Ni/α-Al2O3催化剂作用下苯甲醚的加氢脱氧

Ni-based catalysts supported on di erent supports (α-Al₂O₃,γ-Al₂O₃, SiO2, TiO₂, and ZrO₂) were prepared by impregnation. Effects of supports on catalytic performance were tested using hydrodeoxygenation reaction (HDO) of anisole as model reaction. Ni/α-Al₂O₃ was found to be the highest active catalyst for HDO of anisole. Under the optimal conditions, the anisole conversion is 93.25% and the hydrocarbon yield is 90.47%. Catalyst characteriza-tion using H₂-TPD method demonstrates that Ni/α-Al₂O₃ catalyst possesses more amount of active metal Ni than those of other investigated catalysts, which can enhance the cat-alytic activity for hydrogenation. Furthermore, it is found that the Ni/α-Al₂O₃ catalyst has excellent repeatability, and the carbon deposited on the surface of catalyst is negligible.     

HIGH-YIELD PRODUCTION OF MULTI-WALLED CARBON NANOTUBES BY CATALYTIC DECOMPOSITION OF BENZENE VAPOR

Multi-walled carbon nanotubes (CNTs) have been synthesized on γ-Al₂O₃ supported unitary, binary or trinity metal (Fe, Co, Ni) catalysts with benzene as carbon source in the range of 600 to 810 ℃. The growth of CNTs was carried out in a fixed bed flow reactor and the quality of carbon deposits was characterized by transmission electron microscopy. The preparation was optimized and the high-yield production of CNTs has been achieved for three mixture catalysts with the yield of high-quality CNTs higher than 200% within 60 min, reaching a maximum of 278% for 1.51 mmol/g Fe-1.51 mmol/g Co/γ-Al₂O₃ catalyst. This provides a good alternative for future large scale and low cost production of CNTs for applications.     

木质素催化转化制备异丙苯

Cumene is an important intermediate and chemical in chemical industry.In this work,directional preparation of cumene using lignin was achieved by a three-step cascade process.The mixture aromatics were first produced by the catalytic pyrolysis of lignin at 450℃ over 1% Zn/HZSM-5 catalyst,monocyclic aromatics with the selectivity of 85.7 wt% were obtained.Then,the catalytic dealkylation of heavier aromatics resulted in benzene-rich aromatics with 93.6 wt% benzene at 600℃ over Hβ catalyst.Finally,the cumene synthesis was performed by the aromatic alkylation,giving cumene selectivity of 91.6 C-mol% using the[bmim]Cl-2AlCl₁₃ ionic liquid at room temperature for 15 min.Besides,adding a small amount of methanol to the feed can efficiently suppress the coke yield and enhance the aromatics yield.The proposed transformation potentially provides a useful route for production of cumene using renewable lignin.     

Simulation of near-infrared photodiode detectors based on β-FeSi2/4H-SiC heterojunction

In this paper, we propose the near-infrared p-type β-FeSi₂/n-type 4H-SiC heterojunction photodetector with semiconducting silicide (β-FeSi₂) as the active region for the first time. Optoelectronic characteristics of the photodetector are simulated using a commercial simulator at room temperature. The results show that the photodetector has a good rectifying character and a good response to the near-infrared light. Interface states should be minimized to obtain a lower reverse leakage current. The response spectrum of the β-FeSi₂/4H-SiC detector, which consists of a p-type β-FeSi₂ absorption layer with a doping concentration of 1×10¹⁵ cm^-3 and a thickness of 2.5 μm, has a peak of 755 mA/W at 1.42 μm. The illumination of the SiC side obtains a higher responsivity than that of the β-FeSi₂ side. The results illustrate that the β-FeSi₂/4H-SiC heterojunction can be used as a near-infrared photodetector compatible with near-infrared optically-activated SiC-based power switching devices.     

利用原位傅里叶变换红外光谱诊断催化剂的特性和催化活性

The present work establishes a systematic approach based on the application of in-situ Fourier transform infrared spectroscopy (FTIR) for the investigation of the crystal structure, thermal stability, redox behavior (temperature-programmed reduction/temperatureprogrammed re-oxidation) as well as the catalytic properties of Co₃O₄ thin films. The syntheses of Co₃O₄ were achieved by chemical vapor deposition in the temperature range of 400-500℃. The structure analysis of the as-prepared material revealed the presence of two prominent IR bands peaking at 544 cm^-1 (υ₁) and 650 cm^-1 (υ₂) respectively, which originate from the stretching vibrations of the Co-O bond, characteristic of the Co₃O₄ spinel. The lattice stability limit of Co₃O₄ was estimated to be above 650℃. The redox properties of the spinel structure were determined by integrating the area under the emission bands υ₁ and υ₂ as a function of the temperature. Moreover, Co₃O₄ has been successfully tested as a catalyst towards complete oxidation of dimethyl ether below 340 ℃. The exhaust gas analysis during the catalytic process by in situ absorption FTIR revealed that only CO₂ and H₂O were detected as the final products in the catalytic reaction. The redox behavior suggests that the oxidation of dimethyl ether over Co₃O₄ follows a Mars-van Krevelen type mechanism. The comprehensive application of in situ FTIR provides a novel diagnostic tool in characterization and performance test of catalysts.     

基于Co3O4修饰SnO2纳米纤维的高响应和高选择性乙醇气体传感器

SnO₂ nanofibers were synthesized by electrospinning and modified with Co₃O₄ via impregnation in this work. Chemical composition and morphology of the nanofibers were systematically characterized, and their gas sensing properties were investigated. Results showed that Co₃O₄ modification significantly enhanced the sensing performance of SnO₂ nanofibers to ethanol gas. For a sample with 1.2 mol% Co₃O₄, the response to 100 ppm ethanol was 38.0 at 300℃, about 6.7 times larger than that of SnO₂ nanofibers. In addition, the response/recovery time was also greatly reduced. A power-law dependence of the sensor response on the ethanol concentration as well as excellent ethanol selectivity was observed for the Co₃O₄/SnO₂ sensor. The enhanced ethanol sensing performance may be attributed to the formation of p-n heterojunctions between the two oxides.     

MgO/NaY催化剂上葡萄糖水中异构制取果糖的研究

The MgO/NaY catalysts prepared by impregnation method were used for the conversion of glucose to fructose in water medium.The effects of MgO loading,reaction temperature,glucose concentration and reaction time on the catalytic performance for the reaction were studied.The activity testing results indicated that fructose could be generated effectively by controlling the components of the catalyst and reaction conditions.The maximal fructose yield of 33.8% with the selectivity of 67.3% was achieved over the 10% MgO/NaY catalyst at 100 ℃ for 2 h.Moreover,the catalysts were characterized by XRD,BET,and CO₂-TPD techniques.The structural property of NaY with higher surface area facilitated glucose conversion,and the modulated basicity of the catalyst with MgO addition contributed to the formation of fructose in the tautomerization of aldose to ketose.     

活化气氛对钼基合成醇催化剂的结构和性能的影响

Activated carbon supported Mo-based catalysts were prepared and reduced under different activation atmospheres, including pure H₂, syngas (H₂/CO=2/1), and pure CO. The catalysts structures were characterized by X-ray diffraction, X-ray absorption fine structure, and in situ diffuse reflectance infrared Fourier transform spectroscopy. The catalytic performance for the higher alcohol synthesis from syngas was tested. The pure H₂ treatment showed a high reduction capacity. The presence of a large amount of metallic Co⁰. and low valence state Mo^φ+ (0<φ<2) on the surface suggested a super activity for the CO dissociation and hydrogenation, which promoted hydrocarbons formation and reduced the alcohol selectivity. In contrast, the pure CO-reduced catalyst had a low reduction degree. The Mo and Co species at the catalyst mainly existed in the form of Mo⁴⁺ and Co²⁺. The syngas-reduced catalyst showed the highest activity and selectivity for the higher alcohols synthesis. We suggest that the syngas treatment had an appropriate reduction capacity that is between those of pure H₂ and pure CO and led to the coexistence of multivalent Co species as well as the enrichment of Mo^δ+ on the catalyst''s surface. The synergistic effects between these active species provided a better cooperativity and equilibrium between the CO dissociation, hydrogenation and CO insertion and thus contributed beneficially to the formation of higher alcohols.     

Fabrication and photoluminescence characteristics of In2O3 nanohillocks

Uniformly distributed polycrystalline indium nanohillocks are synthesized on silicon substrates with Au catalyst by using the radio frequency magnetic sputtering technique. The results show that the Au catalyst plays a key role in the formation of indium nanohillocks. After thermally oxidizing the indium nanohillocks at 500 ℃ in air for 5 h, the indium nanohillocks totally transform into In₂O₃ nanohillocks. The energy-dispersive X-ray spectroscopy result indicates that many oxygen vacancies and oxygen-indium vacancy pairs exist in the In₂O₃ nanohillocks. Photoluminescence spectra under an Ne laser excitation at 280 nm show broad emissions at 420 nm and 470 nm with a shoulder at 450 nm related to oxygen vacancies and oxygen-indium vacancies at room temperature.     

SiO2表面双酚A中空分子印迹纳米球的制备及识别性能

A novel and effective approach was developed to synthesize monodisperse hollow molecularly imprinted polymers (MHMIPs) with unfunctionalized SiO₂ spheres in a mixture of toluene and CH₃CN.The factors that affected the synthesis of MHMIPs were systematically investigated.It was determined that a suitable ratio of toluene to CH₃CN and the use of a functional monomer that can generate double H-bonding interactions were the critical factors to obtain MHMIPs with high uniformity and monodispersion.The obtained MHMIPs exhibited a fast adsorption rate and high adsorption capacity (270 μmol/g) for bisphenol A.As the shell thickness increased from 90 nm to 130 nm,the binding capacity of the imprinted shells decreased gradually.The relative selectivity coefficients of MHMIPs for tetra-bromobisphenol A (TBBPA),phenol and p-tert-butylphenol (PTBP) were calculated as 1.53,1.83 and 1.90,respectively.These findings indicate that MHMIPs have good adsorption performances and suggest applications in the selective removal or sensitive analysis of bisphenol A.     

XPS investigation of diffusion of two-layer ZrO2/SiO2 and SiO2/ZrO2 sol–gel films

Two-layer ZrO₂/SiO₂ and SiO₂/ZrO₂ films were deposited on K9 glass substrates by sol–gel dip coating method. X-ray photoelectron spectroscopy (XPS) technique was used to investigate the diffusion of ZrO₂/SiO₂ and SiO₂/ZrO₂ films. To explain the difference of diffusion between ZrO₂/SiO₂ and SiO₂/ZrO₂ films, porous ratio and surface morphology of monolayer SiO₂ and ZrO₂ films were analyzed by using ellipsometry and atomic force microscopy (AFM). We found that for the ZrO₂/SiO₂ films there was a diffusion layer with a certain thickness and the atomic concentrations of Si and Zr changed rapidly; for the SiO₂/ZrO₂ films, the atomic concentrations of Si and Zr changed relatively slowly, and the ZrO₂ layer had diffused through the entire SiO₂ layer. The difference of diffusion between ZrO₂/SiO₂ and SiO₂/ZrO₂ films was influenced by the microstructure of SiO₂ and ZrO₂.     

Hydrothermal treatment of gadolinium oxide in presence of silica

Abstract

Hydrothermal and solvothermal (isopropanol) treatments of gadolinium oxide and silica were investigated under different pressure and temperature conditions. Products were examined by infrared vibrational spectroscopy (IR), x-ray powder diffraction (XRD) and thermal analysis (DTA, TG). Hexagonal gadolinium hydroxide was obtained in hydrothermal conditions, even in presence of silica, while no change was observed from isopropanolic medium treatment. Hydrothermally treated samples are more reactive as precursors for solid state reactions in inorganic synthesis.     

Influence of postdeposition annealing on structural properties and electrical characteristics of thin Tm2O3 and Tm2Ti2O7 dielectrics

We describe the structural properties and electrical characteristics of thin thulium oxide (Tm₂O₃) and thulium titanium oxide (Tm₂Ti₂O₇) as gate dielectrics deposited on silicon substrates through reactive sputtering. The structural and morphological features of these films were explored by X-ray diffraction, X-ray photoelectron spectroscopy, secondary ion mass spectrometry, and atomic force microscopy, measurements. It is found that the Tm₂Ti₂O₇ film annealed at 800 °C exhibited a thinner capacitance equivalent thickness of 19.8 Å, a lower interface trap density of 8.37 × 10¹¹ eV⁻¹ cm⁻², and a smaller hysteresis voltage of ∼4 mV than the other conditions. We attribute this behavior to the Ti incorporated into the Tm₂O₃ film improving the interfacial layer and the surface roughness. This film also shows negligible degrees of charge trapping at high electric field stress.     

Mechanism of amorphous Ge2Sb2Te5 removal during chemical mechanical planarization in acidic H2O2 slurry

In this paper, chemical mechanical planarization (CMP) of amorphous Ge2Sb2Te5 (a-GST) in acidic H2O2 slurry is investigated. It was found that the removal rate of a-GST is strongly dependent on H2O2 concentration and gradually increases with the increase in H2O2 concentration, but the static etch rate first increases and then slowly decreases with the increase in H2O2 concentration. To understand the chemical reaction behavior of H2O2 on the a-GST surface, the potentiodynamic polarization curve, surface morphology and cross-section of a-GST immersed in acidic slurry are measured and the results reveal that a-GST exhibits a from active to passive behavior for from low to high concentration of H2O2 . Finally, a possible removal mechanism of a-GST in different concentrations of H2O2 in the acidic slurry is described.     

A neutron powder diffraction study of the helimagnetic structure of TlCo2Se2−xSx

The magnetic layer structure of TlCo₂Se_2−xS_x has been thoroughly re-investigated with neutron powder diffraction. The cobalt magnetic moments are ferromagnetically arranged within the layers, but the interlayer coupling differs profoundly with varying composition (x): the spins in TlCo₂Se₂ form a helix along the c-axis with a turning-angle of ∼119° at 1.4 K. This kind of helical structure prevails for 0≤x≤1.5 with a gradual decrease of the angle with increasing sulphur content, down to 34°, showing an almost linear relationship with the interlayer distance of Co-Co. For x≥1.75 the interlayer coupling changes to ferromagnetic. Unexpectedly, two helices were found to coexist at x=0.5 and x=1.0. The interaction between adjacent cobalt layers is there characterized by an incommensurate angle (106°, resp., 73°) together with a commensurate angle of 90°. The magnetic structures have been refined as two magnetic phases, each having a characteristic wave vector. A tentative model where the symmetry of the structure and the interlayer distance compete is considered for explaining the simultaneous occurrence of the two kinds of diffraction profile satellites.     

Effects of RE2O3 (RE = Tm, Sc, Yb) addition on the superconducting properties of ErBa2Cu3Oy

We investigated the effects of added Tm₂O₃, Sc₂O₃, and Yb₂O₃ on the superconducting properties of sintered Er123 samples. Tm₂O₃ addition caused the least T_c degradation, exhibiting a T_c above 90 K even for 17 vol% addition. Samples with added Sc₂O₃ maintained a T_c at above 90 K up to an addition of 7.2 vol%, while Yb₂O₃-containing samples showed a monotonic decrease in T_c with increased vol% of added Yb₂O₃. Tm₂O₃-containing samples exhibited a slight increase in J_c(0.1 T)/J_c(0) and had constant J_c values even for 17 vol% addition. XRD and SEM results indicate that the Tm₂O₃ is very stable in the superconducting matrix.     

ESR of Gamma Irradiated C2H204.2H2O Single Crystal

The gamma-irradiated samples of vacuumed powder and single crystal of C₂H₂O₄.2H₂O have been investigated by ESR method. the spectra of these single crystal and unvacuumed powder are attributed to R C HOH radical, but the peaks belonging to this radical in the gamma irradiated powder sample are not observed in the spectrum after having been vacuumed. After a and g tensor values of this radical have been calculated, it was observed to be anisotropic. At low temperature, a considerable change in the spectrum has not been observed.     

Phase relations in the ZnO-V2O5-K2O system

The subsolidus phase relations of a ZnO-V 2 O 5-K 2 O system are investigated by X-ray powder diffraction.There is 1 ternary compound,11 binary compounds and 14 three-phase regions in this system.The phase diagrams of V 2 O 5 K 2 O with the K 2 O content ranging from 0 to 71 mol% and pseudo-binary system of ZnO-K 2 ZnV 2 O 7 are also studied by X-ray powder diffraction and differential thermal analysis methods.     

Thermally stimulated luminescence from alkaline earth borates

The thermally stimulated luminescence from XB₂O₄ (X=Ca,Sr,Ba) has been investigated. The results on CaB₂O₄ and SrB₂O₄ are being reported here for the first time. In both cases, the emission is found to be quite intense, contrary to the case with BaB₂O₄. The presence of two peaks in the glow curves is noted over the temperature range of 300-570 K. The emission spectra corresponding to both the peaks have been observed to be identical, consisting of two broad emissions, one in the UV and other in the blue-green regions. The emission is apparently quite different from that of BaB₂O₄ in which case only very weak emission spreading over a broad wavelength range around 410 nm is observed. This result has been understood in terms of the overlap between the excitation and the emission spectra.     

Rotational dependences of line half-widths for CO and CO2 confined in SiO2/Al2O3 xerogel

The absorption spectra of CO and CO₂ confined in nanopores of SiO₂/Al₂O₃ xerogel have been measured using a Bruker IFS-125 HR Fourier spectrometer. Dependences of the half-width values on rotational quantum numbers and the line shift mean values are studied and compared with the data available in literature. Possible causes which can affect the rotational dependences are discussed.