dependences of the ²H NMR spectra are measured and analyzed. It is established that, upon transition to the glassy phase at the temperature T _g = 260 K, the parameters characterizing the proton exchange between positions in hydrogen bonds remain unchanged to within the limits of experimental error. The protons in the two-dimensional network of hydrogen bonds in the (001) plane are dynamically disordered over possible positions down to temperatures considerably lower than the glass transition point T _g . However, water molecules are fixed at particular structural positions in the phase transition range. In PCHS crystals with a nonstoichiometric water content, this circumstance can be responsible for the frustration that leads to the formation of the glassy state.     

Specific heat of the [NH<Subscript>2</Subscript>(CH<Subscript>3</Subscript>)<Subscript>2</Subscript>]<Subscript>2</Subscript>ZnCl<Subscript>4</Subscript> crystal in the temperature region 80–300 K

The specific heat of [NH₂(CH₃)₂]₂ZnCl₄ was measured calorimetrically in the temperature region 80–300 K. As the temperature T decreases, the C _p (T) dependence indicates a phase transition sequence, with the phase transition at T₆=151 K observed for the first time. The thermodynamic characteristics of the crystal were refined. The transformation occurring at T₂=298.3 K is shown to be an incommensurate-commensurate phase transition.     

Anomalous states of the structure of [Rb<Subscript>0.7</Subscript>(NH<Subscript>4</Subscript>)<Subscript>0.3</Subscript>]<Subscript>2</Subscript>SO<Subscript>4</Subscript> crystals in the temperature range 4.2–300 K

Crystals of [Rb_0.7(NH₄)_0.3]₂SO₄ solid solutions are studied using x-ray diffractometry in the temperature range 4.2–300 K. No anomalies are revealed in the temperature dependences of the lattice parameters and the volume of the host unit cell. A series of superstructure reflections observed along the basis axes corresponds to the guest lattice formed in the matrix of the host structure. From analyzing the axial ratio of these structures and their temperature dependences, it is concluded that the structure of the crystal has the form of an incommensurate composite. The guest structure of the composite at room temperature can be considered a set of chains that are not correlated along the b direction. In the plane perpendicular to the chain axes, these chains form a regular framework that is also incommensurate to the host lattice.     

Er,Yb:YAl<Subscript>3</Subscript>(BO<Subscript>3</Subscript>)<Subscript>4</Subscript>—efficient 1.5 μm laser crystal

This article summarizes the latest achievements in the growth and characterization of Er,Yb:YAl₃(BO₃)₄ laser crystal emitting in the 1.5–1.6 μm spectral range. Fundamental spectroscopic parameters relevant to laser performance of Er,Yb:YAB derived from absorption and emission spectra and from excited state dynamics are presented. The laser performance of Er,Yb:YAB in the cw and mode-locked regimes is reported.     

Mn<Subscript>4</Subscript>Si<Subscript>7</Subscript>-Si〈Mn〉-Mn<Subscript>4</Subscript>Si<Subscript>7</Subscript> and Mn<Subscript>4</Subscript>Si<Subscript>7</Subscript>-Si〈Mn〉-<Emphasis Type="Italic">M</Emphasis> photodiodes

The current-voltage characteristics of Mn₄Si₇-Si〈Mn〉-Mn₄Si₇ and Mn₄Si₇-Si〈Mn〉-M photodiodes are studied experimentally. The current passage mechanism under illumination with hν ≥ E _g is considered. The role of a contact to Mn₄Si₇ in the provision of high photosensitivity under illumination of the base by light with hν ≥ 1.14 eV at low temperatures, 77–220 K, is analyzed. From electrical measurements, electron microscopic data for the Mn₄Si₇-Si〈Mn〉 interface, and photocurrent-voltage characteristics, a band diagram under the conditions of photocurrent passage is constructed. The high low-temperature photosensitivity of the diodes (I _ph/I _d ≥ 10⁹) is explained by the impact-ionization-induced modulation of the base conductivity and injection amplification of holes in the transition layer.     

Origin of the structural local transition in the molecular impurity ion MnO<Stack><Subscript>4</Subscript><Superscript>2−</Superscript></Stack> in the K<Subscript>3</Subscript>Na(CrO<Subscript>4</Subscript>)<Subscript>2</Subscript> ferroelastic

A new model is proposed for a local transition in a Jahn-Teller impurity center in a crystal with a ferroelastic (ferroelectric) phase transition. This model is based on direct interaction of the order parameter of the phase transition in the matrix with the Jahn-Teller impurity degrees of freedom. It is shown that, under these conditions, the order parameter field can induce lifting of degeneracy of the electronic states active in the Jahn-Teller effect, which is accompanied by a transition from the Jahn-Teller effect to the pseudo-Jahn-Teller effect with its subsequent suppression. As a result, a decrease in temperature gives rise to a structural local transition in the region of the low-symmetry ferroelastic (ferroelectric) matrix phase from the many-well local adiabatic to a single-well potential. The model proposed allows interpretation of experimental data obtained in an EPR study of the molecular impurity ion MnO ₄ ^2? in the K₃Na(CrO₄)₂ ferroelastic.     

White Light Emitting MZr<Subscript>4</Subscript>(PO<Subscript>4</Subscript>)<Subscript>6</Subscript>:Dy<Superscript>3+</Superscript> (M = Ca,Sr, Ba) Phosphors for WLEDs

A series of MZr₄(PO₄)₆:Dy³⁺ (M = Ca, Sr, Ba) phosphors were prepared by the solid state diffusion method. Confirmation of the phase formation and morphological studies were performed by X-ray powder diffraction (XRD) measurements and scanning electron microscopy, respectively. Photoluminescence (PL) properties of these phosphors were thoroughly analyzed and the characteristic emissions of Dy³⁺ ions were found to arise from them at an excitation wavelength of 351 nm. The PL emission spectra of the three phosphors were analyzed and compared. The CIE chromaticity coordinates assured that the phosphors produced cool white-light emission and hence, they are potential candidates for UV excited white-LEDs (WLEDs).

Open image in new window

Graphical Abstract ?

     

A new composite material Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript>–SnO<Subscript>2</Subscript> for lithium-ion batteries

A new Li₄Ti₅O₁₂–SnO₂ composite anode material for lithium-ion batteries has been prepared by loading SnO₂ on Li₄Ti₅O₁₂ to obtain composite material with improved electrochemical performance relative to Li₄Ti₅O₁₂ and SnO₂. The composite material was characterized by X-ray diffraction and scanning electron microscopy. The results indicated that SnO₂ particles have encapsulated on the surface of the Li₄Ti₅O₁₂ uniformly and tightly. Electrochemical results indicated that the Li₄Ti₅O₁₂–SnO₂ composite material increases the reversible capacity of Li₄Ti₅O₁₂ and has good cycling reliability. At a current rate of 0.5 mA/cm², the material delivered a discharge capacity of 236 mAh/g after 16 cycles. It suggests the existence of synergistic interaction between Li₄Ti₅O₁₂ and SnO₂ and that the capacity of the composite is not a simple weighted sum of the capacities of the individual components. In the composite material, SnO₂ can act as a bridge between the spinel particles to reduce the interparticle resistance and as a good material for the Li intercalation/deintercalation. Thus, electrochemical performance of the Li₄Ti₅O₁₂ spinel can be improved by the surface modification with SnO₂, and the stability of Li₄Ti₅O₁₂ also serves to buffer the internal stress caused by the volume changes in lithium insertion and extraction reactions.     

Spectral-luminescent properties of LiRbLa<Subscript>2 − <Emphasis Type="Italic">x</Emphasis></Subscript>Eu<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>(MoO<Subscript>4</Subscript>)<Subscript>4</Subscript> solid solutions

The luminescent properties of LiRbLa_{2 − x} Eu _x (MoO₄)₄ (x = 0.002, 0.02, 0.1, 0.2, 0.5, 1.0, 1.5, 2.0) solid solutions are investigated under laser excitation {λ_ex = 337.1 nm). It is established that the composition containing 50 at % Eu³⁺ is the brightest of the considered set of phosphors and has the highest quantum yield.     

A PEG-assisted rheological phase reaction synthesis of 5LiFePO<Subscript>4</Subscript>⋅Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>/C as cathode material for lithium ion cells

5LiFePO₄⋅Li₃V₂(PO₄)₃/C composite cathode material is synthesized by a polyethylene glycol (PEG)-assisted rheological phase method. As a surfactant and dispersing agent, PEG can effectively inhabit the aggregation of colloidal particles during the formation of the gel. Meanwhile, PEG will coat on the particles to play the role of carbon source during the sintering. The samples are characterized by X-ray diffraction (XRD), scanning electron microscopy, and electrochemical methods. XRD results indicate that the 5LiFePO₄⋅Li₃V₂(PO₄)₃/C composites are well crystallized and contain olivine-type LiFePO₄ and monoclinic Li₃V₂(PO₄)₃ phases. The composite synthesized at 650 °C exhibits the initial discharge capacities of 134.8 and 129.9 mAh g⁻¹ and the capacity retentions of 96.2 and 97.1 % after 50 cycles at 1C and 2C rates, respectively.     

Internal friction and magnetoelectric response in two-layer composites Tb<Subscript>0.12</Subscript>Dy<Subscript>0.2</Subscript>Fe<Subscript>0.68</Subscript>–PbZr<Subscript>0.53</Subscript>Ti<Subscript>0.47</Subscript>O<Subscript>3</Subscript>

The inverse magnetoelectric effect and internal friction in two-layer composites based on ferromagnetic Tb_0.12Dy_0.2Fe_0.68 and piezoelectric PbZr_0.53Ti_0.47O₃ are studied in an ac electrical field in the frequency range of 52–213 kHz at temperatures of 293 to 400 K. A correlation is found between the internal friction and the efficiency of the inverse magnetoelectric transformation at resonant frequencies.     

μSR study of Eu<Subscript>0.8</Subscript>Ce<Subscript>0.2</Subscript>Mn<Subscript>2</Subscript>O<Subscript>5</Subscript> and EuMn<Subscript>2</Subscript>O<Subscript>5</Subscript> multiferroics

A comparative μSR study of ceramic samples of the EuMn₂O₅ and Eu_0.8Ce_0.2Mn₂O₅ multiferroics is performed in the temperature range from 15 to 300 K. It is found that the Ce doping of the EuMn₂O₅ sample slightly reduces the temperature of the magnetic phase transition from T _N = 45 K for the EuMn₂O₅ sample to T _N = 42.5 K for the Eu_0.8Ce_0.2Mn₂O₅ sample. Below the temperature T _N for both samples, there are two types of localization of a thermalized muon with different temperature dependences of the precession frequency of the magnetic moment of the muon in an internal magnetic field. The higher frequency in both samples refers to the initial antiferromagnetic matrix. The behavior of this frequency in Eu_0.8Ce_0.2Mn₂O₅ follows the Curie–Weiss law with the exponent β = 0.29 ± 0.02, which differs from the value β = 0.39 standard for 3D Heisenberg magnetics and is observed in EuMn₂O₅, because of the strong frustration of the doped sample. The temperature-independent low frequency is due to the presence of Mn³⁺–Mn⁴⁺ ferromagnetic pairs located along the b axis of the antiferromagnetic matrix and in the regions of phase separation, which contain such ion pairs and e _g electrons recharging them. In both samples, polarization losses are the same (about 20%) and are associated with the formation of Mn⁴⁺–Mn⁴⁺ + Mu complexes near Mn³⁺–Mn⁴⁺ ferromagnetic pairs. In the temperature interval from 25 to 45 K, the separation of the Eu_0.8Ce_0.2Mn₂O₅ structure into two fractions where the relaxation rates of polarization of muons differ by an order of magnitude is revealed. This effect is due to a change in the state of regions of phase separation (1D superlattices) at the indicated temperatures. Such effect in EuMn₂O₅ is significantly weaker.