共查询到20条相似文献,搜索用时 93 毫秒
1.
2.
3.
4.
HIRFL-CSR电子冷却束流位置测量系统 总被引:1,自引:0,他引:1
高效率的电子冷却过程,要求电子束与离子束位置平行且重叠。为了同时测量电子束与离子束的位置,在HIRFL-CSR电子冷却装置上研发了以容性圆筒形极板为感应电极的束流位置探测系统。系统测量束流通过探针时产生的脉冲感应信号,并进行傅里叶变换得到频谱信号,分析4个不同电极上频谱信号强度获取束流的位置信息。测量结果表明,该束流位置探测系统测量准确,为定量研究储存环离子累积和电子冷却过程与两种束流相对位置及角度的依赖关系提供了条件。 相似文献
5.
武威和兰州重离子加速器使用回旋加速器作为其注入器。回旋加速器为该装置的同步加速器提供10μA的碳离子束流以满足其物理需求。而径向探针则是安装在回旋加速器内部实现束流流强和圈图测量的重要束诊元件。径向靶头上的束流信息经前端电子学拾取后会进一步进入数据采集系统,最终实现回旋加速器的束流流强和圈图测试。其中,径向探针的前端电子学采用皮安表,数据采集系统基于实时操作系统和FPGA技术。介绍了径向探针的机械结构设计,并分析了探头有无水冷结构的热结构;描述了控制系统软硬件架构,可以实现10 kHz的数据和位置信息的同步采集。最后,还介绍了探针机械和控制系统的实验室测试和验收标准以及在束测量结果。 相似文献
6.
报道了工作点测量技术的研究现状,对束流频谱分析用于工作点测量的方法进行了详细说明。介绍了上海光源储存环工作点测量系统的物理需求、方案设计、硬件结构及关键设备选型。采用束流实验的方法对系统配置参数进行优化,对系统测量误差及分辨力进行测试评估,讨论了测量系统不同工作模式的优缺点,并给出加速器不同运行阶段应该采用的运行模式。优化后的上海光源工作点测量系统,其系统测量误差小于0.000 1,测量分辨力好于0.000 05,测量过程对束流轨道及等效束斑尺寸的扰动控制在μm量级,现已在上海光源运行及机器研究中投入实用。 相似文献
7.
8.
合肥光源升级改造任务已基本完成,注入器实现满能量注入。为适应新的注入器束流强度的测量需求,设计了新的注入器束流强度测量系统,该系统利用安装在真空腔上的3个快速束流变压器(FCT)和2个积分束流变压器(ICT),能够实现束流流强和电荷量的非拦截实时测量。为了准确获取束流参数,首先对束流变压器(CT)传输电缆进行了在线和离线标定;由于ICT输出信号信号幅度较小,噪声大,设计了低噪声前置放大器以改善信噪比;考虑低频谐波噪声和Kicker噪声的干扰,软件中通过适当的算法对噪声进行了处理;最后给出了部分在线实验结果。实验结果表明,束流传输效率约为27.4%,注入效率约为44.3%。 相似文献
9.
介绍了利用二次电子发射测量束流强度分布的基本原理。针对能量为几十keV的低能离子束,制作了一个基于印刷线路板工艺的离子束剖面测量系统模型。模型采用宽度1.8 mm的金属条作为收集电极,相邻两条之间的间距为2 mm。利用电子回旋共振源对束流剖面测量系统进行了性能测试,考察了网栅电压对信号收集的影响以及系统的线性响应和成像特性。结果表明,探测器输出信号与束流强度之间具有较好的线性关系,系统能得到离子束的一维横向强度分布,位置分辨率2 mm。 相似文献
10.
11.
为满足重离子治癌加速器装置(HIMM)回旋加速器引出段束流流强的测量需求,设计了新的束流流强测量系统,该系统利用积分电流变换器(ICT)及锁相放大器等配套电子学,能够实现束流流强的非拦截实时测量。文中首先分析了中能束线(MEBT)束流流强的测量需求,并对设计方案进行了实验室系统分析和在线束流强测量。实验室结果表明,锁相放大器的幅度和相位响应一致性满足测量需求。由于ICT对束流流强的测量是相对测量,先使用法拉第筒对ICT进行在线标定;标定前先对法拉第筒(FC)(20μA档位)和ICT系统的流强分辨在线测量,分别为6.45 nA和5.163 nA。由于束流抖动的影响,测量的束流的稳定性约90 nA,其对应的相对测量误差约8%,ICT系统响应时间小于1 ms。测量结果表明,该系统满足物理测量需求。回旋加速器高频系统参数变化引起ICT标定系数变化的工作将在进一步工作中展开。 相似文献
12.
13.
在多脉冲强流直线感应加速器(LIA)的测控和诊断系统中,电子束的在线测试数据处理是重要的组成部分。多脉冲强流电子束在线测试数据处理系统是集测试仪器、计算机和工作站等组成的工业以太网,以及实现测试网络配置、测试仪器的通信及控制、数据采集、束流强度和束质心位置计算、显示以及存储等功能为一体的专用软件。多脉冲强流电子束采用基于电阻环束流位置检测器(BPM)的束流测试线路,根据束线上每个BPM测试得到的四个象限点的原始电压信号波形,以及测试线路的结构参数,计算束线上每个PBM位置的束流强度以及束质心位置随时间变化的波形,根据随时间变化的波形数据计算每个BPM位置多个脉冲束流的强度以及束质心位置的统计数据。数据的存储采用SQL和文件系统相结合的方式。这套多脉冲强流电子束在线数据处理系统在多脉冲强流LIA的调试实验中稳定可靠运行,为实验提供有效可靠的数据。 相似文献
14.
15.
本文介绍了通过测量束流在输运管壁上形成的感应电流,来确定直线感应加速器束流大小、位置的一种方法。实验证明,这种测量方法不会影响电子束在管道中的传输,且测量精度高,装置简单,并可装在真空系统的外面,便于维修。 相似文献
16.
The measurement of surface roughness using stylus equipment has several disadvantages. A non-contact optical method is needed for measuring the surface roughness of engineering metals with improved accuracy. One candidate for an optical method is the use of a laser source, where the laser light intensity reflected from the surface represents the surface roughness of the illuminated area. A relation can be developed between the reflected laser beam intensity and the surface roughness of the metal. The present study examines the measurement of the surface roughness of the stainless steel samples using a He-Ne laser beam. In the measurement a Gaussian curve parameter of a Gaussian function approximating the peak of the reflected intensity is measured with a fast response photodetector. In order to achieve this, an experimental setup is designed and built. In the experimental apparatus, fiber-optic cables are used to collect the reflected beam from the surface. The output of the fiber-optic system is fed to a back-propagation neural network to classify the resulting surface profile and predict the surface roughness value. The results obtained from the present study are then compared with the stylus measurement results. It is found that the resolution of the surface texture improves considerably in the case of optical method and the neural network developed for this purpose can classify the surface texture according to the control charts developed mathematically. 相似文献
17.
MO Xiao-Hu FU Cheng-Dong ZHANG Jian-Yong QIN Qing QU Hua-Min WANG Yi-Fang XU Jin-Qiang ZHANG Tian-Bao 《中国物理C(英文版)》2008,32(12)
The proposed beam energy measurement system at BEPCⅡ is composed of three parts:the laser source and optics system,the laser-electron interaction system and the HPGe detector system.The working principles of each system are expounded together with the calculation for preliminary design.The normalizations of laser and electron beams are put forth and used for the evaluation of intensity of the backscattering photon.The simulation of HPGe detector is also performed for understanding the working properties. 相似文献
18.
19.
20.
For any experiment that uses the beam of an accelerator, monitoring the beam intensity is always an important concern. It is particularly useful if one can continuously measure the beam current without disturbing the beam. We report here on test experiments for an Integrating Current Transformer (ICT) used to measure fast extraction beams from the HIRFL-CSR main ring (CSRm). The laboratory tests and beam intensity measurement results are presented in this paper. The influence of the kicker noise is also analyzed. 相似文献