共查询到20条相似文献,搜索用时 78 毫秒
1.
对中等强度聚焦超声在生物样品中产生的热效应以及激光协同超声增强热效应进行了实验和理论研究。实验上,对生物和仿生样品在超声作用和激光协同超声作用下加热情况进行测量,通过对比表明,激光协同超声作用于生物样品,引起空化效应以及温度升高更为明显。同时,理论上对聚焦超声在生物样品中衰减产生的热效应、超声空化以及激光协同超声增强空化及其产生热效应进行机理分析。通过对机理的分析表明,激光引起的光致核化使超声空化更易于产生,有效的增强空化效应,进而增强热效应。为对具体实验给出量化分析和估算,通过理论与实验结果相拟合,对超声传播引起的温度升高进行计算,并估算超声和激光协同超声产生空化微泡对加热效应的不同贡献,为空化效应在超声治疗中的贡献提供参考数据。 相似文献
2.
研究高功率微波作用下等离子体中的雪崩效应,对于研究等离子体防护技术具有重要意义.通过采用等离子体流体近似方法,建立等离子体中的波动方程、电子漂移-扩散方程和重物质传递方程,表征电磁波在等离子体中的传播以及等离子体内部带电粒子的变化情况,分析研究了高功率微波作用下雪崩效应的产生过程和变化规律.研究表明,入射电磁波功率决定了雪崩效应的产生;初始电子密度能够影响雪崩效应产生的时间;入射电磁波的激励作用初始表现为集聚效应,当激励能量积累到一定阈值时,雪崩效应才会产生;在雪崩效应产生过程中,等离子体内部电子密度的变化非常迅速并且比较复杂.雪崩效应产生后,等离子体内截止频率会远超过入射波频率,电磁波不能在等离子体中传播,从而起到防护高功率微波的效果. 相似文献
3.
4.
用计算量子场论方法研究了非线性啁啾频率对势阱中正负电子对产生的增强效应。研究了由静态势阱和动态势阱组成的组合势阱中产生的正负电子对的密度、产额和能谱等性质随着啁啾参数的变化,分析了组合势阱的频谱和瞬时束缚态。发现非线性啁啾效应对低频区域比较敏感,与固定频率情况相比可以使粒子数增加2~3倍。与组合势阱相比,非线性啁啾效应对单个振荡势阱更敏感。在低频下单个振荡的势阱中正负电子对产额可提高多个数量级。这是因为在低频下单个振荡的势阱中,主要通过量子隧穿过程产生的正负电子对数目非常低。非线性啁啾效应增加了高频场成分,提高了多光子过程和动力学辅助机制。由于高频抑制作用,所以非线性啁啾效应对高频区域粒子的增量不大,甚至会抑制正负电子对的产生。 相似文献
5.
6.
7.
光纤热极化过程的实时测试研究 总被引:1,自引:0,他引:1
通过热极化可以使中心对称的熔石英光纤中产生二阶非线性效应和线性电光效应。为了解各热极化过程参量对热极化产生的线性电光效应的影响,利用全保偏光纤马赫一曾德尔干涉仪构造了一套光纤热极化的实时线性电光效应测试系统,并利用其进行了光纤热极化全过程的监控测试。在线测试了热极化过程的一些参量,例如极化电压、极化时间、以及极化温度等对热极化光纤中产生的线性电光效应的影响。实时测试研究表明,在光纤中施加尽可能高的极化电场将可能在光纤中产生较高的线性电光效应。对侧边抛磨光纤结构的热极化器件,考虑到器件的抗强电场击穿能力,可选用3.o~4.0kV左右的极化直流电压。当施加3.0kV左右的极化电压时,热极化优化时间约为16min,最佳热极化加热温度约为190℃。 相似文献
8.
《光学学报》2016,(7)
运用分步傅里叶变换法对适用于超短艾里脉冲的高阶耦合非线性薛定谔方程进行了求解,利用Matlab软件对超短艾里脉冲在单模光纤中传输时相互作用的演化过程进行了数值模拟。结果表明,负三阶色散效应可加快波包的渗透速度,超短脉冲可传输更远距离;正三阶色散效应可减慢超短脉冲的传输,当三阶色散系数足够大时脉冲前沿处的振荡转移到后沿处。自陡峭效应通过孤子分裂的形式使超短脉冲产生时域位移,内拉曼效应导致脉冲在波长较长一侧产生拉曼自频移,且超短脉冲的能量由前沿处转移到后沿处。自陡峭效应和内拉曼效应的共同作用导致超短脉冲产生时域位移且脉冲前沿处的能量会转移到后沿处。三阶色散效应、自陡峭效应、内拉曼效应三者同时存在时会显著影响超短艾里脉冲相互作用的自弯曲特性和自加速特性。 相似文献
9.
为研究激光陀螺精细模耦合作用,考虑了增益介质中的粒子数脉动效应.从激光器物理原理出发,分析了粒子数脉动效应的产生机制,结合四频差动激光陀螺特点,得出粒子数脉动效应是一种精细模耦合效应,不同激光模式间的拍频使增益介质中粒子数布居差产生调制,进而对模耦合产生影响.数值计算了粒子数脉动在耦合效应中的大小.计算结果表明:粒子数脉动效应和其他耦合效应随腔频变化基本一致,在大多数腔频范围内数值较小,为其他耦合效应的4%以下;在某些腔频范围(如0.37<ξ<0.46,0.02<ξ<0.06,0.86<ξ<0.88)有较大数值,为其他耦合效应的80%以上,在激光陀螺的模耦合分析中不可忽略. 相似文献
10.
11.
Yongxiang Zhu Qisheng Lu Shaofeng Guo Xiaojun Xu Xiang′ai Cheng 《Optics Communications》2008,281(17):4523-4525
We present a method of threshold reduction of stimulated Brillouin scattering by importing Stokes seeds, which are generated from the light passing through the Brilloun medium via an acousto-optic medium. To realize the scheme, the acousto-optic medium and the Brillouin medium should be of the same material, and the frequency of the transducer must be identical with the Brillouin shift. Essentially, the transducer and the acousto-optic medium constitute a special acousto-optic shifter. Calculations suggest that it is easy to reduce the SBS threshold by at least one magnitude and enhance the reflectivity remarkably by this scheme. 相似文献
12.
XIE Fangsen LEI Minsheng GUO Qin 《Chinese Journal of Lasers》1997,6(6):563-569
EvolutionofthePhotonnumberProbabilityDistributionintheSystemofaThreLevelAtomwithanAddedKerlikeMediumXIEFangsenLEIMinshengGU... 相似文献
13.
散射介质中层间杂质检测是一个非常重要的研究课题.改进现有的Monte Carlo方法,模拟大量光子在散射介质中的传输,得到入射光强、杂质埋藏深度、介质折射率、介质散射系数和各向异性因子对光学透反射成像法检测层间杂质效率的影响规律.结果表明,入射光强、杂质埋藏深度和介质折射率对透反射成像检测结果均有影响,且影响规律相似.增加入射光强、减小杂质埋藏深度或减小介质折射率均可提高反射光成像的检测效率;增大入射光强、减小介质折射率、减小介质散射系数或增大各向异性因子均可提高透射光成像的检测效率.这些规律对散射介质中层间杂质检测具有一定指导意义. 相似文献
14.
15.
16.
Akhlesh Lakhtakia 《International Journal of Infrared and Millimeter Waves》1994,15(10):1625-1630
The Tellegen medium is macroscopically indistinguishable from an isotropic dielectric-magnetic medium. That may be why the Tellegen medium has never been observed. 相似文献
17.
A method to measure the Brillouin frequency shift of the medium through Brillouin amplification ratio 下载免费PDF全文
In order to measure the Brillouin frequency shift (BFS) of the medium, this paper proposes a method using mixtures in a two-cell stimulated Brillouin scattering system, which uses a medium to be measured as amplifier medium and a mixture medium as generator medium. The seed light from the generator gains effective amplification in the amplifier and the amplification ratio changes with the mixing fraction, Only when the BFS of the mixture medium is equal to that of the medium in the amplifier does the seed light obtain the maximum amplification ratio. The method has the advantage of independence of the wavelength of the incident light. 相似文献
18.
A theoretical investigation of the absorption of the pump light at different intensities through a four-level solid-state laser medium is presented. It is found that the variation of the pump intensity inside the laser medium cannot always simply be dominated by Beer's law. Transmission of the pump light through this laser medium is closely related to the pump intensity itself. In fact, when the pump intensity is relatively low, whose values depend on the characteristics of the medium, the variation of the pump light through the laser medium is consistent with Beer's law. However, while the pump intensity is high enough, the relationship between the transmission of the pump light and its propagation distance is demonstrated to be linear. These theoretical results have been confirmed by the experiment with a medium of YAG:Nd. 相似文献
19.
降低阈值是随机激光实用化的前提, 随机光纤激光器是将随机增益介质填充到空芯光子晶体光纤中利 用其光子禁带来降低阈值的一种随机激光器. 理论分析表明: 在光子晶体光纤光子禁带的约束下, 随机光纤激光器中的大部分能量被集中在芯区传播, 这使局域在芯区的光与随机介质相互作用得到增强, 激发效率得以提高. 然而, 光纤填充介质后, 纤芯等效折射率发生了改变, 光子带隙也会随之移动, 因此当选用带隙光纤来降低阈值时, 只考虑光纤本身的带隙是不够的, 应考虑到介质的增益频率和填充后的光子带隙之间的匹配问题, 合理选择光纤或介质的材料, 如果匹配得当, 光子禁带对激光的调控能力会更强, 激光阈值有望得到更大程度的降低.
关键词:
随机激光
光子晶体光纤
光子禁带
阈值 相似文献
20.
Based on the diffraction theory model for hot image formation, the evolution of the hot image effect in a high-power laser system structured by cascaded Kerr medium with gain and loss is numerically investigated. For a sample simulation system with five pieces of Kerr medium plates arrayed in parallel, the dependences of the peak intensity and the location of the hot image on different parameters of the scatterer and the system are analyzed. It is shown that the possible damage spots caused by the beam peak intensity would be repetitious in the laser system with cascaded medium. Arranging the Kerr medium plates and the downstream optical components in a rational way (for instance increasing the interval between two adjacent medium plates, arranging the Kerr medium plates aperiodically or certain optical components properly) may be helpful to relax or avoid the optical damage caused by the hot image effect. 相似文献