Thermal decomposition of dichloroketene and its reaction with H atoms

The thermal unimolecular decomposition of dichloroketene CCl₂CO → CCl₂ + CO (reaction 1) was studied experimentally and computationally. Dichloroketene was produced by the pulsed laser photolysis of hexachloroacetone, and the kinetics of its decay due to reaction 1 was monitored using photoionization mass spectrometry. Rate constants of reaction 1 were determined in direct time-resolved experiments as a function of temperature (740–870 K) and bath gas density ([He] = (3–25) × 10¹⁶ atom cm⁻³, [N₂] = 12 × 10¹⁶ molecule cm⁻³). Reaction 1 is in the falloff region under these conditions. The potential energy surface (PES) of reaction 1 was studied using quantum chemical methods. The experimental k₁ (T, P) dependence was reproduced with an RRKM/master equation model based on quantum chemical calculations. Parameterized expressions for the rate constants of reaction 1 and the reverse reaction, that of CCl₂ with CO, were obtained over wide ranges of temperatures and pressures. The enthalpy of formation of CCl₂CO was determined in quantum chemical calculations. The kinetics of the reaction of dichloroketene with hydrogen atoms (reaction 2), an important channel of destruction of CCl₂CO in flames, was studied computationally. The PES of reaction 2 was studied using quantum chemical methods. Temperature and pressure dependences of the rate constants of the four dominant reaction channels were obtained in transition state theory and master equation calculations; the technique of isodesmic reactions for transition states was applied to the channel of Cl atom abstraction. Analysis of the experimental data and the computational models of reactions 1 and 2 demonstrates that thermal decomposition is a major pathway of destruction for dichloroketene in combustion systems.     

Tandem diazonium salt electroreduction and click chemistry as a novel, efficient route for grafting macromolecules to gold surface

Bis-alkynylated oligoethyleneglycol (OEG) and a monopropargyl-functionalized perfluorinated ethylene glycol (FEG) were clicked to azide-functionalized gold surface (Au–N₃) at room temperature via the well known 1,3 cycloaddition click chemical reaction. The Au–N₃ substrate was obtained by nucleophilic attack of NaN₃ on gold substrates modified by the electrochemical reduction of the , ⁺N₂–C₆H₄–CH₂Br diazonium salt. This electrochemical process yields aryl layer-modified gold of the type Au–C₆H₄–CH₂Br (hereafter Au–Br). The untreated and modified gold plates were examined by XPS, PMIRRAS and contact angle measurements. XPS brought evidence for electrografting aryl layers by the detection of Br3d; azide functionalization by the increase of the N/Br atomic ratio; and click reaction of OEG with Au–N₃ by the increase of O/N ratio. In addition, the perfluorinated plate (Au-FEG) exhibited F1s and characteristic C1s peaks from -(CF₂)₇- chain and terminal CF₃. Infra red spectroscopy (PMIRRAS) evidenced (i) grafting N₃ to Au–Br; (ii) characteristic stretching bands, from ethylene glycol units, C–O–C (1100–1300 cm⁻¹); CF₂ (1000–1100 cm⁻¹) and CF₃ (1100–1350 cm⁻¹) from FEG grafts; and (iii) suppression of alkynyl bands from OEG and FEG after surface click chemistry. More importantly, PMIRRAS results support an important bridging of the bispropargyl oligoethylene glycol at the gold surface. Water drop contact angles were found to be 48.7° and 83.0° for Au-OEG and Au-FEG, respectively, therefore highlighting the control over the hydrophilic/hydrophobic character of the clicked substrate.This work shows that clicking macromolecules to grafted, diazonium salt-derived aryl layers is a novel, simple and valuable approach for designing robust, functional surface organic coatings.     

Elementary reactions of formyl (HCO) radical studied by laser photolysis—transient absorption spectroscopy

Several elementary reactions of formyl radical of combustion importance were studied using pulsed laser photolysis coupled to transient UV–Vis absorption spectroscopy: HCO → H + CO (1), HCO + HCO → products (2), and HCO + CH₃ → products (3). One-pass UV absorption, multi-pass UV absorption as well as cavity ring-down spectroscopy in the red spectral region were used to monitor temporal profiles of HCO radical. Reaction (1) was studied over the buffer gas (He) pressure range 0.8–100 bar and the temperature range 498–769 K. Reactions (2a), (2b), (2c), (3a) and (3b) as well as the UV absorption spectrum of HCO, were studied at 298 and 588 K, and the buffer gas (He) pressure of 1 bar. Pulsed laser photolysis (308, 320, and 193 nm) of acetaldehyde, propionaldehyde, and acetone was used to prepare mixtures of free radicals. The second-order rate constant of reaction (1) obtained from the data at 1 bar is: k₁(He) = (0.8 ± 0.4) × 10⁻¹⁰exp(−(66.0 ± 3.4) kJ mol⁻¹/RT) cm³ molecule⁻¹ s⁻¹. The HCO dissociation rate constants measured in this work are lower than those reported in the previous direct work. The difference is a factor of 2.2 at the highest temperature of the experiments and a factor of 3.5 at the low end. The experimental data indicate pressure dependence of the rate constant of dissociation of formyl radical 1, which was attributed to the early pressure fall-off expected based on the theory of isolated resonances. The UV absorption spectrum of HCO was revised. The maximum absorption cross-section of HCO is (7.3 ± 1.2) × 10⁻¹⁸ cm² molecule⁻¹ at 230 nm (temperature independent within the experimental error). The measured rate constants for reactions (2a), (2b), (2c), (3a) and (3b) are: k₂ = (3.6 ± 0.8) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹ (298 K); k₃ = (9.3 ± 2.3) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹(298 and 588 K).     

N Chemical Shift Tensor Magnitude and Orientation in the Molecular Frame of Uracil Determined via MAS NMR

The potential of heteronuclear MAS NMR spectroscopy for the characterization of ¹⁵N chemical shift (CS) tensors in multiply labeled systems has been illustrated, in one of the first studies of this type, by a measurement of the chemical shift tensor magnitude and orientation in the molecular frame for the two ¹⁵N sites of uracil. Employing polycrystalline samples of ¹⁵N₂ and 2-¹³C,¹⁵N₂-labeled uracil, we have measured, via ¹⁵N–¹³C REDOR and ¹⁵N–¹H dipolar-shift experiments, the polar and azimuthal angles (θ, ψ) of orientation of the ¹⁵N–¹³C and ¹⁵N–¹H dipolar vectors in the ¹⁵N CS tensor frame. The (θ_NC, ψ_NC) angles are determined to be (92 ± 10°, 100 ± 5°) and (132 ± 3°, 88 ± 10°) for the N1 and N3 sites, respectively. Similarly, (θ_NH, ψ_NH) are found to be (15 ± 5°, −80 ± 10°) and (15 ± 5°, 90 ± 10°) for the N1 and N3 sites, respectively. These results obtained based only on MAS NMR measurements have been compared with the data reported in the literature.     

Plasma supported combustion

Oxidation of molecular hydrogen and different hydrocarbons in stoichiometric mixtures with air and oxygen in the pulsed nanosecond discharges was studied at room temperature, and the detailed kinetics of the process has been numerically investigated. In the discharge afterglow, the reactions including electron-excited particles play a dominant role for the time up to 100 ns, ion–molecular reactions—for the time of microsecond range, and reactions including radicals mostly contribute for the time interval of several milliseconds. The principal role of processes with formation of excited components that support the development of the chain mechanism of oxidation has been shown. The spatial uniformity of the gas-mixture combustion initiated by a high-voltage nanosecond volume discharge is investigated at gas pressures of 0.3–2.4 atm and temperatures of 1000–2250 K. The self-ignition time and the time of discharge-induced ignition are determined. It is found that the discharge significantly (by 600 K) decreases the ignition temperature with very low energy in the discharge (10⁻² J/cm³). The influence of gas excitation by a pulsed nanosecond discharge with a high-voltage pulse amplitude up to 25 kV on the properties of a premixed propane–air flame has been investigated over a wide range of the equivalence ratios (0.4–5). It was experimentally found that the flame’s blow-off velocity increased more than twice at a discharge energy input less than 1% of the burner power. Efficient production of active radicals under the action of a barrier discharge has been observed. The increase in the flame’s propagation velocity is explained by the production of atomic oxygen in a discharge by the quenching of electronically excited molecular nitrogen N₂ and the dissociation of molecular oxygen on electron-impact. A numerical model has been developed, which describes the influence of pulsed electric discharges on the ignition, combustion, and flame propagation.     

Matrix reactions of alkaline earth metal atoms with ozone : Infrared spectra of the metal ozonide and metal oxide molecules

The 15°K deposition of alkaline earth metal atoms and ozone molecules at high dilution in argon yielded intense bands near 800 cm⁻¹ and in the region, 450–650 cm⁻¹. The bands near 800 cm⁻¹ showed the appropriate oxygen isotopic shifts for assignment to ν₃ of the ozonide ion; the use of scrambled isotopic ozones indicated that the metal cation is symmetrically bound to the ozonide anion which contains three oxygen atoms with two equivalent oxygens. For the case of Ca and Ba atoms and ozone, infrared absorptions appeared between 450–650 cm⁻¹ which showed appropriate oxygen isotopic shifts for vibrational assignment to several metal oxide species. In the calcium experiments, bands at 635.7 and 575.5 cm⁻¹ which showed diatomic oxygen-18 isotopic shifts were tentatively identified as (CaO)₂ species; a pair of bands at 593.0 and 592.2 cm⁻¹ were tentatively assigned to CaO₂. For the barium reactions, bands at 634.7, 571.3, and 460.0 showed appropriate oxygen-18 frequency shifts for assignment to BaO, BaO₂, and (BaO)₂, respectively. The BaO assignment was confirmed by the N₂O-nitrogen matrix reaction which yielded a nitrogen matrix counterpart for BaO at 612.4 cm⁻¹.     

Rashba polarization in HgCdTe inversion layers at large depletion charges

The Rashba effect in metal–insulator–semiconductor (MIS) structures based on zero-gap HgCdTe is investigated experimentally and theoretically over a wide doping range N_A–N_D=3×10¹⁵–3×10¹⁸ cm⁻³. Increase of doping enlarges the magnitude of the effect at the same 2D concentration and strengthens a gate-voltage dependence of the Rashba splitting. The results demonstrate values of Rashba polarization as high as P_R0.5 and a capability to control the Rashba effect strength at constant electron concentration.     

Oxygen nonstoichiometry of Sr(Co,Fe)O3−δ-based perovskites: I. Coulometric titration of SrCo0.85Fe0.10Cr0.05O3−δ by the two-electrode technique

The p(O₂)–T–δ diagram of perovskite-type SrCo_0.85Fe_0.10Cr_0.05O_3−δ was determined by the coulometric titration technique in the temperature range 770–1250 K at oxygen partial pressures from 8 10⁻¹⁰ to 0.5 atm. Stability of the cubic perovskite phase of SrCo_0.85Fe_0.10Cr_0.05O_3−δ, existing down to the oxygen pressures of 10⁻³–10⁻⁵ atm, was found to be slightly higher than that of SrCo_0.80Fe_0.20O_3−δ, probably due to stabilization of oxygen octahedra neighboring Cr⁴⁺ cations. When the oxygen nonstoichiometry of the Cr-containing perovskite decreases from 0.47 to 0.38, the partial molar enthalpy and entropy for overall oxygen incorporation reaction vary in the ranges −165 to −60 kJ mol⁻¹ and 90 to 150 J mol⁻¹ K⁻¹, respectively. Within the stability limits of the single perovskite phase, the p(O₂)–T–δ diagram can be adequately described by equilibrium processes of oxygen incorporation, cobalt disproportionation and interaction of cobalt and iron cations, with the thermodynamic functions independent of defect concentrations. Increasing grain size in SrCo_0.85Fe_0.10Cr_0.05O_3−δ ceramics from submicron size to 100–200 μm has no effect on the oxygen thermodynamics. The two-electrode coulometric titration technique, based on the alternate use of electrodes for oxygen pumping and e.m.f. measurements, is described and verified by studying oxygen nonstoichiometry of La_0.3Sr_0.7CoO_3−δ and PrO_x.     

Argon and nitrogen broadening in the pure rotational spectrum of HCl

The Ar- and N₂-broadened linewidths have been measured for the first four pure rotational transitions of HCl. The spectra were taken by means of a Fourier transform spectrometer working in the range 10–100 cm⁻¹ with an apodized resolution of 0.05 cm⁻¹. The results obtained generally agree with those of other authors. Comparison is also made with the most recent results of various theoretical calculations.     

Self-assembling of C and Sn in Ge

Self-assembling of isoelectronic C and Sn impurities in Ge is predicted. The formation of the 1C4Sn tetrahedral cells is thermodynamically profitable in Ge-rich C_xSn_yGe_1−x−y (4x<y) alloys in the ultra dilute C impurity limit with 1×10^-8x1×10^-3. The concentrations of Sn atoms when all C atoms are surrounded only by Sn atoms are estimated for the lower molecular beam epitaxy, intermediate annealing and higher bulk crystallization temperatures. The origin of this phenomenon is a considerable decrease of the strain energy after self-assembling. The same self-assembling in Si is thermodynamically non-profitable due to the large cohesive energy of Si–C chemical bonds.     

Study of Autoxidation of Ascorbic Acid in Acetonitrile by Electronic Absorption Spectra

The autoxidation of vitamin C has been studied in acetonitrile by electronic spectroscopy. Some interesting data on the role of acetonitrile in autoxidation have been obtained, perhaps for the first time. A parallelism between hydroxyl ions and CH₂CN⁻, the ions from the self-ionization of acetonitrile, has been established. The CH₂CN⁻ anion is similar to hydroxyl anions in initiating and propagating the decomposition of ascorbic acid, at least in this system. The intermediates involved in the overall reaction in nonaqueous media have been identified by simple means.__________Published in Zhurnal Prikladnoi Spektroskopii, Vol. 72, No. 2, pp. 274–276, March–April, 2005.     

Electrical conductivity of Ag/Na ion-exchanged titanosilicate glasses

The Ag₂O–TiO₂–SiO₂ glasses were prepared by Ag⁺/Na⁺ ion-exchange method from Na₂O–TiO₂–SiO₂ glasses at 380–450 °C below their glass transition temperatures (T_g), and their electrical conductivities were investigated as functions of TiO₂ content and the ion-exchange ratio (Ag/(Ag+Na)). In a series of glasses 20R₂O·xTiO₂·(80−x)SiO₂ with x=10, 20, 30 and 40 in mol%, the electrical conductivities at 200 °C of the fully ion-exchanged glasses of R=Ag were in the order of 10⁻⁵ or 10⁻⁴ S cm⁻¹ and were 1 or 2 orders of magnitude higher than those of the initial glasses of R=Na. The glass of x=30 exhibited the highest increase of conductivity from 3.8×10⁻⁷ to 1.3×10⁻⁴ S cm⁻¹ at 200 °C by Ag⁺/Na⁺ ion exchange among them. When the ion-exchange ratio was changed in 20R₂O·30TiO₂·50SiO₂ system, the electrical conductivity at 200 °C exhibited a minimum value of 7.6×10⁻⁸ S cm⁻¹ around Ag/(Ag+Na)=0.3 and increased steeply in the region of Ag/(Ag+Na)=0.5–1.0. When the ion-exchange temperature was changed from 450 to 400 °C, the conductivity of the ion-exchanged glass of x=30 decreased. The infrared spectroscopy measurement revealed that the ion-exchange temperature of 450 °C induced a structural change in the glass of x=30. The T_g of the fully ion-exchanged glass of x=30 was 498 °C. It was suggested that the incorporated silver ions changed the average coordination number of titanium ions to form higher ion-conducting pathway and resulted in high conductivity in the titanosilicate glasses.     

Effect of annealing in N2 atmosphere on net acceptor concentration in ZnSe:N grown by MOCVD

Annealing effect on net acceptor concentration in ZnSe:N is investigated. ZnSe:N homo-epitaxial layer was grown at 823 K by MOCVD using ammonia (NH₃) as a dopant source. Photoluminescence (PL) spectra measured on as-grown layer exhibited the strong deep donor–acceptor pair (D^dAP) emission and the weak I₁^N emission line. In order to enhance the activation of nitrogen in ZnSe epitaxial layer, sample was annealed at the 823 K in nitrogen (N₂) and hydrogen (H₂) atmosphere. Only the annealing in nitrogen atmosphere increased I₁^N emission intensity indicate the activation of nitrogen acceptor. And net acceptor concentration was estimated to be 3 × 10¹⁷cm⁻³ by C–V measurements. This activation mechanism is interpreted as hydrogen is released from N–H bonds during annealing in nitrogen atmosphere.     

Fourier Transform Spectroscopy of theYΣ–XΠiTransition of CuO

TheY²Σ⁺–X²Π_inear-infrared electronic transition of CuO was observed at high resolution for the first time. The spectrum was recorded with the Fourier transform spectrometer associated with the McMath–Pierce Solar Telescope at Kitt Peak. The excited CuO molecules were produced in a low pressure copper hollow cathode sputter with a slow flow of oxygen. Constants for theY²Σ⁺states of CuO are:T₀= 7715.47765(54) cm⁻¹,B= 0.4735780(28) cm⁻¹,D= 0.822(12) × 10⁻⁶cm⁻¹,H= 0.46(10) × 10⁻¹⁰cm⁻¹, γ = −0.089587(42) cm⁻¹, γ_D= 0.1272(79) × 10⁻⁶cm⁻¹,b_F= 0.12347(22) cm⁻¹, andc= 0.0550(74) cm⁻¹. ImprovedX²Π_iconstants are also presented.     

Thermal oxidation of n-type ZnN films made by -sputtering from a zinc nitride target, and their conversion into p-type films

Transparent p-type thin films, containing zinc oxide phases, have been fabricated from the oxidation of n-type zinc nitride films. The zinc nitride thin films were deposited by rf-magnetron sputtering from a zinc nitride target in pure N₂ and pure Ar plasma. Films deposited in Ar plasma were conductive (resistivity 4.7×10⁻² Ω cm and carrier concentrations around 10²⁰ cm⁻³) Zn-rich Zn_xN_y films of low transmittance, whereas Zn_xN_y films deposited in N₂ plasma showed high transmittance (>80%), but five orders of magnitude lower conductivity. Thermal oxidation up to 550 C converted all films into p-type materials, exhibiting high resistivity, 10²–10³ Ω cm, and carrier concentration around 10¹³ cm⁻³. However, upon oxidation, the Zn_xN_y films did not show the zinc oxide phase, whereas Zn-rich Zn_xN_y films were converted into films containing ZnO and ZnO₂ phases. All films exhibited transmittance >85% with a characteristic excitonic dip in the transmittance curve at 365 nm. Low temperature photoluminescence revealed the existence of exciton emissions at 3.36 and 3.305 eV for the p-type zinc oxide film.     

High-Resolution Laser Spectroscopy of YbCl: The AΠ–XΣ Transition

The A²Π–X²Σ⁺ transition of ¹⁷⁴Yb³⁵Cl and ¹⁷²Yb³⁵Cl has been rotationally analyzed for the first time. Doppler-limited laser excitation spectroscopy with selective detection of fluorescence was used to obtain spectra of the 0–0 and 1–0 bands with a measurement accuracy of approximately 0.0035 cm⁻¹. Resolved fluorescence was used to record the 0–1, 0–2, and 0–3 bands and to unequivocally assign the rotational numbering, N, to the laser excitation spectra. In total, over 1300 line positions have been measured and assigned for each of the two isotopomers and employed in least-squares fits of molecular parameters. The principal results for the A²Π state are A_e = 1491.494(2) cm⁻¹ and R_e = 2.4433(1) Å, and for the X²Σ⁺ state, R_e = 2.4883(2) Å and γ_e = 4.59(2) × 10⁻³ cm⁻¹. The interaction between the X²Σ⁺ and A²Π states has been investigated and is shown to be the main contributor to the spin–rotation splitting in the ground state.     

The Hall effect in selectively doped strained-layer Ge-Ge1−xSix superlattices superlattices

For the first time, research on the unique galvanomagnetic properties of the hole gas in the channels of selectively doped CVD Ge-Ge_1−XSi_X (X≤0, 2) superlattices with strained Ge layers was carried out. We have obtained a high value of the hole mobility 1.5 × 10⁴ cm²/V s (T = 4, 2 K) at a hole concentrations of (1–5) × 10¹⁷ cm⁻³ in SLs channels. It is shown that the main contribution into the longitudinal conductivity of strained Ge-Ge_1−XSi_X SL due to light hole band splitting under the strains in Ge layers.     

Calculation of current–voltage characteristics of a Cu (II) complex/n-Si/AuSb Schottky diode

In this study, Cu (II) complex/n-Si structure has been fabricated by forming a thin organic Cu (II) complex film on n-Si wafer. It has been seen that the structure has clearly shown the rectifying behaviour and can be evaluated as a Schottky diode. The contact parameters of the diode such as the barrier height and the ideality factor have been calculated using several methods proposed by different authors from current–voltage (I–V) characteristics of the device. The calculated barrier height and ideality factor values from different methods have shown the consistency of the approaches. The obtained ideality factor which is greater than unity refers the deviation from ideal diode characteristics. This deviation can be attributed to the native interfacial layer in the organic/inorganic interface and the high series resistance of the diode. In addition, the energy distribution of the interface state density (N_ss) in the semiconductor band gap at Cu (II) complex/n-Si interface obtained from I–V characteristics range from 2.15 × 10¹³ cm⁻² eV⁻¹ at (E_c − 0.66) eV to 5.56 × 10¹² cm⁻² eV⁻¹ at (E_c − 0.84) eV.     

Conductance studies of NaCl, KCl, NaBr, NaI, NaBPh4, Bu4NI and NaClO4 in water + 2-methoxyethanol mixtures at 298.15 K

The electrical conductances of the solutions of sodium chloride (NaCl), potassium chloride (KCl), sodium bromide (NaBr), sodium iodide (NaI), sodium tetraphenylborate (NaBPh₄), tetrabutylammonium iodide (Bu₄NI) and sodium perchlorate (NaClO₄) in water (1) + 2-methoxyethanol (2) mixtures containing 0.01, 0.025, 0.05, 0.075, 0.10, 0.15 and 0.20 mol fractions of 2-methoxyethanol have been reported at 298.15 K. The conductance data have been analyzed by the Fuoss–Justice equation. The individual limiting ionic conductivities of Na⁺, K⁺, Bu₄N⁺, BPh₄⁻, I⁻, Cl⁻, and Br⁻ ions have been determined using the Fuoss–Hirsch assumption. The dependencies of the limiting molar conductances, Λ_o, and Walden products, Λ_oη, versus mixed solvent composition have been discussed.     

Rotational absorption spectrum of methylene fluoride in the 20–100 cm region

The pure rotational spectrum of CH₂F₂ was recorded in the 20–100 cm⁻¹ spectral range and analyzed to obtain rotation and centrifugal distortion constants. Analysis of the data yielded rotation constants: A = 1.6392173 ± 0.0000015, B = 0.3537342 ± 0.00000033, C = 0.3085387 ± 0.00000027, τ_aaaa = −(7.64 ± 0.46) × 10⁻⁵, τ_bbbb = −(2.076 ± 0.016) × 10⁻⁶, τ_cccc = −(9.29 ± 0.12) × 10⁻⁷, T₁ = (4.89 ± 0.20) × 10⁻⁶, and T₂ = −(1.281 ± 0.016) × 10⁻⁶cm⁻¹.