基于光子散射的功能成像技术

阐述了基于光子散射模型下的功能成像技术.运用蒙特卡罗方法对光子在介质中的散射路径进行了模拟和分析,从而引入光子散射的概念.通过对光子散射方程的解释引入了散射光子密度波的概念.通过无限大模型下光子密度波的波方程,引出光子密度波的异质模型.建立了基于消元的奇异值弱化重建算法,完成了对病态方程的求解,实现了对内嵌于均匀介质中异质的吸收系数分布图像的重建.在基于光散射成像技术所开发的成像系统平台下实现了异质小球的成像实验,对多个不同浓度的物体完成了成像,探测到介质中由于微小浓度改变而引起的吸收系数变化.     

基于激光等离子体的光子加速

利用一维动量方程、连续性方程和泊松方程,导出了由于短脉冲激光入射到稀薄等离子体中 而引起的电子密度扰动,它与入射激光密切相关.而密度扰动的传播形成电子等离子体波(尾 波场).利用光学度规的方法,研究了与驱动激光脉冲入射相距一定空间距离入射的尾随激光 脉冲由于尾波场的作用引起的光子频率的增大.结果表明,在一定条件下,入射到尾波场中 的光子可以从尾波场中获得能量,在光子总数不变时,光子频率会增大,光子获得加速. 关键词： 电子密度扰动 光学度规 光子加速     

太赫兹波段三角晶格二维光子晶体的传输特性

用平面波展开法研究了太赫兹(THz)波在二维三角晶格光子晶体中的传输特性。数值计算了以硅为背景的空气圆柱构成的二维三角晶格光子晶体的能带结构和态密度,计算表明在介质圆柱半径r=0.47a(a为空气介质柱的晶格常数)出现最大完全光子带隙,带隙宽度为0.070 1 THz;当r=0.49a和r=0.45a时,E偏振和H偏振分别出现最大光子带隙,带隙宽度分别0.102 2,0.192 3 THz。光子晶体能态密度的分布也表明了存在光子带隙的范围。研究结果为THz器件的开发提供了理论依据。     

激光二极管抽运Nd∶YVO_4和频黄光激光器的理论及实验研究

为了达到最佳和频593nm黄色激光输出,采用激光二极管(LD)端面抽运Nd∶YVO4晶体,根据四能级系统的速率方程理论,建立了空间相关的两波长激光运转速率方程模型,由此导出两波光子数表达式。对LD端面抽运Nd∶YVO4/KTP三镜复合腔结构的腔内和频黄光激光器,在满足参与和频的两基频光光子数密度相等的条件下,理论上得到了谐振腔的各个参数。实验比较了在满足两波光子数密度相等和两波振荡阈值相等两种情况下激光器输出的593nm黄色激光功率。在抽运功率为12W时,二种情况下分别得到了410mW和340mW的黄光输出,光-光转换效率分别为3.4%和2.8%。由此可见,在满足两波光子数密度相等的条件下可以得到更高转换效率的和频黄光输出。     

激光二极管抽运Nd:YV04和频黄光激光器的理论及实验研究

为了达到最佳和频593 nm黄色激光输出,采用激光二极管(LD)端面抽运Nd:YVO4晶体,根据四能级系统的速率方程理论,建立了空间相关的两波长激光运转速率方程模型,由此导出两波光子数表达式.对LD端面抽运Nd:YVO4/KTP三镜复合腔结构的腔内和频黄光激光器,在满足参与和频的两基频光光子数密度相等的条件下,理论上得到了谐振腔的各个参数.实验比较了在满足两波光子数密度相等和两波振荡阈值相等两种情况下激光器输出的593 nm黄色激光功率.在抽运功率为12 W时,二种情况下分别得到了410 mW和340 mW的黄光输出,光一光转换效率分别为3.4%和2.8%.由此可见,在满足两波光子数密度相等的条件下可以得到更高转换效率的和频黄光输出.     

Ku波段光子晶体加载曲折波导慢波结构

研究了Ku波段光子晶体加载曲折波导慢波结构的色散特性和耦合阻抗。用电磁仿真软件CST MWS进行了仿真, 讨论了慢波结构外光子晶体对慢波通道内电磁波的选择通过性。对具有相同结构尺寸慢波结构的研究结果表明:光子晶体加载慢波结构的色散比传统曲折波导慢波结构的色散低;和传统曲折波导慢波结构相比,光子晶体加载曲折波导慢波结构的耦合阻抗略高。     

光子晶体超窄带滤波器

本文利用光学传输矩阵法研究了一种类似于谐振腔结构的光子晶体.研究发现在这种光子晶体的光子带隙的中央存在一个极窄的透光窗口,窗口的宽度在红外波段1500nm附近可以做到0.0001nm以下,窗口内的透光率峰值可以接近100%,窗口以外的区域的透光率可以做到0.01%以下.通过改变所研究结构中的周期厚度、中间夹层厚度、两边光子晶体的周期重复数和波的入射角可以改变窄带透过窗口的位置和窄带的宽度.这种光子晶体可以用来制作超窄带滤波器,有望在光通信超密度波分复用技术和光学信息精密测量技术当中获得应用.     

适用于毫米波带状束行波放大器的光子晶体栅慢波电路研究

提出了一种适用于毫米波及THz波行波放大器的光子晶体栅慢波电路,即横向分布光子晶体栅慢波电路,并提出了分析和设计此类光子晶体栅慢波电路的方法.通过计算光子晶体TE极化的带隙和在带隙内将光子晶体栅慢波电路等效为矩形栅波导慢波电路,从而,光子晶体栅慢波电路的设计得以分为两步独立进行,从而简化了光子晶体栅慢波电路的设计.对横向分布光子晶体栅慢波电路进行了设计和计算,结果表明,与矩形栅波导慢波电路相比,横向分布光子晶体栅慢波电路可以降低工作电压并增加带宽,从而可以降低成本. 关键词： 行波放大器 光子晶体 毫米波 慢波电路     

光子晶体对太赫兹波的调制特性研究

利用传输矩阵方法研究了掺杂半导体n-GaAs/聚碳酸脂一维光子晶体的太赫兹波透射谱.研究结果发现,与一般由两种介电材料组成的一维光子晶体不同,由于掺杂半导体中自由载流子对太赫兹波存在较强的吸收,所以这种材料组成的一维光子晶体除可形成光子带隙外,还可以增强n-GaAs对太赫兹波的透射.同时还提出了一种基于这种一维光子晶体的太赫兹波调制器,通过外加电压控制半导体中电子浓度的大小可实现对太赫兹透射波幅度的调制. 关键词： 掺杂半导体光子晶体 太赫兹波 太赫兹波的调制     

等离子体填充金属光子晶体Cherenkov辐射源模拟研究

等离子体填充能够明显提高真空电子器件的效率和功率, 研究等离子体填充器件具有重要的科学价值. 本文基于对等离子体填充金属光子晶体慢波结构色散特性的分析, 利用粒子模拟方法展示了等离子体填充慢波结构中的注波互作用过程. 重点研究了慢波结构中场分布特性、等离子体密度和外部工作条件对频率及输出功率的影响. 研究发现, 填充一定密度等离子体后, 慢波结构内纵向和横向电场强度明显增大, 注波互作用增强, 输出频率受等离子体影响不大. 金属光子晶体结构具有的频率选择特性使器件工作于TM₀₁模态. 阴极电压增加使输出功率增大, 频率略有增加. 引导磁场增加使输出功率先增大后减小, 而频率基本不受影响. 等离子体填充后器件的输出功率上升, 当增加压强至100 mTorr(1 mTorr=0.133 Pa) 时, 输出功率提高约20%, 但只有适当密度下才有较好的角向场分布. 通过理论与模拟相结合, 发现填充一定密度的等离子体能够提高器件输出功率和效率, 为发展新型高功率毫米波振荡辐射源奠定了理论和仿真基础.     

从双缝实验看干涉和衍射的本质

以双缝为例,从装置图、实验照片和光强度分布入手,讨论了双缝干涉与双缝衍射的区别和联系,从而较深入地探讨了光波干涉与衍射的本质.     

Lensing effects in a nematic liquid crystal with topological defects

Light traveling through a liquid crystal with disclinations perceives a geometrical background which causes lensing effects similar to the ones predicted for cosmic objects like global monopoles and cosmic strings. In this paper we explore the effective geometry as perceived by light in such media. The comparison between both systems suggests that experiments can be done in the laboratory to simulate optical properties, like gravitational lensing, of cosmic objects.     

布儒斯特角切割LiNbO3晶体的偏振态分析

基于琼斯矩阵和菲涅耳公式,建立了偏振光透过LiNbO3晶体的分析模型,研究了入射光偏振态、晶压等参数对输出光偏振态和p偏振态、s偏振态透射率的影响规律。搭建了分别含单块LiNbO3晶体、LiNbO3晶体和薄片、两块串联LiNbO3晶体的Ho,Tm,Cr:YAG激光电光调Q实验装置,并测得了输出激光的偏振态、输出能量等随晶压的变化关系曲线。     

Heterodyne schlieren system

A new heterodyne technique for the quantitative analysis of schlieren images is described. The technique is based on phase measurements of signals generated by a photodetector observing the variations in light intensity caused by a traveling grating of slits located at the knife-edge plane of a conventional schlieren system. The phase of the signal is proportional to the displacement of the slit image on the knife-edge plane as a result of the light deflection passing through a phase object. The displacement is proportional to the ray deflection angle and hence to the local gradient of the index of refraction. The technique, which is quantitatively precise and sensitive, is demonstrated by measurement of deflections caused by a lens with a focal length of f = 20 m. A displacement of 0.22 mm and a deflection of an angle of 5.2 x 10(-4) rad were detected.     

红外激光技术在运动物体位置跟踪系统中的应用

运动物体位置跟踪系统可用工作在红外波段的激光 ,测量“调制光波”往返于被测距离上相位差的方法来测定距离。利用 DSP鉴相技术 ,通过快速傅立叶变换软件可快速实时测量运动物体的距离及其运行速度。该系统能极其准确地显示运动物体的实际位置 ,实现对运动物体速度的数字化控制。     

Wavefront Shaping for Fast Focusing Light through Scattering Media Based on Parallel Wavefront Optimization and Superpixel Method

When light travels in biological tissues,it undergoes multiple scattering and forms speckles,which seriousl.y restricts the penetration depth of optical imaging in biological tissues.With wavefront shaping method,by modulating the wavefront of incident light to compensate for the wavefront aberration,light focusing and scanning imaging through scattering media can be achieved.However,wavefront shaping must be accomplished within the speckle decorrelation time.Considering the short speckle decorrelation time of living tissues,the speed of wavefront shaping is rather essential We propose a new iterative optimization wavefront shaping method to improve the speed of wavefront shaping in which the existing parallel optimization wavefront shaping method is improved and is combined with the superpixel method.Compared with the traditional multi-frequency parallel optimization method,the modulation rate of our method is doubled.Moreover,we combine the high frame rate amplitude modulator,i.e.,the digital micromirror device(DMD),with the superpixel method to replace the traditional phase modulator(i.e.,spatial light modulator),which further increases the optimization speed.In our experiment,when the number of the optical modes is 400,light focusing is achieved with only 1000 DMD superpixel masks and the enhancement factor reaches 223.Our approach provides a new path for fast light focusing through wavefront shaping.     

Acoustical power amplification and damping by temperature gradients

Ceperley proposed a concept of a traveling wave heat engine ["A pistonless Stirling engine-The traveling wave heat engine," J. Acoust. Soc. Am. 66, 1508-1513 (1979).] that provided a starting point of thermoacoustics today. This paper verifies experimentally his idea through observation of amplification and strong damping of a plane acoustic traveling wave as it passes through axial temperature gradients. The acoustic power gain is shown to obey a universal curve specified by a dimensionless parameter ωτα; ω is the angular frequency and τα is the relaxation time for the gas to thermally equilibrate with channel walls. As an application of his idea, a three-stage acoustic power amplifier is developed, which attains the gain up to 10 with a moderate temperature ratio of 2.3.     

Wave propagation of Rabi oscillations in one-dimensional quantum dot chain

Interaction of traveling wave of classic light with 1D-chain of coupled quantum dots (QDs) in the strong coupling regime is theoretically considered. The effect of space propagation of Rabi oscillations in the form of traveling waves and wave packets is predicted introducing thus a new family of quasi-particles. Physical interpretation of the effect is given and principles of its experimental observation are discussed.