Synthesis and optical properties of CuS nanoplate-based architectures by a solvothermal method

The controlled synthesis of copper sulfide (CuS) nanoplate-based architectures in different solvents has been realized at low cost by simply reaction of Cu(NO₃)₂·3H₂O and S under solvothermal conditions without the use of any template. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-vis spectrometer and fluorescence measurement were used to characterize the products. The products were all in hexagonal phase with high crystallinity and the morphology was significantly influenced by the solvents. The CuS products synthesized in dimethylformamide (DMF) were nanoplates and the samples prepared in ethanol were flower-like morphology composed of large numbers of nanoplates, but those synthesized in ethylene glycol (EG) were CuS architectures with high symmetry made up of several nanoplates arranged in a certain mode. The optical properties were investigated and the growth mechanisms of these CuS crystals were also proposed.     

Hydrothermal preparation and characterization of Cd0.9Mn0.1S nanorods

Cd_0.9Mn_0.1S semiconductor nanorods were successfully prepared by the hydrothermal reaction of CdCl₂·2.5H₂O and MnCl₂·5H₂O with (NH₄)₂S in aqueous solution. Atomic absorption spectrometry (AAS) and energy dispersive spectroscopy (EDS) were used to determine the Mn contents of these complex nanorods. The samples were characterized by scanning electron microscopy (SEM-EDS), X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-vis absorption spectra, photoluminescence (PL) and compared with the undoped CdS nanorods. The results showed that nanostructured multiplex compounds with high aspect ratio were obtained via hydrothermal method. The products showed almost totally rod-like morphology with approximately identical diameter about 20 nm and the maximal length up to 200 nm.     

Simple routes to synthesis and characterization of nanosized tin telluride compounds

Nanosized tin telluride compounds were prepared by chemical reduction process and hydrothermal methods. The nanosized SnTe compounds were characterized by means of X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The SnTe nanoalloy prepared by chemical reduction process presented quasi-spherical morphology with aggregation. The sizes of particle were 40-50 nm. The powder prepared by hydrothermal process was nearly nanospheres, and the particle sizes were 30-40 nm with narrow distribution. The effect of capping agent, reductant sort, and reaction temperature on the morphology, the particle sizes and the phase of SnTe alloys have been investigated. Experimental results indicated that N₂H₄·H₂O plays a crucial role in the formation of nanosized rode-like SnTe compounds.     

Characterizations of octahedral zinc oxide synthesized by sonochemical method

The ultrasonic reaction of zinc nitrate hexahydrate (Zn(NO₃)₂·6H₂O) and hexamethylenetetramine (C₆H₁₂N₄) was investigated by varying the concentration of the reactants, the irradiation time, and the type of sonicator. The morphology, composition, and phase structure of the products were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier Transform Infrared (FTIR) and ultraviolet-visible (UV-vis) spectroscopy. Octahedral zinc oxide (ZnO) micropowders were formed at low concentrations, 0.05 M, of Zn(NO₃)₂·6H₂O and C₆H₁₂N₄ in both lab-made sonicator and commercial ultrasonic bath. However, at concentrations between 0.1 and 1.0 M Zn(NO₃)₂-C₆H₁₂N₄ mainly plate-like zinc hydroxide nitrate hydrate (Zn₅(OH)₈(NO₃)₂(H₂O)₂) resulted with only a small fraction of ZnO, irrespective of the irradiation time employed, highlighting the sensitivity of the system to the concentration of the starting materials. Heat treatment of Zn₅(OH)₈(NO₃)₂(H₂O)₂ at 350 °C in air affords a ZnO phase of irregular morphology. Octahedral ZnO is found to exhibit slightly lower IR absorption and similar UV absorption to that of commercial prismatic hexagonal ZnO, although an extra peak due to small quantities of Zn₅(OH)₈(NO₃)₂(H₂O)₂ is observed.     

Preparation and characterization of SnO nanowhiskers

In this paper, some single-crystalline Stannous oxide (SnO) nanowhiskers were successfully prepared by a wet method using SnCl₂·2H₂O as raw material and cetyltrimethylammoniumbromide (CTAB) as surfactant. The morphologies, purity and sizes of the products were characterized by transmission electron microscopy, powder X-ray diffractmetry and standard selected area electron diffraction. The results showed that the diameter and the length of the particles were 10-30 and 200-400 nm, respectively. The influence of some reaction parameters, including the pressure, the temperature, the surfactant and the reaction duration, on the formation, morphology and particle size of SnO crystallite is discussed.     

Chondroitin sulfate template-mediated biomimetic synthesis of nano-flake hydroxyapatite

By Ca(NO₃)₂·4H₂O and (NH₄)₃PO₄·3H₂O as reagents and chondroitin sulfate (ChS) as a template, nano-flake hydroxyapatite (HA) is synthesized using a biomimetic method according to the biomineralization theory. HA crystals obtained are characterized in crystalline phase, microstructure, chemical composition and morphology by X-ray diffraction (XRD), Fourier transform infrared spectroscope (FTIR), transmission electron microscopy (TEM) and elemental analysis respectively. UV-vis spectrum is adopted to investigate interactions between functional groups ChS and HA. The results show that HA crystal nucleation and growth take place in chemical interactions between HA crystals and ChS as a template. And elemental analysis indicates that obtained HA contains a small amount of ChS. Furthermore, ChS concentration significantly affects the morphology of HA crystals. Staple-fiber-like HA crystals can be obtained at a low concentration in ChS, and flake-like HA crystals synthesized at a high concentration (≥0.5 wt.%) of ChS as a template.     

Synthesis of quasi-1D cuprous oxide nanostructure and its structural characterizations

A wealth of superfine polycrystalline cuprous oxide (Cu₂O) nanowires have been synthesized with hydrazine hydrated (N₂H₄·H₂O), act as the reducing agent, and Cu(OH)₂ nanowires, act as a soft template and surfactant, at room temperature. Two methods were employed for the synthesis of these nanowires, i.e. with and without capping agent (polyethylene glycol Mw 8000). Techniques of powder X-ray diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED) pattern, electron diffraction X-ray (EDX) spectroscopy, and UV-visible (UV-vis) spectroscopy have been used to characterize the morphology, structure, crystallinity, purity, and composition of nanowires. The average diameters of Cu₂O nanowires, prepared with and without capping agent, were observed to be 8-10 and 12-15 nm and lengths of several microns, respectively. It is found that capping agent (PEG) confines the dimensions of synthesized nanowires. In addition, the observed optical band gap of products show blue-shift effect compared to the bulk Cu₂O (E_g=2.17 eV), which ascribe it as a promising material for the conversion between solar energy and electrical or chemical energy.     

Hydrothermal synthesis and characterization of nanocrystalline Zn-Mn spinel

Hydrothermal method had been used to successfully synthesize the nanocrystalline spinel zinc manganese oxide (ZnMn₂O₄) directly from Zn(CH₃COO)₂·2H₂O, NaOH, Mn(NO₃)₂ and H₂O₂ at 170 °C for the reaction time of 48 h. The effects of the synthesis conditions, such as the Zn/Mn molar ratio, the reaction temperature, the reaction time, the zinc source and the concentrations of NaOH and H₂O₂, on the formation of the Zn-Mn spinel were investigated. The products were characterized by means of X-ray diffraction (XRD), inductively coupled plasma-atomic emission spectroscopy (ICP-AES). The results indicated that the compositions of the Zn-Mn spinel with the tetragonal structure were Zn_1.14Mn_1.86O₄. Scanning electron microscope (SEM) and transmission electron microscopy (TEM) images showed that the products at 170 °C were with square-shaped nanocrystalline spinel with the particle size of about 20-50 nm. The thermal behaviors of the products were investigated by thermogravimetric analysis (TG).     

Direct synthesis of beta gallium oxide nanowires, nanobelts, nanosheets and nanograsses by microwave plasma

In this study, beta-gallium oxide (β-Ga₂O₃) nanowires, nanobelts, nanosheets, and nanograsses were synthesized through microwave plasma of liquid phase gallium containing H₂O in Ar atmosphere using silicon as the substrate. The nanowires with diameters of about 20-30 nm were several tens of microns long and the nanobelts with thickness of about 20-30 nm were tens to hundreds of microns long. The morphology and structure of products were analyzed by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM) and X-ray diffraction (XRD). These results showed that multiple nucleation and growth of β-Ga₂O₃ nanostructures could easily occur directly out of liquid gallium exposed to appropriate H₂O and Ar in the gas phase. The growth process of β-Ga₂O₃ nanostructures may be dominated by VS (vapor-solid) mechanism.     

Synthesis of basic magnesium carbonate microrods with a “house of cards” surface structure using rod-like particle template

Basic magnesium carbonate (Mg₅(CO₃)₄(OH)₂·4H₂O) microrods with a surface structure of “house of cards” have been synthesized without any alkaline reagent, using rod-like particles, magnesium carbonate trihydrate, as templates. The product was characterized by X-ray diffraction (XRD) and field-emission scanning electron microscopy (FE-SEM). The transformation process from rod-like MgCO₃·3H₂O particles to Mg₅(CO₃)₄(OH)₂·4H₂O microrods with a surface structure of “house of cards” was recorded. Preliminary discussions on possible growth mechanisms of Mg₅(CO₃)₄(OH)₂·4H₂O microrods are also proposed in this paper.