悬臂式光纤探针的传光特性研究

根据标量波动方程，运用高斯近似法，从理论上说明光信号在悬臂式光纤探针中的传输特性和能量损耗，并用自制探针的具体数据，求出由于弯曲造成的光场偏移量；用实验方法测量悬臂式探针的传输效率随光纤圆锥角的变化关系，作出传输效率曲线，理论分析和实验测量相吻合。     

SFM/SNOM结合的扫描探测显微镜

采用光纤探针的扫描近场光学显微镜 (SNOM)存在某些弱点 ,如探针特别脆 ,不易贴近样品表面扫描 ,探针的转输效率低等。近年来发展了将SFM /SNOM结合起来的扫描探测显微镜。利用微加工工艺技术 ,将小孔集成在悬臂探针中 ,使探针既能批量制备 ,又具有很好的重复性。探针悬臂在垂直于样品表面方向上的弹性常数较小 ,针尖不易损坏。在接触模式中利用这种SFM /SNOM组合探针可将样品的形貌像、摩擦力和光学透射像等信息同时记录下来。对于综合研究样品表面的介观性质十分有利。     

高效、高分辨光纤微探针的制备及检验

提出两种同时满足高分辨、高传光效率的探针模型以及制备方法 :先用自制热拉装置将光纤拉制成过渡区为双曲线或抛物线形的探针 ,然后用 4 0 %氢氟酸进行快速腐蚀 ,使探针孔径变小而保持过渡区域形状和锥度基本不变。所获探针孔径变化范围为 2 0～ 2 0 0 nm,锥度 2 0°～ 6 0°。为检验探针性能 ,将两种探针的出射光分布与用传统热拉法所得到探针进行对比 ;探测了光子扫描隧道显微镜状态下的倏逝波衰减曲线 ;给出了用集光式扫描近场光学显微镜得到的近场光学图像 ;同时 ,验证了探针对剪切力控制的适用性。     

内窥式二维光纤扫描探头及其驱动方法

基于压电换能器技术设计了一种应用于光学相干层析成像的新型内窥式二维光纤扫描探头,即利用两片压电陶瓷片和一片薄导电基片驱动光纤探头.该探头利用光纤悬臂的共振特性,通过对压电陶瓷施加等于光纤共振频率的混频信号,能同时激发光纤悬臂两正交方向上的振动,可以实现光纤悬臂的二维扫描.建立了理论模型并进行了有限元仿真分析,最后搭建了...     

内窥式二维光纤扫描探头及其驱动方法

基于压电换能器技术设计了一种应用于光学相干层析成像的新型内窥式二维光纤扫描探头,即利用两片压电陶瓷片和一片薄导电基片驱动光纤探头.该探头利用光纤悬臂的共振特性,通过对压电陶瓷施加等于光纤共振频率的混频信号,能同时激发光纤悬臂两正交方向上的振动,可以实现光纤悬臂的二维扫描.建立了理论模型并进行了有限元仿真分析,最后搭建了实验系统,验证并获得了扫描图样.实验结果实现了光纤悬臂的二维扫描,扫描范围达到(500×500)μm,调节驱动信号振幅幅值可以调节扫描范围.实验结果与理论分析和仿真相吻合,验证了方案的可行性.     

大孔柚子型微结构光纤探针的表面增强拉曼散射性能研究

随着光纤制备工艺以及纳米材料制备技术的发展,光纤探针已成为一种新型的表面增强拉曼散射(SERS)基底,通过在普通单模光纤或多模光纤上制备不同的结构并修饰相应的纳米材料,可以得到多种类型的光纤表面增强拉曼散射探针,并实现较好的检测效果。但受限于光纤本身的结构,普通光纤仅能利用端面或侧表面提供拉曼检测的“热点”区域,限制了其SERS性能的进一步提高。因此制备了大孔柚子型微结构光纤(MSF)表面增强拉曼散射(SERS)探针,其中大孔柚子型MSF SERS探针结构通过一段阶跃多模光纤与柚子型微结构光纤熔接制得。实验分别对自制的纳米银溶胶基底以及大孔柚子型MSF SERS探针的SERS性能进行检测。采用溶胶自组装法制备负载银纳米颗粒的MSF SERS探针,通过控制自组装时间制备不同光纤SERS探针(Ag/MSF-x,其中x为自组装时间,分别为15、 30、 45、 60 min)。采用溶液检测方法,利用Ag/MSF-x探针对10^-3 mol·L^-1的亚甲基蓝(MB)探针分子进行检测,通过比较相同条件下的增强效果筛选得到Ag/MSF-45探针。为进一步检...     

蓝宝石光纤探针传感器探针研制工艺及传光测试

在分析比较传统光纤探针研制工艺特点的基础上认为其不适用于蓝宝石光纤,因此提出了基于研磨抛光系统的光纤探针制备工艺。介绍了研磨系统的组成及运作方式,阐述了光纤探针制备过程中研磨抛光与固化的主要流程。最后使用光学仿真软件Zemax进行了光纤探针传输效率的仿真测试,仿真结果表明采用940nm波段光源及"面对面"探头安置方式时光纤探针传输效率最高。可应用于蓝宝石光纤探针传感器系统的搭建。     

光学针描法的理论与实验研究

在光纤探针描描使表面轮廓对光产生调的基础上提出了光学针找法的粗糙度测量技术。对光学针描法的理论基础，如表面轮廓原理和光耦合区理论进行限较为深入的分析。对单模光纤探针式轮廓仪的实验系统进行了介绍，最后给出了实验结果和误差分析。     

基于光纤镀膜探针的固体介质中应力波粒子速度测量技术

粒子速度是分析固体介质中应力波传播规律的一个重要参数。结合激光多普勒效应和全光纤干涉测速系统,提出了一种基于光纤镀膜探针的固体介质中应力波粒子速度的测量方法。将光纤镀膜探针嵌入有机玻璃（PMMA）中,距爆心同一半径处,采用0.125 g TNT当量的微型炸药球作为爆炸源,进行填实爆炸产生应力波,通过采集光纤探针端面的运动信息,基于短时傅里叶变换的时频分析方法,解调出端面运动速度,进而反推出粒子速度。实验结果表明：不同光纤镀膜探针测得的速度分别为22.648 m/s、23.505 m/s,将反推的粒子速度与传统的圆环型电磁粒子速度计方法获取到的数据进行对比,两者的相对偏差低于5.00%,验证了光纤镀膜探针测量固体介质中应力波粒子速度的可行性。     

基于倏逝波的光纤生物传感器研究

构建了一种以光纤束作为激发光信号和荧光信号传输通道的光纤生物传感器结构.根据光纤探针的倏逝波理论和模式匹配理论对光纤探针的几何形状进行了设计,制作了数组光纤探针并根据需要对其中一部分进行荧光标记.选择了光纤探针置于空气中和水溶液中两种情况,对光纤传感器系统进行了信号检测实验,对比标记了的和未标记的相同几何结构参数的光纤探针两者在系统中被探测的信号差异.从二者的差别区分出系统所探测的倏逝波激发的荧光信号,证明了该光纤传感器系统的可行性.     

Scanning near-field optical/atomic force microscopy for fluorescence imaging and spectroscopy of biomaterials in air and liquid: Observation of recombinantEscherichia coli with gene coding to green fluorescent protein

We have developed a system of scanning near-field optical/atomic force microscopy (SNOM/AFM) for fluorescence imaging and spectroscopy of biomaterials in air and liquid. SNOM/AFM uses a bent optical fiber simultaneously as a dynamic force AFM cantilever and a SNOM probe. Optical resolution of SNOM images shows about 50 nm in an illumination mode for a standard sample of a patterned chromium layer of 20 nm thickness on a quartz glass plate. The SNOM/AFM system contains a photon counting system and polychrometer/ICCD (intensified charge coupled device) system for observation of the fluorescence image and spectrograph of micro areas, respectively. The gene coding to green fluorescence protein (GFP) was cloned in recombinantEscherichia coli (E. coli). Topography, fluorescence image and spectrograph of recombinantE. coli by SNOM/AFM showed a difference in fluorescence in individualE. coli. Fluorescence activity of GFP can thus be used as a convenient indicator of transformation. SNOM/AFM is also applicable to observe immobilizedE. coli on a glass plate in water with a liquid chamber and may allow the viewing of observation of floating organisms.     

Scanning probe microscope with interchangeable AFM-FFM and STM heads

Summary A scanning probe microscope operating in air with interchangeable atomic force-friction force (AFM-FFM) and electronic-tunnelling (STM) heads is presented. Our AFM operates in the so-called contact mode and utilizes the optical-lever detection method which allows simultaneous measurement of the topography as well as the lateral force. The set-up also contains an optical microscope to control both the sample and the probe laser spot on the cantilever. The experimental method to change from AFM to STM operation is based on the use of the probe laser beam and the optical microscope. The maximum scanning area is (24×24) μm² and it is well embraced in the optical-microscope visual field. The microscope attains atomic resolution in air in both AFM and STM configuration. Its performance is demonstrated on the surface of different samples. In honour of Prof. Fausto Fumi on the occasion of his retirement from teaching.     

Observations of fission-tracks in zircons by atomic force microscope

The fission-track (FT) method is a dating technique based on the observation of damage (tracks) by spontaneous fission of ²³⁸U left in a mineral. The date is calculated from the track density and the uranium concentration in the mineral. This is possible because the number of tracks is a function of uranium concentration and time since the start of track accumulation. Usually, the number of tracks is counted under an optical microscope after etching (chemical expansion of a track). However, as FT density per unit area rises, it becomes difficult to count the number of tracks. This is due to the fact that FTs overlap one another and are unable to be readily distinguished. This research examines the potential of atomic force microscope (AFM) for FT dating using zircons, which are likely to show higher FT density than other minerals due to their high U concentrations.To obtain an AFM image for a sample prepared for FT dating, removing the static electricity of the sample is essential to avoid an unexpected movement of the cantilever. A grain should be wider than about 30 μm to bring the cantilever on the mineral surface. Polishing with a fine grained compound is very important. There is not much difference in sharpness between images by AC mode (scanning with vibrating cantilever at a constant cycle) and Contact mode (scanning with the cantilever always in close contact with the surface). To confirm how tracks can be identified with the AFM, an AFM image was compared with an image obtained with the optical microscope. When change in the number of tracks and their shapes were observed through stepwise etching, the track expanded as the etching time increased. In addition, the etching rate was slower for large tracks than those for small tracks. This implied that the AFM can be used to observe etching of zircons with different degrees of nuclear fission damage. A track that could not be seen with the optical microscope due to insufficient etching could be observed by AFM methods, indicating the possibility of FT dating with high track densities using AFM after relatively short etching periods.     

Two-dimensional scanning probe driven by a solenoid-based single actuator for optical coherence tomography

We propose the two-dimensional scanning probe operating with a single actuator, which is thought useful as a sample probe for optical coherence tomography (OCT). The probe was designed to use a single-body lensed fiber cantilever loaded with an iron-bead and driven by a single-solenoid actuator. Elliptic spiral trace patterns were achieved using off-axis magnetic fields of the solenoid. A three-dimensional OCT image was obtained for a scanning area of 3.8 mm × 3.4 mm at an acquisition speed of 16.7 s/V. Up to 27 Hz B-scan rate, the proposed probe worked well, and 1000 A-scans were made per each B-scan.     

原子力显微镜探针悬臂几何结构变化对高次谐波信息增强的研究

轻敲模式原子力显微镜高次谐波信号包含待测样品表面纳米力学特性等方面的信息, 但是传统原子力显微镜的高次谐波信号非常微弱. 里兹法证明在探针悬臂的特定位置打孔可以实现探针的内共振从而增强高次谐波信号强度. 本文通过有限元仿真计算获得探针第一共振频、第二共振频及其比值随着孔的尺寸和位置变化的规律. 在实验上通过聚焦离子束在探针悬臂上打孔使其第二共振频约为第一共振频的6倍, 提高了第6次谐波信号的信噪比, 并在实验室研制的高次谐波成像实验装置上获得了6次谐波图像. 关键词： 轻敲模式原子力显微镜 探针悬臂几何结构 高次谐波 聚焦离子束加工     

原子力显微镜探针耦合变形下的微观扫描力研究

原子力显微镜(AFM)的微探针系统是典型的微机械构件，它在接触扫描过程处于耦合变形状态.采用数值模拟方法探究恒力模式下探针耦合变形对微观扫描力信号、微观形貌信号的影响.研究表明，AFM的恒力模式扫描中，法向扫描力并不是恒定大小，与轴向扫描力存在耦合作用，在粗糙峰峰值增加阶段，二力均增加；在粗糙峰峰值减小阶段，二力均减小；该耦合作用随形貌坡度、针尖长度等增加而加强.微观形貌的测试信号和横向扫描侧向力信号受探针耦合变形影响较小，但侧向力与形貌斜率密切相关，且其极值点与形貌极值点存在位置偏差，这些结果均与原子力 关键词： 原子力显微镜 探针悬臂梁 耦合变形 扫描力     

基于扫描电子显微镜的碳纳米管拾取操作方法研究

碳纳米管场效应管是未来纳米器件的发展方向,而制造纳米器件的前提是拾取碳纳米管,基于扫描电子显微镜(SEM)的微纳机器人操作系统能够实现碳纳米管拾取操作.本文建立拾取操作中碳纳米管与原子力显微镜(AFM)探针间范德瓦耳斯力力学模型,不同接触状态下范德瓦耳斯力越大越有利于拾取碳纳米管.在SEM视觉反馈图像中建立相对坐标系,首先提出倾角变值方法检测碳纳米管与AFM探针的接触状态,然后运用动态差值方法识别碳纳米管与AFM探针空间位姿并校正碳纳米管位姿,最后自下而上拾取碳纳米管.实验结果表明:拟合直线倾角变值较大时碳纳米管与AFM探针发生接触,动态差值变化为零时碳纳米管与AFM探针为空间线接触,在完全线接触模型下选择合适的接触角度、接触长度和拾取速度能够成功拾取碳纳米管.