利用生物质合成气在钼基催化剂上制备混合醇

采用柠檬酸作络合剂的溶胶凝胶法制备了一系列的钼基催化剂,并应用到从生物质气化合成气有效合成低碳混合醇的实际过程中. 在钼基催化剂中,Cu₁Co₁Fe₁Mo₁Zn_0.5-6%K催化剂具有相对较高的混合醇时空产率. 通过实验发现, 反应温度在340 oC以下时,碳转化率随着反应温度的增加而不断上升,总醇的选择性却逐渐下降. 在试验测试的条件内,从生物质气化合成气合成的混合醇最大产率为494.8 g/(kg_catal·h),其中C2⁺醇(C2-C6高碳醇)占总醇含量的80.4%. 在不同的钼基催化剂上合成的混合醇,其醇分布除甲醇以外均符合Schulz-Flory方程. 在醇类产物中,C2以上的高级醇含量占总醇重量的百分比为70%-85%. 同时,利用X射线衍射和BET等表征手段对钼基催化剂的形态和结构进行了表征. 从生物质合成气生产的洁净生物质燃料混合醇具有较高的辛烷值,可以用作运输燃料或汽油的添加剂.     

利用生物质气化合成气在FeCuZnAlK催化剂上高效制备清洁生物燃料

研究了生物质气化合成气在Fe_1.5Cu₁Zn₁Al₁K_0.117催化剂上高效转化为清洁生物燃料的合成过程. 利用生物质气化合成气合成的生物燃料最大产率为1.59 kg/(kgcatal·h), 其中醇占0.57 kg/(kgcatal·h), 液体烃占1.02 kg/(kgcatal·h). 在生物燃料中, 醇类产物主要为C2⁺醇(主要为C2-C6高碳醇), 其含量占总醇的7     

活化气氛对钼基合成醇催化剂的结构和性能的影响

Activated carbon supported Mo-based catalysts were prepared and reduced under different activation atmospheres, including pure H₂, syngas (H₂/CO=2/1), and pure CO. The catalysts structures were characterized by X-ray diffraction, X-ray absorption fine structure, and in situ diffuse reflectance infrared Fourier transform spectroscopy. The catalytic performance for the higher alcohol synthesis from syngas was tested. The pure H₂ treatment showed a high reduction capacity. The presence of a large amount of metallic Co⁰. and low valence state Mo^φ+ (0<φ<2) on the surface suggested a super activity for the CO dissociation and hydrogenation, which promoted hydrocarbons formation and reduced the alcohol selectivity. In contrast, the pure CO-reduced catalyst had a low reduction degree. The Mo and Co species at the catalyst mainly existed in the form of Mo⁴⁺ and Co²⁺. The syngas-reduced catalyst showed the highest activity and selectivity for the higher alcohols synthesis. We suggest that the syngas treatment had an appropriate reduction capacity that is between those of pure H₂ and pure CO and led to the coexistence of multivalent Co species as well as the enrichment of Mo^δ+ on the catalyst''s surface. The synergistic effects between these active species provided a better cooperativity and equilibrium between the CO dissociation, hydrogenation and CO insertion and thus contributed beneficially to the formation of higher alcohols.     

在太阳光照射和不外加酸下TiO2双功能催化剂光催化还原Cr(VI)离子

利用硫酸氧钛铵的热分解控制制备了氮和硫共同掺杂的TiO₂双功能光催化剂. TiO₂双功能光催化剂同时具备光催化性能和较强的Br?nsted酸性,因此能够在太阳光照射和不外加酸下有效光催化还原Cr(VI)离子. 其光催化还原Cr(VI)离子的活性要优于通过外加硫酸调节到等同pH值和太阳光照射下P25光催化剂光催化还原Cr(VI)离子的活性.     

钴改性Fe3O4-MnO2催化转化生物质合成气制备液体燃料

本文制备了用于费托合成反应的钴改性Fe₃O₄-MnO₂双功能催化剂,并探究了钴负载量对Fe-Co协同效应的影响以及Fe₁Co_xMn₁催化剂的费托合成反应性能. 实验发现,在Fe₃O₄-Mn催化剂中加入Co可促进铁氧化物的还原、增加反应过程中铁位点的活性. 此外,Co的加入可增强Fe-Co金属间的电子转移,加强两者的协同作用,提高催化性能. Co负载较高的Fe₁Co_xMn₁催化剂可进一步促进加氢反应能力,使产品分布向短链烃方向转移. 在280 ^°C、2.0 MPa和3000 h^-1的最佳工况条件下,Fe₁Co₁Mn₁催化剂的液体燃料收率最高.     

K-Co-Mo/CNTs催化剂合成低碳醇性能研究

A series of carbon nanotubes-supported K-Co-Mo catalysts were prepared by a sol-gel method combined with incipient wetness impregnation.The catalyst structures were characterized by X-ray diffraction,N₂ adsorption-desorption,transmission electron microscopy and H₂-TPD,and its catalytic performance toward the synthesis of higher alcohols from syngas was investigated.The as-prepared catalyst particles had a low crystallization degree and high dispersion on the outer and inner surface of CNTs.The uniform mesoporous structure of CNTs increased the diffusion rate of reactants and products,thus promoting the reaction conversion.Furthermore,the incorporation of CNTs support led to a high capability of hydrogen absorption and spillover and promoted the formation of alkyl group,which served as the key intermediate for the alcohol formation and carbon chain growth.Benefiting from these characteristics,the CNTs supported Mo-based catalyst showed the excellent catalytic performance for the higher alcohols synthesis as compared to the unsupported catalyst and activated carbon supported catalyst.     

农用红蓝转光液的性能

CaS:Cu⁺,Eu²⁺荧光粉添加到高分子溶液中配成转光液,喷涂后自然条件下干燥成膜,测试了薄膜的荧光光谱、透光率、荧光抗衰减性能。结果表明,转光液所成薄膜荧光光谱与其添加的荧光粉光谱一致.具有吸收紫外光发射432nm蓝光和648nm红光,吸收绿光发射648nm红光的作用,转光行为有利于植物光合作用。薄膜可见光区透光率在75%以上,荧光抗衰减性能好。     

Dependence of Fluorescent Ability on Efficiency of Intersystem Conversion in Psoralens

Results of theoretical research for seven psoralen molecules: psoralen, 5-methoxypsoralen, 8-methoxypsoralen, angelicin, pseudoisopsoralen, isopseudopsoralen, and allopsoralen, are presented. Schemes of photophysical processes in psoralens based on quantum chemical calculation by the INDO method are analyzed. Effects of isomerism and methoxysubstitution on the energy level diagram are demonstrated. The rate constants of intersystem and internal conversions are calculated. We obtained rather high intersystem conversion constant that influences on the fluorescent yield of psoralens.     

Zn-Y/BEA上乙醇一步法制1，}3-丁二烯的反应机理及优异催化剂筛选

随着beta分子筛负载双金属催化剂的开发,乙醇一步法制1,3-丁二烯}取得了突破性进展. 然而,从乙醇到丁二烯的反应机理复杂,尚未完全阐明,也缺乏基于中心金属原子的催化剂筛选. 本文采用密度泛函理论计算方法,系统地研究了乙醇在Zn-Y/BEA催化剂上一步法制丁二烯的机理. 结果表明,乙醇脱氢更倾向于在Zn位点进行,决速步骤的反应热仅为0.77 eV;羟醇缩合生成丁二烯更倾向于在Y位点进行,决速步骤的反应热仅为0.69 eV. 基于所揭示的反应机理,选择了六种元素代替Y来筛选用于该反应的Zn-M/BEA(M=Sn、Nb、Ta、Hf、Zr、Ti)的优良组合. 结果表明,与其他六种催化剂相比,Zn-Y/BEA仍是最优选的催化剂,Zn-Zr/BEA、Zn-Ti/BEA和 Zn-Sn/BEA也是乙醇转化为丁二烯的可行催化剂. 本工作不仅揭示了Zn-Y/BEA催化乙醇一步法制丁二烯的反应机理,而且为该反应提供了其他可能的催化剂选择.     

Effect of Conversion Process([I]-P→ΛΛ) in[I]--Hypernuclei

Effect of conversion process ([I]-P→ΛΛ) on[I]--hypernucleus is studied for [I]12-Be. It is found that theconversion process has a certain extent effect on properties of low-lying states of the[I]--hypernuclei.     

SSZ-13分子筛上甲醇转化过程中甲氧基物种的生成与活性研究

本文使用固体核磁共振（NMR）技术研究了SSZ-13分子筛上甲醇制烯烃反应过程中表面甲氧基物种的生成以及反应活性.通过二维¹³C-²⁷Al HMQC NMR方法确证了甲醇在分子筛骨架Brønsted酸位上生成的甲氧基物种,以及在Lewis酸位上生成的另外一种表面甲氧基物种.¹³C NMR结合气相色谱-质谱（GC-MS）实验结果表明,这两种甲氧基物种在甲醇制烯烃反应中均具有较高的反应活性,既可以导致烃池物种的生成,也可以参与烃池反应生成碳氢化合物.