Gels at interfaces

We discuss the adsorption of polymer gels on flat surfaces. Even in cases of complete wetting where the spreading power S is positive and where an equivalent liquid would spread, the elastic stresses due to the gel deformation upon adsorption oppose the spreading. The competition between elasticity characterized by the bulk shear modulus G and capillarity characterized by the spreading power S defines a typical length scale ℓ = S/G for the deformation in the gel. For loose gels ℓ can be of the order of 1 μm. Macroscopic gels larger than ℓ deform only at their edges over a region of size ℓ. Microscopic gels smaller than ℓ show a finite deformation despite the elastic stresses. The elastic stresses limit the spreading of the polymer, but solvent can be sucked out of a swollen gel by wetting the surface. The thin solvent film can extend rather far from the gel edge and carry solvent. We calculate the kinetics of the solvent film formation and of the solvent transfer from a more swollen gel to a less swollen gel. Received 16 July 2001     

Confinement and processing effects on glass transition temperature and physical aging in ultrathin polymer films: Novel fluorescence measurements

Fluorescence intensity measurements of chromophore-doped or -labeled polymers have been used for the first time to determine the effects of decreasing film thickness on glass transition temperature, T _g, the relative strength of the glass transition, and the relative rate of physical aging below T _g in supported, ultrathin polymer films. The temperature dependence of fluorescence intensity measured in the glassy state of thin and ultrathin films of pyrene-doped polystyrene (PS), poly(isobutyl methacrylate) (PiBMA), and poly(2-vinylpyridine) (P2VP) differs from that in the rubbery state with a transition at T _g. Positive deviations from bulk T _g are observed in ultrathin PiBMA and P2VP films on silica substrates while substantial negative deviations from bulk T _g are observed in ultrathin PS films on silica substrates. The relative difference in the temperature dependences of fluorescence intensity in the rubbery and glassy states is usually reduced with decreasing film thickness, indicating that the strength of the glass transition is reduced in thinner films. The temperature dependence of fluorescence intensity also provides useful information on effects of processing history as well as on the degree of polymer-substrate interaction. In addition, when used as a polymer label, a mobility-sensitive rotor chromophore is demonstrated to be useful in measuring relative rates of physical aging in films as thin as 10 nm. Received 21 August 2001     

Mobility in thin polymer films ranging from local segmental motion, Rouse modes to whole chain motion: A coupling model consideration

Large increases of mobility of local segmental relaxation observed in polymer films as the film thickness is decreased, as evidenced by decreases of the glass temperature, are not found for relaxation mechanisms that have longer length scales including the Rouse relaxation modes and the diffusion of entire polymer chains. We show that the coupling model predictions, when extended to consider polymer thin films, are consistent with a large increase of the mobility of the local segmental motions and the lack of such a change for the Rouse modes and the diffusion of entire polymer chains. There are two effects that can reduce the coupling parameter of the local segmental relaxation in thin films. One is the chain orientation that is induced parallel to the surface when the film thickness h becomes smaller than the end-to-end distance of the chains and the other is a finite-size effect when h is no longer large compared to the cooperative length scale. Extremely thin ( ≈ 1.5 nm) films obtained by intercalating a polymer into layered silicates have thickness significantly less than the cooperative length scale near the bulk polymer glass transition temperature. As a result, the coupling parameter of the local segmental relaxation in such thin films is reduced almost to zero. With this plausible assumption, we show the coupling model can explain quantitatively the large decrease of the local segmental relaxation time found experimentally. Received 1 August 2001 and Received in final form 1 December 2001     

Molecular dynamics in thin films of isotactic poly(methyl methacrylate)

The molecular dynamics in thin films (18 nm-137 nm) of isotactic poly(methyl methacrylate) (i-PMMA) of two molecular weights embedded between aluminium electrodes are measured by means of dielectric spectroscopy in the frequency range from 50 mHz to 10 MHz at temperatures between 273 K and 392 K. The observed dynamics is characterized by two relaxation processes: the dynamic glass transition (α-relaxation) and a (local) secondary β-relaxation. While the latter does not depend on the dimensions of the sample, the dynamic glass transition becomes faster (≤2 decades) with decreasing film thickness. This results in a shift of the glass transition temperature T _g to lower values compared to the bulk. With decreasing film thickness a broadening of the relaxation time distribution and a decrease of the dielectric strength is observed for the α-relaxation. This enables to deduce a model based on immobilized boundary layers and on a region displaying a dynamics faster than in the bulk. Additionally, T _g was determined by temperature-dependent ellipsometric measurements of the thickness of films prepared on silica. These measurements yield a gradual increase of T _g with decreasing film thickness. The findings concerning the different thickness dependences of T _g are explained by changes of the interaction between the polymer and the substrates. A quantitative analysis of the T _g shifts incorporates recently developed models to describe the glass transition in thin polymer films. Received 12 August 2001 and Received in final form 16 November 2001     

The timescale of spinodal dewetting at a polymer/polymer interface

We investigate the dynamics of spinodal dewetting in liquid-liquid polymer systems. Dewetting of poly(methyl-methacrylate) (PMMA) thin films on polystyrene (PS) “substrates” is followed in situ using neutron reflectivity. By following the development of roughness at the PS/PMMA interface and the PMMA surface we extract characteristic growth times for the dewetting process. These characteristic growth times are measured as a function of the molecular weight of the two polymers. By also carrying out experiments in the regime where the dynamics are independent of the PS molecular weight, we are able to use dewetting to probe the scaling of the PMMA thin film viscosity with temperature and molecular weight. We find that this scaling reflects bulk behaviour. However, absolute values are low compared to bulk viscosities, which we suggest may be due in part to slippage at the polymer/polymer interface. Received 25 June 2001 and Received in final form 5 December 2001     

Glassy effects in the swelling/collapse dynamics of homogeneous polymers

We investigate, using numerical simulations and analytical arguments, a simple one-dimensional model for the swelling or the collapse of a closed polymer chain of size N, representing the dynamical evolution of a polymer in a Θ-solvent that is rapidly changed into a good solvent (swelling) or a bad solvent (collapse). In the case of swelling, the density profile for intermediate times is parabolic and expands in space as t ^1/3, as predicted by a Flory-like continuum theory. The dynamics slows down after a time ∝N ² when the chain becomes stretched, and the polymer gets stuck in metastable “zig-zag” configurations, from which it escapes through thermal activation. The size of the polymer in the final stages is found to grow as . In the case of collapse, the chain very quickly (after a time of order unity) breaks up into clusters of monomers (“pearls”). The evolution of the chain then proceeds through a slow growth of the size of these metastable clusters, again evolving as the logarithm of time. We enumerate the total number of metastable states as a function of the extension of the chain, and deduce from this computation that the radius of the chain should decrease as 1/ln(ln t). We compute the total number of metastable states with a given value of the energy, and find that the complexity is non-zero for arbitrary low energies. We also obtain the distribution of cluster sizes, that we compare to simple “cut-in-two” coalescence models. Finally, we determine the aging properties of the dynamical structure. The subaging behaviour that we find is attributed to the tail of the distribution at small cluster sizes, corresponding to anomalously “fast” clusters (as compared to the average). We argue that this mechanism for subaging might hold in other slowly coarsening systems. Received 23 October 2000     

Aging and non-linear glassy dynamics in a mean field model

The mean field approach of glassy dynamics successfully describes systems which are out-of-equilibrium in their low temperature phase. In some cases an aging behaviour is found, with no stationary regime ever reached. In the presence of dissipative forces however, the dynamics is indeed stationary, but still out-of-equilibrium, as inferred by a significant violation of the fluctuation dissipation theorem. The mean field dynamics of a particle in a random but short-range correlated environment, offers the opportunity of observing both the aging and driven stationary regimes. Using a geometrical approach previously introduced by the author, we study here the relation between these two situations, in the pure relaxational limit, i.e. the zero temperature case. In the stationary regime, the velocity (v)-force (F) characteristics is a power law v∼F ⁴, while the characteristic times scale like powers of v, in agreement with an early proposal by Horner. The cross-over between the aging, linear-response regime and the non-linear stationary regime is smooth, and we propose a parametrization of the correlation functions valid in both cases, by means of an “effective time”. We conclude that aging and non-linear response are dual manifestations of a single out-of-equilibrium state, which might be a generic situation. Received 7 May 2000 and Received in final form 22 August 2000     

Shear modulus of polydomain, mono-domain and non-mesomorphic side-chain elastomers: Influence of the nematic order

We investigate the behavior of the complex shear modulus of a series of elastomers including mono-domain and poly-domain liquid crystal samples, and a non-mesomorphic sample. We find that the dynamics of the glass transition are strongly modified by the nematic order. This result explains why the truly elastic response of liquid crystal elastomers can only be observed in the isotropic phase at very high temperatures and at very low frequencies. Between the elastic regime and the glassy state, the elastomers have a visco-elastic regime, which is characterized by a Rouse-like behavior for mono-domain and poly-domain samples, and by a Zimm-like behavior for the non-mesomorphic sample. We also show that the mono-domain sample exhibits marked anisotropy of the shear-modulus G ^′. This anisotropy, which is observed for the first time, is a function of frequency and is inverted between low and high frequencies, due to relaxation effects of the orientational order. Received 28 January 2000 and Received in final form 16 October 2000     

Dewetting on porous media with aspiration

We consider a porous solid covered with a water film (or with a drop) in situations where the liquid is pumped in, either spontaneously (if the porous medium is hydrophilic) or mechanically (by an external pump). The dynamics of dewetting is then strongly modified. We analyse a few major examples, a) horizontal films, which break at a certain critical thickness, b) the “modified Landau-Levich problem” where a porous plate moves up from a bath and carries a film: aspiration towards the plate limits the height H reached by the film, c) certain situation where the hysteresis of contact angles is important. Received 5 October 1999 and Received in final form 7 February 2000     

Formation of adhesive contacts: Spreading versus dewetting

A soft bead (radius R _b) is pressed with a force F against a hydrophobic glass plate through a water drop (“wet” JKR set-up). We observe with a fast camera the growth of the contact zone bridging the rubber bead to the glass. Depending on the approach velocity V, two regimes are observed : i) at large V a liquid film is squeezed at the interface and dewets by nucleation and growth of a dry contact; ii) at low velocities, the bead remains nearly spherical. As it comes into contact, the rubber bead spreads on the glass with a characteristic time (in the range of one millisecond) τ ≈ ηR _b ²/F, where η is the liquid viscosity. The laws of spreading are interpreted by a balance of global mechanical and viscous forces. Received: 22 December 2002 / Accepted: 24 March 2003 / Published online: 29 April 2003 RID="a" ID="a"e-mail: brochard@curie.fr