Effect of substituents in phenol and aniline nucleophiles on activation parameters in SNAr reactions

Changes of activation parameters, ΔH^≠ and ΔS^≠, with σ constants of substituents in the phenol and aniline nucleophiles for their S_NAr reactions in various solvents give the δΔH^≠ and δΔS^≠ reaction constants which are linearly related. The dependence obtained, δΔH^≠ versus δΔS^≠, allow estimation of the contribution of changes of the internal enthalpy, δΔH^≠_int, to the enthalpy reaction constant, δΔH^≠, which give a linear dependence on the Hammett reaction constants, ρ. The results obtained show that the substituent effects on the charge development in the transition state (TS) are governed by the magnitude of δΔH^≠_int. Copyright © 2009 John Wiley & Sons, Ltd.     

Effects of substituents on activation parameters in SN2 reactions at aliphatic carbon in solution

Changes of the activation parameters in aliphatic S_N2 reactions with anionic and neutral nucleophiles in various solvents, ΔH^≠ and ΔS^≠, were correlated with σ constants of the substituents. The resultant δΔH^≠ and δΔS^≠ reaction constants are linearly related for variations of substituents at the substrate, leaving group and nucleophile. Correlations of δΔH^≠ versus δΔS^≠ allow the estimation of the contribution of changes of the internal enthalpy, δΔH, to the enthalpy reaction constant, δΔH^≠, which gives a single linear dependence on the Hammett ρ reaction constants. The deviations from the dependence of δΔH versus ρ can be interpreted in terms of changes in the transition state structure in S_N2 reactions. The results obtained show that the substituent effects on the charge development in the transition state are governed by the magnitude of δΔH. Copyright © 2009 John Wiley & Sons, Ltd.     

Reactivity of sodium arenesulfinates in the substitution reaction to γ‐functionalized allyl bromides

The kinetics of nucleophilic bimolecular substitution reactions of γ‐functionalized allyl bromides with non‐substituted and p‐substituted sodium arenesulfinates has been studied. Both the structure of allyl bromides and nucleophilicity of arenesulfinate ions exerted a significant effect on the values of the kinetic parameters such as the second‐order rate constants k, activation energy E_A, and changes in the entropy ΔS^≠, enthalpy ΔH^≠, and free energy ΔG^≠ of the formation of the activated complex from reactants. Based on the evaluation of kinetic parameters, the reactants could be arranged, according to their decreasing reactivity in the S_N2‐reactions as follows: p‐toluenesulfinate ion > benzenesulfinate ion > p‐chlorobenzenesulfinate ion and 4‐bromo‐2‐butenenitrile > 1,3‐ dibromopropene, respectively. Comparison was also made between the kinetic data obtained and some delocalization reactivity indexes for both the substrates and nucleophiles. The enthalpy–entropy compensation effect was observed for the reactions of sodium arenesulfinates with γ‐functionalized allyl bromides. Copyright © 2009 John Wiley & Sons, Ltd.     

Selectivity of nitro versus fluoro substitution in arenes in their reactions with charged O‐ and S‐nucleophiles

The relative mobility of nitro and fluoro substituents in 1,3‐dinitro‐ and 1‐fluoro‐3‐nitrobenzenes, 3,5‐dinitro‐ and 3‐fluoro‐5‐nitrobenzotrifluorides under the action of the nucleophiles (2ArYH)·K₂CO₃ and ArY^?K⁺ in solution and the nucleophiles ArYH·K₂CO₃ (Y = O, S) under heterogeneous conditions was studied by a competitive method in DMF at 40–140 °C. The unique dependences of ΔΔH^≠ on ΔΔS^≠ and ΔΔH^≠ on ΔΔG^≠ were determined for all the substrates and nucleophiles. The dependence of the mechanistic pathway on the nucleophile is discussed. Two results are relevant to the reactions studied: (i) substituent effects in the nucleophiles (2ArYH)·K₂CO₃ and ArYH·K₂CO₃ on the activation entropies suggest that the entropy favours the displacement of nitro group; (ii) the negative signs of ΔΔH^≠ and ΔΔS^≠ for the reactions of the nucleophiles ArY^?K⁺ indicate that the enthalpy determines the displacement of nitro group. It is concluded that the selectivity of the reactions with aryloxide and arylthioxide ions cannot be explained by the hard–soft acid–base principle only. Copyright © 2007 John Wiley & Sons, Ltd.     

Simple method for determining of the isokinetic temperature value for the SNAr reactions in solution

The changes of the free energy of activation δ?G^≠_exp and the activation entropy δ?S^≠ in the framework of the isokinetic relationship δ?G^≠_exp versus (T_iso ? T_exp) δ?S^≠ were explored quantitatively to predict the isokinetic temperature T_iso for the aromatic nucleophilic substitution reactions in solution.     

An experimental investigation of substituent effects on the formation of 2,3‐dihydroquinazolin‐4(1H)‐ones: a kinetic study

The effect of different substituents on the kinetics of the reactions between 2‐amino‐benzamide and some of benzaldehyde derivatives have been spectrally investigated in the presence of formic acid. The proposed mechanism were challenged due to the determination of rate‐determining step (RDS) and also, to obtain the general rate law of the reaction. For all substituents, the reactions followed the second‐order kinetics and the partial orders of reactions were recognized with respect to each reactant. Electron withdrawing substituents on benzaldehyde ring increased the rate of reaction. Kinetic values (k and E_a) and associated activation parameters (ΔH^?, ΔG^? and ΔS^?) of the reactions were determined. Both the Arrhenius and the Eyring equations were used to calculate activation energy. Comparison of magnitude of and T showed that the reactions were enthalpy controlled. Isokinetic plots for the reactions were plotted and linear relationship between and recognized that relative contribution of enthalpy and entropy to the overall free energy was the same in the reactions.     

Multiparameter kinetic analysis of alkaline hydrolysis of a series of aryl diphenylphosphinothioates: models for P=S neurotoxins

Alkaline hydrolysis of a series of X‐substituted‐phenyl diphenylphosphinothioates ( 2a‐i ) in 80 mol%/20 mol% DMSO at 25.0 ± 0.1°C has been studied kinetically and assessed through a multiparameter approach. Substrates 2a to 2i are approximately 12 to 22 times less reactive than their P=O analogues 1a to 1i (ie, the thio effect). The Brønsted‐type plot for the reactions of 2a to 2i is linear with β_lg = ?0.43, consistent with a concerted mechanism. Hammett plots correlated with σ^o and σ^? constants also support a concerted mechanism; the Yukawa‐Tsuno plot results in an excellent linear correlation with ρ_X = 1.26 and r = 0.30, indicating that expulsion of the leaving group occurs in the rate‐determining step (RDS). The ΔH^? value increases from 10.5 to 11.7 and 13.9 kcal/mol as substituent X in the leaving group changes from 3,4‐(NO₂)₂ to 4‐NO₂ and H, in turn, while TΔS^? remains constant at ?6.0 kcal/mol. The strong dependence of ΔH^? on the electronic nature of substituent X also indicates that the leaving group departs in the RDS. The reaction mechanism and origin of the thio effect are discussed by comparison of the current kinetic results with those reported for the reactions of 1a to 1i . The results suggest that for useful OP neurotoxins the mechanism of abiotic hydrolysis is concerted (with varying degrees of asynchronicity) when the substrate bears good leaving groups.     

Substituent effect study on δc values of the bridge group carbons in disubstituted cinnamyl aniline series

The ¹³C nuclear magnetic resonance (NMR) chemical shifts δ_c of bridge group carbons (C‐β, C‐α, and C═N) were measured in this work for a wide set of substituted cinnamyl anilines p‐XC₆H₄CH═CHCH═NC₆H₄Y‐p (X = NO₂, Cl, H, Me, MeO, or NMe₂; Y = NO₂, CN, CO₂Et, Cl, F, H, Me, MeO, or NMe₂) and were used to study the substituent effect. In the study on ¹³C NMR chemical shifts of the titled compounds with single substituent changed, for every bridge carbon δ_c, the effect of cinnamyl substituent X is opposite to that of aniline substituent Y. That is, the action of the same substituent on different aromatic rings is different from the ¹³C NMR chemical shifts, and for C‐β, C‐α, and C═N, the choice of correlation equation depends on the ratio ρ_F(Y)/ρ_R(Y). When the ratio ρ_F(Y)/ρ_R(Y) is close to 1, the chemical shifts of bridge carbons can be well correlated with the single‐parameter equation; otherwise, it is better to adopt the dual‐parameter equation for correlation, and the further the values of ρ_F(Y)/ρ_R(Y) stray from 1, the more suitable the corresponding δ_c values are to be correlated with the dual‐parameter equation. In the study on δ_c of model compounds with simultaneous variations of substituents X and Y, for δ_c(C═N), a multi‐parameter correlation equation is obtained, and the substituent cross‐interaction item Δσ² is suitable to scale the interaction between substituents; however, for δ_c(C‐α and C‐β), the substituent cross‐interaction item Δσ² is perhaps too small to be observed. The multi‐parameter correlation equations can be recommended to predict well the corresponding δ_c values of disubstituted cinnamyl anilines. Copyright © 2012 John Wiley & Sons, Ltd.     

A DFT study of transition structures and reactivity in solvolyses of tert‐butyl chloride,cumyl chlorides,and benzyl chlorides

DFT computations were performed on the S_N1 and S_N2 solvolyses of substituted cumyl chlorides and benzyl chlorides in ethanol and water, by increasing stepwise the C? Cl distance and by optimization. The total energy increases with the increase in the Cl? C distance in S_N1 reactions, while free energy of activation pass through maximum. To validate the results, the calculated free energies of activation were compared with data obtained by kinetic measurements. The structural parameters of the transition states were correlated with the Hammett substituent constants and compared with the data of hydrolyses of tert‐butyl chloride and methyl chloride, which proceed with known mechanisms. Conclusions on the mechanisms of the reactions were driven from the effect of substituents on free energies of activation. Cumyl chlorides substituted with electron‐donating (e‐d) groups solvolyze with S_N1 mechanism, while the reactions of substrates that bear electron‐withdrawing groups proceed with weak nucleophilic assistance of the solvent. Benzyl chlorides hydrolyze through an S_N2 pathway except those derivatives that have strongly e‐d groups, where the reaction has S_N1 character, but a weak nucleophilic assistance of the water should also be taken into consideration. Copyright © 2007 John Wiley & Sons, Ltd.     

Kinetics and related studies of the formation of 2,3‐dihydroquinazolin‐4(1H)‐ones in the presence of different benzaldehyde derivatives

The kinetics and activation parameters for the reaction between 2‐amino‐benzamide and some benzaldehyde derivatives in the presence of formic acid have been reported and discussed. A linear plot of lnk vs l/T showed that the reactions obey the Arrhenius equation. Both the Arrhenius and the Eyring equations were used to calculate the activation energy. The effect of nitro groups was studied on different positions of benzaldehyde. For all substituents, the reactions followed second‐order kinetics, and the partial orders of reactions were recognized with respect to each reactant. Comparisons between the magnitudes of ΔH^? and TΔS^?showed that the reactions were enthalpy controlled. The validity of the isokinetic relationship and the compensation effect was tested, and the isokinetic temperature (β) was obtained. A linear enthalpy‐entropy plot (ΔH^?versusΔS^?) showed that the compensation effect is established, and this process occurs via a same mechanism across a series of reactions. From the Van't Hoff and Exner's plots, the isokinetic temperature was obtained.     

Dynamic 1H NMR investigation along with a theoretical study around the C–C and C = C bonds in a particular phosphorus ylide

In the present work, the dynamic ¹H NMR effects were investigated at variable temperatures within a particular phosphorus ylide involving a 2‐benzoxazolinone around the carbon–carbon single bond and also partial carbon–carbon double bond in two Z‐ and E‐rotational isomers. Activation and kinetic parameters including ΔH^≠, ΔG^≠, ΔS^≠ and E_a were determined in accord with the dynamic ¹H NMR data for three rotational processes. In addition, theoretical studies based upon rotation around the same bonds were investigated using ab initio and DFT methods at the HF/6‐31G(d,p) and B3LYP/6‐31G(d,p) levels of theory. Theoretical activation and kinetic parameters including ΔH^≠, ΔG^≠, ΔS^≠ and E_a were calculated at 298 K and experimental temperatures for five rotational processes. These results (experimental and theoretical), taken together, indicate that the rotational energy barrier around the C = C double bond was considerably high and the observation of the two rotational isomers was impossible (seen as a single isomer) at the high temperatures, in this case rotation around the C = C bond was too fast on the NMR time scale. When the temperature was relatively low, the rate of rotation was sufficiently slow; therefore, observation of the two Z‐ and E‐isomers was possible. In addition, calculations at the HF/6‐31G(d,p) level of theory showed very favorable results in agreement with the experimental data on rotation around the C = C bond. While, B3LYP level using the 6‐31G(d,p) basis set was provided the reasonable data for the restricted rotations around the C–C and C–N single bond. Copyright © 2012 John Wiley & Sons, Ltd.     

4‐Phenyl‐1,2,4‐triazoline‐3,5‐dione in the ene reactions with cyclohexene, 1‐hexene and 2,3‐dimethyl‐2‐butene. The heat of reaction and the influence of temperature and pressure on the reaction rate

The values of the enthalpy (53.3; 51.3; 20.0 kJ mol^?1), entropy (?106; ?122; ?144 J mol^?1K^?1), and volume of activation (?29.1; ?31.0; ?cm³ mol^?1), the reaction volume (?25.0; ?26.6; ?cm³ mol^?1) and reaction enthalpy (?155.9; ?158.2; ?150.2 kJ mol^?1) have been obtained for the first time for the ene reactions of 4‐phenyl‐1,2,4‐triazoline‐3,5‐dione 1 , with cyclohexene 4 , 1‐hexene 6 , and with 2,3‐dimethyl‐2‐butene 8 , respectively. The ratio of the values of the activation volume to the reaction volume (?V^≠_corr/ΔV_{r ? n}) in the ene reactions under study, 1 + 4 → 5 and 1 + 6 → 7 , appeared to be the same, namely 1.16. The large negative values of the entropy and the volume of activation of studied reactions 1 + 4 → 5 and 1 + 6 → 7 better correspond to the cyclic structure of the activated complex at the stage determining the reaction rate. The equilibrium constants of these ene reactions can be estimated as exceeding 10¹⁸ L mol^?1, and these reactions can be considered irreversible. Copyright © 2014 John Wiley & Sons, Ltd.     

金属玻璃形成液体的热力学特性

通过分析规则熔体的热力学模型，计算了典型金属玻璃的熔体混合焓ΔH^mix和混合熵ΔS^mix.结合临界冷却速率，归纳出典型金属玻璃形成液体的热力学特性,并提出基于原子尺寸、元素组成以及元素之间混合焓等参数的形成大块金属玻璃的成分判定方法.结果表明，当ΔH^mix<-15 kJ·mol^-1且ΔS^mix>0.6 J·K^-1mol^-1时，合金易于形成大块金属玻璃.金属玻璃的临界冷却速率R_c具有明显的尺寸效应，其值与熔体的ΔS^mix值呈指数关系，可以用R_c＝42.24×10⁴exp(-13.91ΔS^mix)+19.66粗略判断.运用该方法成功设计并制备出远离原有Zr基大块金属玻璃形成区域(55at%—65at%Zr)的Zr₄₀Al₁₀Ni₁₅Cu₃₅和四元Fe-B基Fe₅₃Co₅Nd₁₂B₃₀大块金属玻璃. 关键词： 混合焓 混合熵 大块金属玻璃 玻璃形成能力     

Ligand‐site exchange in intramolecular complexes of silicon: substituent effects

The intramolecular complexes containing coordination bonds Si←N or Si←O are distinguished for their stereochemical nonrigidity resulting in interconversion between isomers, that is, ligand‐site exchange. The influence of the substituents bound to the silicon atom on the free energies of activation for ligand exchange ΔG^≠ of specific interest is poorly understood. In this work, the literature data on substituent influence on the energies ΔG^≠ for 13 series of the complexes have been considered, using the correlation analysis. On the basis of the obedience of the energies ΔG^≠ to the linear free energy relationship, it has been established for the first time that the ΔG^≠ values depend not only on the inductive and resonance effects but also on the polarizability and steric effects of substituents. The reason for the occurrence of the polarizability effect is the appearance of excess charges on Si and N (or O) atoms as a result of intramolecular coordination consisting in the charge transfer from the donor center (N or O atom) to the acceptor one (Si atom). In some series the contribution of the polarizability or steric effect to the overall change in ΔG^≠ because of the influence of substituents is a maximum. An understanding of these effects may give a better insight into the mechanism of nucleophilic substitution, involving organoelement compounds. Copyright © 2012 John Wiley & Sons, Ltd.     

Nucleophilic substitution reactions promoted by oligoethylene glycols: a mechanistic study of ion‐pair SN2 processes facilitated by Lewis base

We present a mechanistic study for nucleophilic substitution (S_N2) reactions facilitated by multifunctional n‐oligoethylene glycols (n‐oligoEGs) using alkali metal salts MX (M⁺ = Cs⁺, K⁺, X^– = F^–, Br^–, I^–, CN^–) as nucleophilic agents. Density functional theory method is employed to elucidate the underlying mechanism of the S_N2 reaction. We found that the nucleophiles react as ion pairs, whose metal cation is ‘coordinated’ by the oxygen atoms in oligoEGs acting as Lewis base to reduce the unfavorable electrostatic effects of M⁺ on X^–. The two terminal hydroxyl (?OH) function as ‘anchors’ to collect the nucleophile and the substrate in an ideal configuration for the reaction. Calculated barriers of the reactions are in excellent agreement with all experimentally observed trends of S_N2 yields obtained by using various metal cations, nucleophiles and oligoEGs. The reaction barriers are calculated to decrease from triEG to pentaEG, in agreement with the experimentally observed order of efficiency (triEG < tetraEG < pentaEG). The observed relative efficiency of the metal cations Cs⁺ versus K⁺ is also nicely demonstrated (larger [better] barrier [efficiency] for Cs⁺ than for K⁺). We also examine the effects of the nucleophiles (F^–, Br^–, I^–, CN^–), finding that the magnitudes of reaction barriers are F^– > CN^– > Br^– > I^–, elucidating the observation that the yield was lowest for F^–. It is suggested that the role of oxygen atoms in the promoters is equivalent to that of –OH group in bulky alcohols (tert‐butyl or amyl‐alcohol) for S_N2 fluorination reactions previously studied in our lab. Copyright © 2012 John Wiley & Sons, Ltd.     

Prediction of ortho substituent effect in alkaline hydrolysis of substituted phenyl benzoates in aqueous acetonitrile

The second‐order rate constants k (dm³mol^?1s^?1) for alkaline hydrolysis of meta‐, para‐ and ortho‐substituted phenyl esters of benzoic acid, C₆H₅CO₂C₆H₄‐X, in aqueous 50.9% (v/v) acetonitrile have been measured spectrophotometrically at 25 °C. In substituted phenyl benzoates, C₆H₅CO₂C₆H₄‐X, the substituent effects log k_X ? log k_H in aqueous 50.9% acetonitrile at 25 °C for para, meta and ortho derivatives showed good correlations with the Taft and Charton equations, respectively. Using the log k values for various media at 25 °C, the variation of the ortho substituent effect with solvent was found to be precisely described with the following equation: Δlog k_ortho = log k_ortho ? log k_H = 1.57σ_I + 0.93σ°_R + 1.08E_s^B ? 0.030ΔEσ_I ? 0.069ΔEσ°_R, where ΔE is the solvent electrophilicity, ΔE = E_S ? E_H20, characterizing the hydrogen‐bond donating power of the solvent. We found that the experimental log k values for ortho‐, para‐ and meta‐substituted phenyl benzoates in aqueous 50.9% acetonitrile at 25 °C, determined in the present work, precisely coincided with the log k values predicted with the equation (log k^X)_calc = (log k^H_AN)_exp + (Δlog k^X)_calc where the substituent effect (Δlog k^X)_calc was calculated from equation describing the variation of the substituent effect with the solvent electrophilicity parameter, using for aqueous 50.9% CH₃CN the solvent electrophilicity parameter, ΔE = ?5.84. In going from water to aqueous 50.9% CH₃CN, the ortho inductive term grows twice less as compared with the para polar effect. Copyright © 2013 John Wiley & Sons, Ltd.     

Fluorescence Spectrometric Studies on the Binding of an Amino-Functionalized Ionic Liquid to Cytochrome c

The interaction of an amino-functionalized ionic liquid, 1-(2-aminoethyl)-3-butylimidazolium bromide ([NH₂C₂C₄im]Br), with cytochrome c (cyt c) at pH 7.4 was investigated using fluorescence and UV-Vis absorption spectroscopic techniques. From the experimental results, it is found that cyt c has a strong ability to quench the intrinsic fluorescence of [NH₂C₂C₄im]Br and the quenching mechanism is considered as a static quenching process. The binding constants and the number of binding sites (n) were calculated at different temperatures. The thermodynamic parameters such as free energy change (ΔG), enthalpy change (ΔH), and entropy change (ΔS) were calculated by thermodynamic equations. According to the results, the values of ΔG, ΔH, and ΔS are all negative, suggesting that interaction between [NH₂C₂C₄im]Br and cyt c is spontaneous and mainly driven by hydrogen bonding and van der Waals forces.     

Photochromism of dihydroindolizines Part XIX. Efficient one‐pot solid‐state synthesis,kinetic, and computational studies based on dihydroindolizine photochromes

For the first time, one‐pot solid‐state synthesis of 12 photochromic materials based on photochromic dihydroindolizine system substituted in both fluorene part (region A) and the heterocyclic part (region C) has been established. This method has immense advantages, which are short‐time reaction, high‐yield and low‐yield by‐products, and easily purification and separation processes. In addition, this method will help in getting over the tremendously purification and low‐yield problems faced since the worth‐finding of this family of photochromic materials. The absorption maxima (λ_max) and the half‐lives (t_1/2) of the colored betaines were detected in all cases using multichannel UV/Vis spectrophotometric measurements. The rate constants of the thermal back reaction of the betaines were determined at constant temperature by measuring the decrease in the maximum absorption intensity (λ_max) with time. The half‐lives (t_1/2) and rate constants (k) of betaines under examination were calculated by plotting lnA against time (t). The kinetic measurements could be detected by both spectra scan and time‐dependent decay measurements. Examination of the Arrhenius parameters reveals an underlying compensation between E_a and log A, whereby an increase in E_a is opposed by an increase in log A. The compensation appears in the corresponding Eyring parameters, ΔH^≠ and ΔS^≠; betaine structural changes that lead to lower, more favorable enthalpies of activation engender opposing entropic changes. At the isokinetic temperature T_iso = β, structural changes do not affect the rate constant of a reaction series because the changes of ΔH^≠ are counterbalanced by changes of ΔS^≠. The existence of an isokinetic relationship indicates a common structure of the transition state of all thermal back reaction of betaine under investigation. The computational results suggest that the decoloration reaction is a two‐step mechanism. The first step corresponds to the transoid–cisoid isomerization with an activation barrier of 10.3 kJ mol^?1, and the second step is the ring closure from the cisoid intermediate with a barrier 71.3 kJ mol^?1, which represent the rate determining step for thermal decoloration. The photochemical ring opening of DHIs to betaines is a disrotatory 1,5‐electrocyclic reaction, whereas the thermal ring‐closing occurs in the conrotatory mode. Copyright © 2016 John Wiley & Sons, Ltd.     

Remote substituent effects on gas‐phase homolytic Fe–O and Fe–S bond energies of p‐G‐C6H4OFe(CO)2(η5‐C5H5) and p‐G‐C6H4SFe(CO)2(η5‐C5H5) studied using Hartree–Fock and density functional theory methods

Metal–ligand bond enthalpy data can afford invaluable insights into important reaction patterns in organometallic chemistry and catalysis. In this paper, the Fe–O and Fe–S homolytic bond dissociation energies [ΔH_homo(Fe–O)'s and ΔH_homo(Fe–S)'s] of two series of para‐substituted phenoxydicarbonyl(η⁵‐cyclopentadienyl) iron [p‐G‐C₆H₄OFp ( 1 )] and (para‐substituted benzenethiolato)dicarbonyl(η⁵‐cyclopentadienyl) iron [p‐G‐C₆H₄SFp ( 2 )] were studied using Hartree–Fock and density functional theory (DFT) methods with large basis sets. In this study, Fp is (η⁵‐C₅H₅)Fe(CO)₂, and G are NO₂, CN, COMe, CO₂Me, CF₃, Br, Cl, F, H, Me, MeO, and NMe₂. The results show that DFT methods can provide the best price/performance ratio and accurate predictions of ΔH_homo(Fe–O)'s and ΔH_homo(Fe–S)'s. The remote substituent effects on ΔH_homo(Fe–O)'s and ΔH_homo(Fe–S)'s [ΔΔH_homo(Fe–O)'s and ΔΔH_homo(Fe–S)'s] can also be satisfactorily predicted. The good correlations [r = 0.98 (g, 1), 0.98 (g, 2)] of ΔΔH_homo(Fe–O)'s and ΔΔH_homo(Fe–S)'s in series 1 and 2 with the substituent σ_p⁺ constants imply that the para‐substituent effects on ΔH_homo(Fe–O)'s and ΔH_homo(Fe–S)'s originate mainly from polar effects, but those on radical stability originate from both spin delocalization and polar effects. ΔΔH_homo(Fe–O)'s ( 1 ) and ΔΔH_homo(Fe–S)'s ( 2 ) conform to the captodative principle. Insight from this work may help the design of more effective catalytic processes. Copyright © 2013 John Wiley & Sons, Ltd.     

Thermodynamics of self-assembly of sodium octanoate: comparison with a fully fluorinated counterpart

The isotherms of conductivity of sodium octanoate were measured and the critical micelle concentration (cmc) and degree of ionization of the micelles, β, determined in a range of temperatures (273–343 K) above the Krafft point. The thermodynamic parameters, Gibbs free energy ΔG _m ⁰, enthalpy ΔH _m ⁰, and entropy ΔS _m ⁰ of micelle formation, were determined from polynomial adjustments of the temperature dependence of cmc and from a proposed thermodynamic model based on the works of Muller [1993, Langmuir, 9, 96] and Rodríguez et al. [2002, J. Colloid Interface Sci., 250, 438]. The increase in heat capacity upon micellization, ΔC _pm ⁰, was estimated from the parameters of the model and the enthalpy—entropy compensation phenomena discussed. Finally, for information on their structural differences, hence to understand their different behaviours, thermodynamic parameters are discussed, comparing the corresponding fluorocarbon compound. A remarkable shift in minimum temperature in the U-shaped curve of cmc versus temperature was found when hydrogen was substituted by fluorine in the hydrophobic chain of the surfactant. This behaviour is a consequence of the special characteristics of the fluorine substituent in the hydrophobic tail and was reflected in the thermodynamic parameters and in the enthalpy—entropy compensation parameters, presenting different intercepts at the same compensation temperature.