金属纳米颗粒等离激元共振增强非线性介质谐波的发展现状

随着纳米加工和制备技术的不断发展,金属纳米粒子的等离激元光学特性已得到了广泛的研究与应用。本文基于金属纳米颗粒等离激元共振特性,分析了金属纳米颗粒等离激元共振对介质谐波的增强机制,综述了该增强机制在近几年所取得的最新研究成果及其在生物成像领域的应用。金属纳米颗粒等离激元共振在增强介质非线性特性领域的发展趋势是从简单的金属纳米颗粒向复杂形状纳米颗粒和金属纳米颗粒组装体的发展,这些新型金属纳米颗粒在非线性光学、生物医学上的疾病诊断和治疗有良好的实际应用前景。     

Synthesis of low-melting-point metallic nanoparticles with an ultrasonic nanoemulsion method

A one-step, economical nanoemulsion method has been introduced to synthesize low-melting-point metallic nanoparticles. This nanoemulsion technique exploits the extremely high shear rates generated by the ultrasonic agitation and the relatively large viscosity of the continuous phase - polyalphaolefin (PAO), to rupture the molten metal down to diameter below 100 nm. Field’s metal nanoparticles and Indium nanoparticles of respective average diameters of 15 nm and 30 nm have been obtained. The nanoparticles size and shape are determined by transmission electron microscopy (TEM). Their phase transition behavior is examined using a differential scanning calorimeter (DSC). It is found that these nanoparticles dispersed in PAO can undergo reversible, melting-freezing phase transition, and exhibit a relatively large hysteresis. The experimental results suggest that the nanoemulsion method is a viable route for mass production of low-melting nanoparticles.     

Hot electrons and laser optoacoustics in metal nanoparticles

The theory of sound generation and heat transfer in matrix-embedded metal nanoparticles under ultra-short laser irradiation has been developed. The shape and time dependence of acoustic waves generated by a sharp change in the pressure of electrons have been investigated for a single nanoparticle and for the group of nanoparticles located on a 2-D flat matrix plane. The dependence of the electronic temperature and the temperature of the interface between the dielectric matrix and nanoparticle as a function of time has been derived.     

新型膜状金纳米活性基底的制备及拉曼光谱增强研究

贵金属纳米粒子作为增强基底已经广泛应用于表面增强拉曼光谱(SERS)研究，传统的贵金属纳米基底在制备方法、增强能力、准确性等方面仍有待改进和提高。采用一种简易、高效的方法制备出了一种具有膜状结构的新型金纳米增强基底：以聚乙烯吡咯烷酮(PVP)作保护剂和粘结剂，通过化学还原法制备金纳米基底。实验考察了还原剂种类、反应温度、体系pH和柠檬酸钠浓度对反应的影响，制备出增强效果最佳的新型膜状金纳米基底。利用罗丹明B作为探针分子，考察基底的SERS特征，其增强因子可达6.5×105。利用扫描电镜(SEM)对纳米粒子的结构进行了表征，结果表明其具有膜状结构，且比表面积大，利于分子的吸附。相比于传统的贵金属纳米基底，该实验所制备的新型膜状金纳米基底增强效果更佳、灵敏度和准确度更高，具有很大的应用前景。     

Size and Shape Effect of Gold Nanoparticles in “Far‐Field” Surface Plasmon Resonance

The “far‐field” surface plasmon resonance (FSPR) of metal nanoparticles, which have built a facile way to emission enhancement of red, green, blue, and white with nice reproducibility, has big potential application in solution‐processed organic light‐emitting diodes (OLEDs). According to the theory of the “far‐field” effect, the reflectivity of the metal surface and the phase shift at the reflection play an important role in enhancing ratio, which strongly relate to the size and shape of nanoparticles. In this work, gold nanospheres with different sizes and nanorods are synthesized in order to determine the size and shape effect of FSPR. The results demonstrate that the one with higher reflectivity in a certain range induces a better emission enhancement in the luminous efficiency and the maximum brightness. The nanoparticles with bigger sizes and shape of rods have higher reflectivity, which is consistent with the simulation based on FSPR effect. The phase shifts of different nanoparticles are optimized by the distance between gold nanoparticles and emitters. The metal NPs with a high reflectivity and the applicable phase shift will have big potential for the emission enhancement in OLEDs.     

金属纳米颗粒LSPR光纤生物传感DDA方法研究

研究了金属纳米颗粒的局部表面等离子体共振(LSPR)行为,并讨论了其在光纤生物传感领域的应用.采用离散偶极近似(DDA)的方法,从理论上分析了金属纳米颗粒的尺寸、形状对其传感灵敏度的影响.计算结果显示,金属纳米颗粒的等离子共振吸收峰同时受到颗粒尺寸和形状的影响,但形状对其传感灵敏度的影响最为明显,计算结果与实验数据能较好地吻合.     

Theory of spectral hole burning for the study of ultrafast electron dynamics in metal nanoparticles

In order to study the ultrafast relaxation dynamics of surface plasmon excitation in metal nanoparticles in the presence of inhomogeneous line broadening and investigate the influence of the reduced dimensions on the dephasing time T₂ in the size regime below about 10 nm, we have recently demonstrated a novel technique based on persistent spectral hole burning [1]. Here, we describe a theoretical model that has been developed for evaluation of the experimental data and precise determination of T₂ for particles of different size and shape. Comparison of the model to experimental data for Ag nanoparticles on sapphire shows that the theoretical treatment does not only reproduce the shape of the generated holes but also the dependence of their widths on the applied laser fluence. As a result, we have a reliable and versatile tool at hand making possible systematic studies of the ultrafast electron dynamics in small metal particles, and the dependence of the femtosecond dephasing time on their size, shape and surrounding dielectric. Received: 12 September 2001 / Published online: 15 October 2001     

Correlation between the morphological characteristics and extinction spectra of sodium nanoparticles and modification of nanoparticles through photoatomic emission

The morphological characteristics of ensembles of metal nanoparticles on transparent dielectric substrates have been studied by the methods of hole-burning and linear absorption spectroscopy. The size and shape of particles were changed under the exposure to the optical radiation that induced photodetachment of atoms and their photostimulated diffusion over the surface of nanoparticles. The correlation between holes burned in different absorption bands is explained by the morphological features of the island film. The relaxation times of individual modes of collective plasma oscillations and the shape parameters of particles modeled by three-axial ellipsoids have been determined.     

Laser-induced growth and reformation of gold and silver nanoparticles

The sizes, shapes, and growth rates of gold and silver nanoparticles stabilized with polyvinylpyrrolidone in water can be controlled by using picosecond laser pulses. The nucleation of small metal clusters formed with NaBH₄ addition to produce nanoparticles takes two months with aging but 30 min with laser irradiation. Laser pulses can also induce nanoparticles to have narrow size and shape distribution or to undergo aggregation into much larger particles. The latter process is more likely found when the metal is silver or the irradiation wavelength is short. Laser-induced growth and shape transformation processes are explained in terms of BH₄ ⁻ depletion, metal fusion, and electron ejection followed by disintegration.