Formation of a bistructure of a solid in a computer experiment

Molecular-dynamics was used to investigate the structural changes occurring in a three-dimensional solid when the solid is transferred from an amorphous into a crystalline state. Crystal cells of a new type — pentadecahedrons with five square lateral faces and ten regular triangular faces at the vertices of a cell — were found for the first time in a computer experiment. It is shown that a bistructure consisting of crystal cells of different types, including cells with five-fold symmetry axes, are stable in the solid. Fiz. Tverd. Tela (St. Petersburg) 40, 1919–1924 (October 1998)     

Instability of a flat horizontal interface between a thin layer of a ferrofluid and a thin layer of a nonmagnetic liquid in the presence of a vertical magnetic field

An asymptotic analysis of the equations and boundary conditions of fluid dynamics is performed, and a nonlinear model is constructed for the onset of the development of Rosensweig instability in a thin horizontal ferrofluid layer at rest covered with a thin layer of a lighter nonmagnetic liquid. The surface of a nonmagnetized slab is the lower boundary of the ferrofluid, and the interface with a gas is the upper boundary of the nonmagnetic liquid. The pressure in the gas is constant. The instability being considered arises upon the application of a rather strong uniform vertical magnetic field. The proposed model involves five dimensionless parameters. The critical magnetization of the initial ferrofluid layer with a flat upper boundary and the threshold wave number are found. The effect of the governing parameters on the instability region and on the wavelength of the fastest growing mode is studied in the linear formulation of the problem.     

Design of a suspension of a training sulky

A design study based on a modelling approach was used to optimise the characteristics of a new concept of suspension for training sulkies. The numerical model of sulky including the suspension and, in a second stage, a mechanical model of driver, allowed the definition of technical specifications. They were used to manufacture a prototype of suspension mounted on a current production model of sulky. The prototype of suspension was then tested in the lab and in a racecourse in real conditions of use.The resulting vibration exposure was assessed from vibration measurements. It was slightly lower than the limit value enacted in the European Vibration directive (1.15 m s²), but drastically reduced in comparison with the exposure measured on the original sulky (2.56 m s²). The prototype and moreover the design procedure is currently in a transfer process towards sulky manufacturers.     

Behavior of a free surface of a magnetic fluid containing a magnetizable cylinder

The deformation of the free surface of a magnetic fluid containing a cylinder made of a magnetizable material subjected to a uniform applied magnetic field is analyzed. The statics and dynamics of a magnetic fluid free surface is studied theoretically and experimentally. A discontinuous (jump-like) change of the surface shape is shown to occur when the applied magnetic field gradually increases or decreases. If the applied magnetic field increases and then decreases, a hysteresis of the shape is observed.     

Determination of a response function of a thermocouple using a short acoustic pulse

This paper reports on an experimental technique to determine a response function of a thermocouple using a short acoustic pulse wave. A pulse of 10 ms is generated in a tube filled with 1 bar helium gas. The temperature is measured using the thermocouple. The reference temperature is deduced from the measured pressure on the basis of a laminar oscillating flow theory. The response function of the thermocouple is obtained as a function of frequency below 50 Hz through a comparison between the measured and reference temperatures.     

Application of a reflector with a nonuniform field in a mass-reflectron

The conditions under which the nonuniform compensating field of the reflector of the mass-reflectron can be generated with an acceptable accuracy at the symmetry axis of the reflector and extrapolated to the radial neighborhood of the axial line are determined. The plots that illustrate the distribution of the calculated nonuniform field of the reflector, the possibilities for implementation, and errors of focusing with respect to time of flight in the radial neighborhood are presented. Analytical expressions for the calculation of the time of flight of ions in the reflector in which the field distribution is described using a power series and analytical expressions for the calculation of the field distribution in the reflector in which the time of flight is determined using a power series are derived. A method for the analytical calculation of the compensating nonuniform field of the reflector based on the given dependence of the time of flight in the absence of such a field is proposed using a solution to the Abel integral equation. The solution to this equation yields analytical expressions for the calculation of the compensating field of the reflector in mass-reflectrons that contain the zero-field drift space and regions of acceleration (deceleration) of ions with a uniform field.     

Rigorous solution of a problem for a cylindrical cavity containing a ferrite and a dielectric

A rigorous solution is given for modes of TM_nmo type. The complex resonant frequency _n is expressed via a transcendental characteristic equation. Some particular cases are discussed.Read at the Third All-Union Conference on Ferrites, Leningrad, 23 October 1963.     

Vibration analysis of a wheel composed of a ring and a wheel-plate modelled as a three-parameter elastic foundation

The free in-plane vibrations of circular rings with wheel-plates as generalised elastic foundations are studied using analytical methods and numerical simulations. The three-parameter Winkler elastic layer is proposed as a mathematical model of the foundation. The effects of rotary inertia and shear deformation are included in the analytical model of the system. The motion equations of systems are derived on the basis of the thin ring theory and Timoshenko?s theory. The separation of variables method is used to find general solutions to the free vibrations. Elaborated analytical models are used to determine the natural frequencies and the natural mode shapes of vibrations of an arbitrarily chosen set of simplified models of aviation gears and railway wheels. The eigenvalue problem is formulated and solved by using a finite element representation for each simplified model. The results for these models are discussed and compared. The proposed solutions are verified by experimental investigation. It is important to note that the solutions proposed here could be useful to engineers dealing with the dynamics of aviation gears, railway wheels and other circular ring systems.     

Relaxation of a dislocation in a nanocrystallite

Experimental studies of dislocations in nanoparticles are just beginning. The corresponding theoretical models are still lacking. In this context, the author analyzes relaxation of a dislocation in a nanoparticle. Mechanistically, this process is considered to occur primarily via dislocation drift induced by the stress-related image forces. Elementary dislocation displacements include the formation of a kink at one of the sides of the dislocation line, its diffusion along this line, and annihilation at the opposite side. For this mechanism, the dependence of the time of dislocation disappearance on the nanoparticle size has been identified.