高效InGaN/AlInGaN发光二极管的结构设计及其理论研究（英文）

利用Advanced Physical Models of Semiconductor Devices(APSYS)理论对比研究了InGaN/AlInGaN和InGaN/GaN多量子阱作为有源层的InGaN基发光二极管的结构和电学特性。与InGaN/GaN基LED中GaN作为垒层材料相比,在AlInGaN材料体系中,通过调节AlInGaN中Al和In的组分可以优化器件的性能。当InGaN阱层材料中In组分为8%时,可以实现无应力的In0.08Ga0.92N/AlInGaN基LED。在这种无应力结构中可以进一步降低大功率LED的"效率下降"(Effciency droop)问题。理论模拟结果显示,四元系AlInGaN作为垒层可以进一步减少载流子泄露,增加空穴注入效率,减少极化场对器件性能的影响。在In0.08Ga0.92N/AlInGaN量子阱中的载流子浓度、有源层的辐射复合率、电流特性曲线和内量子效率等方面都优于InGaN/GaN基LED。无应变AlInGaN垒层代替传统的GaN垒层后,能够得到高效的发光二极管,并且大电流注入下的"效率滚降"问题得到改善。     

高In组分InxGa1－xN/GaN多量子阱材料电致荧光谱的研究

研究了高In组分In_xGa_1-xN/GaN（x≈30%）多量子阱（MQWs）结构 发光二极管样品在不同注入电流下的电致荧光（EL）谱及反常的双峰现象.结果表明：有源区 内建电场在外界电流注入条件下逐渐受屏蔽，这一效应在高In组分In_xGa_{1 -x}N/GaN MQWs材料的发光复合机理中占有重要地位. 关键词： xGa_1-xN/GaN多量子阱')" href="#">In_xGa_1-xN/GaN多量子阱 电致荧光谱 内建电场     

GaN基激光器多量子阱垒材料的研究

在(0001)蓝宝石衬底上分别用金属有机化学气相沉积技术外延生长了InGaN/GaN,InGaN/InGaN,InGaN/AlInGaN多量子阱激光器结构,并分别制作了脊形波导GaN基激光器.同步辐射X射线衍射,电注入受激发射光谱测试及光功率-电流(L-D)测试证明,相对于GaN垒材料,InGaN垒材料,AlInGaN四元合金垒材料更能改善多量子阱的晶体质量,提高量子阱的最子效率及降低激光器阈值电流.相关的机制为:组分调节合适的四元合金垒层中Al的掺入使得量子阱势垒高度增加,阱区收集载流子的能力增强;In的掺入能更多地补偿应力,减少了由于缺陷和位错所产生的非辐射复合中心密度;In的掺人还减小了量子阱中应力引致的压电场,电子空穴波函数空间交叠得以加强,使得辐射复合增加.     

垒掺In提高InGaN/GaN多量子阱发光特性

利用金属有机物化学气相淀积技术在蓝宝石衬底上生长InGaN/GaN多量子阱结构.对多量子阱垒层掺In和非掺In进行了比较研究，结果表明，垒掺In 的样品界面质量变差，但明显增加了光致发光谱的峰值强度和积分强度，带边峰与黄光峰强度之比增大，降低了表面粗糙度.利用这两种结构制备了相应的发光二极管(LED)样品.通过电荧光测量可知，垒掺In的LED比非掺In的LED有较高的发光强度和相对均匀的波长，这主要是由于垒掺In后降低了阱与垒之间晶格失配的应力，从而降低了极化电场，提高了辐射复合效率. 关键词： InGaN/GaN多量子阱 X射线双晶衍射 原子力显微镜 光致发光     

In组分渐变提高InGaN/GaN多量子阱发光二极管发光性能

利用金属有机物化学气相沉积系统在蓝宝石衬底上通过有源层的变温生长,得到In组分渐变的量子阱结构,从而获得具有三角形能带结构的InGaN/GaN多量子阱发光二极管(LED)(简称三角形量子阱结构LED).变温光致发光谱结果表明,相对于传统具有方形能带结构的量子阱LED(简称方形量子阱结构LED),三角形量子阱结构有效提高了量子阱中电子和空穴波函数的空间交叠,从而增加了LED的内量子效率;电致发光谱结果表明,三角形量子阱结构LED器件与传统结构LED器件相比,明显改善了发光峰值波长随着电流的蓝移现象.通过以上     

影响GaN基蓝光LED能带结构与光谱特性关系的仿真研究

本文采用Silvaco TCAD软件对GaN基InGaN/GaN量子阱蓝光发光二极管(LED)的光谱特性进行了仿真研究。研究结果表明:光谱会随着注入电压的增加而产生蓝移现象,并出现0.365μm处的紫外光发光峰;发光效率在正向电流较小时增长很快,随着正向电流进一步增加而逐渐趋于饱和;随着量子阱中In组分和量子阱阱层厚度的增加,发光光谱出现红移现象,并且发光效率下降。仿真结果对GaN基InGaN/GaN量子阱结构蓝光LED的设计和优化提供一定的依据。     

载流子复合机制对InGaN多量子阱蓝光LED调制带宽的影响

通过设计InGaN多量子阱LED有源区的不同结构，研究了载流子复合机制对LED调制速度的影响。结果显示，由于窄量子阱LED的载流子空间波函数重叠几率更高，且电子泄露效应更显著，所以复合速率更快，调制带宽更高。In组分为1%的InGaN量子垒LED可提高辐射复合的权重，使得调制带宽高于GaN量子垒LED；In组分为5%时，电子泄露和俄歇复合占据主导地位，且由于这两种复合机制复合速率很快，所以调制带宽显著提高。     

不同掺杂类型的GaN间隔层和量子阱垒层对双波长LED作用的研究

采用软件理论分析的方法对不同掺杂类型的GaN间隔层和量子阱垒层在InGaN/GaN多量子阱双波长发光二极管中对发光光强、内量子效率、电子空穴浓度分布、溢出电流等作用进行模拟分析. 分析结果表明,p型掺杂的GaN间隔层与量子阱垒层的引入同不掺杂和n型掺杂两种类型比较,可以大大减少溢出电子流,极大地提高各量子阱内空穴浓度,提高双波长发光二极管的发光强度,极大的改善内量子效率随电流增大而下降问题. 关键词： GaN 掺杂类型 数值模拟 双波长发光二极管     

引入n型InGaN/GaN超晶格层提高量子阱特性研究

利用金属有机物化学气相淀积技术在蓝宝石衬底上生长了InGaN/GaN量子阱结构. 研究了引入n型InGaN薄层或InGaN/GaN超晶格层的量子阱特性,结果表明通过引入n型InGaN薄层或InGaN/GaN超晶格层缓解了量子阱有源区中的应力,改善了多量子阱表面形貌,减少了V型缺陷密度,而且提高了多量子阱的光致发光强度,从而也改进了LED的发光效率. 关键词： InGaN/GaN多量子阱 原子力显微镜 X射线双晶衍射 光致发光     

量子阱垒层掺杂变化对双波长LED调控作用研究

采用APSYS软件研究了InGaN/GaN量子阱垒层掺杂变化对双波长 发光二极管发光光谱的调控问题. 在不同掺杂类型和浓度下对器件电子空穴浓度分布、 载流子复合速率、 能带结构、 发光光谱进行分析, 结果表明, 调节量子阱垒层n型和p型的掺杂浓度可以精确而有效地根据需要调控发光光谱, 解决发光光谱调控难的问题. 这些现象归因于掺杂的量子阱垒层对电子空穴分布的调控作用.     

High-efficiency InGaN/AlInGaN multiple quantum wells with lattice-matched AlInGaN superlattices barrier

A new approach to fabricating high-quality AlInGaN film as a lattice-matched barrier layer in multiple quantum wells(MQWs) is presented. The high-quality AlInGaN film is realized by growing the AlGaN/InGaN short period superlattices through metalorganic chemical vapor deposition, and then being used as a barrier in the MQWs. The crystalline quality of the MQWs with the lattice-matched AlInGaN barrier and that of the conventional InGaN/GaN MQWs are characterized by x-ray diffraction and scanning electron microscopy. The photoluminescence(PL) properties of the InGaN/AlInGa N MQWs are investigated by varying the excitation power density and temperature through comparing with those of the InGaN/GaN MQWs. The integral PL intensity of InGaN/AlInGaN MQWs is over 3 times higher than that of InGaN/GaN MQWs at room temperature under the highest excitation power. Temperature-dependent PL further demonstrates that the internal quantum efficiency of InGaN/AlInGaN MQWs(76.1%) is much higher than that of InGaN/GaN MQWs(21%).The improved luminescence performance of InGaN/AlInGaN MQWs can be attributed to the distinct reduction of the barrier-well lattice mismatch and the strain-induced non-radiative recombination centers.     

Strain Effect on Photoluminescences from InGaN MQWs with Different Barriers Grown by MOCVD

InGaN/GaN MQWs, InGaN/AlGaN MQWs and InGaN/AlInGaN MQWs are grown on （0001） sapphire substrates by MOCVD. Membrane samples are fabricated by laser lift-off technology. The photoluminescence spec-ra of membranes show a blue shift of peak positions in InGaN/GaN MQWs, a red shift of peak positions in InGaN/AlGaN MQWs and no shift of peak positions in InGaN/AIlnGaN MQWs from those of samples with substrates. Different changes in Raman scattering spectra and HR-XRD （0002） profile of InGaN/AlInGaN MQWs, from those of InGaN/GaN MQWs and InGaN/AlGaN MQWs, are observed. The fact that the strain changes differently among InGaN MQWs with different barriers is confirmed. The AIlnGaN barrier could adjust the residual stress for the least strain-induced electric field in InGaN/AIlnGaN quantum wells.     

Efficiency enhancement of InGaN based blue light emitting diodes with InGaN/GaN multilayer barriers

The advantages of InGaN based light-emitting diodes with InGaN/GaN multilayer barriers are studied.It is found that the structure with InGaN/GaN multilayer barriers shows improved light output power,lower current leakage,and less efficiency droop over its conventional InGaN/GaN counterparts.Based on the numerical simulation and analysis,these improvements on the electrical and the optical characteristics are mainly attributed to the alleviation of the electrostatic field in the quantum wells(QWs) when the InGaN/GaN multilayer barriers are used.     

Blue InGaN light-emitting diodes with dip-shaped quantum wells

InGaN based light-emitting diodes (LEDs) with dip-shaped quantum wells and conventional rectangular quantum wells are numerically investigated by using the APSYS simulation software. It is found that the structure with dip-shaped quantum wells shows improved light output power, lower current leakage and less efficiency droop. Based on numerical simulation and analysis, these improvements on the electrical and the optical characteristics are attributed mainly to the alleviation of the electrostatic field in dip-shaped InGaN/GaN multiple quantum wells (MQWs).     

具有三角形InGaN/GaN多量子阱的高内量子效率的蓝光LED(英文)

对InGaN量子阱LED的内量子效率进行了优化研究。分别对发光光谱、量子阱中的载流子浓度、能带分布、静电场和内量子效应进行了理论分析。对具有不同量子阱数量的InGaN/GaN LED进行了理论数值比对研究。研究结果表明,对于传统结构的LED而言,2个量子阱的结构相对于5个和7个量子阱具有更好的光学性能。同时还研究了具有三角形量子阱结构的LED,研究结果显示,三角形多量子阱结构具有较高的电致发光强度、更高的内量子效率和更好的发光效率,所有的优点都归因于较高的电子-空穴波函数重叠率和低的Stark效应所产生的较高的载流子输入效率和复合发光效率。     

Numerical study of optical properties of InGaN multi-quantum-well laser diodes with polarization-matched AlInGaN barrier layers

The optical properties of InGaN multi-quantum-well laser diodes with different polarization-matched AlInGaN barrier layers have been investigated numerically by employing an advanced device simulation program. The use of quaternary polarization-matched AlInGaN barrier layers enhances the electron–hole wave function overlap due to the compensation of polarization charges between InGaN quantum well and AlInGaN barrier layer. According to the simulation results, it is found that, among the polarization-matched quantum-well structures under study, lower threshold current and higher slope efficiency can be achieved simultaneously when the aluminum composition in AlInGaN barrier layers is about 10–15%. The optimal polarization-matched InGaN/AlInGaN laser diode shows lower threshold current and higher slope efficiency compared to conventional InGaN/InGaN laser diodes.     

Efficiency droop alleviation in blue light emitting diodes using the InGaN/GaN triangular-shaped quantum well

The InGaN/GaN blue light emitting diode(LED) is numerically investigated using a triangular-shaped quantum well model,which involves analysis on its energy band,carrier concentration,overlap of electron and hole wave functions,radiative recombination rate,and internal quantum efficiency.The simulation results reveal that the InGaN/GaN blue light emitting diode with triangular quantum wells exhibits a higher radiative recombination rate than the conventional light emitting diode with rectangular quantum wells due to the enhanced overlap of electron and hole wave functions(above 90%) under the polarization field.Consequently,the efficiency droop is only 18% in the light emitting diode with triangular-shaped quantum wells,which is three times lower than that in a conventional LED.     

InGaN/GaN laser diode characterization and quantum well number effect

The effect of quantum well number on the quantum efficiency and temperature characteristics of In- GaN/GaN laser diodes （LDs） is determined and investigated. The 3-nm-thick In0.13Ca0.87N wells and two 6-am-thick GaN barriers are selected as an active region for Fabry-Perot （FP） cavity waveguide edge emitting LD. The internal quantum efficiency and internal optical loss coefficient are extracted through the simulation software for single, double, and triple InGaN/GaN quantum wells. The effects of device temperature on the laser threshold current, external differential quantum efficiency （DQE）, and output wavelength are also investigated. The external quantum efficiency and characteristic temperature are improved significantly when the quantum well number is two. It is indicated that the laser structures with many quantum wells will suffer from the inhomogeneity of the carrier density within the quantum well itself which affects the LD performance.