High performance polymer light-emitting diodes doped with a novel phosphorescent iridium complex

High performance polymer light-emitting diodes (PLEDs) based on a phosphor of noble metal complex bis(1,2-dipheny1-1H-benzoimidazole) iridium (acetylacetonate) [(pbi)₂Ir(acac)] doped in poly(N-vinylcarbazole) (PVK) host with various concentration were demonstrated. The photoluminescence (PL) and electroluminescence (EL) spectra of the PLEDs exhibited an emission intensity decrease of PVK and a gradually enhanced feature of (pbi)₂Ir(acac) with increased doping concentration. The device with a 5 wt% (pbi)₂Ir(acac) doped PVK system showed a high power efficiency of 3.84 lm/W and a luminance of 26,006 cd/m². The results indicated that both energy transfer and charge trapping have a significant influence on the performance of PLEDs. The devices have a broadened EL spectrum of full-width at half-maximum (FWHM) more than 100 nm, which can be realized for WOLEDs.     

Electroluminescence of organic light-emitting diodes consisting of an undoped (pbi)2Ir(acac) phosphorescent layer

The electroluminescence (EL) characteristics of phosphorescent organic light-emitting diodes (OLEDs) with an undoped bis(1,2-dipheny1-1H-benzoimidazole) iridium (acetylacetonate) [(pbi)₂Ir(acac)] emissive layer (EML) of various film thicknesses were studied. The results showed that the intensity of green light emission decreased rapidly with the increasing thickness of (pbi)₂Ir(acac), which was relevant to the triplet excimer emission. It suggested that the concentration quenching of monomer emission in the undoped (pbi)₂Ir(acac) film was mainly due to the formation of triplet excimer and partly due to the triplet-triplet annihilation (TTA) and triplet-polaron annihilation (TPA). A green OLED with a maximum luminance of 26,531 cd/m², a current efficiency of 36.2 cd/A, and a power efficiency of 32.4 lm/W was obtained, when the triplet excimer emission was eliminated. Moreover, the white OLED with low efficiency roll-off was realized due to the broadened recombination zone and reduced quenching effects in the EML when no electron blocking layer was employed.     

Improved performance and stability by an Al/Ni bilayer cathode in organic light-emitting diodes

Al/Ni bilayer cathode was used to improve the electroluminescent (EL) efficiency and stability in N,N′-bis(1-naphthyl)-N,N′-diphenyl-1,1′ biphenyl 4,4′-dimaine (NPB)/tris-(8-hydroxyquinoline) aluminum (Alq₃)-based organic light-emitting diodes. The device with LiF/Al/Ni cathode achieved a maximum power efficiency of 2.8 lm/W at current density of 1.2 mA/cm², which is 1.4 times the efficiency of device with the state-of-the-art LiF/Al cathode. Importantly, the device stability was significantly enhanced due to the utilization of LiF/Al/Ni cathode. The lifetime at 30% decay in luminance for LiF/Al/Ni cathode was extrapolated to 400 h at an initial luminance of 100 cd/m², which is 10 times better than the LiF/Al cathode.     

White organic electroluminescence from fluorescent bis (2-(2-hydroxyphenyl) benzoxazolate)zinc doped with phosphorescent material

Efficient white electroluminescence has been obtained by using an electroluminescent layer comprising of a blue fluorescent bis (2-(2-hydroxyphenyl) benzoxazolate)zinc [Zn(hpb)₂] doped with red phosphorescent bis (2-(2′-benzothienyl) pyridinato-N,C^3′)iridium(acetylacetonate) [Ir(btp)₂acac] molecules. The color coordinates of the white emission spectrum was controlled by optimizing the concentration of red dopant in the blue fluorescent emissive layer. Organic light-emitting diodes were fabricated in the configuration ITO/α-NPD/Zn(hpb)₂:0.01 wt%Ir(btp)₂acac/BCP/Alq₃/LiF/Al. The J-V-L characteristic of the device shows a turn on voltage of 5 V. The electroluminescence (EL) spectra of the device cover a wide range of visible region of the electromagnetic spectrum with three peaks around 450, 485 and 610 nm. A maximum white luminance of 3500 cd/m² with CIE coordinates of (x, y=0.34, 0.27) at 15 V has been achieved. The maximum current efficiency and power efficiency of the device was 5.2 cd/A and 1.43 lm/W respectively at 11.5 V.     

Highly efficient greenish blue-emitting organic diodes based on pyrene derivatives

We report the synthesis of pyrene derivatives as the light emissive layer for highly efficient organic electroluminescence (EL) diodes. Multilayer devices were fabricated with pyrene derivatives (ITO/NPB (50 nm)/blue material (30 nm)/BCP (10 nm)/Alq₃ (30 nm)/LiF (1 nm)/Al). By using 1,1′-dipyrene (DP) and 1,4-dipyrenyl benzene (DPB), the devices produced the blue EL emissions with 1931 Commission International de L’Eclairage coordinates of (x=0.21, y=0.35) and (x=0.19, y=0.25), respectively. The device with DPB shows a maximum brightness of 42,445 cd/m² at 400 mA/cm² and the luminance efficiency of 8.57 cd/A and 5.18 lm/W at 20 mA/cm².     

High power efficiency in single layer blue phosphorescent organic light-emitting diodes

High efficiency single layer blue phosphorescent organic light-emitting diodes (PHOLEDs) without any charge transport layer were developed. A mixed host of spirobifluorene based phosphine oxide (SPPO13) and 1, 1-bis[(di-4-tolylamino)phenyl]cyclohexane (TAPC) was used as the host in the emitting layer. A high maximum external quantum efficiency of 15.8% and a quantum efficiency of 8.6% at 1000 cd/m² were achieved in the single-layer blue PHOLEDs without any charge transport layer. The maximum power efficiency and power efficiency at 1000 cd/m² were 31.4 and 16.9 lm/W, respectively.     

High efficiency rubrene based inverted top-emission organic light emitting devices with a mixed single layer

Inverted top-emission organic light emitting devices (TEOLEDs) with a mixed single layer by mixing of electron transport materials (PyPySPyPy and Alq₃), hole transport material (α-NPD) and dope material (rubrene) were investigated. Maximum power efficiency of 3.5 lm/W and maximum luminance of 7000 cd/m² were obtained by optimizing the mixing ratio of PyPySPyPy:Alq₃:α-NPD:rubrene=25:50:25:1. Luminance and power efficiency of mixed single layer device were two times improved compared to bi-layer heterojunction device and tri-layer heterojunction device. Lifetime test also shows that the mixed single layer device exhibits longer operational lifetimes of 343 h, which is three times longer than the 109 h for tri-layer device, and two times longer than the 158 h for bi-layer device. In addition, the maximum luminance and power efficiency were obtained at 20,000 cd/m² and 7.5 lm/W, respectively, when a TPD layer of 45 nm was capped onto the top metal electrode.     

Optical and electroluminescent properties of 3,4,6-triphenyl-α-pyrone

The optical and electroluminescent properties of 3,4,6-triphenyl-α-pyrone (α-pyrone), a new blue fluoresce dye, are investigated using films prepared by wet and dry process and organic light-emitting diodes (OLEDs) fabricated with an α-pyrone-emitting layer. The optical properties of α-pyrone are found to be affected by its crystallinity. In the fabrication of OLEDs, wet processing (spin coating) is shown to be more suitable for preparation of the α-pyrone layer than dry processing (thermal evaporation). The best device performance is obtained for a device prepared using poly (n-vinylcarbazole) as the dye host, and a bathocuproine/tris-(8-hydroxyquinoline)aluminum bilayer as a hole-blocking and carrier-injection layer. The maximum luminance of this device is 3000 cd/m² at a current density of 0.2 A/cm², with a current efficiency of 1.8 cd/A at 0.02 A/cm².     

Efficient bright white organic light-emitting diode based on non-doped ultrathin 5,6,11,12-tetraphenylnaphthacene layer

High-performance undoped white organic light-emitting diode (OLED) has been fabricated using an ultrathin yellow-emitting layer of 5,6,11,12-tetraphenylnaphthacene (rubrene) inserted at two sides of interface between two N,N′-bis-(1-naphthyl)-N,N′- biphenyl-1,1′-biphenyl-4,4′- diamine (NPB) layers as a hole transporting and blue emissive layer, respectively. The results showed that a maximum luminance of the device reached to as high as 21,500 cd/m² at 15 V. The power efficiencies of 2.5 and 1.6 lm/W at a luminance of 1000 and 10000 cd/m², respectively, were obtained. The peaks of electroluminescent (EL) spectra locate at 429 and 560 nm corresponding to the Commissions Internationale De L’Eclairage (CIE) coordinates of (0.32, 0.33), which is independent of bias voltage. The performance enhancement of the device may result from direct charge carrier trapping in rubrene. Energy transfer mechanism was also found in the EL process.     

Highly efficient all phosphorescent white organic light-emitting diodes for solid state lighting applications

We report highly efficient all phosphorescent white organic light-emitting diodes (OLEDs) with an exciton-confinement structure. By stacking two emissive layers (EMLs) with different charge transporting properties, effective charges as well as exciton confinements were achieved. Accordingly, efficient blue OLEDs with a peak external quantum efficiency (EQE) over 22% and power efficacy (PE) over 50 lm/W were developed by using iridium(III) bis(4,6-(difluorophenyl) pyridinato-N,C2′)picolinate (FIrpic) as an electro-phosphorescent dopant. When the optimized orange and red EMLs were sandwiched between the stacked two blue EMLs, white OLEDs with an EQE and PE of 24.3% and 45.9 lm/W at a luminance of 1000 cd/m² were obtained without the use of any out-coupling techniques. In addition, these white OLEDs exhibit a color rendering index (CRI) value of 84 with high efficacy.     

Bright white light electroluminescent devices based on efficient management of singlet and triplet excitons

Efficient and bright white organic light-emitting devices (WOLEDs) based on phosphor sensitized fluorescence are improved by using an unusual device structure, in which phosphorescent emissive layer is sandwiched between two blue fluorescent doped ones. This architecture allows for resonant energy transfer from both the host singlet and triplet energy levels that minimizes exchange energy losses. Thus, a WOLED with a maximum luminous efficiency of 11.63 cd/A, a maximum power efficiency of 7.37 lm/W, a maximum luminance of 31,770 cd/m², and Commission Internationale de L’Eclairage coordinates of (0.34, 0.36) is achieved.     

High-efficiency Simple Structure White Organic Light-emitting Devices Based on Rubrene Ultrathin Layer

White organic light-emitting devices (WOLEDs) were fabricated with an ultrathin layer of rubrene inserted between NPB and TPBI. With a simple three-layer structure of ITO/NPB(50 nm)/rubrene(0.1 nm)/TPBI(50 nm)/LiF/Al, a white light with CIE coordinates of (0.31, 0.30) were generated. The device gave a maximum luminance efficiency of 2.04 lm/W at 5 V. Furthermore, with a multilayer structure of ITO/m-MTDATA(30 nm)/NPB(20 nm)/rubrene(0.1 nm)/TPBI(40 nm)/Alq₃(10 nm)/LiF/Al, the device reached a maximum luminance efficiency of 4.29 lm/W at 4 V and the luminance could exceed 10 000 cd/m² at 10 V.     

Eliminate the angular dependence of blue emission top-emitting organic light-emitting devices by integrating gratings

We demonstrate that the angular-dependence effect in blue emission top-emitting organic light-emitting diodes (TOLEDs) can be resolved in a very simple and effective way via introducing gratings and filling process. In this method, the shift of the peak emission wavelength with the viewing angle is successfully suppressed in TOLEDs. A desired emission pattern of approximately Lambertian is obtained. Moreover, we can observe almost the same current density and luminance in TOLEDs with and without gratings. Their maximal luminance are 10,776 cd/m² and 11,290 cd/m², respectively.     

Increased luminance of MEH-PPV and PFO based PLEDs by using salmon DNA as an electron blocking layer

The effect of salmon DNA-CTMA as an electron blocking layer (EBL) has been examined on the performance of MEH-PPV and PFO-based light emitting diodes. Though the turn-on voltage increases with incorporation of EBL, a significant increase in luminance and luminous efficiency for both the devices is observed. The EBL improves the device performance by blocking electrons at the EBL-polymer interface, thereby increasing the recombination probability of electrons and holes. The luminance of the MEH-PPV based Bio-LED increases to 100 cd/m² from 30 cd/m² while a corresponding increase for the PFO based LED is to 160 cd/m² from 80 cd/m² with and without EBL, respectively.     

All-in-one-type organic light-emitting diodes for color tuning using phosphor in glasses with Pb-free silicate powders

We demonstrate all-in-one-type organic light-emitting diodes (OLEDs) that are fabricated using a color converting plate as a substrate. The color converting plate is Pb-free phosphor-in-glass (PiG), which is prepared by mixing Y₃Al₅O₁₂:Ce³⁺ (YAG:Ce³⁺) and SiO₂–B₂O₃–RO (R = Ba, Zn) glass frit by sintering at 750 °C for 30 min. The maximum luminance, luminance efficiency, and power efficiency of blue OLEDs fabricated on commercial glass are measured as 10500 cd/m², 10.18 cd/A, and 2.95 lm/W, respectively. The Commission Internationale de l'Eclairge (CIE) coordinates of blue OLEDs is (0.167, 0.325). Our obtained results show that the luminance value decreased as the PiG thickness increased, and the glass to phosphor (GTP) ratio decreased. The OLED devices fabricated on the PiG substrate (GTP ratio = 9:1, thickness: 150 μm) showed a maximum luminance, luminance efficiency, and power efficiency of 7600 cd/m², 8.76 cd/A, and 2.85 lm/W, respectively. The CIE color coordinates changed to (0.286, 0.504) at 200 mA/cm². These results proved that color coordination can be easily adjusted by varying the GTP ratio and the thickness of the PiG.     

New heteroleptic cyclometalated iridium(III) complexes containing 2-(2′,4′-difluorophenyl)-4-methylpyridine for organic light-emitting diode applications

Two phosphorescent iridium(III) complexes (dfpmpy)₂Ir(ppc) and (dfpmpy)₂Ir(prz) [dfpmpy=2-(2′,4′-difluorophenyl)-4-methylpyridine, ppc=pipecolinate, prz=2-pyrazine carboxylate] were synthesized from the reaction of the chloro-bridged dimeric complex [(dfpmpy)₂Ir(μ-Cl)]₂ and the ancillary ligand. Their structures and photoluminescence properties were investigated and device performances for application in organic light-emitting diodes (OLEDs) were studied. The complexes adopt a distorted, octahedral geometry around the iridium metal, exhibiting cis C-C and trans N-N arrangements. The photoluminescent (PL) properties reveal that (dfpmpy)₂Ir(ppc) emits in the blue-green region (λ_max=497 nm), whereas (dfpmpy)₂Ir(prz) shows red phosphorescence (λ_max=543 nm) in the film state (5% wt. doped in PMMA). The (dfpmpy)₂Ir(ppc)- and (dfpmpy)₂Ir(prz)-based OLEDs exhibited sky-blue and greenish-yellow electroluminescence with similar current-voltage characteristics, repectively. Maximum current efficiency of (dfpmpy)₂Ir(ppc) and (dfpmpy)₂Ir(prz) were 4.4 and 7.4 cd/A, respectively. Maximum luminance values were approximately 10,000 cd/m² for the both compounds.     

Effects of hole injection layer thickness on the luminescent properties of white organic light-emitting diodes

This work investigates how the thickness of the hole injection layer (HIL) influences the luminescent characteristics of white organic light-emitting diodes (WOLED). Experimental results indicate that inserting a thin HIL (<200 Å) into a WOLED without an HIL reduces the brightness and clearly changes the chromaticity because the surface of the 4,4′,4″-tris{N,-(3-methylphenyl)-N-phenylamino}-triphenylamine) (m-MTDATA) film is extremely rough. In contrast, a dense film structure and the fine surface morphology of m-MTDATA of moderate thickness (350-650 Å) provides a uniform conducting path on which holes cross the indium tin oxide (ITO)/HIL interface, improving luminescent performance, associated with the relatively stable purity of the color of the emission, with Commission Internationale 1′Eclairage (CIE) coordinates of (x = 0.40, y = 0.40). However, inserting a thick HIL (>650 Å) reduces the luminescent performance and causes red-shift, because the holes and electrons in the effective emissive confinement region become less optimally balanced. Moreover, optimizing the device structure enables a bright WOLED with CIE coordinates of (x = 0.34, y = 0.33) to reach a luminance of 7685 cd/m² at a current density of 100 mA/cm², with a maximum luminous efficiency of 1.72 lm/W at 5.5 V.     

Simple-structure white organic light emitting diodes with high color temperature

We present high color temperature white organic light emitting diodes with a simple p-i-n structure. A sky blue phosphorescent dopant of iridium(III) bis[4,6-(difluorophenyl)-pyridinato-N,C^2’] picolinate and a red phosphorescent dopant of bis(2-phenylquinoline)(acetylacetonate)iridium(III) in the emissive layers is employed to make high color temperature devices. Very stable color variation under ?0.02 until a 5000 cd/m² brightness value is realized by efficient carrier control in a multi stacked emitting layer of blue/red/blue colors. Maximum current and power efficiencies of 23.8 cd/A and 22.9 lm/W in forward direction are obtained. With balanced emissions from the two emitters, the white light emission with very high correlated color temperature of 7308 K as well as CIE coordinates of (0.30, 0.33) is achieved.     

Efficient white organic light-emitting devices using 4,7-diphenyl-1,10-phenanthroline as block layer

A white light-emitting device has been fabricated with a structure of ITO/m-MTDATA (45 nm)/NPB (10 nm)/DPVBi (8 nm)/DPVBi:DCJTB 0.5% (15 nm)/BPhen (x nm)/Alq₃ [(55−x) nm]/LiF (1 nm)/Al, with x=0, 4, and 7. BPhen was used as the hole-blocking layer. This results in a mixture of lights from DPVBi molecules (blue-light) and DCJTB (yellow-light) molecules, producing white light emission. The chromaticity can be readily adjusted by only varying the thickness of the BPhen layer. The CIE coordinates of the device are largely insensitive to the driving voltages. When the thickness of BPhen is 7 nm, the device exhibits peak efficiency of 6.87 cd/A (3.59 lm/W) at the applied voltage of 6 V, the maximum external quantum efficiency η_ext=2.07% corresponding to 6.18 cd/A, and the maximum brightness is 18494 cd/m² at 15 V.     

NaCl/Ca/Al as an efficient cathode in organic light-emitting devices

An efficient cathode NaCl/Ca/Al used to improve the performance of organic light-emitting devices (OLEDs) was reported. Standard N,N′-bis(1-naphthyl)-N,N′-diphenyl-1,1′ biphenyl 4,4′-dimaine (NPB)/tris-(8-hydroxyquinoline) aluminum (Alq₃) devices with NaCl/Ca/Al cathode showed dramatically enhanced electroluminescent (EL) efficiency. A power efficiency of 4.6 lm/W was obtained for OLEDs with 2 nm of NaCl and 10 nm of Ca, which is much higher than 2.0 lm/W, 3.1 lm/W, 2.1 lm/W and 3.6 lm/W in devices using, respectively, the LiF (1 nm)/Al, LiF (1 nm)/Ca (10 nm)/Al, Ca (10 nm)/Al and NaCl (2 nm)/Al cathodes. The investigation of the electron injection in electron-only devices indicates that the utilization of the NaCl/Ca/Al cathode substantially enhances the electron injection current, which in case of OLEDs leads to the improvement of the brightness and efficiency.