Self-organization of five species in a cyclic competition game

Cyclic competition game models, particularly the “rock–paper–scissors” model, play important roles in exploring the problem of multi-species coexistence in spatially ecological systems. We propose an extended “rock–paper–scissors” game to model cyclic interactions among five species, and find that two of the five can coexistent when biodiversity disappears, which is different from the “rock–paper–scissors” game. As the number of fingers is five, we named the new model the “fingers” game, where the thumb, forefinger, middle finger, ring finger, and little finger cyclically dominate their subsequent species and are dominated by their former species. We investigate the “fingers” model in two ways: direct simulations and nonlinear partial differential equations. An important finding is that the number of species in a cyclic competition game has an influence on the emergence of biodiversity. To be specific, the “rock–paper–scissors” model is in favor of maintaining biodiversity in comparison with the “fingers” model when the variables (population size, reproduction rate, selection rate, and migration rate) are the same. It is also shown that the mobility and reproduction rate can promote or jeopardize biodiversity.     

Experimental study on downstep in Chinese intonation

Downstep in pitch contour of Chinese Putonghua is examined using subtly designed sentences by controlling tone combinations. The results show both automatic and nonautomatic downstep phenomena exist in Chinese. In non-automatic downstep, low tones compress downwards the pitch range of the following syllables. and the main influence of downstep is on topline. Low tone not only lower the topline behind it, but also raise the high tones before it, the effects are compatible with each other. In automatic downstep, the topline of pitch contour in intonational phrase is presented as a linear downtrend, but it differs among speakers due to the effect of personal stress practice. In comparison with downstep phenomenon in other tone or non-tone languages, the downstep ratio in Chinese is not constant, and the domain of downstep is not limited within the adjacent tones.     

Contrastive analysis on tone between Putonghua and Taiwan Mandarin

The differences of the pitch and duration of Chinese syllables between Putonghua （PTH） and Taiwan Mandarin （TM） were studied. The speech materials to be used are not only isolated syllables, but also sentences. The results reveal that： For the isolated syllables, T1 and T2 in TM are influenced by Minnan dialect, therefore their pitch are lower than those in PTH. T3 is fall-rise in PTH, while it is fall in TM. Moreover, the syllable duration sequence for different tone is T3〉T2〉T1〉T4 in PTH, while it is T1〉T2〉T3〉T4 in TM. For the syllables in sentences, T2 is mid-rise in PTH, while it is mid-level in TM. And the T3 is longer than T4 but shorter than T1 or T2 in PTH, while it is the shortest in TM. Furthermore the effects of prosodic phrase boundary on duration for different tones are almost the same in PTH, but the lengthening part of T1 or T2 is longer than that of T3 or T4 in TM.     

Abelian-Higgs phase of SU(2) QCD and glueball energy

It is shown that SU(2) QCD admits an dual Abelian-Higgs phase, with a Higgs vacuum of a type-Ⅱ superconductor. This is done by using a connection decomposition for the gluon field and the random-direction approximation. Using a bag picture with soft wall, we presented a calculational procedure for the glueball energy based on the recent proof for wall-vortices [Nucl. Phys. B 741(2006)1].     

Signal generation in an isotropic medium in scanning electron acoustic microscope

Based on the research in Ref. [5][Materials Science and Engineering, 1989; A122： 57 63], an improved model of heat source is set up, the different modes of Lamb wave in an isotropic sample generated by a chopped electron beam at frequency f are obtained with integral transform and normal function expansion method, and the output signal of PZT coupled at the back surface of the sample is found out. The generation mechanism of SEAM （Scanning Electron Acoustic Microscopy） signal is discussed. It shows that the SEAM is a near field imaging technique with high spatial resolution and its best lateral spatial resolution is about 2√2α （α is the radius of the focused electron beam）. Some of experimental results of SEAM images are presented in the paper and it shows that the spatial resolution of SEAM is better than 0.5 μm and smaller than the thermal diffusion length of the sample. Therefore the character of near field imaging in SEAM is also proved experimentally.     

High efficiency filtering using two-dimensional photonic crystal coupled cavity structures

Transmission spectra of coupled cavity structures (CCSs) in two-dimensional (2D) photonic crystals (PCs) are investigated using a coupled mode theory, and an optical filter based on CCS is proposed. The performance of the filter is investigated using finite-difference time-domain (FDTD) method, and the results show that within a very short coupling distance of about 3λ, where λ is the wavelength of signal in vacuum, the incident signals with different frequencies are separated into different channels with a contrast ratio of 20 dB. The advantages of this kind of filter are small size and easily tunable operation frequencies.     

Real-time restoration of rotational blurred image using gradient-loading

The key to the restoration of rotational motion blurred image is how to restore the image under a low cost and to correct the irreversibility of the degradation function matrix.Based on the special qualities of degradation function matrix and precise deduction in space-domain, we present a new approach using gradient-loading for restoration of rotational blurred image.By easily adding a gradient operator, the irreversibility of the original matrix is corrected and can be applied for inverse filtering then.Gradientloading is the optimized approach which combines the advantages of both the approaches using constrained least square filtering and traditional diagonal-loading.Compared with the approach using least square filtering, its peak signal-to-noise ratio (PSNR) is improved from 3.18 to 6.46dB, while the computing time is reduced to 1/2-1/3.Experimental results demonstrate the effectiveness, noise-resistibility, robustness, and low complexity of this approach, which make it more suitable for real-time environment.     

All-Optical Logic Device Using Bent Nonlinear Tapered Y-Junction Waveguide Structure

We propose an all-optical logic device made of a bent tapered Y-junction waveguide with a Kerr-type nonlinear interface. It could provide an AND gate, OR gate, and exclusive-OR (XOR) gate. We could obtain different transmission results by adjusting the bending angle. The numerical simulation results show that the device functions as AND, OR, and XOR gates.     

Real-time, continuous-wave terahertz imaging by a pyroelectric camera

Real-time, continuous-wave terahertz (THz) imaging is demonstrated. A 1.89-THz optically-pumped farinfrared laser is used as the illumination source, and a 124 × 124 element room-temperature pyroelectric camera is adopted as the detector. With this setup, THz images through various wrapping materials are shown. The results show that this imaging system has the potential applications in real-time mail and security inspection.     

Design of chirped Mo/Si multilayer mirror in the extreme ultraviolet region

The chirped Mo/Si multilayer mirror in the extreme ultraviolet region is designed to obtain sub-femtosecond pulses from high-order harmonics. Numerical simulations of temporal profile of the pulses are made for superposition of incident high-order harmonics and that of reflected ones by the chirped multilayer mirror.The normal incidence reflectivity and chirp in the wavelength range of 12.5 - 16.5 nm are 6.7% ±0.5%and-3617±171 as2, respectively. Simulation results indicate that the designed chirped multilayer mirror can be used for producing 104-as pulses.     

Researches on the measurement of distribution image of radiated noise using focused beamforming

A method using focused beamforming to measure the distribution image （underwater image） of submarine and surface ship＇s noise sources is presented. Level linear array can measure the target image on water level, but the multi-path interference of underwater acoustic channel may affect the quality of it. Virtual time reversal mirror and virtual array can both solve the problem very well; they make the image with high resolution.     

Simulation and experimental research on polymer fiber mode selection polished coupler

Multimode dispersion is the main obstacle for high bandwidth in multimode optical fiber （MMF） communication system. Mode selection is an effective method to oppress multimode dispersion. We propose and investigate a kind of polymer optical fiber polished coupler. Beam propagation method （BPM） is employed to calculate the coupling coefficient of transmission modes in MMF coupler, and an output pattern from coupling branch is obtained. Analysis and experiment show that this coupler can select certain modes by changing polished depth, contact area, and intersection angle of two branches, which means that the device can be employed both as a mode selector and a sensor. In addition, simulation shows that five times bandwidth enhancement may be realized by selecting modes with the polymer fiber polished coupler.     

Influence of substrate process tolerances on transmission characteristics of frequency-selective surface

Frequency-selective surface （FSS） is a two-dimensional periodic structure consisting of a dielectric substrate and the metal units （or apertures） arranged periodically on it. When manufacturing the substrate, its thickness and dielectric constant suffer process tolerances. This may induce the center frequency of the FSS to shift, and consequently influence its characteristics. In this paper, a bandpass FSS structure is designed. The units are the Jerusalem crosses arranged squarely. The mode-matching technique is used for simulation. The influence of the tolerances of the substrate＇s thickness and dielectric constant on the center frequency is analyzed. Results show that the tolerances of thickness and dielectric constant have different influences on the center frequency of the FSS. It is necessary to ensure the process tolerance of the dielectric constant in the design and manufacturing of the substrate in order to stabilize the center frequency.     

Influence of dielectric microcavity on the spontaneous emission rate of atom: a perspective on the closed-orbit theory of photons

The formulas of the quantum electrodynamics have been applied to calculate the spontaneous emission rate of excited atom in dielectric microcavity.The results exhibit damping oscillating Patterns which depend sensitively on the scaling parameter and geometrical structure.Compared with the case that the emitting atom is immersed in dielectric,the spontaneous emission rate is depressed obviously and the center or the mean value of the oscillations is intimately related to the real refractive index of the local position where the atom is.In order to explain this phenomenon,we utilize the closed-orbit theory to deal with the classical trajectories of the emitted photon.and extract the corresponding frequencies of the oscillations by Fourier transform.It is found that the oscillations can be represented in terms of the closed-orbits of the photon motion constrained in dielectric microcavity,thus providing another perspective on the spontaneous emission of atom sandwiched by dielectric slabs.     

Cooling induced by parametric resonance in a magnetic quadrupole trap

It is demonstrated experimentally that the anharmonic property of the quadrupole trap can be exploited to cool trapped atoms by modulating the trap potential anisotropically.This cooling effect arises from the energy-selective removal of the most energetic trapped atoms and the thermal equilibrium of the remaining atoms.The frequency dependences of the temperature and the fraction of the atoms left in the trap after the modulation are explored.It is also demonstrated that the cooling induced by parametric resonance can also increase the phase space density of the trapped atoms.     

Novel optical packet with non-return-to-zero label and duobinary carrier-suppressed return-to-zero payload

A novel packet format with non-return-to-zero (NRZ) label and duobinary carrier-suppressed return-to-zero (DCS-RZ) payload is proposed for optical packet switching networks.NRZ label is followed by DCS-RZ payload with a certain guard time.The spectra of the low-rate NRZ label locate around the optical carrier frequency where some parts of the corresponding spectra of the high-rate DCS-RZ payload have been suppressed due to DCS-RZ modulation.At the switching node,the label or payload extraction can be realized simply through an optical bandpass or notch filter respectively.The feasibility of the scheme is verified by the simulation on the famous photonic design platform designed by Virtual Photonics Inc.(VPI).The effects of optical filter bandwidth on the received signal quality are discussed by analyzing bit error rate(BER)and contrast ratio performances.     

A model for aerosol mass concentration using an optical particle counter

A model for measuring aerosol mass concentration by an optical particle counter is presented using the conception of the average mass. In this model, to understand the meaning of the pulse height distribution of particles which is used to inverse mass concentration, the relationship among intensity distribution in the optical sensing volume, particle shape, and the pulse height distribution is discussed. To solve the instability of the equivalent factor, a novel two-step calibration method is proposed. The experimental results demonstrate that mass concentrations calculated by the model are in good agreement with those measured by a norm-referenced instrument. For samples of soot and air, the slopes of fitting lines of data points are 0.9582 and 0.9220, and the correlation coefficients are 0.9991 and 0.9965, respectively.     

Edge-pumped passively Q-switched thin Nd: YAG slab lasers

We report a high-power thin Nd: YAG slab laser with slab dimension of 1×10×60(mm) partially edgepumped by diode laser arrays.Passive Q-switching is achieved with a Cr4 : YAG microchip adopted as the saturable absorber mirror.The pulse duration is around 10ns while the pulse repetition rate is higher than 10kHz.The average output power of 70W is obtained with a slope efficiency of 36%.The diffraction limited beam quality in the thickness direction is obtained by controlling the pump beam diameter inside the slab.The laser head is very compact with size of only 60×74×150(mm).     

Three-dimensional optical logic devices using spatial multiwaveguide system

Based on the weakly coupled-mode theory, the coupled-mode equations of the spatial multiwaveguide system are presented in general. The intensity distribution in each waveguide is determined by numerical method. Optical logic devices based on spatial multiwaveguide system are proposed. The analysis results show that the spatial multiwaveguide system permits different Boolean logic states obtained by phase modulation.. Applications of the logic devices include optical calculation, optical interconnection, and spatial optical signal processing.