Experiment and modeling of a small-scale,supersonic chemical oxygen-iodine laser

We report on detailed experiment and modeling of a small-scale, supersonic chemical oxygen-iodine laser. The laser has a 5 cm long active medium and utilizes a simple sparger-type O₂(¹ ) chemical generator and a medium-size pumping system. A grid nozzle is used for iodine injection and supersonic expansion. 25 W of cw laser emission at 1.315 µm are obtained in the present experiments. The small size and the simple structure of the laser system and its stable operation for long times make it a convenient tool for studying parameters important for high-power supersonic iodine lasers and for comparison to model calculations. The lasing power is studied as a function of the molar flow rates of the various reagents, and conditions are found for optimal operation. Good agreement is found between the experimental results and calculations based on a simple one-dimensional semi-empirical model, previously developed in our laboratory and modified in the present work. The model is used to predict optimal values for parameters affecting the laser performance that are difficult to examine in the present experimental system.     

Model for laser-induced thermal degradation and ablation of polymers

Ablation of organic polymers is described on the basis of photothermal bond breaking within the bulk material. Here, we assume a first-order chemical reaction, which can be described by an Arrhenius law. Ablation starts when the density of broken bonds at the surface reaches a certain critical value. In order to understand the ablation behavior near the threshold fluence, φ_th, non-stationary regimes must be considered. The present treatment reveals several qualitative differences with respect to models that treat ablation as a surface process: (i) Ablation starts sharply with a front velocity that has its maximum value just after the onset. (ii) The transition to the quasi-stationary ablation regime is faster. (iii) Near threshold, the ablated depth h has a square-root dependence on laser fluence, i.e., h∝(φ-φ_th)^1/2. The ablation velocity is very high even near φ_th. (iv) With φ≈φ_th ablation starts well after the laser pulse. (v) The depletion of species is responsible for the Arrhenius tail observed with fluences φ≤φ_th. (vi) Residual modification of material has maximum near the threshold. (vii) Stationary regimes of ablation demonstrate change of effective activation energy with laser intensity. The model calculations are applied to Polyimide (Kapton^TM H). Here, differences in single-pulse ablated depth determined from mass loss and profilometry should be about 10 nm. Received: 16 February 1999 / Accepted: 18 February 1999 / Published online: 28 April 1999     

Femtosecond laser-induced formation of spikes on silicon

We find that silicon surfaces develop arrays of sharp conical spikes when irradiated with 500-fs laser pulses in SF₆. The height of the spikes decreases with increasing pulse duration or decreasing laser fluence, and scales nonlinearly with the average separation between spikes. The spikes have the same crystallographic orientation as bulk silicon and always point along the incident direction of laser pulses. The base of the spikes has an asymmetric shape and its orientation is determined by the laser polarization. Our data suggest that both laser ablation and laser-induced chemical etching of silicon are involved in the formation of the spikes. Received: 10 September 1999 / Accepted: 7 January 2000 / Published online: 8 March 2000     

Capacitance humidity sensor with carbon nitride detecting element

The humidity sensitive properties of carbon nitride (CN_x) films deposited by two methods, inductively coupled plasma chemical vapour deposition utilizing transport reactions and pulsed laser deposition combined with an rf discharge, have been investigated. For this purpose capacitance humidity sensors with a CN_x detecting element have been fabricated and tested. Fast and significant responses toward moisture are registered by the changes of the electrical parameters. The CN_x films sensing mechanism has been discussed. The results obtained show unambiguously that CN_x films appear to be a promising candidate as a humidity sensitive element in up-to-date electronic noses. Received: 6 December 1999 / Accepted: 7 January 2000 / Published online: 24 March 2000     

Bragg spectroscopy and superradiant Rayleigh scattering in a Bose–Einstein condensate

Two sets of studies concerning the interaction of off-resonant light with a sodium Bose–Einstein condensate are described. In the first set, properties of a Bose–Einstein condensate were studied using Bragg spectroscopy. The high momentum and energy resolution of this method allowed a spectroscopic measurement of the mean-field energy and of the intrinsic momentum distribution of the condensate. Depending on the momentum transfer, both the phonon regime as well as the free-particle regime could be explored. In the second set of studies, the cigar-shaped condensate was exposed to a single off-resonant laser beam and highly directional scattering of light and atoms was observed. This collective light scattering was caused by the long coherence time of the quasi-particles in the condensate and resulted in a new form of matter wave amplification. Received: 26 June 1999 / Revised version: 21 September 1999 / Published online: 10 November 1999     

cw dual-wavelength operation of a diode-end-pumped Nd:YVO4 laser

A dual-wavelength continuous wave (cw) diode-end-pumped Nd:YVO₄ laser that generates simultaneous laser action at the wavelengths 1064 nm and 1342 nm is demonstrated. The optimum oscillation condition for the simultaneous dual-wavelength operation in a diode-end-pumped solid-state laser has been derived. The relationship between the laser cavity and the output stability is also studied. Experimental results show that the stability of the output power at the two wavelengths could be enhanced by use of a three-mirror cavity. Received: 26 August 1999 / Revised version: 11 October 1999 / Published online: 23 February 2000     

Intracavity frequency-tripling of actively mode-locked diode-pumped Nd:YAG laser

We report the first diode-pumped solid-state laser operating in cw-mode-locked regime and simultaneously achieving intracavity frequency-tripling. This laser provide UV picosecond pulses (λ=355 nm) of 10 ps duration with 0.5 mW average power at 150 MHz repetition rate. A different set of adjustments gave rise to a Q-switched mode-locked regime. Trains of hundred UV pulses of 60 ps duration and 4 W peak power were produced in this latter case at 50 kHz repetition rate. Received: 12 October 1998 / Revised version: 12 December 1998 / Published online: 26 May 1999     

Pulsed blue-light generation by the frequency doubling of the 4F3/2 to 4I9/2 transition in Nd:YAG and Nd:YAlO3

We report on the frequency doubling of Q-switchedNd:YAG and Nd:YAlO₃ lasers emitting at 946 and 930 nm, respectively (⁴F_3/2 to ⁴I_9/2 transition). The neodymium-doped laser host crystals were excited with a flashlamp-pumped Cr:LiSAF laser operating in a free-running mode. Blue-light pulses were obtained at both 473 nm (9 mJ, 25 ns FWHM) and 465 nm (4.4 mJ, 35 ns FWHM) by using a potassium niobate crystal as an extra-cavity frequency doubler. The second-harmonic generation conversion efficiencies reached 53% and 31%, respectively. Received: 23 June 1999 / Revised version: 8 August 1999 / Published online: 3 November 1999     

On the performance of an ArF and a KrF laser as a function of the preionisation timing and the excitation mode

An X-ray preionised ArF and KrF excimer laser has been studied with three different spiker-sustainer excitation circuits. We observed large differences in the laser performance, when the preionisation delay timing was varied on a nanosecond timescale. The behaviour of both lasers was found to be equivalent. The observations can be understood by considering the effect of the discharge excitation technique on the preionisation process. An excitation mode with a prepulse well above the steady-state voltage V_SS with a subsequent reversed overshoot voltage for initiating the discharge, in combination with a well-timed preionisation pulse is found to give the best results. Optimum output energies of 50 mJ with ArF and 175 mJ with KrF were obtained from an active volume of 60×1.5×1.2 cm in the so-called swing mode, with the preionisation applied 60 ns before the discharge breakdown. Received: 23 February 1999 / Revised version: 4 June 1999 / Published online: 16 September 1999     

Supersonic CO2 laser excited by RF discharge in closed cycle

A supersonic gas flow having a Mach number of 2 has been realized in a closed-cycle radio-frequency (RF)-discharge-excited supersonic CO₂ laser system. Stable RF discharge at a high CO₂ gas concentration has become possible using supersonic gas flow and RF discharge generated between dielectric electrodes. As a result, high RF input power density has been obtained. In addition, a high small-signal gain has been obtained in the supersonic section through decreases in gas pressure and gas temperature due to supersonic gas flow.This revised version was published online in August 2005 with a corrected cover date.     

A small scale, supersonic chemical oxygen-iodine laser

A supersonic chemical oxygen-iodine laser of 5 cm long active medium has been operated utilizing a simple sparger-type O₂(¹Δ) chemical generator and a medium size pumping system. A grid nozzle was used for iodine injection and supersonic expansion. 9 W of cw laser emission at 1315 nm were obtained in the present experiments. The small size and the simple structure of the laser system and its stable operation for long periods make it a convenient tool for studying parameters important for high-power supersonic iodine lasers.     

Processing of micro-particles by UV laser irradiation in a field cage

An electric cage-laser micro-turning lathe was realised and applied to contact-free handling and mechanical processing of micro particles. Since particles with diameters of several micrometers cannot be fixed in mechanical chucks, an octode field cage was used to trap and rotate a single particle in a fluid without any mechanical surface contact. A pulsed nitrogen laser of high beam quality focused to about 1 μm in diameter could be adjusted independently of the cage position. The trapping forces (negative dielectrophoresis) acting on a bead of 5 to 15 μm are up to several hundred pN. This and the surrounding fluid damp down the effect of the laser pulses during bead processing. Examples demonstrating the possibilities of this technique are shown. Microsystems with high optical quality were fabricated photolithographically or by laser direct-write chemical vapor deposition (LCVD). Technical and biotechnological applications are discussed. Received: 20 October 1999 / Accepted: 27 October 1999 / Published online: 10 November 1999     

Influence of the growth conditions on the composition of Al nitride films by laser ablation

We have studied the growth of Al nitride films by laser ablation in order to check the potential of the method. The influence of process parameters such as nature of the target, laser energy density, nitrogen partial pressure, etc. on the composition, chemical nature and structure of the films has been investigated. Rutherford backscattering spectrometry, nuclear reaction analysis, X-ray diffraction and X-ray photoelectron spectroscopy were used to characterize the films. Literature reports on AlN film growth by laser ablation but oxygen contamination is poorly discussed whereas it is the main problem encountered. The origin of this contamination and the mechanisms of incorporation were studied, and the crucial parameter was found to be the residual pressure during ablation. Due to the difference in chemical reactivity between oxygen and nitrogen atomic species, to obtain pure AlN films it is necessary to increase the concentration of atomic nitrogen. Thus, a RF discharge device was added allowing a better nitrogen molecule dissociation. Finally, despite composition deviations, the AlN phase can be formed in the laser-deposited films. Highly textured films presenting epitaxial relationships with crystalline Al₂O₃ substrates can be grown even with a 10% oxygen concentration. Received: 7 October 1999 / Accepted: 17 April 2000 / Published online: 13 September 2000     

Effects of laser pulsewidth on higher-order harmonic generation in the barrier-suppression-ionization intensity regime

We studied the highest harmonic photon energies of high-order harmonic generation (HHG) for He, Ne, Ar, Kr, Xe, and N₂. This research employed 65-fs and 150-fs Ti:sapphire laser pulses, of which the peak intensities in a vacuum are higher than the barrier-suppression-ionization (BSI) intensities. We fitted two analytical formulae to the experimental results of HHG. One formula, which was obtained by fitting an analytical formula to the results by a quantum mechanical simulation of HHG, expresses the highest interaction intensity by a function of the BSI intensity and the Keldysh γ-parameter. The other formula is derived by introducing the saturation intensity of HHG, which was proposed by Chang et al. [Phys. Rev. Lett. 79, 2967 (1997)]. We discuss the highest interaction intensity for the condition when the peak laser intensities are higher than the BSI intensities. Received: 19 March 1999 / Revised version: 13 August 1999 / Published online: 27 October 1999     

Collisional effects on the collective laser cooling . of trapped bosonic gases

We analyse the effects of atom–atom collisions on a collective laser cooling scheme. We derive a quantum master equation which describes the laser cooling in presence of atom–atom collisions in the weak-condensation regime. Using such equation, we perform Monte Carlo simulations of the population dynamics in one and three dimensions. We observe that the ground-state laser-induced condensation is maintained in the presence of collisions. Laser cooling causes a transition from a Bose–Einstein distribution describing collisionally induced equilibrium, to a distribution with an effective zero temperature. We analyse also the effects of atom–atom collisions on the cooling into an excited state of the trap. Received: 18 June 1999 / Revised version: 24 September 1999 / Published online: 10 November 1999     

Development and characterization of Yb-Er laser glass for high average power laser diode pumping

A new strong erbium laser glass (SELG) based on a boro-alumo-phosphate composition is reported. We discuss the synthesis and chemical properties together with spectroscopic and thermo-mechanical data. The new glass composition shows excellent laser performance and withstands high-average power pump radiation. We present laser results at 1.54 μm from flashlamp and laser pumping. In tests with laser-diode pumped Q-switched Er-Yb microchip lasers, we have achieved up to 150 mW of average output power and generated 1.2 kW in peak power. Co²⁺:MgAl₂O₄ was here used as the saturable absorber. Received: 21 December 2001 / Revised version: 14 April 2002 / Published online: 8 August 2002     

Yellow luminescence from precipitates in GaN epilayers

In this work, the excimer-laser-induced crystallization of a-Si films on SiO₂ was investigated using a long-pulse-duration (200 ns) XeCl source. The microstructural analysis of the laser-irradiated area, for incident energy densities comprised between the thresholds corresponding to the surface and full melting, respectively, of the Si layer, was performed by scanning electron microscopy and Raman spectroscopy. A super-lateral-growth regime was evidenced quite comparable to that which occurs when classical excimer laser pulses of short duration (≈20 ns) are used. A numerical simulation of the surface melt dynamics was also performed and compared to the experimental observations. Received: 8 February 1999 / Accepted: 15 February 1999 / Published online: 5 May 1999     

Slope efficiency of up to 73% for Yb:Ca4YO(BO3)3 crystal laser pumped by a laser diode

Yb:Ca₄YO(BO₃)₃ (Yb:YCOB) crystal with good quality and large size has been grown by the Czochralski method. The polarization absorption and fluorescence spectra have been measured. The laser action of the Yb:YCOB crystal has been demonstrated when it is pumped by a fiber-coupled laser diode (LD) at the wavelength of 976.4 nm. The pumping threshold is 55 mW, the light-light conversion efficiency is 58.7%, and a slope efficiency of up to 73% is thus calculated. Received: 16 December 1998 / Revised version: 4 February 1999 / Published online: 7 April 1999     

Laser oscillation by the F3− and F2− color centers in LiF crystal at room temperature

A stable, free-running LiF:F₃ ⁻ and LiF:F₂ ⁻ color center laser oscillation is achieved at room temperature by pumping with the 930-nm laser radiation. The LiF:F₃ ⁻ laser radiation has a peak at 1100 nm and shifts from the peak wavelength of the F₃ ⁻ luminescence band because of the absorption of the F₃ ⁻ luminescence by the F₂ ⁻ center, which co-exists with the F₃ ⁻ center. Received: 2 March 1999 / Revised version: 16 March 1999 / Published online: 12 May 1999