首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到18条相似文献,搜索用时 125 毫秒
1.
一种超声速运动目标的被动声定位算法   总被引:1,自引:0,他引:1       下载免费PDF全文
石践  万建伟  周良柱 《应用声学》1998,17(5):40-43,10
超声速运动目标在空气中飞行时产生激波,本文利用激波到达时间,提出了一种基于波前方向矢量的算法,确定目标的速率和位置。最后,通过对三站均匀圆阵的估计精度的分析计算,讨论了该算法的有效性。  相似文献   

2.
江娟  周伟江  马汉东 《计算物理》2003,20(4):315-320
用数值方法求解非定常可压缩Navier-Stokes方程,模拟了物体以超音速穿越与之同向运动激波及逆向运动激波的全过程.为确保数值模拟中的激波和物体的相对运动有足够的网格分辨率,使用了统一分区加强解算法,详细给出了追击穿越和碰撞穿越的流场结构和气动力,并且通过和单区结果的对比,说明统一分区加强解算法是一种处理复杂几何外形和提高网格分辨率的简单有效方法.  相似文献   

3.
对差分干涉计算机层析技术诊断激波加载下气柱界面不稳定性的可行性进行初步理论和实验研究。针对有限投影数的联合代数重建算法,提出了一种新的投影矩阵计算方法,采用特定投影方向,各投影方向具有不同采样间隔。投影方向的对称性和投影线的规律性使计算过程大为减化。用该重建算法对气柱密度场进行数值模拟,结果表明4方向投影能够重建激波作用下气柱演化初期的体密度场,8方向投影基本能够重建演化中期的体密度场。用差分干涉系统对激波管气柱进行3方向诊断的实验结果表明,差分干涉计算机层析技术用于激波冲击下的气柱不稳定性密度场诊断是可行的。  相似文献   

4.
聚心火焰在共振腔作用下引发爆轰的数值研究   总被引:1,自引:0,他引:1       下载免费PDF全文
 基于带化学反应的二维轴对称Euler方程,利用带有Superbee限制函数的波传播算法,对共振腔中的氢气-空气预混气的聚心燃烧进行了数值模拟,讨论了共振腔不同抛物面对起爆的影响。数值结果表明,在开始阶段,燃烧诱导的激波在轴心、火焰和固壁的反射,使火焰失稳,随后共振腔中的抛物壁面上产生一定频率和强度的反射激波,不断穿越火焰,使火焰进一步失稳,加剧了燃烧速度,最终导致爆轰的形成。同时,火焰在与激波的作用过程中,形状扭曲变形,呈封闭端小敞口端大的扁平头部蘑菇云。共振腔抛物面的不同形状引起激波聚焦位置的变化,会影响激波和火焰的相互作用,使起爆提前或推迟,甚至不起爆。  相似文献   

5.
基于波传播算法的火焰不稳定性   总被引:3,自引:0,他引:3  
基于波传播算法构造了多组分反应流的数值格式,利用CH4空气基元反应动力学模型,并采用分离算法,对CH4空气混合物中,入射激波与火焰的相互作用,以及反射激波与火焰的二次作用过程进行了数值模拟.根据计算结果,讨论了激波诱导火焰失稳的发展过程及其特点.结果表明,Helmholtz不稳定、RichtmyerMeshkov不稳定以及反应放热速率对火焰失稳过程有重要影响.计算结果与实验结果进行了比较,对数值方法的有效性进行了验证.  相似文献   

6.
激波与颗粒的相互作用广泛存在于超音速两相流中,具有十分重要的研究意义和价值。本文将内嵌边界方法与高精度激波捕捉格式WENO结合,模拟了激波强度Ms为2.81和1.3的激波与圆柱相互作用的过程。计算结果与文献值吻合较好,验证了本文算法的准确性。通过将上述两个案例对比,发现激波强度对于流场结构有十分重要的影响。除此之外,本文还发现圆柱表面受到的压力不稳定,其最大值出现在入射激波到达圆柱赤道之前,数值要高出稳态值很多倍。  相似文献   

7.
为了研究入射激波变化的隔离段内激波串的运动特性,设计并搭建了直连式变Mach数实验系统,捕捉了相同来流Mach数变化速率、不同背压变化速率下激波串的运动行为,揭示了入射激波与背压同时变化对激波串运动的影响机理。入射激波与背压同时变化时,共有3个方面的因素会影响激波串整体的上下游运动趋势,其一,Mach数变化,Mach数增大导致激波串向下游运动,该影响随Mach数增大逐渐减弱;其二,背景波系移动,背景激波反射点靠近激波串前缘时,可能引起激波串的突跳;其三,背压压比变化,背压压比增大时激波串向上游运动,该影响随背压压比增大逐渐增强。三方面因素共同作用下激波串表现出复杂的运动。   相似文献   

8.
高超声速飞行器激波位置的准确预测能够有效提升数值模拟的精度和效率。一方面, 对高超声速飞行器激波附近网格进行正交和加密处理, 可有效提升数值计算精度; 另一方面, 使用高超声速飞行器激波位置对计算网格进行修正, 能够加速CFD计算收敛过程。提出了一种基于机器学习的高超声速飞行器激波智能预测方法, 对典型高超声速飞行器外形进行激波位置的高效准确预测。首先, 针对典型高超声速飞行器外形和典型飞行状态, 使用数值模拟方法获得收敛的流场, 并采用基于Mach数等值线的激波提取方法, 从流场中判别激波面并提取构成激波面的关键点位置, 形成训练数据; 然后采用有监督学习算法, 学习关键点位置, 并利用二次曲线沿流向拟合关键点形成初步的激波线族; 最后, 基于剖面压力云图, 构造基于投影压力图像的智能预测神经网络, 对初步形成的激波线族进行修正, 并获得三维激波面。大量的实验结果表明, 激波预测模型能够对高超声速飞行器激波位置做出准确预测, 预测的激波面与CFD数值计算结果中提取的激波面误差在10-4量级。   相似文献   

9.
激波聚焦反射的实验和数值研究   总被引:1,自引:0,他引:1       下载免费PDF全文
 采用高速摄影技术和数值模拟方法,对入射激波在两种不同形状的抛物形反射器表面聚焦和反射的过程进行了研究,得到了激波聚焦反射过程的波系结构的实验阴影照片和数值计算结果,两者符合得很好。对激波聚焦形成的气体动力学焦点的特性进行了分析,结果表明,入射激波在两种反射器反射后聚焦所形成的气体动力学焦点均是由三波点在轴心处的会聚所导致的,气体动力学焦点位于相应的反射器壁面的几何焦点附近。不同的反射器中,激波聚焦前后的波系结构也不同,对较浅的反射器,入射激波反射前在反射器壁面形成了弓形激波,反射之后需要相对较长的时间完成聚焦,形成聚焦反射激波之后弓形激波仍未相交;对较深的反射器,入射激波反射后在更短的时间内聚焦,聚焦时弓形激波已经相交,聚焦反射激波之后的流场波系结构更加复杂。  相似文献   

10.
基于非结构变形网格的间断装配法原理   总被引:1,自引:0,他引:1       下载免费PDF全文
在激波捕捉法计算得到的流场基础上采用辨识算法得到初始间断位置, 从ALE方程出发, 考虑离散几何守恒律, 采用变形网格和网格重构技术解决计算过程中间断运动和变形, 新旧网格之间流场采用高精度信息传递方法保持时间精度, 建立了基于非结构动网格技术的间断装配方法.通过激波管问题的二维模拟, 模拟了初始间断分解为激波和接触间断激波遇到固壁反射后与接触间断相交的非定常流动过程, 对这种新方法的基本原理进行了介绍.   相似文献   

11.
Ai J  Wang LV 《Optics letters》2005,30(21):2939-2941
We have developed a new algorithm and configuration for self-eliminating the autocorrelation of the object wave in Fourier-domain optical coherence tomography. A self-interferogram of the object wave is acquired synchronously with the standard interferogram of the recombined object and reference waves. The former is then subtracted from the latter after Fourier transformation. The algorithm is validated by numerical simulation and by experimental measurement of a U.S. Air Force target and a feline eye.  相似文献   

12.
The impulse wave is made by the weak normal shock discharge from an open end of a shock tube. In order to understand the dynamic characteristics of the impulse wave impinging upon a flat plate, experiments are performed over the shock Mach number range from 1·01 to 1·20. A flat plate is placed downstream, normal to the axis of the shock tube, to simulate the impulse wave impingement on an object. The distance between the exit of the shock tube and flat plate is changed. The baffle plate is installed at the exit of the shock tube. The sizes of the baffle plate and impinging flat plate are varied to investigate the magnitude of the impulse wave impinging upon the flat plate. Computational analysis is applied to model the flow field subject to unsteady, axisymmetric, inviscid, compressible, equations. Computational results well predict the experimented dynamic behavior of the impinging impulse wave. The impulse wave impinging upon the flat plate has a sharp peak of very short rising time and its magnitude decreases with distance from the center of the flat plate. The magnitude of the impulse wave impinging upon the flat plate can be predicted by the empirical equations that are developed in the present study.  相似文献   

13.
The results of the theoretical analysis and computer simulation of the behavior of neutrally stable shock waves with real (van der Waals gas, magnesium) equations of state are presented. An approach is developed in which the region of the neutral stability of a shock wave for each pressure value in front of the wave is determined from the analysis of the equation of state. A simple algorithm is developed to determine the cause of acoustic perturbations (a shock front or an external source) immediately from the flow pattern. In contrast to the predictions of the linear theory, the amplitude of the perturbations of the neutrally stable shock wave decreases with time, although this process is noticeably slower than in the case of an absolutely stable shock wave.  相似文献   

14.
含冲击波流场干涉图的图像处理方法研究   总被引:2,自引:1,他引:1  
阎大鹏  朱兆清 《光学学报》1993,13(5):39-443
本文研究了含冲击波流场干涉图的图像处理方法,它包括干涉条纹的快束细化算法,冲击波波阵面的提取算法和时间序列冲击波波阵面的配准算法.根据这些算法,在PC-VISION 100图像处理机上开发了应用软件.实验结果表明,该方法可用于定量计算冲击波的传播速度和压力分布,增加了流场干涉图的用途.  相似文献   

15.
An algorithm to extract the arbitrary unknown phase shift and then reconstruct the complex object wave in generalized phase-shifting interferometry (GPSI) without the iteration process and measurement of object wave intensity is proposed. This method can be used for GPSI of any frame number >or=2. Both computer simulations with smooth and diffusing object surfaces and optical experiments have verified the effectiveness of this method over a wide range of phase shifts with very satisfactory results.  相似文献   

16.
The phase retrieval from a modulus of the scattered wave field at the Fourier transform plane of an object is considered in this paper by using the logarithmic Hilbert transform. When the phase is evaluated by using the logarithmic Hilbert transform from the modulus at the Fourier transform plane of the object with the direct component (for example, the phase object), the distortion appears in the reconstructed object obtained from an inverse Fourier transform of the complex wave consisting of the evaluated phase and the modulus. Here, the cause for the appearance of the distortion is made clear and a simple algorithm is presented to reduce the distortion of the reconstructed object.  相似文献   

17.
C. Quan  C.J. Tay 《Optics Communications》2011,284(12):2767-2770
We propose an approach based on axial translation of a charge-coupled device (CCD) and gradient operator method for numerical reconstruction in in-line digital holography. The object wave in the hologram (or CCD) plane is determined using one position translation of CCD, and a phase-shifting device can be fully avoided. Gradient operator method is further applied to detect the focal plane of an object, and the object wave is reconstructed by an angular spectrum algorithm with the detected focal distance. The feasibility and effectiveness of the proposed method are demonstrated by numerical simulations.  相似文献   

18.
在团簇多重标号技术基础上,提出了团簇探测的新算法,并以此作为大尺度二维和三维分子动力学模拟冲击加载金属材料微喷射粒子团簇分析的子程序.以二维为例描述了算法的逻辑结构,测试分析了算法的运行效率,并将其应用到二维分子动力学模拟冲击加载金属Cu和Al微喷射粒子的团簇统计分析中,对微喷射粒子团簇尺寸分布得到一些规律性认识.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号