首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
We propose a new approach to generating a pair of initial beams for a polarization converter that operates by summing up two opposite-sign circularly polarized beams. The conjugated pairs of vortex beams matched with laser modes are generated using binary diffractive optical elements (DOEs). The same binary element simultaneously serves two functions: a beam shaper and a beam splitter. Two proposed optical arrangements are compared in terms of alignment complexity and energy efficiency. The DOEs in question have been designed and fabricated. Natural experiments that demonstrate the generation of vector higher-order cylindrical beams have been conducted.  相似文献   

2.
Shanti Bhattacharya   《Optik》2008,119(7):321-328
This paper describes a simplified mesh generation technique that is based on the finite element method of calculation of beam-shaping diffractive optical elements (DOEs). The mesh generation technique uses the inherent symmetry of the incident beam to generate a mesh. Using the meshes so generated, DOEs that convert a Gaussian intensity beam to one of a specified shape, are calculated. Simulations of the results of such beam-shaping elements will be presented. Such elements have uses in industrial and medical applications where both the shape as well as the intensity distribution on the material that is to be processed is very important. For example, in industrial applications the beam may be used to uniformly heat up a specific area in which case the intensity has to be uniform across the beam. The Gaussian intensity variation of a laser has to be converted to a flat-top beam in order to achieve this. To reiterate, beam shaping refers to changing both the intensity distribution and the shape of the beam. Experimental results of the fabricated gratings will also be presented. These results will include experimental data on the method of additive lithography which can be used to improve the efficiency of DOEs.  相似文献   

3.
讨论了多层衍射光学元件的光学成像性质.给出了优化设计多层衍射光学元件最大光栅厚度的方法,分析了构成多层结构的每块单层衍射元件的衍射效率对整体衍射效率的贡献作用.在0.436~0.656 μm的可见光波段,多层衍射光学元件最低衍射效率可达到98%以上,克服了单层衍射元件偏离设计波长后衍射效率显著下降的缺点,改善了宽波段衍射效率.将多层衍射光学元件应用在折、衍射混合光学系统中能够明显提高系统的成像质量,同时使得光学系统体积减小,重量减轻,并且在某些系统中可以避免使用昂贵的特殊材料,从而可以降低光学系统的成本价格.  相似文献   

4.
分析了衍射光学元件实现共孔径相干合成的物理过程,建立了基于衍射光学元件的共孔径相干合成数学模型,推导了合成光束复振幅与入射光束和衍射光学元件相位分布之间的关系。提出用合成光束强度分布的均匀性作为评价函数的优化方法,获得了一维衍射合束器的相位分布。与文献报道的衍射光学元件分束器相比,可获得更高的合成效率。采用模拟退火算法结合随机并行梯度下降算法优化合束器设计,提高了计算效率,获得了多束衍射合束器的相位分布和合成效率。分析了单子束失效及合束器像差对合成效率的影响,结果表明:随着合束数量的增加,单子束失效对合成效率的影响逐渐减小;若使合成效率退化小于5%,衍射光学元件的波像差均方根值应控制在λ/28以内。  相似文献   

5.
有限口径非周期亚波长衍射聚焦偏转器的严格矢量优化   总被引:1,自引:0,他引:1  
有限口径非周期亚波长衍射光学器件的亚波长结构特性使得传统标量衍射理论失效,必须借助严格电磁理论进行器件的设计。提出一种循环平面波谱算法(IterativePlaneWaveSpectrumAlgorithm,IPWSA)作为器件优化算法,利用二维时域有限差分方法作为严格电磁计算模式,根据Farn方法对器件面型进行亚波长处理,设计出有限口径非周期具有亚波长结构的衍射聚焦偏转器件,偏转角为24.8°,该器件可与激光器集成构成微型集成光学系统,也可以用在红外量子阱系统中。详细分析了算法原理,设计实例验证了算法的优化效果。  相似文献   

6.
We have designed miniaturized, simple, and robust cameras composed of a single diffractive optical element (DOE) that generates a continuously self-imaging (CSI) beam. Two different DOEs are explored: the J0 Bessel transmittance, characterized by a continuous optical transfer function (OTF) and the CSI grating (CSIG), characterized by a sparse OTF. In this Letter, we will analyze the properties of both DOEs in terms of radiometric performances. We will demonstrate that the noise robustness is enhanced for a CSIG, thanks to the sparsity of its OTF. A camera using this DOE has been made and experimental images are presented to illustrate the noise robustness.  相似文献   

7.
Diffractive optical elements(DOEs) with spectrum separation and beam concentration(SSBC) functions have important applications in solar cell systems. With the SSBC DOEs, the sunlight radiation is divided into several wave bands so as to be effectively absorbed by photovoltaic materials with different band gaps. A new method is proposed for designing high-efficiency SSBC DOEs, which is physically simple, numerically fast, and universally applicable. The SSBC DOEs are designed by the new design method, and their performances are analyzed by the Fresnel diffraction integral method.The new design method takes two advantages over the previous design method. Firstly, the optical focusing efficiency is heightened by up to 10%. Secondly, focal positions of all the designed wavelengths can be designated arbitrarily and independently. It is believed that the designed SSBC DOEs should have practical applications to solar cell systems.  相似文献   

8.
提出一种基于电介质纳米砖阵列的扇出衍射光学元件的设计和实现方案,其纳米砖的深宽比低至1.5。这种扇出衍射光学元件被一束波长为633 nm的入射光束照射时,可以在远场中得到均匀的4×4点阵,发散角为32°×32°,且数值模拟与实验结果吻合良好。基于超表面材料的扇出衍射光学元件具有连续、精确的相位操纵能力和较高的偏振转换效率,并且仅需一步光刻制造工艺,可以广泛应用于工程光学的各种领域,例如光学传感,激光雷达,激光加工等。  相似文献   

9.
We evaluated the collimated beam quality of a planar microlens (PML) for parallel optical interconnect systems. It has been confirmed that the divergence beam from a single mode fiber was collimated by single PML and propagated with good beam quality by about 10 mm, which is the nominal length of microoptics components considered. The divergence beam from a vertical cavity surface emitting laser was collimated using stacked PML and the collimated beam width of 100 μm was obtained. The collimated beam profile was good enough for low loss beam interconnect in a micro-optical bench scheme.  相似文献   

10.
Properties of a new optical element — light filter based on the absorbing axicon are studied. The filter allows determining the parameters of radially-symmetric laser beams, producing precisely collimated beams, and smooth tuning of the beam power. Transformation of Gaussian, Laguerre-Gaussian, and super-Gaussian beams in the filter is considered. As a result of this transformation doughnut-like and M-like beam profiles are produced.  相似文献   

11.
With the increasing demand for space optical communication security, space chaotic optical communication has attracted a great amount of attention. Compared with traditional space optical communication, a chaotic optical communication system has a higher bit error rate(BER) for its complex system design. In order to decrease the BER of space chaotic optical communication systems, we introduce two diffractive optical elements(DOEs)at a transmitting terminal(Tx). That is because the commonly used reflective optical antenna at Tx blocks the central part of the transmission beam, which leads to a great amount of power consumption. Introducing the DOEs into the optical subsystem at Tx can reshape the transmission beam from a Gaussian distribution to a hollow Gaussian distribution so that the block of the secondary mirror in the reflective optical antenna can be avoided. In terms of the DOE influence on communication quality, we give a BER model based on a minimumshift-key(MSK) space uplink chaotic optical communication system to describe the DOE function. Based on the model, we further investigate the effect of the DOEs through analyzing the BER relationship versus basic system parameters based on the BER model. Both different mismatch conditions of chaotic systems and different atmospheric turbulence conditions are considered. These results will be helpful for the scheme design of space uplink chaotic optical communication systems.  相似文献   

12.
Hollow metal waveguides feature well collimated beams and small losses across air gaps. This enables introduction of multiple optical beam splitters, or taps, along the waveguide to multicast signals from a source to multiple receivers. The splitters need to be of sufficient thickness to provide mechanical integrity and ease of handling. As a result, passing through the thickness leads to a beam walk-off. Walk-off dependence on the splitter thickness and its effect on the system optical efficiency are investigated. Two methods to compensate the walk-off are described: by offsetting the outgoing waveguide, and by introducing an additional symmetric optical element to shift the beam back to the original optical path. Both methods have been shown to effectively mitigate the walk-off effects.  相似文献   

13.
Optical properties (transmission and refractive index) and phase change (from amorphous to crystal) of a commonly used glass, quartz, were investigated before and after focused ion beam (FIB) bombardment with ion energy from 30 to 50 keV. We found different influences of FIB bombardment on the optical properties and chemical structure of the quartz in the wavelength region of visible and near infrared, respectively. The quartz still can be used in the infrared wavelength for conventional optical applications. As an application example, an array of diffractive optical elements (DOEs) was directly fabricated on the quartz by the FIB milling. The measured diffraction efficiency of the DOEs is 83.5%, which is acceptable for practical use.This revised version was published online in March 2005. In the previous version, the published online date was missing  相似文献   

14.
Full control of spontaneous emission is essential in various fields of optics. This work presents an inverse designed light-emitting scattering optical element that includes full control of spontaneously emitted photons (i.e., enhancement at a central frequency and suppression at neighboring frequencies) and directionality of the output beam. This is achieved by embedding a one-dimensional optical active element inside a cluster of square shaped gallium arsenide dielectric rods whose positions are optimized by a genetic algorithm. Large spontaneous emission enhancement of > 70 is predicted at the transition wavelength if high-quality sources are employed. Moreover, neighboring wavelengths are simultaneously suppressed over 10 times. Finally, the radiated beam is highly collimated to only 6 degrees and contains 30 times the energy emitted by the source placed in free space.  相似文献   

15.
Optical clock signal distribution has been widely discussed to be an attractive way to reduce the clock skew in high-speed digital systems. For short interconnect lengths, especially for chip level clock distribution, free space systems using diffractive optical elements (DOEs) have specific advantages. The optoelectronic pathway described in this paper consists of a GaAs laser diode, a microetched silicon mirror, a faceted diffractive element and four silicon photodiodes hybridized to a (dummy) silicon chip. The key element of the clock distribution demonstrator is the diffractive element which matches setup requirements like compactness, off-axis geometry and use of an unshaped laser beam. The whole setup meets the demands of alignment accuracy in an excellent way. This is achieved by the very good imaging characteristic of the DOE and by an alignment technique based on precision mounting of micromachined silicon components. The system was tested with clock rates up to 2.5 GHz, the cut-off frequency is 350 MHz.  相似文献   

16.
利用边缘相位校正实现光束整形的高精度优化   总被引:2,自引:1,他引:1  
提出利用边缘相位校正的新方法,校正用追迹法设计的产生环形光束的衍射光学元件的相位分布,从而实现光束整形中的高精度优化。通过将高斯光束整形为环形光束,将该方法、G-S(Gerchberg-Saxton)算法和改进的G-S算法设计得到的整形结果作了比较,结果表明,G-S算法的整形结果虽然衍射效率最大,但是均方根值和最大偏差也太大;改进的G-S算法可以有效的降低均方根值和最大偏差,但衍射效率也有较大的下降;而用边缘相位校正可以在衍射效率略微下降的情况下,更大的降低均方根值和最大偏差,其整形结果是综合了衍射效率、均方根值和最大偏差这三个评价指标以后得到的最优化结果,已接近理想的环形光束。  相似文献   

17.
We give a review of the findings of an investigation into a photolithographical method of fabricating diffractive optical elements (DOEs), based on the use of only one photomask with two transmittance gradations. The binarization of the continuous transmission function of the diffractive element is conducted using a technology of half-toning of continuous-tone images and the exposure of the light-sensitive medium is performed using an incoherent spatial filtration in combination with a conventional photolithographical process. We analyze how the DOE diffractive efficiency depends on photomask parameters, binarization methods and fabrication errors. Comparison of the characteristics of the method proposed with the well-known multilevel method is made. Peculiarities of fabricating DOEs with continuous phase profile resulting from the projection, contact, and X-ray lithography are discussed. The results of experimental research are given. A possibility of fabricating DOEs with an 80% diffractive efficiency using only one photomask is demonstrated.  相似文献   

18.
A wave field of a structurally stable diffraction caustic that is formed upon focusing of a collimated laser beam with the help of a two-component crystal-optics element consisting of uniaxial crystals is characterized by a crystal-like cellular structure. Near the cusp of this caustic (diffraction catastrophe), a well-pronounced localized quadrupole optical vortex is observed that consists of four isolated vortices with pairwise opposite topological charges of −1, +1, +1, and −1. The creation and annihilation points of this combined quadrupole vortex are determined. Upon reversal of the direction of propagation of the laser beam through the crystal-optics element, the caustic in the focal region has already become a binary combination and inhomogeneously polarized, and a second-order optical vortex is observed near the cusp of this caustic.  相似文献   

19.
针对惯性约束聚变(ICF)终端光学系统对元件数量及厚度的限制,利用衍射光学元件(DOE)易于集成的优点,可将终端光学系统中实现不同功能的DOE元件集成于一体,以优化系统的结构和性能.为了对ICF终端光学系统集成光学元件在强激光条件下的正常运行提供分析的依据,采用傅里叶模式理论分别对色分离光栅(CSG)和色分离光栅-光束取样光栅(CSG-BSG)集成光学元件内部的近场调制特性进行了模拟计算.计算发现,将CSG与BSG集成以后其每一层的最大调制度比集成以前小10%—47%,但其激光诱导损伤风险和单个CSG一样 关键词: 色分离光栅-光束取样光栅集成光学元件 激光诱导损伤 惯性约束聚变 傅里叶模式法  相似文献   

20.
A very simple and stable interferometer using a single optical element - a beam-splitter cube - is presented. The device resembles a two-arm interferometer in which the arms are together in one collimated beam, and the two beam halves interfere with the help of the beam-splitter cube. The proposed device produces simultaneously two interferograms with a relative phase-shift of π (rad). Since the period of straight interference fringes can be stably controlled, the device has potential application in spatial-carrier interferometry and for flexible writing of fiber Bragg gratings.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号