Transverse Transport of Polymeric Nanofluid under Pure Internal Heating: Keller Box Algorithm

The present work aims to investigate transverse Oldroyd-B nanofluid flow on a stretched panel with consideration of internal heat generation. Buongiorno model is utilized to study influence of thermophoresis and Brownian motion effects. A numerical procedure known as Keller box algorithm is used to solve the governed physical model. Graphically velocity, temperature and concentration of nanoparticles are expressed. Also, concerned physical measures such as heat and mass transfer are investigated numerically. The simulations performed revealed that fluid parameters play a significant role in heat transfer under Brownian motion and thermophoresis effects. Local heat flux is elevated while local mass flux is suppressed with enhancing Brownian motion parameter. Streamlines pattern exhibits that flow is more inclined in the presence of Deborah number effects. To the best of our knowledge, transverse flow of an Oldroyd-B type fluid which incorporates the thermal relaxation effects has never been reported before in the presence of Brownian motion and internal heating phenomenon. Therefore we intend to discuss these features in detail. The obtained results are a novel contribution, which can be benchmark for further relevant academic research related to polymer industry.     

Transverse Transport of Polymeric Nanofluid under Pure Internal Heating: Keller Box Algorithm

The present work aims to investigate transverse Oldroyd-B nanofluid flow on a stretched panel with consideration of internal heat generation. Buongiorno model is utilized to study influence of thermophoresis and Brownian motion effects. A numerical procedure known as Keller box algorithm is used to solve the governed physical model.Graphically velocity, temperature and concentration of nanoparticles are expressed. Also, concerned physical measures such as heat and mass transfer are investigated numerically. The simulations performed revealed that fluid parameters play a significant role in heat transfer under Brownian motion and thermophoresis effects. Local heat flux is elevated while local mass flux is suppressed with enhancing Brownian motion parameter. Streamlines pattern exhibits that flow is more inclined in the presence of Deborah number effects. To the best of our knowledge, transverse flow of an Oldroyd-B type fluid which incorporates the thermal relaxation effects has never been reported before in the presence of Brownian motion and internal heating phenomenon. Therefore we intend to discuss these features in detail. The obtained results are a novel contribution, which can be benchmark for further relevant academic research related to polymer industry.     

Effect of Brownian motion on flow and heat transfer of nanofluids over a backward-facing step with and without adiabatic square cylinder

A mathematical model to predict large enhancement of thermal conductivity of nanofluids by considering the Brownian motion is proposed. The effect of the Brownian motion on the flow and heat transfer characteristics is examined. The computations were done for various types of nanoparticles such as CuO, Al₂O₃, and ZnO dispersed in a base fluid (water), volume fraction of nanoparticles ? in the range of 1 % to 6 % at a fixed Reynolds number Re = 450 and nanoparticle diameter d_np = 30 nm. Our results demonstrate that Brownian motion could be an important factor that enhances the thermal conductivity of nanofluids. Nanofluid of Al₂O₃ is observed to have the highest Nusselt number Nu among other nanofluids types, while nanofluid of ZnO nanoparticles has the lowest Nu. Effects of the square cylinder on heat transfer characteristics are significant with considering Brownian motion. Enhancement in the maximum value of Nu of 29 % and 26 % are obtained at the lower and the upper walls of the channel, respectively, by considering the Brownian effects, with square cylinder, compared with that in the case without considering the Brownian motion. On the other hand, results show a marked improvement in heat transfer compared to the base fluid, this improvement is more pronounced on the upper wall for higher ?.     

Effect of Hall and ion-slip on the peristaltic transport of nanofluid: A biomedical application

The peristaltic flow of viscous nanofluid in a channel with compliant walls is examined. The flow analysis is presented in the presence of Hall and ion-slip effects. The resulting equations through long wavelength and low Reynolds number approaches are solved. Stream function is obtained in closed form. Attention has been given to the influence of Brownian motion, thermophoresis and Hall and ion slip parameters on the velocity, temperature and concentration profiles. The results show an affective increase in the temperature and nanoparticles concentration with the increase in the strength of Brownian motion effects. Similar results are observed for Hall and ion slip parameters. Further heat transfer coefficient is an increasing function of Hall and ion-slip parameters. Also decrease in the size of trapped bolus is shown for Hall and ion-slip parameters.     

方腔内Cu/Al2O3水混合纳米流体自然对流的格子Boltzmann模拟

纳米流体作为一种较高的导热介质, 广泛应用于各个传热领域. 鉴于纳米颗粒导热系数和成本之间的矛盾, 本文提出了一种混合纳米流体. 为了研究混合纳米流体颗粒间相互作用机理和自然对流换热特性, 在考虑颗粒间相互作用力的基础上, 利用多尺度技术推导了纳米流体流场和温度场的格子Boltzmann方程, 通过耦合流动和温度场的演化方程, 建立了Cu/Al₂O₃水混合纳米流体的格子Boltzmann模型, 研究了混合纳米流体颗粒间的相互作用机理和纳米颗粒在腔体内的分布. 发现在颗粒间相互作用力中, 布朗力远远大于其他作用力, 温差驱动力和布朗力对纳米颗粒的分布影响最大. 分析了纳米颗粒组分、瑞利数对自然对流换热的影响, 对比了混合纳米流体(Cu/Al₂O₃-水)与单一金属颗粒纳米流体(Al₂O₃-水)的自然对流换热特性, 发现混合纳米流体具有更强的换热特性.     

A fractal model for heat transfer of nanofluids by convection in a pool

Based on the fractal distribution of nanoparticles, a fractal model for heat transfer of nanofluids is presented in the Letter. Considering heat convection between nanoparticles and liquids due to the Brownian motion of nanoparticles in fluids, the formula of calculating heat flux of nanofluids by convection is given. The proposed model is expressed as a function of the average size of nanoparticle, concentration of nanoparticle, fractal dimension of nanoparticle, temperature and properties of fluids. It is shown that the fractal model is effectual according to a good agreement between the model predictions and experimental data.     

抛物槽式太阳能集热器内合成油基纳米流体传热特性的数值模拟

对Al₂O₃-合成油纳米流体在槽式太阳能集热管内的传热特性进行流体动力学数值模拟,重点考察纳米流体导热系数模型的影响。通过与管内Nusselt数半经验模型的预测结果对比,表明使用考虑布朗运动的纳米流体导热系数模型可较好地预测集热管内传热特性。研究表明纳米颗粒与流体基液的相对运动具有促进集热管内传热的作用。最后,定量研究纳米颗粒添加量对提高基础流体平均传热系数的影响,显示纳米流体在太阳能集热器中具有巨大应用潜力。     

Analysis of radiation in a suspension of nanoparticles and gyrotactic microorganism for rotating disk of variable thickness

Here heat, concentration and motile microorganism transfer rates in radiative flow of nanofluid are investigated. Variable thicked surface of rotating disk is examined. Concept of microorganisms suspended nanoparticles is stabilized through bioconvection which has been induced by combined effects of magnetic field and buoyancy forces. For obtained nonlinear differential systems the convergent series solutions are derived. Fluid flow, temperature, concentration and motile density behaviors for different parameters are analyzed through graphs. Skin friction and Nusselt number are analyzed numerically. Clearly temperature and concentration have opposite behavior for larger Brownian motion parameter. Motile density reduces for bioconvection Peclet number and bioconvection Lewis number.     

Unsteady boundary layer flow of a nanofluid over a stretching sheet with variable fluid properties in the presence of thermal radiation

In this paper, we investigated numerically an unsteady boundary layer flow of a nanofluid over a stretching sheet in the presence of thermal radiation with variable fluid properties. Using a set of suitable similarity transformations, the governing partial differential equations are reduced into a set of nonlinear ordinary differential equations. System of the nonlinear ordinary differential equations are then solved by the Keller-box method. The physical parameters taken into consideration for the present study are: Prandtl number Pr, Lewis number Le, Brownian motion parameter N _b, thermophoresis parameter N _t, radiation parameter N _r, unsteady parameter M. In addition to these parameters, two more new parameters namely variable thermophoretic diffusion coefficient parameter e and variable Brownian motion diffusion coefficient parameter β have been introduced in the present study. Effects of these parameters on temperature, volume fraction of the nanoparticles, surface heat and mass transfer rates are presented graphically and discussed briefly. To validate our method, we have compared the present results with some previously reported results in the literature. The results are found to be in a very good agreement.     

纳米悬浮液的有效导热系数

文中以有效介质近似理论为基础,考虑了纳米颗粒在基液中强烈的B rown ian运动对强化传热的作用和纳米颗粒的表面吸附液体层、纳米颗粒的粒径和体积分数对纳米悬浮液有效导热系数的影响,建立了预测纳米悬浮液有效导热系数的模型,通过对纳米CuO-去离子水溶液的验证,发现该模型比几种经典模型具有更高的精度,因此具有一定的参考价值。     

Axisymmetric Stagnation-Point Flow of Nanofluid over a Stretching Surface

This paper investigates the laminar boundary layer flow of nanofluid induced by a radially stretching sheet. Nanofluid model exhibiting Brownian motion and thermophoresis is used. Series solutions for a reduced system of nonlinear ordinary differential equations are obtained by homotopy analysis method (HAM). Comparative study between the HAM solutions and previously published numerical results shows an excellent agreement. Velocity, temperature and mass fraction are displayed for various values of parameters. The local skin friction coefficient, the local Nusselt number and the local Sherwood number are computed. It is observed that the presence of nanoparticles enhances the thermal conductivity of base fluid. It is found that the convective heat transfer coefficient (Nusselt number) is decreased with an increase in concentration of nanoparticles whereas Sherwood number increases when concentration of nanoparticles in the base fluid is increased.     

Entropy generation applications in flow of viscoelastic nanofluid past a lubricated disk in presence of nonlinear thermal radiation and Joule heating

Entropy generation is the loss of energy in thermodynamical systems due to resistive forces,diffusion processes, radiation effects and chemical reactions. The main aim of this research is to address entropy generation due to magnetic field, nonlinear thermal radiation, viscous dissipation, thermal diffusion and nonlinear chemical reaction in the transport of viscoelastic fluid in the vicinity of a stagnation point over a lubricated disk. The conservation laws of mass and momentum along with the first law of thermodynamics and Fick's law are used to discuss the flow, heat and mass transfer, while the second law of thermodynamics is used to analyze the entropy and irreversibility. The numbers of independent variables in the modeled set of nonlinear partial differential equations are reduced using similarity variables and the resulting system is numerically approximated using the Keller box method. The effects of thermophoresis,Brownian motion and the magnetic parameter on temperature are presented for lubricated and rough disks. The local Nusselt and Sherwood numbers are documented for both linear and nonlinear thermal radiation and lubricated and rough disks. Graphical representations of the entropy generation number and Bejan number for various parameters are also shown for lubricated and rough disks. The concentration of nanoparticles at the lubricated surface reduces with the magnetic parameter and Brownian motion. The entropy generation declines for thermophoresis diffusion and Brownian motion when lubrication effects are dominant. It is concluded that both entropy generation and the magnitude of the Bejan number increase in the presence of slip. The current results present many applications in the lubrication phenomenon,heating processes, cooling of devices, thermal engineering, energy production, extrusion processes etc.     

自由分子区内纳米颗粒的热泳力计算

基于非平衡态分子动力学模拟方法,研究了自由分子区内纳米颗粒的热泳特性.理论研究表明,纳米颗粒与周围气体分子之间的非刚体碰撞效应会明显地改变其热泳特性,经典的Waldmann热泳理论并不适用,但尚未有定量的直接验证.模拟计算结果表明:对于纳米颗粒而言,当气-固相互作用势能较弱或气体温度较高时,气体分子与纳米颗粒之间的非刚体碰撞效应可以忽略,Waldmann热泳理论与分子动力学模拟结果吻合较好;当气-固相互作用势能较强或气体温度较低时,非刚体碰撞效应较为明显,Waldmann热泳理论与模拟结果存在较大误差.基于分子动力学模拟结果,对纳米颗粒的等效粒径进行了修正,并考虑了气体分子与纳米颗粒之间的非刚体碰撞效应,理论计算结果与分子动力学模拟结果吻合较好.     

Chemical reaction and heat source/sink effect on magnetonano Prandtl-Eyring fluid peristaltic propulsion in an inclined symmetric channel

The main emphasis of this article is to examine the peristaltic transport of magnetohydrodynamic (MHD) Prandtl-Eyring nanofluid in an inclined symmetric channel with compliant walls. Nanofluid including thermophoresis and Brownian motion is taken into account. Two-dimensional governing equations for the peristaltic motion of Prandtl-Eyring nanofluid are modeled in the presence of chemical reaction. The resulting dimensionless nonlinear system is numerically solved for velocity, temperature, and concentration. The effects of various dimensionless parameters on fluid flow are featured through graphs. This analysis reveals that the influence of wall tension and wall mass parameters on axial velocity are increasing whereas the impact of wall damping parameter on velocity is decaying. The opposite effect of thermophoresis parameter and Brownian motion parameter on both temperature and heat transfer coefficient are observed. The destructive chemical reaction causes decay in temperature, nanoparticle concentration, and heat transfer coefficient.     

Impact of nanoparticles and radiative heat flux in von Kármán swirling flow of Maxwell fluid

In this paper, the classical von Kármán swirling flow problem due to a rotating disk is modeled and studied for the rate type Maxwell nanofluid together with heat and mass transfer mechanisms. The model under consideration predicts the relaxation time characteristics. The novel aspects of thermophoresis and Brownian motion features due to nanoparticles are investigated by employing an innovative Buongiorno’s model. The analysis further explores the impact of linear Rosseland radiation on heat transfer characteristics. The concept of boundary layer approximations is utilized to formulate the basic governing equations of Maxwell fluid. The dimensionless form of a system of ordinary differential equations is obtained through similarity approach adopted by von Kármán. The system of equations is integrated numerically in domain [0,∞) by using bvp midrich scheme in Maple software. The obtained results intimate that higher rotation raises the radial and angular velocity components. The nano-particles concentration enhances with Brownian motion parameter. Further, the heat transfer rate at the disk surface diminishes with thermophoresis parameter. The achieved numerical computations of velocity profiles, friction coefficient and Nusselt number are matched in limiting cases with previously published literature and an outstanding agreement is observed.     

Numerical analysis for peristalsis of Carreau–Yasuda nanofluid in an asymmetric channel with slip and Joule heating effects

This study investigates the peristaltic transport of magnetohydrodynamic (MHD) Carreau–Yasuda nanofluid through an asymmetric channel. Viscous dissipation, Joule heating and Hall effects are also included in the analysis. Velocity, thermal and concentration slip conditions are considered. The problem is modeled subject to long wavelength and low Reynolds number assumptions. Resulting nonlinear equations are numerically solved. Impact of embedded parameters on the fluid velocity, temperature, concentration of nanoparticles and heat and mass transfer rates at the wall are examined. Graphical results show that an escalation in the strength of appliedmagnetic field and increase in the value of Hall parameter reduce the velocity of nanofluid. Brownian motion and thermophoresis effects increase the temperature of the nanofluid. The present study shows an excellent agreement with the previously available studies in the limiting case.     

纳米流体对流换热机理分析

考虑在纳米流体中纳米颗粒做布朗运动引起的对流换热, 基于纳米颗粒在纳米流体中遵循分形分布, 本文得到纳米流体对流换热的机理模型. 本解析模型没有增加新的经验常数, 从该模型发现纳米流体池沸腾热流密度是温度、纳米颗粒的平均直径、 纳米颗粒的浓度、纳米颗粒的分形维数、沸腾表面活化穴的分形维数、基本液体的物理特性的函数. 对不同的纳米颗粒浓度和不同的纳米颗粒平均直径与不同的实验数据进行了比较, 模型预测的结果与实验结果相吻合. 所得的解析模型可以更深刻地揭示纳米流体对流换热的物理机理.     

纳米流体介质导热机理初探

纳米流体导热行为具有许多奇异的特性，结合纳米流体的特点和微尺度传热学原理，研究了 热流在纳米颗粒内波动式及非限域的热传导特性、纳米颗粒在悬浮液内的布朗运动、颗粒- 液体界面上液膜层原子的有规则排列、以及纳米颗粒的团簇形成及移动等四方面因素对纳米 流体导热系数的影响. 关键词： 纳米流体 导热     

Peristaltic blood flow with gold nanoparticles as a third grade nanofluid in catheter: Application of cancer therapy

Cancer is dangerous and deadly to most of its patients. Recent studies have shown that gold nanoparticles can cure and overcome it, because these particles have a high atomic number which produce the heat and leads to treatment of malignancy tumors. A motivation of this article is to study the effect of heat transfer with the blood flow (non-Newtonian model) containing gold nanoparticles in a gap between two coaxial tubes, the outer tube has a sinusoidal wave traveling down its wall and the inner tube is rigid. The governing equations of third-grade fluid along with total mass, thermal energy and nanoparticles are simplified by using the assumption of long wavelength. Exact solutions have been evaluated for temperature distribution and nanoparticles concentration, while approximate analytical solutions are found for the velocity distribution using the regular perturbation method with a small third grade parameter. Influence of the physical parameters such as third grade parameter, Brownian motion parameter and thermophoresis parameter on the velocity profile, temperature distribution and nanoparticles concentration are considered. The results pointed to that the gold nanoparticles are effective for drug carrying and drug delivery systems because they control the velocity through the Brownian motion parameter $N_b$ and thermophoresis parameter $N_t$. Gold nanoparticles also increases the temperature distribution, making it able to destroy cancer cells.