Propagation behavior of two transverse surface waves in a three-layer piezoelectric/piezomagnetic structure

Propagation of transverse surface waves in a three-layer system consisting of a piezoelectric/piezomagnetic (PE/PM) bi-layer bonded on an elastic half-space is theoretically investigated in this paper. Dispersion relations and mode shapes for transverse surface waves are obtained in closed form under electrically open and shorted boundary conditions at the upper surface. Two transverse surface waves related both to Love-type wave and Bleustein–Gulyaev (B–G) type wave propagating in corresponding three-layer structure are discussed through numerically solving the derived dispersion equation. The results show that Love-type wave possesses the property of multiple modes, it can exist all of the values of wavenumber for every selected thickness ratios regardless of the electrical boundary conditions. The presence of PM interlayer makes the phase velocity of Love-type wave decrease. There exist two modes allowing the propagation of B–G type wave under electrically shorted circuit, while only one mode appears in the case of electrically open circuit. The modes of B–G type wave are combinations of partly normal dispersion and partly anomalous dispersion whether the electrically open or shorted. The existence range of mode for electrically open case is greatly related to the thickness ratios, with the thickness of PM interlayer increasing the wavenumber range for existence of B–G type wave quickly shortened. When the thickness ratio is large enough, the wavenumber range of the second mode for electrically shorted circuit is extremely narrow which can be used to remove as an undesired mode. The propagation behaviors and mode shapes of transverse surface waves can be regulated by the modification of the thickness of PM interlayer. The obtained results provide a theoretical prediction and basis for applications of PE–PM composites and acoustic wave devices.     

Transverse surface waves in a layered structure with a functionally graded piezoelectric substrate and a hard dielectric layer

As to an ideally layered structure with a functionally graded piezoelectric substrate (material parameters change continuously along the thickness direction) and a hard dielectric layer, the existence and propagation behavior of transverse surface waves is studied by analytical technique. The dispersion equations for the existence of the transverse surface waves with respect to phase velocity are obtained for electrically open and short circuit conditions, respectively. A detailed investigation of the effect of gradient coefficient on dispersion relation, electromechanical coupling factor and penetration depth is carried out. It is found by numerical examples that adjusting gradient coefficient makes the electromechanical coupling factor of the transverse surface waves achieve quite high values at some appropriate ratio values of the layer thickness to the wavelength, and at the same time, the penetration depth can be reduced to the same order as the wavelength.     

Theoretical validation on the existence of two transverse surface waves in piezoelectric/elastic layered structures

In this paper, we analytically study the dispersion behavior of transverse surface waves in a piezoelectric coupled solid consisting of a transversely isotropic piezoelectric ceramic layer and an isotropic metal or dielectric substrate. This study is a revisit to the stiffened Love wave propagation done previously. Closed-form dispersion equations are obtained in a very simple mathematical form for both electrically open and shorted cases. From the viewpoint of physical situation, two transverse surface waves (i.e., the stiffened Love wave and the FDLW-type wave) are separately found in a PZT-4/steel system and a PZT-4/zinc system. All the observed dispersion curves are theoretically validated through the discussion on the limit values of phase velocity using the obtained dispersion equations. Those validation and discussion give rise to a deeper understanding on the existence of transverse surface waves in such piezoelectric coupled structures. The results can be used as a benchmark for the study of the wave propagation in the piezoelectric coupled structures and are significant in the design of wave propagation in the piezoelectric coupled structures as well.     

Tetrahedral amorphous carbon films as a frequency-increasing interlayer of surface acoustic wave devices with a ZnO/Si configuration

Tetrahedral amorphous carbon (ta-C) films deposited using filtered cathodic vacuum arc technology have been applied to the interlayer of surface acoustic wave devices with a ZnO/Si configuration. The phase velocity in the multilayered structure was analyzed in the first instance by theoretical calculations and was then measured by means of a network analyzer. It has been shown that the ta-C interlayer between piezoelectric film and Si substrate can strikingly increase the phase velocity of the surface acoustic wave. The greater the interlayer thickness is and the higher the content of the sp³ hybridization is, the faster surface acoustic wave propagates. However, the increment of phase velocity gradually decreases with increasing interlayer thickness. It was confirmed in this paper that the measured values of the phase velocity as a function of the interlayer thickness agree with the theoretical calculations.     

Incredible negative values of effective electromechanical coupling coefficient for surface acoustic waves in piezoelectrics

The extraordinary case of increase in velocity of surface acoustic waves (SAW) caused by electrical shorting of the surface of the superstrong piezoelectric crystal potassium niobate, KNbO3, is numerically found. The explanation of this effect is based on considering SAWs as coupled Rayleigh and Bleustein-Gulyaev modes. A general procedure of approximate decoupling of the modes is suggested for piezoelectric crystals of arbitrary anisotropy. The effect under study takes place when the phase velocity of uncoupled sagittally polarized Rayleigh waves is intermediate between the phase velocities of uncoupled shear-horizontal Bleustein Gulyaev waves at the free and metallized surfaces. In this case, the metallization of the surface by an infinitely thin layer may cause a crossover of the velocity curves of the uncoupled waves. The presence of the mode coupling results in splitting of the curves with transition from one uncoupled branch to the other. This transition is responsible for the increase in SAW velocity, which appears to be greater than its common decrease produced by electrical shorting of the substrate surface.     

Polarization of elastic waves in tellurium single crystal

We study special cases of elastic bulk wave propagation in a crystal of tellurium, in which the phase velocity of shear waves can exceed those of longitudinal waves. The impact of the piezoelectric effect on the phase velocity and polarization of waves is discussed.     

流体/准饱和多孔介质中伪Scholte波的传播特性

研究流体/多孔介质界面Scholte波的传播特性对于水下勘探、地震工程等领域具有重要意义.本文基于Biot理论和等效流体模型,采用势函数方法,推导了描述有限厚度流体/准饱和多孔半空间远场界面波的特征方程和位移、孔压计算公式.在此基础上,分别以砂岩和松散沉积土为例,研究了流体/硬多孔介质和流体/软多孔介质两种情况下,可压缩流体层厚度和多孔介质饱和度对伪Scholte波传播特性的影响.结果表明：多孔介质软硬程度显著影响界面波的种类、相速度、位移和水压力分布;有限厚度流体/饱和多孔半空间界面处伪Scholte波相速度与界面波波长和流体厚度的比值有关;孔隙水中溶解的少量气体对剪切波的相速度的影响不大,对压缩波相速度、伪Scholte波相速度和孔隙水压力分布影响显著.     

Conventional electromagnetic acoustic transducer development for optimum Lamb wave modes

Lamb waves are normally utilized for inspecting thin metal sheets. Wheel type probes using piezoelectric oscillators have generally been used as the sensors for Lamb waves. Recently, the electromagnetic acoustic transducer (EMAT) has been developed and is beginning to be used as a Lamb wave detector. We have developed a useful type of transducer for Lamb waves. The new EMAT consists of a meander coil with a narrow distance of 2.5 mm and has a symmetrical structure in the vertical direction for both surface sides. The new EMAT can generate Lamb waves with variable wavelengths corresponding to the frequency range from approximately 300 kHz to 2.5 MHz and multiple modes, and can also generate selected symmetrical and anti-symmetrical mode Lamb waves. It is demonstrated that the optimum Lamb wave mode could be produced by the appropriate positioning of the EMATs and controlling the phase (same or inversed) of the electrical signal driving the device. The described EMAT can be used to examine steel (or other material) sheets of different thickness. It is also shown that the S0 (0.3 MHz) mode Lamb wave is the most effective for the deepest (up to 6 mm) penetration.     

A numerical investigation of the acoustic mode waves in a deviated borehole penetrating a transversely isotropic formation

A 2.5-dimensional method in frequency wave-number domain is developed to investigate the mode waves in a deviated borehole penetrating a transversely isotropic formation. The phase velocity dispersion characteristics of the fast and slow flexural mode waves excited by a dipole source are computed accurately at various deviation angles for both hard and soft formations. The sensitivities of the flexural mode waves to all elastic constants in a transversely isotropic formation are calculated. Numerical results show that, for a soft formation, the fast flexural mode wave is dominated by c66 at high deviation angles and low frequencies, while the slow flexural mode wave is dominated by c44 at the same conditions. Waveforms in time domain are also presented to support the conclusions.     

Employment of a novel ultrasonic method to investigate high pressure phase transitions in oleic acid

In this work, the variation of sound velocity with hydrostatic pressure for oleic acid is evaluated up to 350 MPa. During the measurement, we identified the phase transformation of oleic acid and the presence of the hysteresis of the dependence of sound velocity on pressure. From the performed measurements, it can be seen that the dependence of sound velocity on pressure can be used to investigate phase transformations in natural oils. Ultrasonic waves were excited and detected using piezoelectric LiNbO₃(Y-36 cut) 5 MHz transducers. The phase velocity of the longitudinal ultrasonic waves was measured using a cross-correlation method to evaluate the time of flight.     

Love waves in a layered functionally graded piezoelectric structure under initial stress

Abstract

To study the effect of initial stress on the propagation behavior of Love waves in a layered functionally graded piezoelectric structure, a mathematical model is established. The piezoelectric layer is taken as exponentially graded material where as half-space is taken as simply elastic substratum. The coupled electromechanical field equations are solved analytically to obtain the mechanical displacements and electrical potential functions for the piezoelectric layer and elastic substrate. The dispersion relations are obtained for electrically open and short cases. The higher mode Love wave propagation has been considered. For numerical interpretation of the results, four sets of piezoelectric layer and elastic substrate have been taken into consideration. Graphical representation reveals about the effect of initial stress and the effect of inhomogeneity parameter on the phase velocity against wave number for electrically open and electrically short cases, respectively.     

Love-type waves in functionally graded piezoelectric material (FGPM) sandwiched between initially stressed layer and elastic substrate

This paper investigates the propagation behavior of Love-type surface waves in three-layered composite structure with initial stress. The composite structure has been taken in such a way that a functionally graded piezoelectric material (FGPM) layer is bonded between initially stressed piezoelectric upper layer and an elastic substrate. Using the method of separation of variables, frequency equation for the considered wave has been established in the form of determinant for electrical open and short cases on free surface. The bisection method iteration technique has been used to find the roots of the dispersion relations which give the modes for electrical open and short cases. The effects of gradient variation of material constant and initial stress on the phase velocity of surface waves are discussed. Dependence of thickness on each parameter of the study has been shown explicitly. Study has been also done to show the existence of cut-off frequency. Graphical representation has been done to exhibit the findings. The obtained results are significant for the investigation and characterization of Love-type waves in FGPM-layered media.     

Love wave propagation in piezoelectric layered structure with dissipation

We investigate analytically the effect of the viscous dissipation of piezoelectric material on the dispersive and attenuated characteristics of Love wave propagation in a layered structure, which involves a thin piezoelectric layer bonded perfectly to an unbounded elastic substrate. The effects of the viscous coefficient on the phase velocity of Love waves and attenuation are presented and discussed in detail. The analytical method and the results can be useful for the design of the resonators and sensors.     

The anisotropy of the basic characteristics of Lamb waves in a (001)-Bi<Subscript>12</Subscript>SiO<Subscript>20</Subscript> piezoelectric crystal

The orientation dependences of the phase velocity, the effective electromechanical coupling coefficient, and the angle between the wave normal and the energy flux vector are numerically calculated for zeroand first-order Lamb waves propagating in the (001) basal plane of a Bi₁₂SiO₂₀ cubic piezoelectric crystal. It is shown that the anisotropies of these modes are different and depend on the plate thickness h and the wavelength λ. For h/λ < 1, the mode anisotropy can exceed the anisotropy of the corresponding characteristics of surface acoustic waves propagating in the same plane; for h/λ > 1, it approximately coincides with the SAW anisotropy for all the characteristics.     

Love waves in layered flexoelectric structures

Abstract

In this paper, the flexoelectric effect on Love waves propagating in a structure with a nanoscale piezoelectric guiding layer deposited on an isotropic elastic substrate is analytically investigated. Transcendental complex dispersion equations are obtained and solved numerically which are corresponding to the electrically open and short conditions at the free surface. A detailed discussion about the dispersion relations of the fundamental mode is subsequently presented. The results indicate that flexoelectricity has a substantial effect on Love wave propagation. The presence of flexoelectricity leads to a complex phase velocity with a negative/positive imaginary part, which means Love waves attenuate/grow over time. In addition, the phase velocity dispersion relations depend greatly on the thickness and flexoelectric coefficients of the guiding layer. The current work is the first attempt to explore the flexoelectric effect on the propagation characteristics of surface acoustic waves (SAWs). And the results would be beneficial to achieve a better performance of SAW devices.     

Steady vortices in plasmas and geophysical flows

A number of two-dimensional fluid models in geophysical fluid dynamics and plasma physics are examined to find out whether they have steady and localized monopole vortex solutions. A simple and general method that consists of two steps is used. First the dispersion relation is calculated, to find all possible values of the phase velocity of the linear waves. Then an integral relation that determines the center-of-mass velocity of localized structures must be found. The existence condition is that this velocity should be outside the region of linear phase velocities. After a presentation of the method, previous work on the plasma drift wave model and the shallow-water equations is reviewed. In both cases it is found that the center-of-mass velocity is larger than the maximum phase velocity of the linear waves if the amplitude is large enough, and steady localized vortices can therefore exist. New results are then obtained for a number of two-field models. For the coupled ion acoustic-drift modes in plasmas, it is found that the center-of-mass velocity depends on the ratio between the parallel ion velocity component and the electrostatic potential in the vortex. If this ratio is large enough, the vortex can be steady. For the drift-Alfven mode the "center-of-charge" velocity is proportional to the ratio between the parallel current and the total charge in the vortex. It can therefore be steady if this ratio satisfies the appropriate conditions. For the quasigeostrophic two-layer equations, describing stratified flow on a rotating planet, it is found that the center-of-mass velocity is determined by the ratio between the baroclinic and the barotropic components in the vortex. If a baroclinic component with an appropriate sign is added to a barotropic vortex, it propagates faster than the barotropic Rossby waves, and can be steady. Finally, the existence conditions for a vortex in an external zonal flow are examined. It is found that the center-of-mass velocity acquires an additional westward contribution in an anticyclonic shear zone in the framework of the shallow-water equations, and also that an easterly jet south of this shear zone partly shields a vortex situated in the shear zone from the dispersive influence of the fast Rossby waves on the equatorward side.     

Love wave propagation in functionally graded piezoelectric material layer

An exact approach is used to investigate Love waves in functionally graded piezoelectric material (FGPM) layer bonded to a semi-infinite homogeneous solid. The piezoelectric material is polarized in z-axis direction and the material properties change gradually with the thickness of the layer. We here assume that all material properties of the piezoelectric layer have the same exponential function distribution along the x-axis direction. The analytical solutions of dispersion relations are obtained for electrically open or short circuit conditions. The effects of the gradient variation of material constants on the phase velocity, the group velocity, and the coupled electromechanical factor are discussed in detail. The displacement, electric potential, and stress distributions along thickness of the graded layer are calculated and plotted. Numerical examples indicate that appropriate gradient distributing of the material properties make Love waves to propagate along the surface of the piezoelectric layer, or a bigger electromechanical coupling factor can be obtained, which is in favor of acquiring a better performance in surface acoustic wave (SAW) devices.     

Subsonic leaky Rayleigh waves at liquid-solid interfaces

The paper is devoted to the study of leaky Rayleigh waves at liquid-solid interfaces close to the border of the existence domain of these modes. The real and complex roots of the secular equation are computed for interface waves at the boundary between water and a binary isotropic alloy of gold and silver with continuously variable composition. The change of composition of the alloy allows one to cross a critical velocity for the existence of leaky waves. It is shown that, contrary to popular opinion, the critical velocity does not coincide with the phase velocity of bulk waves in liquid. The true threshold velocity is found to be smaller, the correction being of about 1.45%. Attention is also drawn to the fact that using the real part of the complex phase velocity as a velocity of leaky waves gives only approximate value. The most interesting feature of the waves under consideration is the presence of energy leakage in the subsonic range of the phase velocities where, at first glance, any radiation by harmonic waves is not permitted. A simple physical explanation of this radiation with due regard for inhomogeneity of radiated and radiating waves is given. The controversial question of the existence of leaky Rayleigh waves at a water/ice interface is reexamined. It is shown that the solution considered previously as a leaky wave is in fact the solution of the bulk-wave-reflection problem for inhomogeneous waves.     

Bleustein-Gulyaev waves in a functionally graded piezoelectric material layered structure

This work presents a theoretical study of the propagation behavior of Bleustein-Gulyaev waves in a layered structure consisting of a functionally graded piezoelectric material (FGPM) layer and a transversely isotropic piezoelectric substrate. The influence of the graded variation of FGPM coefficients on the dispersion relations of Bleustein-Gulyaev waves in the layered structure is investigated. It is demonstrated that, for a certain frequency range of Bleustein-Gulyaev waves, the mechanical perturbations of the particles are restricted in the FPGM layer and the phase velocity is independent of the electrical boundary conditions at the free surface. Results presented in this study can not only provide further insight on the electromechanical coupling behavior of surface waves in FGPM layered structures, but also lend a theoretical basis for the design of high-performance surface acoustic wave (SAW) devices. Supported by the National Natural Science Foundation of China (Grant No. 10632060), the National Basic Research Program of China (Grant No. 2006CB601202), the National 111 Project of China (Grant No. B06024), and the Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20070698064)     

The effect of initial stress on the propagation behavior of SH waves in piezoelectric coupled plates

This study analytically investigates the propagation of shear waves (SH waves) in a coupled plate consisting of a piezoelectric layer and an elastic layer with initial stress. The piezoelectric material is polarized in z-axis direction and perfectly bonded to an elastic layer. The mechanical displacement and electrical potential function are derived for the piezoelectric coupled plates by solving the electromechanical field equations. The effects of the thickness ratio and the initial stress on the dispersion relations and the phase and group velocities are obtained for electrically open and mechanically free situations. The numerical examples are provided to illustrate graphically the variations of the phase and group velocities versus the wave number for the different layers comparatively. It is seen that the phase velocity of SH waves decreases with the increase of the magnitude of the initial compression stress, while it increases with the increase of the magnitude of the initial tensile stress. The initial stress has a great effect on the propagation of SH waves with the decrease of the thickness ratio. This research is theoretically useful for the design of surface acoustic wave (SAW) devices with high performance.