双层光学薄膜参数的多入射角椭偏分析方法

本文讨论了多入射角椭偏测量中光学参数的误差因子以及最佳测量条件的选取.指出,当薄膜较厚时,多入射角椭偏测量可以精确确定膜系的光学常数和几何厚度,并用二例实测结果加以证实.本文的方法也适用于分析多层光学薄膜.     

光学薄膜鲁棒设计中膜系误差灵敏度控制

提出了一种基于膜系误差灵敏度控制的鲁棒膜系设计方法,建立了鲁棒膜系设计评价函数在膜层参数误差统计分布下的解析表达式,避免统计样本数目有限性造成的样本均值与总体期望的误差,以及过大数目样本造成的长的计算时间消耗,并通过宽带增透膜、中性分光膜和线性透射率滤光片等多种薄膜的鲁棒设计实验证实了其在膜层参数误差控制上的效果。结果表明:该新型鲁棒膜系设计方法具有内在的快速算法特性,其设计膜系对镀膜中的膜厚监控误差不敏感,对于高质量薄膜的重复制备和批量成品率的提高具有实用价值。     

用离子束溅射淀积的氧化物薄膜的折射率

介绍了用于波长为1550nm光通讯波分复用／解复用滤光片的离子束溅射的Ta2O5和SiO2薄膜在法里－珀罗多层膜中的折射率的实时所 方法及拟合方法及拟合结果，给出了它们的淀积时间，淀积速率和计算的光学厚度，分析了这些结果的可靠性。     

确定薄膜厚度和光学常数的一种新方法

借助于不同的色散公式,运用改进的单纯形法拟合分光光度计测得的透过率光谱曲线,来获得薄膜的光学常数和厚度。用科契公式分别对电子束蒸发的TiO2和反应磁控溅射的Si3N4,以及用德鲁特公式对电子束蒸发制备的ITO薄膜进行了测试,结果表明测得的光学常数和厚度,与已知的光学常数以及台阶仪测得的结果具有很好的一致性。这种方法不仅简便,而且不需要输入任何初始值,具有全局优化的能力,对厚度较薄的薄膜也可行。采用不同的色散公式可以获得各种不同薄膜的光学常数和厚度,这在光学薄膜、微电子和微光机电系统中具有实际的应用价值。     

Transparence and electrical properties of ZnO-based multilayer electrode

Three-layered ZnO/Ag–Ti/ZnO structures were prepared using both the sol-gel technique and DC magnetron sputtering. This study focuses on the electrical and optical properties of the ZnO/Ag–Ti/ZnO multilayers with various thicknesses of the Ag–Ti layer. The ZnO thin film prepared by the sol–gel method was dried at 300°C for 3 minutes, and a fixed thickness of 20 nm was obtained. The thickness of the Ag–Ti thin film was controlled by varying the sputtering time. The Ag–Ti layer substantially reduced the electrical resistivity of the sol–gel-sprayed ZnO thin films. The sheet resistance of the Ag–Ti layer decreased dramatically and then became steady beyond a sputtering time of 60 s. The sputtering time of Ag–Ti thin film deposition was determined to be 60 s, taking into account the optical transmittance. Consequently, the transmittance of the ZnO/Ag–Ti/ZnO multilayer films was 71% at 550 nm and 60% at 350 nm. The sheet resistance was 4.2 Ω/sq.     

规整膜系层厚允许误差的研究

提出了一种通过计算机模拟薄膜的淀积过程来计算规整膜系层厚允许误差的方法,所计算的层厚允许误差不仅取决于膜系的设计结构,还与薄膜的淀积工艺、镀膜设备的监控精度有关.实验结果表明:采用这种方法所计算出的层厚允许误差对于薄膜的实际镀制具有指导意义.     

磁控溅射制备铬薄膜的结构和光电学性质

用直流磁控溅射技术在石英基片上制备不同厚度(5 nm~114 nm之间)的铬膜.使用X射线衍射仪和分光光度计分别检测薄膜的结构和光学性质,利用德鲁特模型和薄膜的透射、反射光谱计算铬膜的厚度和光学常量,并采用Van der Pauw方法测量薄膜电学性质.结果表明:制备的铬薄膜为体心立方的多晶态,随着膜厚的增加,薄膜的结晶性能提高,晶粒尺寸增大;在可见光区域,当膜厚小于32 nm时,随着膜厚的增加,折射率快速减小,消光系数快速增大,当膜厚大于32 nm时,折射率和消光系数均缓慢减小并逐渐趋于稳定;薄膜电阻率随膜厚的增加为一次指数衰减.     

磁控溅射制备铬薄膜的结构和光电学性质(英文)

用直流磁控溅射技术在石英基片上制备不同厚度(5nm～114nm之间)的铬膜.使用X射线衍射仪和分光光度计分别检测薄膜的结构和光学性质,利用德鲁特模型和薄膜的透射、反射光谱计算铬膜的厚度和光学常量,并采用Van der Pauw方法测量薄膜电学性质.结果表明:制备的铬薄膜为体心立方的多晶态,随着膜厚的增加,薄膜的结晶性能提高,晶粒尺寸增大;在可见光区域,当膜厚小于32nm时,随着膜厚的增加,折射率快速减小,消光系数快速增大,当膜厚大于32nm时,折射率和消光系数均缓慢减小并逐渐趋于稳定;薄膜电阻率随膜厚的增加为一次指数衰减.     

Direct Monitoring of Thickness and Refractive Index of Optical Thin Film Deposited on Fiber End-face

We propose a system for depositing thin films on waveguides which enables low-temperature deposition and precise control of the refractive index and film thickness. It is composed of a conventional ion-beam sputtering (IBS) system and a new system for directly monitoring film characteristics during deposition. We controlled refractive indices over a wide range from 1.52 to 1.97 by moving the sputtering targets (SiO₂ and Si₃N₄) in the IBS system. The refractive index or film thickness was in-situ monitored by observing the optical power reflected from the end-face of a monitoring fiber set in the deposition chamber. Antireflection coating films were successfully deposited on a fiber end-face and a laser diode chip facet with low reflectivity from 0.05 to 0.07%. This deposition system is attractive for constructing highly functional optical devices for future photonic networks.     

Optical parameters of epitaxial GaN thin film on Si substrate from the reflection spectrum

A method has been proposed for determining the optical properties of a thin film layer on absorbing substrates. The film optical parameters such as thickness, refractive index, absorption coefficient, extinction coefficient and the optical energy gap of an absorbing film are retrieved from the interference fringes of the reflection spectrum at normal incidence. The envelopes of the maxima of the spectrum E_M and of the minima E_m are introduced in analytical forms to find the reflectance amplitudes at the interfaces and approximate values of the thin film refractive index. Then, the interference orders and film thickness are calculated to get accurate values of the needed optical parameters. There are no complex fitting procedures or assumed theoretical refractive index dispersion relations. The method is applied to calculate the optical properties of an epitaxial gallium nitride thin film on a silicon (1 1 1) substrate. Good agreement between our results and the published data are obtained.