Influence of thermal treatment of low dielectric constant SiOC(H) films using MTES/O2 deposited by PECVD

Low dielectric constant SiOC(H) films are deposited on p-type Si(100) substrates by plasma enhanced chemical vapor deposition (PECVD) using methyltriethoxysilane (MTES, C₇H₁₈O₃Si) and oxygen gas as precursors. The SiOC(H) films are deposited at room temperature, 100, 200, 300 and 400 °C and then annealed at 100, 200, 300 and 400 °C temperatures for 30 min in vacuum. The influence of deposition temperature and annealing on SiOC(H) films are investigated. Film thickness and refractive index are measured by field emission scanning electron microscopy and ellipsometry, respectively. Chemical bonding characteristics of as-deposited and annealed films are investigated by Fourier transform infrared (FTIR) spectroscopy in the absorbance mode. As more carbon atoms are incorporated into the SiOC(H) films, both film density and refractive index are decreased due to nano pore structure of the film. In the SiOC(H) film, CH₃ group as an end group is introduced into OSiO network, thereby reducing the density to decrease the dielectric constant thereof. The dielectric constant of SiOC(H) film is evaluated by C-V measurements using metal-insulator-semiconductor (MIS), Al/SiOC(H)/p-Si structure and it is found to be as low as 2.2 for annealed samples deposited at 400 °C.     

Improvement of photoluminescence properties of porous silicon by silica passivation

Porous silicon (PS) was passivated by silica film using a sol-gel method; the photoluminescence (PL) properties were significantly improved; namely, PL intensity and stability increased and PL peak shifted to shorter wavelength. Scanning electron microscope (SEM) and Fourier transformed infrared spectroscope (FTIR) results indicated that silica passivation produced a compact film on the PS surface and modified the surface state of PS. The number of stable surface bonds (HSiO₃, HSiSiO₂ and H₂SiO₂) increased due to the oxidation of SiH back-bonds during the gelation process, and thus the PL intensity and stability were improved. Moreover, the blue-shift of PL peak was determined due to the increase in the ratio of SiO/SiH.     

Effect of CCC bond bending vibration on the photodissociation of cyclobutane

The effect of CCC bond bending on the photodissociation of cyclobutane to form two ethylene molecules was investigated by performing semiclassical electron-radiation-ion dynamics simulations and also by examining the potential energy surfaces of the electronic ground state and lowest excited states. These potential energy surfaces, calculated at the CASSCF/MRPT2 level with 6-31G* basis sets along a reaction path determined by the semiclassical dynamics simulations, show well-defined energy minima and maxima in the intermediate state region. It is found that in addition to rotation of the molecule around the central CC bond, CCC bond bending plays an important role in determining the features of the potential energy surfaces for the intermediate species.     

Low temperature catalytic performance of nanosized TiNiO for oxidative dehydrogenation of propane to propene

Nanosized TiNiO catalysts prepared by a modified sol-gel method have been investigated in the oxidative dehydrogenation of propane (ODP) to propene. At 300 °C the yield to propene of 12.1% was obtained on 9.1 wt.% TiNiO catalyst with the selectivity of 43%. The continued variety of lattice parameter and variation of chemical value of nickel and titanium ion on the surface indicates that there are strong interactions of TiO₂ and NiO. The decreased low temperature oxygen desorption and the weaker reducibility seems to be responsible for the decreased activity and enhanced selectivity of propane oxidative dehydrogenation over TiNiO catalysts.     

Structural study of thin films prepared from tungstate glass matrix by Raman and X-ray absorption spectroscopy

Thin films were prepared using glass precursors obtained in the ternary system NaPO₃BaF₂WO₃ and the binary system NaPO₃WO₃ with high concentrations of WO₃ (above 40% molar). Vitreous samples have been used as a target to prepare thin films. Such films were deposited using the electron beam evaporation method onto soda-lime glass substrates. Several structural characterizations were performed by Raman spectroscopy and X-ray Absorption Near Edge Spectroscopy (XANES) at the tungsten L_I and L_III absorption edges. XANES investigations showed that tungsten atoms are only sixfold coordinated (octahedral WO₆) and that these films are free of tungstate tetrahedral units (WO₄). In addition, Raman spectroscopy allowed identifying a break in the linear phosphate chains as the amount of WO₃ increases and the formation of POW bonds in the films network indicating the intermediary behavior of WO₆ octahedra in the film network. Based on XANES data, we suggested a new attribution of several Raman absorption bands which allowed identifying the presence of WO⁻ and WO terminal bonds and a progressive apparition of WOW bridging bonds for the most WO₃ concentrated samples (above 40% molar) attributed to the formation of WO₆ clusters.     

Preparation of visible-light responsive PF-codoped TiO2 nanotubes

Fabrication of PF-codoped TiO₂ nanotubes was carried out using a one-step electrochemical anodization process by tailoring the composition of the electrolyte with the aim of PF-codoping to extend the optical absorption of TiO₂ to the visible-light region. The as-prepared PF-codoped TiO₂ nanotubes were characterized by SEM, XPS, and UV-vis diffuse reflectance absorption spectra (DRS). The results showed that the tube diameter of the nanotubes was approximately 100 nm and the tube length was approximately 510 nm. The phosphorus and fluorine were successfully doped into TiO₂ nanotubes, as evidenced by XPS. Moreover, the PF-codoped samples displayed remarkably strong visible-light response.     

Adsorption structure of phenylphosphonic acid on an alumina surface

The adsorption structure of phenylphosphonic acid (PPOA) on an alumina surface was investigated as a function of exposure and temperature using infrared reflected absorption spectroscopy (IRAS) and a Kelvin probe. The alumina surface was held at room temperature during deposition. At monolayer adsorption, PO and Phenyl-P bands are observed, which indicate the creation of POAl bonds. The aromatic ring plane is positioned perpendicular to the surface, i.e. deprotonated PPOA stands vertically on the surface. At multilayer adsorption, PO and POH bands appear in the spectra. The multilayer PPOA film starts to desorb at 400 K. From 400 to 700 K, the IRAS spectra are similar to the monolayer spectrum, indicating that the multilayer structure reverses to the monolayer-like PPOA adlayer by heating. The acid molecules start to desorb at 700 K.     

Enhancement of Ti-containing hydrogenated carbon (TiC:H) films by high-power plasma-sputtering

Ti-containing amorphous hydrogenated carbon (TiC:H) thin films were deposited on stainless steel SS304 substrates by high-power pulsed magnetron sputtering (HPPMS) in an atmosphere of mixed Ar and C₂H₂ gases using titanium metal as the cathodic material. The multilayer structure of the deposited film had a TiTiCDLC gradient to improve adhesion and reduce residual stress. This study investigates the effects of substrate bias and target-to-substrate distance on the mechanical properties of TiC:H films. Film properties, including composition, morphology, microstructure, mechanical, and tribology, were examined by glow discharge spectroscopy (GDS), scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman spectroscopy, and a nanoindenter and a pin-on-disk tribometer. Experiments revealed impressive results.     

Asymmetric surface modification of poly(ethylene terephthalate) film by CF4 plasma immersion

Poly(ethylene terephthalate) (PET) films were treated with CF₄ plasma immersion. The samples were processed at different RF powers and treatment time. The surface modification of PET films was evaluated by water contact angle (CA), X-ray photoelectron spectroscopy (XPS) and atomic force microscope (AFM). Decrease in contact angle of both sides of PET films was observed under mild treatment conditions. However, as raising treatment power and/or time, the change in contact angle between the two sides of PET films was different. The relatively hydrophobic and hydrophilic surfaces were being in situ formed on the two sides of PET films, respectively. And the extreme values of water contact angle reached 108.63 and 7.56°, respectively. XPS analyses revealed that there was a substantial incorporation of fluorine and/or oxygen atoms in both side surfaces. The relative chemical composition of the C (ls) spectra's showed the incorporation of non-polar fluorine-based functionalities (i.e. CFCF_n, CF₂ or CF₃ groups) and polar oxygen-based functionalities (i.e. COOH or OH groups) in the surfaces. Correlation between the plasma parameters and the surface modification of PET films is also discussed.     

Improvement and mechanism of interfacial adhesion in PBO fiber/bismaleimide composite by oxygen plasma treatment

The improved interfacial adhesion of PBO fiber-reinforced bismaleimide composite by oxygen plasma processing was investigated in this paper. After treatment, the maximum value of interlaminar shear strength was 57.5 MPa, with an increase of 28.9%. The oxygen concentration of the fiber surface increased, as did the surface roughness, resulting in improvement of the surface wettability. The cleavage and rearrangement of surface bonds created new functional groups OCO, NCO and NO, thereby activating the fiber surface. And long-time treatment increased the reaction degree of surface groups while destroyed the newly-created physical structures. The enhancement of adhesion relied primarily on the strengthening of chemical bonding and mechanical interlocking between the fiber and the matrix. The composite rupture planes indicated that the fracture failure shifted from the interface to the matrix or the fiber.     

Pre-treatments applied to oxidized aluminum surfaces to modify the interfacial bonding with bis-1,2-(triethoxysilyl)ethane (BTSE): Part I. High-purity Al with native oxide

A remote microwave-generated H₂ plasma and heating to 250 °C were separately used to modify high-purity oxidized aluminum surfaces and to assess whether these treatments can help enhance adhesion with bis-1,2-(triethoxysilyl)ethane (BTSE) coatings. Different initial oxide surfaces were considered, corresponding to the native oxide and to surfaces formed by the Forest Products Laboratory (FPL) treatment applied for either 15 or 60 min. BTSE is applied from solution at pH 4, and competing processes of etching, protonation (to form OH groups) and coupling (to form AlOSi interfacial bonds) occur at the solid-liquid interface. Scanning electron microscopy (SEM) was used to determine how the topographies of the modified Al surfaces changed with the different pre-treatments and with exposure to a buffer solution of pH 4. Secondary-ion mass spectrometry (SIMS) was used to determine the direct amount of AlOSi interfacial bonds by measuring the ratio of peak intensities 71-70 amu, while X-ray photoelectron spectroscopy (XPS) was used to determine the overall strength of the silane coating adhesion by measuring the Si 2p signals before and after application of an ultrasonic rinse to the coated sample. Measured Al 2p and O 1s spectra helped assess how the different pre-treatments modified the various Al oxidized surfaces prior to BTSE coating. Pre-treated samples that showed increased AlOSi bonding after BTSE coating corresponded to surfaces, which did not show evidence of significant etching after exposure to a pH 4 environment. This suggests that such surfaces are more receptive to the coupling reaction during exposure to the BTSE coating solution. These surfaces include all H₂ plasma-treated samples, the heated native oxide and the sample that only received the 15 min FPL treatment. In contrast, other surfaces that show evidence of etching in pH 4 environments are samples that received lower amounts of AlOSi interfacial bonding. Overall, heating improved the BTSE adhesive bonding for the native Al oxide, while H₂ plasma treatment improved the BTSE bonding for surfaces that had initially been FPL-treated for 15 and 60 min.     

Synthesis and characterisation of hybrid carbon-alumina support

Hybrid carbon-coated alumina supports have been synthesised using 4,4′-methylenebis(phenylisocyanate) as carbon precursor. The adsorption of 4,4′-methylenebis(phenylisocyanate) on the alumina support is irreversible, the resulting organic moiety can undergo pyrolysis under elevated temperature with the formation of carbon coating on the alumina support. Carbon loading in the synthesised materials and thus a degree of coverage of the alumina surface with carbon layer can be increased by repetition of 4,4′-methylenebis(phenylisocyanate) adsorption-pyrolysis cycles. The carbon coating does not substantially influence the pore structure of the initial alumina support. Upon increasing the carbon loading, the carbon coating becomes more uniform with respect to carbon localisation both on the internal and the external surface of the alumina support. The carbon coating on an alumina support can be discriminated from carbonaceous deposits due to a difference in the steady-state surface charging of the samples. Moreover, carbonaceous surface species which associated with CO, CO and OCO groups in carbon coating can also be identified.     

Chlorine nuclear quadrupole coupling in chlorodifluoroacetyl chloride: Theory and experiment

A potential energy scan of chlorodifluoroacetyl chloride, CF₂ClC(O)Cl, at the MP2/6-311+G(d) level of theory predicts stable gauche and trans conformers, with E_gauche<E_trans. Ab initio calculations were made of approximate equilibrium structures of these and, on these structures, calculations were made of ³⁵Cl and ³⁷Cl nuclear quadrupole coupling constant tensors. Coupling constants here predicted, as well as rotational constants and molecular dipole moments, are applied to aid analyses of experimental microwave spectra. Chirped pulse Fourier transform microwave spectroscopy has been used to rapidly record the rotational spectra of four isotopologues of the title molecule, CClF₂C(O)Cl, namely ³⁵Cl³⁵Cl, ³⁵Cl³⁷Cl, ³⁷Cl³⁵Cl, and ³⁷Cl³⁷Cl. Only the gauche conformer was observed under the experimental conditions. For the four isotopologues a total of 464, 219, 197, and 77 transitions have been recorded, respectively. With the exception of the ³⁷Cl³⁷Cl isotopologue sufficient data was available to determine all Cl quadrupole coupling tensors. Comparisons between the theoretical and experimental results are made.     

Near infrared spectroscopy of organic acids: comparing OH and CH oscillator frequencies and intensities

This work investigates the vibrational spectroscopy of a series of organic acids, CH₃(CH₂)_nCOOH (n = 1-5), previously unobserved in the IR and near-IR (2000-15 000 cm⁻¹). The work obtains frequencies and relative intensities for all OH and CH stretching transitions. Comparison of the frequencies and intensities of CH and OH stretching transitions reveal interesting trends in acid chain length that are discussed. Literature values for acetic acid (CH₃COOH) and formic acid (HCOOH) are used to gain a broader understanding for the spectroscopy of the organic acids CH₃(CH₂)_nCOOH. The observation of several combination bands involving the CH and OH stretching vibrations and possible rotational isomer and hot band transitions are reported.     

Reaction of acetonitrile with the silicon(0 0 1) surface: A combined XPS and FTIR study

The adsorption of acetonitrile on the Si(0 0 1) surface has been investigated using X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FTIR). XPS and FTIR spectra indicate that adsorbed acetonitrile forms two correlated binding configurations, a CN species with a strong FTIR absorption at 1540 cm⁻¹ and a CCN (ketenimine) species that has a very strong FTIR absorption at 1952 cm⁻¹. The CCN FTIR peak at 1952 cm⁻¹ shows a striking polarization dependence, with the infrared transition dipole almost entirely in the plane of the sample and parallel to the SiSi dimer axis. Our data suggests that the primary CCN structure results from cleavage of two C-H bonds, forming a structure in which the N and terminal C atom are both linked to the surface. Temperature-dependent experiments help to elucidate the complicated reaction mechanism for acetonitrile adsorbing onto the Si(0 0 1) surface. Dosing at higher temperature increases the amount of CCN relative to CN species while heating leads to direct transformation of the CN to the CCN species. Our results indicate that previous studies, which considered only products formed by cleavage of a single C-H bond, have misidentified the primary ketenimine product. A reinterpretation of the earlier results, combined with data presented here, sheds new light onto the products and mechanism of interaction of acetonitrile with Si(0 0 1).     

Modification of H-terminated Ge surface in hydrochloric acid

Various amounts of H-termination on a Ge surface were prepared by dipping a Ge wafer in differentially diluted hydrofluoric acid solutions for different periods of time. Formation of GeH_x in hydrofluoric acid and its disappearance in hydrochloric acid (HCl) were directly measured by using multiple internal reflection Fourier transform infrared spectroscopy (MIR FT-IR). Peak intensity of GeH_x vibration mode was increased with diluted hydrofluoric acid (DHF) treatment time and the concentration of HF solution. Therefore, it is suggested that microroughness of a Ge surface changes depending on the concentration of HF. Peak intensity of GeH_x vibration mode was reduced when the GeH_x surface was treated in HCl solution. With an increase in HCl treatment time, peak intensity of GeH_x vibration mode was reduced. Ge surfaces treated in a more diluted HF solution were barely modified, because it was thought to have fewer kink sites, dihydrides and trihydrides.     

Effect of oxidation on the optical and surface properties of AlGaN

The chemical properties of Al_xGa_1−xN surfaces exposed to air for different time periods are investigated by atomic force microscopy (AFM), photoluminescence (PL) measurement and X-ray photoelectron spectroscopy (XPS). PL and AFM results show that Al_xGa_1−xN samples exhibit different surface characteristics for different air-exposure times and Al contents. The XPS spectra of the Al 2p and Ga 2p core levels indicate that the peaks shifted slightly, from an AlN to an AlO bond and from a GaN to a GaO bond. All of these results show that the epilayer surface contains a large amount of Ga and Al oxides.     

Chemisorption of 1,1-dichloroethene on the Si(1 1 1)-7 × 7 surface

Chemisorption of 1,1-dichloroethene (Cl₂CCH₂) to a Si(1 1 1)-7 × 7 surface was studied by means of X-ray photoelectron spectroscopy using synchrotron radiation, recording chlorine 2p and carbon 1s spectra. For carbon 1s, spectral assignment of the chemisorbed species is based on quantum chemical calculations of chemical shifts in model compounds.The results confirm the identity of covalently bonded 1-chlorovinyl (-CClCH₂) and vinylidene (CCH₂) adspecies. Upon chemisorption at room temperature it was found that about one-third of the molecules break one C-Cl bond while about two-thirds of the adsorbates break two C-Cl bonds. We do not, however, find evidence for isomerization of CCH₂ to di-bonded vinylene (-CHCH-).     

Surface modification of poly(propylene carbonate) by oxygen ion implantation

Poly(propylene carbonate) (PPC) was implanted by oxygen ion with energy of 40 keV. The influence of experimental parameters was investigated by varying ion fluence from 1 × 10¹² to 1 × 10¹⁵ ions/cm². XPS, SEM, surface roughness, wettability, hardness, and modulus were employed to investigate structure and properties of the as-implanted PPC samples. Eight chemical groups, i.e., carbon, CH, COC, CO, OCO, CO, , and groups were observed on surfaces of the as-implanted samples. The species and relative intensities of the chemical groups changed with increasing ion fluence. SEM images displayed that irradiation damage was related strongly with ion fluence. Both surface-recovering and shrunken behavior were observed on surface of the PPC sample implanted with fluence of 1 × 10¹⁵ ions/cm². As increasing ion fluence, the surface roughness of the as-implanted PPC samples increased firstly, reached the maximum value of 159 nm, and finally decreased down the minimum value. The water droplet contact angle of the as-implanted PPC samples changed gradually with fluence, and reached the minimum value of 70° with fluence of 1 × 10¹⁵ ions/cm². The hardness and modulus of the as-implanted PPC samples increased with increasing ion fluence, and reached their corresponding maximum values with fluence of 1 × 10¹⁵ ions/cm². The experimental results revealed that oxygen ion fluence closely affected surface chemical group, morphology, surface roughness, wettability, and mechanical properties of the as-implanted PPC samples.