平面镜反射率的标定及修正

 研究了用同步辐射源标定软X光掠入射平面镜的反射率。实验采用北京同步辐射装置(BSRF)-3W1B束线及反射率计靶室，在50~1 500 eV能区，做了C，Si，Ni和Au材料平面镜在1°~7°掠射角下的反射率标定曲线。由于3W1B束线的单色器采用变间距光栅作色散元件，光栅分光必然存在高次谐波，高次谐波严重影响光源的单色性，从而给平面镜的反射率标定值带来误差。前置滤片虽然能有效抵制高次谐波，但不能完全消除高次谐波。为此，利用透射光栅对光源做了单色性研究，给出高次谐波在不同能区所占光源强度的比例，从而对平面镜反射率标定值做出修正。     

软x射线平面镜不同掠射角下的反射率标定

报道了平面反射镜在不同掠射角下的反射率标定实验.实验利用北京同步辐射装置(BSRF)-3W1B束线及反射率计靶室，在束流强度40—120 mA、贮存环电子能量2 GeV专用光运行模式下，在50—1500 eV能区，做了四种材料平面镜在不同掠射角下的反射率标定.标定过程用高灵敏度无死层的硅光二极管代替x射线二极管作探测器，使输出信号提高2—3个数量级.最终给出C，Si，Ni和Au四种材料平面镜在1°—7°掠射角下的反射率标定曲线，并把实验数据与理论计算值进行了比对和分析. 关键词： 同步辐射 平面镜 反射率 标定     

软X光能谱仪探测元件响应曲线标定

报道了软X光能谱仪探测元件的能量响应曲线标定工作.实验利用北京同步辐射装置–3W1B束线及反射率计靶室,在束流40—80mA、贮存环电子能量2.2GeV专用光运行模式下,在150—1500eV能区的四个能段,做了铝阴极X射线二极管、滤光片及掠入射平面反射镜能量响应标定实验.通过实验数据比对及分析,最终给出X射线二极管在不同能量段最大可能的测量误差范围.     

软X光能谱仪探测元件晌应曲线标定

报道了软X光能诺仪探别元件的能量响应曲线标定工作．实验利用北京同步辐射装置-3W1B束经及反射率计靶室，在束流40—80mA、贮存环电子能量2.2GeV专用光运行模式下，在150—1500eV能区的四个能段，做了铝阴极X射线二权管、滤光片及擦入射平面反射镜能量响应标定实验，通过实验数据比对及分析，最终给出X射线二极管在不同能量段最大可能的测量误差范围。     

软X光多层镜反射率在同步辐射源上的标定

 软X光多层镜反射率标定实验在北京同步辐射装置 上进行，利用BSRF-3W1B 束线及其反射率计靶室(主靶室)标定不同材料的多层镜样品的反射率。多层镜的标定采用波长扫描法，以得到样品反射率随波长变化的曲线。给出了21°-B₄C/Si，21°-B₄C/Mo，10°-Cr/Ti，15°- B₄C/W，10°- B₄C/W以及6.86°-B₄C/W等6块多层镜在50～1 500 eV能段上的反射率标定曲线，并将其与理论计算结果进行比较。结果表明：标定曲线与理论曲线很好地符合。影响标定结果的总不确定度的主要因素是光子能量不确定度，其次是角度不确定度，测量不确定度的影响很小。     

同步辐射在ICF研究中的应用

介绍同步辐射在ICF研究中的应用,对多种ICF实验诊断用软X光探测元器件及设备利用北京同步辐射装置(BSRF)-3W1B作能量响应绝对标定.首先采取透射光栅分光和软X光面陈CCD观测记录,对光源进行性能研究.在50—1500eV能区分7个能段,通过不同材料的前置滤片抑制高次谐波,获得单色性好于95%的单色光.采用美国IRD公司生产的AXUV-100硅光二极管作次级标准探测器.利用BSRL的反射率计靶室及其相关联动调束系统,获得连续可调的单色光标定束.在该束线上进行了多轮实验.获得大量探测器标定数据用于ICF实验研究,提高了实验精度.     

固定角度平面镜标定方法与不确定度分析

在北京同步辐射装置新建4B7B束线没有安装反射率计,且用户空间有限的情况下,利用X光基准点还原的方法建立了一种Dante谱仪固定角度平面镜反射率标定方法。利用三光束瞄准方法完成了束线软X光基准重建,通过准直方法实现了平面镜与X光之间的高定角精度,并采取了相应的角度姿态监测,最终在实验中得到的平面镜标定角不确定度为1.0 mrad。基于固定角度平面镜多次安装和朝各个方向转动后的标定结果,获得了高精度的反射率曲线。     

在同步辐射软X射线能区硅光电二极管的自标定

在同步辐射软X光能区(50—2000eV)进行了硅光电二极管的自标定实验.因为消除了二极管的“死区”并采用很薄层的SiO₂作窗,使得可以用简单的模型来分析实验结果.由实验测得的光电流,计算出硅光电二极管的量子效率,并求得入射同步辐射的光通量.     

同步辐射标定平面镜反射率不确定度分析方法研究

为了提高多通道软X射线能谱仪的测量精度,2009年在北京同步辐射(BSRF)软X束线源上对多种材料的掠入射平面镜的反射率进行了标定.在标定实验的基础上,对光源的单色性、高次谐波以及源强稳定性、探测器响应一致性和数据采集统计误差等多项不确定因素进行了评估,给出了反射率的修正方法和相应的不确定度分析结果.     

神光Ⅱ升级装置软X光能谱仪研制北大核心CSCD

软X光能谱仪（SXS）是惯性约束聚变黑腔辐射流、辐射温度测量的主要诊断设备。根据神光Ⅱ升级装置实验需求,完成软X光谱仪系统研制,并开展了性能研究。谱仪采用环形透镜成像准直方法保证瞄准精度,通过固定角度平面镜安装机构来减少角度偏差。利用滤片、平面镜以及X光二极管（XRD）探测器的标定实验结果,得到谱仪测量能区为0．05～4．97keV。在短脉冲激光装置上开展通道时间响应性能研究,确定系统时间分辨力为99．22ps。     

Self-organization of five species in a cyclic competition game

Cyclic competition game models, particularly the “rock–paper–scissors” model, play important roles in exploring the problem of multi-species coexistence in spatially ecological systems. We propose an extended “rock–paper–scissors” game to model cyclic interactions among five species, and find that two of the five can coexistent when biodiversity disappears, which is different from the “rock–paper–scissors” game. As the number of fingers is five, we named the new model the “fingers” game, where the thumb, forefinger, middle finger, ring finger, and little finger cyclically dominate their subsequent species and are dominated by their former species. We investigate the “fingers” model in two ways: direct simulations and nonlinear partial differential equations. An important finding is that the number of species in a cyclic competition game has an influence on the emergence of biodiversity. To be specific, the “rock–paper–scissors” model is in favor of maintaining biodiversity in comparison with the “fingers” model when the variables (population size, reproduction rate, selection rate, and migration rate) are the same. It is also shown that the mobility and reproduction rate can promote or jeopardize biodiversity.     

Experimental study on downstep in Chinese intonation

Downstep in pitch contour of Chinese Putonghua is examined using subtly designed sentences by controlling tone combinations. The results show both automatic and nonautomatic downstep phenomena exist in Chinese. In non-automatic downstep, low tones compress downwards the pitch range of the following syllables. and the main influence of downstep is on topline. Low tone not only lower the topline behind it, but also raise the high tones before it, the effects are compatible with each other. In automatic downstep, the topline of pitch contour in intonational phrase is presented as a linear downtrend, but it differs among speakers due to the effect of personal stress practice. In comparison with downstep phenomenon in other tone or non-tone languages, the downstep ratio in Chinese is not constant, and the domain of downstep is not limited within the adjacent tones.     

Contrastive analysis on tone between Putonghua and Taiwan Mandarin

The differences of the pitch and duration of Chinese syllables between Putonghua （PTH） and Taiwan Mandarin （TM） were studied. The speech materials to be used are not only isolated syllables, but also sentences. The results reveal that： For the isolated syllables, T1 and T2 in TM are influenced by Minnan dialect, therefore their pitch are lower than those in PTH. T3 is fall-rise in PTH, while it is fall in TM. Moreover, the syllable duration sequence for different tone is T3〉T2〉T1〉T4 in PTH, while it is T1〉T2〉T3〉T4 in TM. For the syllables in sentences, T2 is mid-rise in PTH, while it is mid-level in TM. And the T3 is longer than T4 but shorter than T1 or T2 in PTH, while it is the shortest in TM. Furthermore the effects of prosodic phrase boundary on duration for different tones are almost the same in PTH, but the lengthening part of T1 or T2 is longer than that of T3 or T4 in TM.     

Abelian-Higgs phase of SU(2) QCD and glueball energy

It is shown that SU(2) QCD admits an dual Abelian-Higgs phase, with a Higgs vacuum of a type-Ⅱ superconductor. This is done by using a connection decomposition for the gluon field and the random-direction approximation. Using a bag picture with soft wall, we presented a calculational procedure for the glueball energy based on the recent proof for wall-vortices [Nucl. Phys. B 741(2006)1].     

Signal generation in an isotropic medium in scanning electron acoustic microscope

Based on the research in Ref. [5][Materials Science and Engineering, 1989; A122： 57 63], an improved model of heat source is set up, the different modes of Lamb wave in an isotropic sample generated by a chopped electron beam at frequency f are obtained with integral transform and normal function expansion method, and the output signal of PZT coupled at the back surface of the sample is found out. The generation mechanism of SEAM （Scanning Electron Acoustic Microscopy） signal is discussed. It shows that the SEAM is a near field imaging technique with high spatial resolution and its best lateral spatial resolution is about 2√2α （α is the radius of the focused electron beam）. Some of experimental results of SEAM images are presented in the paper and it shows that the spatial resolution of SEAM is better than 0.5 μm and smaller than the thermal diffusion length of the sample. Therefore the character of near field imaging in SEAM is also proved experimentally.     

High efficiency filtering using two-dimensional photonic crystal coupled cavity structures

Transmission spectra of coupled cavity structures (CCSs) in two-dimensional (2D) photonic crystals (PCs) are investigated using a coupled mode theory, and an optical filter based on CCS is proposed. The performance of the filter is investigated using finite-difference time-domain (FDTD) method, and the results show that within a very short coupling distance of about 3λ, where λ is the wavelength of signal in vacuum, the incident signals with different frequencies are separated into different channels with a contrast ratio of 20 dB. The advantages of this kind of filter are small size and easily tunable operation frequencies.     

Real-time restoration of rotational blurred image using gradient-loading

The key to the restoration of rotational motion blurred image is how to restore the image under a low cost and to correct the irreversibility of the degradation function matrix.Based on the special qualities of degradation function matrix and precise deduction in space-domain, we present a new approach using gradient-loading for restoration of rotational blurred image.By easily adding a gradient operator, the irreversibility of the original matrix is corrected and can be applied for inverse filtering then.Gradientloading is the optimized approach which combines the advantages of both the approaches using constrained least square filtering and traditional diagonal-loading.Compared with the approach using least square filtering, its peak signal-to-noise ratio (PSNR) is improved from 3.18 to 6.46dB, while the computing time is reduced to 1/2-1/3.Experimental results demonstrate the effectiveness, noise-resistibility, robustness, and low complexity of this approach, which make it more suitable for real-time environment.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

All-Optical Logic Device Using Bent Nonlinear Tapered Y-Junction Waveguide Structure

We propose an all-optical logic device made of a bent tapered Y-junction waveguide with a Kerr-type nonlinear interface. It could provide an AND gate, OR gate, and exclusive-OR (XOR) gate. We could obtain different transmission results by adjusting the bending angle. The numerical simulation results show that the device functions as AND, OR, and XOR gates.