首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到18条相似文献,搜索用时 78 毫秒
1.
金属弯板广泛应用于车辆、船舶、飞机等大型装备结构件中,折弯处易形成应力集中产生裂纹,直接影响构件的使用安全和寿命。本文开展了不锈钢弯板裂纹缺陷Lamb波检测技术研究,计算了钢板的频散曲线,优选三种不同频率的S0模态:0.25MHz、0.5MHz、1MHz。利用COMSOL软件建立频域仿真模型,模拟了Lamb波在3mm厚“L”形弯板内部的传播情况,开展折弯板裂纹缺陷检测实验,并使用小波包变换的方法对实验信号进行分析。结果表明,经小波变换后,0.25MHz、0.5MHz、1 MHz的S0模态Lamb波均可用于裂纹缺陷的识别检测.  相似文献   

2.
多通道超声兰姆波检测板状结构中的裂纹   总被引:1,自引:1,他引:0       下载免费PDF全文
张正罡  刘丹  他得安 《应用声学》2015,34(3):189-194
超声兰姆(Lamb)波在结构缺陷检测方面愈来愈受到重视,但目前Lamb波的应用局限于单信号源激励,单通道接收的方法,容易受到噪声干扰,其后续的信号分析处理也比较复杂。本文旨在采用多通道Lamb波对板状结构中的裂纹进行定量分析与诊断。在铝板的表面凿刻出不同深度的凹槽作为裂纹,通过线阵换能器采集在一定传播距离内的多通道Lamb波信号,并采用二维傅里叶变换分析在不同深度的裂纹下,Lamb波模式能量的变化规律。结果表明,相对于完好铝板中的Lamb波信号,裂纹的存在会使Lamb波发生模式转换现象,并且转换模式能量百分比随裂纹深度的增加而线性增加。其结果为Lamb波评价板状结构中的裂纹状况提供了一种可能的方法。  相似文献   

3.
低阻抗水泥固井质量检测是油气田生产亟需解决的问题。套管中传播的最低阶泄漏弯曲型Lamb波(以下简称为A0弯曲型Lamb波)对套管后介质尤其是低阻抗水泥的声学参数和胶结状况具有很高的敏感性。通过建立多层介质模型,从理论上计算了其频散和衰减与套管后介质属性及水泥环第Ⅰ界面胶结状况的关系,并数值模拟了有限尺寸定向辐射探头激发和接收的全波波形。结果表明,在套管后耦合慢速水泥时,A0弯曲型Lamb波的频散曲线存在断点,曲线分为两个分支;A0弯曲型Lamb波的衰减在套管后耦合慢速水泥时最大并且对水泥环第Ⅰ界面胶结差时流体环厚度有很高的灵敏度,利用其衰减可以实现对套管后介质类型、水泥环第Ⅰ界面胶结状况及窜槽厚度的有效判别。  相似文献   

4.
戈浩  蔡桂喜  刘畅  董瑞琪 《应用声学》2013,32(5):341-347
用Nd:YAG激光器在2 mm厚的铝板上激发激光超声,通过激光反射镜偏转进行点阵扫描激励,用声发射传感器接收在铝板中传播的激光超声信号,通过信号放大和数据采集得到激光超声在铝板中传播的数据。对上述数据进行二维傅里叶变换得到了铝板中激光超声的模态分布和频率分布,接收到的激光超声是S0和A0两个模态多种频率的Lamb波。利用两个相同的探头对称地压紧在板的两个表面上,对两个探头接收到的信号进行相加和相减,可以将S0和A0模态分别提取出来。对单一模态的Lamb波再进行滤波,得到了窄频带单一模态的Lamb波。采用该方法实现了从杂乱的激光超声原始信号中提取出清晰的伤信号,并且得到了不同模态在不同频率范围的检测结果。  相似文献   

5.
窄频带Lamb波频散特性研究   总被引:1,自引:0,他引:1       下载免费PDF全文
李富才  孟光 《物理学报》2008,57(7):4265-4272
利用连续小波变换对从铝合金板结构中俘获的Lamb波信号进行分析,获得波信号在时间-尺度域的等高线和等高线脊线.根据Lamb波的频散特征、时间-尺度域等高线脊线的斜率和波在不同尺度下的到达时间,识别了Lamb波信号中各信息包的模式,并匹配出基础阶模式窄频带Lamb波在铝合金板结构中传播的实际频散曲线.对试验的Lamb波信号分析的结果表明该方法对于研究和应用窄频带Lamb波的频散特性是有效的. 关键词: 连续小波变换 Lamb波 频散  相似文献   

6.
周向超声导波对管道纵向缺陷检测的研究   总被引:2,自引:0,他引:2  
在弹性动力学理论的基础上,研究了管道中周向超声导波的传播及其频散特性,并数值计算了周向导波的频散曲线。通过所建立的超声导波实验系统,在理论上与实验上研究了斜探头的入射角、频率及周向导波模态的关系,并在外径为88.8 mm、内径为80.8 mm的管道中激励出特定的单一模态周向导波;同时,利用单一模态周向导波对该管道表面上长25 mm、宽1 mm、深0.7 mm的人工缺陷进行了检测。结果表明,同在板中激励单一Lamb波模态类似,选用特定角度的斜探头与特定频率可在管道中激励出单一周向导波模态并有望应用于管道缺陷的检测。  相似文献   

7.
对板状结构中Lamb波的频散和多模现象进行了理论分析,采用有限元仿真方法获取了Lamb波与缺陷作用后的回波信号,对信号进行聚焦接收处理,即在一定距离范围内利用导波频散特性对各个模式信号进行频散补偿,提取补偿后信号的幅值,结果表明当所得信号幅值最大时,所对应的补偿距离等于缺陷与换能器之间的实际距离。利用这一结论,提出了以寻找频散补偿后信号的峰值为核心的导波聚焦接收成像算法,在三维模型板中验证了该成像算法的有效性,与基于延时叠加的导波成像算法相比,可以在减少传感器数量的情况下获取高精度缺陷图像。该算法巧妙地利用了Lamb波的频散和模式转换特性对缺陷进行检测与成像,表明了聚焦接收成像法对板状结构缺陷检测的可行性。  相似文献   

8.
通过分析应力和位移边界条件得到了双层杆结构中纵向模态的频散方程,并进行数值求解,得到相应的频散曲线。对该结构中纵向模态的主要传播特性进行了分析。然后,利用长度伸缩型压电陶瓷片在内层为冰外层为钢的双层杆结构中进行了激励接收纵向模态的实验。实验结果与理论分析较为吻合。结果表明,双层杆结构的频散曲线可用作模态选取的理论指导,用于该结构的缺陷检测。  相似文献   

9.
超声Lamb波二次谐波发生效率分析与模式选择   总被引:1,自引:0,他引:1       下载免费PDF全文
在导波模式展开分析方法的基础上,提出激发效率参量来定量表征超声Lamb波积累二次谐波的发生效率。以P92钢板为例,理论计算得到了与频散曲线对应的理论激发效率参量分布图谱,从图谱中选择理论激发效率参量大小不同的两种基频Lamb波模式:纵波型S1模式和交点型A2/S2模式,分别测量这两种基频Lamb波模式在钢板中传播时产生的二次谐波信号。理论计算和实验测量结果表明,这两种基频Lamb波模式的理论和实验激发效率参量的比值基本一致,且激发效率参量较大的纵波型S1模式能激发出效率更高的二次谐波信号。研究结果表明激发效率参量可以有效的用于Lamb波二次谐波发生效率的表征及模式选择。   相似文献   

10.
脱粘缺陷对粘接结构频散特性的影响   总被引:1,自引:1,他引:0       下载免费PDF全文
采用全局矩阵理论,通过引入内聚强度弱化模型和弹簧模型,计算了脱粘缺陷对粘接结构频散特性的影响。分析了内聚强度缺陷、界面缺陷及混合缺陷等因素对粘接结构频散特性的影响,发现频散曲线的演化规律与材料声学性质密切相关。不同材料和不同组合,其规律有很大不同。针对各向同性粘接结构,可能通过考察特定频率段内频散模态的变化,实现对脱粘缺陷的检测。  相似文献   

11.
Shi Y  Wooh SC  Orwat M 《Ultrasonics》2003,41(8):623-633
The Laser-ultrasonic generation of Lamb waves in an elastic plate is investigated theoretically and experimentally for a laser source whose intensity is high enough to create reaction forces (normal tractions) on the illuminated surface of the specimen. The analytical solutions for transient waves are derived using the integral transform method first by considering an arbitrary source shape and time excitation function, and then specifically for circular and line source shapes. The simulation study allows us not only to predict the behavior of individual wave modes but also to construct the overall responses; thus it helps us better understand the wave excitation mechanisms. The dispersive and multi-modal nature of laser-generated Lamb waves is presented by showing the spatiotemporal Fourier transform of displacements obtained by the simulation study. The transform, displayed in the frequency-wave number domain, enunciates the characteristics of the propagating individual Lamb wave modes. The simulation results are then compared with the 2-D Fourier transform of a set of experimental data obtained by scanning an aluminum plate specimen.  相似文献   

12.
Ultrasonic Lamb waves are considered as a sensitive and effective tool for nondestructive testing and evaluation of plate-like or pipe-like structures. The nature of multimode and dispersion causes the wave packets to spread, and the modes overlap in both time and frequency domains as they propagate through the structures. By using a two-component laser interferometer technique, in combination with a priori knowledge of the dispersion characteristics and wave structure information of Lamb wave modes, a two-component signal processing technique is presented for implementing dispersion removal and mode separation simultaneously for two modes mixture signals of Lamb waves. The proposed algorithm is first processed and verified using synthetic Lamb wave signals. Then, the two-component displacements test experiment is conducted using different aluminum plate samples. Moreover, we confirm the effectiveness and robustness of this method.  相似文献   

13.
This paper studies the mode selection of Lamb waves for evaluating solid plates with liquid loading. For this purpose, the Lamb wave selected should have the features such as zero normal displacement components at the plate surface in contact with liquid, small dispersion, and maximum group velocity. It is found that when the phase velocity of Lamb wave is equal to the longitudinal wave velocity of the plate material, its normal displacement at the plate surface is always zero. Through the numerical analyses, the specific S2 Lamb wave that has zero normal displacement component at the plate surface, small dispersion and maximum group velocity compared with the other Lamb waves has been found. With respect to the specific S2 Lamb wave, some experimental examinations have been carried out. It is found that the liquid loading on the plate surface has less influence on the specific S2 Lamb wave signal but it can effectively eliminate the other signals. Moreover, the specific S2 Lamb wave selected exhibits the capability of detecting multiple defects in the solid plate with the liquid loading. It can be concluded that the specific S2 Lamb wave selected is suitable for the evaluation of solid plates with liquid loading.  相似文献   

14.
Based on linear three-dimensional elasticity theory, the wave equations of coupled Lamb waves in multilayered arbitrary anisotropic composite laminates are derived using a Legendre orthogonal polynomial approach. The elastodynamic solution for the propagation of coupled Lamb waves in composite plates is also presented to determine the characteristics of coupled Lamb waves. To verify the applicability and validity of the method, two cases of bi-layered plates formed with isotropic components and anisotropic components, respectively, are primarily manipulated for comparison with earlier known results. Next, the dispersion curves, displacements and stress distributions of Lamb waves in multilayered anisotropic laminates are calculated. The effects of coupling and fiber orientation on the characteristics of the Lamb waves are illustrated. The potential usefulness of the fundamental modes of the coupled Lamb waves is discussed in detail.  相似文献   

15.
倪龙  陈晓 《物理学报》2018,67(20):204301-204301
由于兰姆波的多模和频散特性,实际检测时在同一激发频率下存在多种模式的混合信号,而各模式信号有不同的频散特性,使得在时频混叠的情况下兰姆波的检测变得十分复杂.本文在频散补偿的基础上,通过时延函数建模,依靠不同模式频散趋势的差异性,将时频混叠信号的分离问题转化为部分模式混叠信号的分离问题.基于分数阶微分的理论,用信号幅值谱分数阶微分极大值和对应频率分别与微分阶次拟合多项式实现特征参数的提取并依靠特征参数重建幅值谱.结合相位谱重构时域信号以实现部分混叠信号中频散补偿后的模式的分离.最后恢复频散获得分离后的兰姆波信号.仿真和实验结果表明,本文方法不仅可以实现时频混叠多模式兰姆波信号的分离,更能保证分离精度,有助于复杂多模式频散信号的分离与处理的进一步研究.  相似文献   

16.
该文针对我国高速铁路轨道板缺陷的非接触动态检测问题,研究了空气耦合超声兰姆波在轨道板中的传播规律。首先,给出了轨道板中超声兰姆波的相速度和群速度频散曲线,结果表明:随着频厚积的增加,频散现象越明显,并且A0相速度收敛于Rayleigh波的波速。然后,建立轨道板中波传播的有限元模型,计算得到兰姆波传播的群速度为2220 m/s,且二维傅里叶变换系数的较大值沿Rayleigh波的频散曲线分布。最后,在沪杭高铁嘉兴南站进行了现场测试,以8.8°倾斜角向轨道板激励产生超声兰姆波,激发产生的兰姆波模态群速度为2325 m/s,且二维傅里叶变换分析其系数的较大值沿Rayleigh波的频散曲线分布。有限元计算结果和实验结果均与理论计算结果一致。该研究为后续轨道板缺陷的非接触动态检测提供了理论依据和实验方法。  相似文献   

17.
The propagation of Lamb waves in a plate bordered with layers of a liquid.   总被引:2,自引:0,他引:2  
The influence of liquid layers on the propagation of Lamb waves in a plate of finite thickness is studied theoretically. The dispersion equations of Lamb waves in a plate bordered with layers of liquids are derived. Numerical solutions of the equations show that the phase velocity of Lamb waves changes with the thickness of the liquid layers. For the lowest antisymmetrical mode of very thin plates, the numerical results calculated from the dispersion equations are compared with those derived from the bending wave acoustic impedance approach. The limitation of the latter is discussed. Applications of Lamb waves pertinent to biosensing are also presented.  相似文献   

18.
We analyze the effect of second-harmonic generation(SHG) of primary Lamb wave propagation in a two-layered composite plate, and then investigate the influence of interfacial properties on the said effect at low frequency. It is found that changes in the interfacial properties essentially affect the dispersion relation and then the maximum cumulative distance of the double-frequency Lamb wave generated. This will remarkably influence the efficiency of SHG. To overcome the complications arising from the inherent dispersion and multimode natures in analyzing the SHG effect of Lamb waves, the present work focuses on the analysis of the SHG effect of low-frequency dilatational Lamb wave propagation. Both the numerical analysis and finite element simulation indicate that the SHG effect of low-frequency dilatational Lamb wave propagation is found to be much more sensitive to changes in the interfacial properties than primary Lamb waves. The potential of using the SHG effect of low-frequency dilatational Lamb waves to characterize a minor change in the interfacial properties is analyzed.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号