磁性流体薄片高电压电流光学测量的研究

研究一种用磁性流体薄片对高压电流进行光学测量的电流传感器。设计原理基于磁性流体的光透射率随垂直磁场强度的变化而变化的关系。磁性流体受到垂直外磁场作用,原先无序的磁性颗粒将凝聚在一起形成条条磁链,从而引起磁性流体的光透射率的变化。采用磁性流体作为传感媒介设计的传感结构避免了基于法拉第效应的光磁式电流互感器对环境干扰敏感造成信噪比不高和传统的电磁式电流互感器的高压绝缘的缺陷。通过改变磁性流体的浓度和基液,或者改变传感头的结构,来达到实际需要的传感灵敏度和响应时间。     

实用化光学电流传感器光路系统的研究

介绍了基于法拉第效应的光学电流互感器，对其光路系统进行了深入的研究。采用了一种全闭合的传感头结构并解决了光的耦合问题。从提高实用化光学电流传感器的可靠性出发，设计了一套具有光路自诊断能力的主辅光路系统，此传感器已在１１０ｋＶ变电站试运行。     

实用化光学电流传感器光路系统的研究

介绍了基于法拉第效应的光学电流互感器,对其光路系统进行了深入的研究。采用了一种全闭合的传感头结构并解决了光的耦合问题。从提高实用化光学电流传感器的可靠性出发,设计了一套具有光路自诊断能力的主辅光路系统,此传感器已在110kV变电站试运行。     

便携式光纤电流互感器传感头设计

针对电解铝工业中大电流测量现场环境复杂的难题,在传统光纤电流互感器的基础上提出一种便携式光纤电流互感器.对设计安装过程中由于柔性传感头光路不闭合和导体偏心引起的法拉第相移误差进行分析和有限元仿真计算,结果表明:法拉第相移相对误差随传感头不闭合度角度线性增加,随导体到非闭合点的距离增大而减小,且增加传感头匝数能减小法拉第相移误差.由于便携式光纤电流互感器准确度随导体到非闭合点的距离增大而提高,设计了一种使传感头非闭合点向一端延伸且易拆装的结构,实验测试得到该便携式光纤电流互感器的全温准确度为0.86%,满足电解铝厂准确度1%的使用要求.     

用于电力系统的光学电流互感器技术进展

介绍了光学电流测量技术的发展情况，描述了目前几种主要的互感器结构及其基本原理，并对各自存在的问题及解决途径进行了讨论。从研究现状来看，块状玻璃型传感器技术相对成熟，已经有商业产品问世；混合型传感器测量精度较高，但传感头有源电路的供电技术复杂，还没有圆满的解决方案；全光纤型是光学电流互感器发展的最终目标，目前存在的主要问题是光纤的固有线性双折射难以处理，有赖于新型光纤材料及集成光学元件的进一步发展。最后综合评述了光学电流互感器技术的发展趋势及产业化前景。     

一种新型光纤电流互感器

提出了一种新的反射式偏振干涉电流互感器,建立了系统的结构模型,阐述了互感器的工作原理,给出了λ/4延迟器产生圆偏振光的方法和传感头的设计方案,最后给出了实验数据。其中经过λ/4延迟器的二束光除偏振方向互相交换外,它们都在同一根光纤中传输,周围环境产生的光纤伸缩等效应对互感器的输出几乎没有影响,因此可以排除外来的干扰。实验表明,全光纤电流互感器的误差基本满足0.2级精度,并且具有自动补偿功能,较好地消除了温度等环境影响,提高了互感器的信噪比。     

光学电流互感器中线性双折射与法拉第效应的分离检测

分析了线性双折射对光学电流互感器(OCT)电压输出的影响,指出了差除和信号处理方案检测输出光信息的不完备性问题,用琼斯矩阵理论证明了差除和方案不能独立检测块状玻璃传感头中线性双折射的结论。提出了光学电流互感器的椭偏检测方案,从椭圆偏振光参量方程出发,推导了温致线性双折射、法拉第旋转角与输出椭圆偏振光椭率、倾角之间的解析式,证明了椭偏检测法对输出光信息检测的完备性,实现了温致线性双折射和待测电流的同时测量。为保证实时性,提出了输出椭圆光的三态检测方案,采用水平、垂直和45°三个偏振态的实时检偏,既克服了线性双折射的影响又实现了待测电流的实时测量,从检测原理上解决了温致线性双折射对光学电流互感器的影响。     

保偏膜式光学玻璃电流传感头温度特性理论分析

用理论分析和计算机仿真的方法研究了环境温度变化导致的光源中心波长移动和传感头材料Verdet常量与应力双折射变化对光学电流互感器输出性能的影响.结果表明：环境温度由10℃变化到30℃时，归一化尺度因子降低了1.379%.其中光源中心波长随温度的变化对输出尺度因子的影响大于其他光学参量温度特性的影响.因此，在光学电流互感器设计中，必须采取必要的技术措施减小或补偿传感头温度特性对系统的不利影响.     

基于比较测量法的光学电流互感器

提出采用永久磁体作为参考源应用于光学电流互感器中,对随环境因素改变的材料Verdet常数及线性双折射进行实时补偿的比较测量法.运用矩阵光学理论对该方法进行了理论分析,并进行了相关实验,实验结果证明了该方法的可行性.设计的传感单元采用了点式传感头,具有结构简单的特点,适合于在高电压环境中应用.     

光学电流互感器传感头色散特性对系统灵敏度影响研究

以琼斯矩阵为数学工具,利用理论分析和计算机仿真的方法研究了块状玻璃光学电流互感器传感头的色散特性对系统灵敏度的影响,并进行了实验验证.在光学电流互感器系统中,光源的驱动电流与环境温度改变,都会造成光源峰值波长移动.而在传感头中主要是由单层保偏反射膜的反射相移、光学玻璃的Verdet常数以及光学玻璃内的线性双折射这三个因素的色散特性,使得光学电流互感器的灵敏度随光源波长的变化而改变.研究结果表明,这种色散特性会对输出曲线的尺度因子产生明显的影响.因此,光源的恒温控制与光源驱动电流的恒流控制是必要的.本研究结果可为光学电流互感器的研究设计人员提供有用的参考.     

Detection Schemes for Optical-Coherence-Domain Imaging of Biological Tissues

Optical coherence tomography (OCT) is a novel imaging modality based on low-coherence interferometry. This paper summarizes some of our latest work on the development of OCT where we have taken two approaches. In the first approach we have developed a phase-drift-suppression method for stable heterodyne detection in the presence of phase fluctuations. In the second approach we have concentrated on the development of two-dimensional heterodyne detection techniques for real-time imaging. A novel detection scheme has been proposed, which enables parallel heterodyne detection with a commercially available imager such as a charge-coupled-device camera. Meanwhile, a non-scanning OCT system configuration based on off-axis interferometry is being studied. Using a newly developed angular-dispersion imaging scheme, we show that the axial reflectance profile in OCT measurement can be detected instantaneously with a sensor array.     

Influence of Phase Drift on Optical Coherence Tomography Using a CCD Camera-Based Heterodyne Detection Technique

The performance of a two-dimensional heterodyne detection technique in optical coherence tomography (OCT) was studied. This technique, which is based on the frequency synchronous detection method, enables the use of an imager such as a charge coupled device (CCD) camera as a heterodyne sensor array, so that horizontal cross-sectional image can be acquired in real time without lateral scanning. OCT measurements of scattering media including a biological object were demonstrated. To evaluate the influence of phase fluctuations on the present technique, we measured and analyzed the statistical relative-standard-deviation of heterodyne signal intensity as a function of the random phase shifts between two consecutive CCD frames. Practical limitations in the signal stability and possible solutions are discussed.     

复谱频域OCT成像的研究

采用频域技术的OCT系统，深度扫描信息由背向散射光谱的傅立叶反变换获得，简化了轴向扫描过程，从而使快速OCT成像成为可能．为了实现复杂生物组织的OCT快速成像，消除谱频域OCT的“混叠”现象、重建样品的真实层析结构，本文引入了相移干涉技术，构建了一套满量程复谱频域OCT实验系统，并为系统设计了特殊的分束镜和移相器，为最终实现复杂生物组织的OCT快速成像提供了条件．     

光学相干层析成象技术的医学诊断应用

利用超短脉冲飞秒激光建立了OCT实验装置,通过对动物肾脏组织样品的层析成象,OCT图象与传统组织学图谱能找到很好的对应关系;对动物脑梗塞模型组织的扫描成象,得到了脑梗塞侧和正常侧的OCT图象,实验中,大脑病变组织和正常组织能够被正确区分。     

Fiber type of optical coherence tomography with an auto-focus device

Optical coherence tomography (OCT) is a novel technique for non-invasive imaging based on low coherence interferometer. In this study, we develop a new optical fiber type of OCT with a commercial auto-focus device to simultaneously measure the refractive index and thickness of a single-layer for demonstration. An auto-focus device can be easily implemented into the new OCT in order to diminish the measurement error resulting from the slight vibration of the sample and/or the sample stage. However, if the conventional OCT is implemented with an auto-focus device, it would be extremely difficult in locating and controlling the positions of the sample and scanning stages.From the experimental results, the error percentage from various frequency of the simulated noise is almost under 0.4%. Due to the resonance frequency of a DVD pickup head is around 40 Hz, the error percentage is apparently highest up to 1%; however still acceptable. It is concluded that the auto-focus device indeed works in an OCT system.     

一种线性相位反演波前测量方法的实验研究

 描述了基于线性相位反演算法的波前传感器的基本组成结构。在实验室内搭建了相应的演示验证实验装置，对该种新型波前测量方法的特性进行了实验研究。实验计算结果表明：这种根据入射全孔径远场光斑强度分布直接反演出入射波前相位的线性相位反演新方法原理是可行的。只需实时测量一幅焦平面图像，根据焦平面上光强分布的微小变化量与入射孔径面上的相位分布的微小变化量之间存在的近似线性关系，就可以用模式复原的原理复原出入射波前相位。传感器对于离焦，像散等像差模式都可以进行较为准确的测量，误差率都小于1。对称系统像差中存在少量的非对称像差对复原结果的准确性影响不大。     

Optical Coherence Tomography Premiere in Korea

Optical Coherence Tomography (OCT) is considered as fundamentally new image modality having advantages such as high-speed, real-time cross sectional imaging with non-invasive in vivo investigation of biological tissue and its potential for clinical application is highly evaluated. In spite of these merits, the research activity in OCT has not taken much attention until recently. However the situation in Korea is gradually changing due to understanding of its versatile applications. Active research and commercialization are underway. Bulk optics-based OCT system is changed into alignfree fiber-optics system. With our expertise in the fabrication of fiber grating devices and strong background in control of fiber based system, we hope to contribute in developing simplified all-fiber OCT system with better performance. As a leading research group, working on OCT, we have firstly implemented fiber-based OCT system in Korea and demonstrated the imaging performance with glass plate and onion.     

Sensitivity enhancement based on application of multi-pass interferometry in phase-sensitive surface plasmon resonance biosensor

A novel design of multi-pass surface plasmon resonance (SPR) biosensor with differential phase interrogation based on multi-pass interferometry is presented. This new configuration provides an intrinsic phase amplification effect of over twofold by placing the SPR sensor head in a signal arm of the interferometer so that the interrogating optical beam will traverse the sensor surface infinite number of times. Experimental interferometers based on the Michelson and Fabry–Perot configurations have been employed to experimentally verify this amplification effect when they were compared with Mach–Zehnder configuration, results obtained from salt–water mixtures, antibody–antigen, and protein–DNA binding reaction confirmed the expected phase measurement enhancement, thus leading to the possibility of direct detection of small sized bio-molecules using SPR.     

Modeling wireless sensor networks using random graph theory

A critical issue in wireless sensor networks (WSNs) is represented by limited availability of energy within network nodes. Therefore, making good use of energy is necessary in modeling sensor networks. In this paper we proposed a new model of WSNs on a two-dimensional plane using site percolation model, a kind of random graph in which edges are formed only between neighbouring nodes. Then we investigated WSNs connectivity and energy consumption at percolation threshold when a so-called phase transition phenomena happen. Furthermore, we proposed an algorithm to improve the model; as a result the lifetime of networks is prolonged. We analyzed the energy consumption with Markov process and applied these results to simulation.     

用于全场光学相干层析成像的无色散相移器研究

提出了基于旋转λ/2波片无色散相移器的理论模型,和实施该相移器功能的全场光学相干层析成像(Optical coherence tomography,OCT)系统,为实现快速、高分辨光学相干层析成像提供了一种有效方法。该相移器能在宽光谱范围内无色散地获得八倍于λ/2波片旋转角的相移量,避免了利用单色光相移算法提取信号时存在的系统误差。针对修正Carré算法和三步相移算法所要求的不同相移量,在240 nm波长范围内,对相移器的性能进行了数值分析。结果表明,在给定光谱范围内,相移量越大,相移误差的绝对值也越大,幅值比变化范围也越大。用于实施无色散相移器功能的全场光学相干层析成像系统结构,与现有结构相比,具有一些有益的特点。