36.5 W high beam quality 532 nm green laser based on dual-rod AO Q-switched resonator

A high power, high beam quality, compact green laser based on dual-rod AO Q-switched resonator was designed, fabricated and tested. The laser provided a maximum 532 nm average power of 36.5 W at a repetition rate of 65 kHz with the beam quality factor of M² = 1.55 and the optical frequency conversion efficiency from NIR to green laser was as high as 51%. The pulse repetition rate was tunable from 50 kHz to 200 kHz and the overall dimension of the laser was within 500 × 300 × 150 mm³.     

Optimal design of multimode interference couplers using an improved self-imaging theory

Self-imaging theory is widely accepted as a good method in designing 1 × N multimode interference (MMI) couplers, but it is also true that self-imaging theory is not suitable for low-contrast structures. An improved self-imaging theory is proposed in this paper for the optimal design of low-contrast 1 × N MMI couplers. The average effective width of MMI waveguide and the average effective propagation constant of MMI waveguide are used as the basis to modify the conventional self-imaging theory. A direct calculation of the average effective width of low-contrast MMIs is presented. We use this approach in the optimal design of a 1 × 4 silica MMI coupler, and the results show that the improved self-imaging theory is more accurate than conventional self-imaging theory for low-contrast structures, the results also show that if the material parameters and the width of an MMI waveguide are fixed, the average effective width of the MMI waveguide will increase with the decrease of the height of the core layer.     

Refractive index measurement with long-period gratings arc-induced in pure-silica-core fibres

We have investigated the sensitivity of arc-induced long-period gratings to changes of ambient refractive index. Two pure-silica-core fibres with different cladding diameters and a standard fibre were used in this study. For a 6 × 10⁻³ change of the refractive index, a 240 pm shift of the resonant wavelength was achieved with long-period gratings written in the 125 μm cladding diameter pure-silica-core fibre.     

The analysis of the error statistics in a 5 × 40 Gbit/s fibre link with hybrid amplification

We quantify the error statistics and patterning effects in a 5 × 40 Gbit/s WDM RZ-OOK SMF/DCF fibre link using hybrid Raman/EDFA amplification. By extensive use of a numerical model, we determine how the error statistics change with the transmission distance. This knowledge is used as a basis for a constrained coding technique in order to improve the transmission error rate. We propose an adaptive constrained code for mitigation of the patterning effects and demonstrate that this approach can substantially reduce the bit error rate (BER) even for very large values of the channel BER (BER > 10^− 1). The proposed technique can be used in combination with forward error correction schemes (FEC) to extend the range of channel BERs that an FEC scheme is effective over.     

Investigation of the long-term stability of arc-induced gratings heat treated at high temperatures

A long-period grating written in the SMF-28 fibre was heat treated at 1000 °C for 15 days. The spectrum of the grating shifted to longer wavelengths and the resonances depth decreased as a result of structural relaxation. The background loss increased considerably for times longer than 200 h, and this loss is caused by devitrification of the fibre.     

The nonlinear refraction and nonlinear absorption in 4-(4,6-diaminopyrimidin-2-ylthio) substituted double-decker Lu(III) phthalocyanine

A 4-(4,6-diaminopyrimidin-2-ylthio) substituted double-decker Lu(III) phthalocyanines (4) have been prepared and characterized by elemental analysis, IR, UV-vis and ¹H NMR spectroscopies. The nonlinear refractive index, nonlinear absorption and the optical limiting (OL) performance of the compound 4 in a 0.5 mm spectroscopic cell in DMF solution were investigated by using 4 ns pulse laser at 532 nm. Z-scan experiments have been conducted between 0.24 and 2.39 GW/cm² peak intensities for 10 Hz repetition rate and also between 2.39 and 23.89 GW/cm² peak intensities for 1 Hz repetition rate. The thermal effect contributes to the nonlinear response of the material higher than 0.72 GW/cm² peak intensity at 10 Hz. We measured the effective nonlinear refractive index of the material as 1.2×10⁻¹¹ esu at 3.5×10⁻⁴ M concentration with the peak intensity less than 0.72 GW/cm² and we found that nonlinear absorption was very small. On the other hand, when concentration is increased to 2.4×10⁻³ M material's nonlinear absorption becomes dominant mechanism for the nonlinear response and the compound 4 indicates OL behavior at 2.4×10⁻³ M concentration.     

Characterization of laser induced tantalum plasma by spatio-temporal resolved optical emission spectroscopy

The spatial and temporal behavior of the tantalum plasma produced in air by third harmonic Nd:YAG laser (0.6 GW cm⁻²) has been studied using optical emission spectroscopy. Excitation temperature and electron density have been estimated from the analysis of spectral data as well as their spatio-temporal evolutions. As the delay time increases from 400 to 2000 ns, the excitation temperature has found to decrease from 10,000 K to 7900 K. The value of N_e decreases continuously from 4 × 10¹⁸ near the zero position to 5 × 10¹⁷ in a linear approach along with the propagation axe of the plasma plume. Laser-supported consumption wave regime has been proposed to explain the propagation of the plasma.     

Performance improvement for N × 80-Gb/s WDM transmission link with optimized alternate polarization

In this paper, it is shown that at a high bit rate of 80-Gb/s alternate polarization of adjacent bits in a Wavelength Division Multiplexed (WDM) transmission link improves the system performance in terms of improved Q factor and minimum bit error rate (BER). Alternate Polarization Return to Zero (al-PRZ) further suppresses the non-linear effects at higher power levels of 25 dBm per channel and also improves the transmission length to 640 km for a N × 80-Gb/s WDM system and hence results in an improvement of BER to 10⁻²⁰.     

Upconversion luminescence and optical power limiting effect based on two- and three-photon absorption processes of ZnO crystal

Near-infrared to UV and visible upconversion luminescence was observed in single-crystalline ZnO under an 800 nm infrared femtosecond laser irradiation. The optical properties of the crystal reveal that the UV and VIS emission band are due to the exciton transition (D₀X) bound to neutral donors and the deep luminescent centers in ZnO, respectively. The relationship between the upconversion luminescence intensity and the pump power of the femtosecond laser reveals that the UV emission belongs to three-photon sequential band-to-band excitation and the VIS emission belongs to two-photon simultaneous defect-absorption induced luminescence. A saturation phenomenon and polarization-dependent effect are also observed in the upconversion process of ZnO. A very good optical power limiting performance at 800 nm has been demonstrated. The two- and three-photon absorption coefficients of ZnO crystal were measured to be 0.2018 cm GW⁻¹ and 7.102 × 10⁻³ cm³ GW⁻², respectively. The two- and three-photon cross sections were calculated to be 1.189 × 10⁻⁵¹ cm⁴ s and 1.040 × 10⁻⁸⁰  cm⁶ s², respectively.     

Influence of preparation conditions on the dispersion parameters of sprayed iron oxide thin films

Iron oxide thin films were prepared by spray pyrolysis technique (SPT) at various substrate temperatures (T_sub) and different deposition time. X-ray diffraction (XRD) analysis showed that, at T_sub ≥ 350 °C, a single phase of α-Fe₂O₃ film is formed which has the rhombohedral structure. Moreover, the crystallinity was improved by increasing T_sub. The effect of T_sub as well as deposition time on the optical dispersion of these films has been investigated. The optical transmittance and reflectance measurements were performed by using spectrophotometer in the wavelength range from 300 to 2500 nm. The refractive index was determined by using Murmann's exact equation. It was observed that, the refractive index increased with increasing in both the T_sub and film thickness. The optical dispersion parameters have been evaluated and analyzed by using Wemple-Didomenico equation. The obtained results showed that, the dielectric properties have weak dependencies of growth temperature and film thickness. At T_sub ≥ 350 °C, the average values of oscillator energy, E_o and dispersion energy, E_d were found to be 5.96 and 34.08 eV. While at different thickness, the average values of dispersion energies were found to be 3.93 and 17.08 eV. Also, the average values of oscillator strength S_o and single resonant frequency ω_o were estimated 10.78 × 10¹³ m⁻² and 5.99 × 10¹⁵ Hz, while at different thickness were evaluating 4.81 × 10¹³ m⁻² and 6.11 × 10¹⁵ Hz. Furthermore, the optical parameters such as wavelength of single oscillator λ_o, plasma frequency ω_p, and dielectric constant ? have been evaluated. The carrier concentration N_opt by using Drud's theory was obtained the range of 5.07 × 10²⁵ m⁻³ to 1.04 × 10²⁶ m⁻³.     

Large negative refractive index modification induced by irradiation of femtosecond laser inside optical glasses

We report on the refractive index modification (Δn) and its cross sectional profile of the created lines inside the different types of optical glasses, containing BaO, TiO₂, or La₂O₃ as a metal oxide. The lines were fabricated by scanning a stage and focusing the femtosecond laser pulses, 800 nm wavelength, a 250 kHz repetition rate and 200 fs pulse duration, from the Ti:sapphire regenerative amplifier system. The Δn measurements were performed with the qualitative phase microscopy technique. As a result, it was found that the Δn and its sign are different depending on glass types. For example, in the glasses containing TiO₂, the Δn became smaller in the modified region and some of them showed relatively large decrease of the Δn, Δn < −0.01, with about 10 μm width. Such a glass material could be useful for the compact optics and optical devices.     

Multipulse irradiation of silicon by femtosecond laser pulses: Variation of surface morphology

The multipulse interaction of ultraviolet femtosecond laser pulses with silicon and generation of surface structures in a large area spot (?1 mm²) has been studied. The evolution of multiscale structures at the constant fluence strongly depends on the number of pulses, N. For N < 200, the “carpet-like” pattern of nano-, and micro-spikes is generated by the bubble explosion in a thin surface foam layer. The accumulation of bubbles and their explosion due to repetition of laser pulses cause damped membrane-like oscillations of the silicon surface. For 200 ≤ N, bifurcation of surface morphology takes place: (i) the surface tension waves of the wavelength ∼200 μm appear in the peripheral region of the spot. Generated by the surface thermal gradient in the liquid foam layer, they spread from the hot centerline towards the periphery of the spot. The change of their wavelength with propagation distance indicates onset of the Eckhaus instability caused by the phase modulation in multipulse interaction. (ii) Deep caverns appear in a highly superheated silicon layer in the central region of the spot due to the fast gas-liquid phase separation and the fragmentation process.     

Laser fluence, repetition rate and pulse duration effects on paint ablation

The efficiency (mm³/(J pulse)) of laser ablation of paint was investigated with nanosecond pulsed Nd:YAG lasers (λ = 532 nm) as a function of the following laser beam parameters: pulse repetition rate (1-10,000 Hz), laser fluence (0.1-5 J/cm²) and pulse duration (5 ns and 100 ns). In our study, the best ablation efficiency (η ≅ 0.3 mm³/J) was obtained with the highest repetition rate (10 kHz) at the fluence F = 1.5 J/cm². This ablation efficiency can be associated with heat accumulation at high repetition rate, which leads to the ablation threshold decrease. Despite the low thermal diffusivity and the low optical absorption of the paint (thermal confinement regime), the ablation threshold fluence was found to depend on the pulse duration. At high laser fluence, the ablation efficiency was lower for 5 ns pulse duration than for the one of 100 ns. This difference in efficiency is probably due to a high absorption of the laser beam by the ejected matter or the plasma at high laser intensity. Accumulation of particles at high repetition rate laser ablation and surface shielding was studied by high speed imaging.     

Cardinality enhancement of spectral/spatial modified double weight code optical code division multi-access system by PIIN suppression

A new two-dimensional (2-D) optical code division multiple access (OCDMA) scheme to increase the achievable system capacity is proposed. The code exhibits good cross-correlation property time and wavelength shift. Performances are analyzed on code size and correlation properties affecting two important system parameters, bit error rate (BER) as a function of cardinality generated and optical power transmission requirement. The proposed system can effectively suppress phase-induced intensity noise (PIIN) and has multi-access interference (MAI) cancellation property. Results in a good agreement indicate that 2-D modified double weight (MDW) offers 163.7% and 336.2% larger cardinality compare to 2-D perfect difference code (PDC) and 2-D modified quadratic congruence (MQC) code. By increasing spatial code (N) and keeps similar code length system performance can be further optimized. 2-D MDW (M = 45, N = 18) accommodates 252.2% and 18.3% cardinality increment and low effective transmitted power (P_sr) at −17.9 dBm, compare to 2-D MDW (M = 247, N = 3) and (M = 84, N = 9) at 10⁻⁹ BER error floor. The architecture of the spectral/spatial MDW OCDMA system with property of MAI cancellation is presented.     

Photoluminescence and optical properties of He ion bombarded ultra-high molecular weight polyethylene

Ion bombardment is a suitable tool to improve the physical and chemical properties of polymer surface. In this study UHMWPE samples were bombarded with 130 keV He ions to the fluences ranging from 1 × 10¹² to 1 × 10¹⁶ cm⁻². The untreated and ion beam modified samples were investigated by photoluminescence, and ultraviolet-visible (UV-vis) spectroscopy. Remarkable decrease in integrated luminescence intensity with increasing ion fluences was observed. The reduction in PL intensity with increase of ion fluence might be attributed to degradation of polymer surface and formation of defects. The effect of ion fluence on the optical properties of the bombarded surfaces was characterized. The values of the optical band gap E_g, and activation energy E_a were determined from the optical absorption. The width of the tail of the localized states in the band gap (E_a) was evaluated using the Urbach edge method. With increasing ion fluences a decrease in both the energy gap and the activation energy were observed. Increase in the numbers of carbon atoms (N) in a formed cluster with increasing the He ion fluence was observed.     

Optical spectroscopy, 1.5 μm emission and up-conversion properties of Er-doped Li3Ba2Gd3(MoO4)8 crystal

Er³⁺:Li₃Ba₂Gd₃(MoO₄)₈ crystal has been grown from a melt of Li₂MoO₄ by the top seeded solution growth method (TSSG). The polarized spectral properties of Er³⁺:Li₃Ba₂Gd₃(MoO₄)₈ crystal were investigated and the spectroscopic parameters were calculated and analyzed based on the Judd-Ofelt (J-O) theory. The emission cross-sections were calculated by the Fuchtbauer-Ladenburg (F-L) equation and the peak values of the emission band at 1535 nm were 9.7×10⁻²¹, 7.9×10⁻²¹ and 8.4×10⁻²¹ cm² for E∥b, E∥D1 and E∥D2, respectively. Under 977 nm excitation five up-conversion fluorescence bands around 490, 530, 550, 660 and 800 nm were observed, and the possible up-conversion mechanisms were proposed.     

Ring resonator with multimode waveguide turning-mirror couplers in InGaAsP-InP

Compact In_0.67Ga_0.33As_0.6P_0.4/In_0.71Ga_0.29As_0.74P_0.26 on InP single ring resonators incorporating 2 × 2 multimode interference (MMI) turning-mirror couplers with cross coupling factor of 0.15 have been demonstrated. The form of race tracks is a 15-degree arc of 260 μm radius joined with a 60-degree arc of 110 μm radius, and finished with another 15-degree arc of 260 μm radius. The MMI turning-mirror coupler of 128 μm in length is used in the single ring resonators, which correspond to free spectral ranges of 82 GHz. A contrast of 4 dB, a finesse of nearly 3 and full-width at half-maximum (FWHM) of 0.24 nm for the drop port have been achieved in this single ring resonator. From the experimental value T_max/T_min of 21 dB, the experiment coupling factor coincides with the simulation.     

Nanostructural pulse laser-deposited Ag(Tl)SbS semiconductor thin films: Growth dynamics, structural and electrical properties

Ag₃SbS₃ semiconductor material is an attractive substance for different optoelectronic and data storage applications [D. Adler, M.S. Shur, M. Silver, S.R. Ovchinsky, J. Appl. Phys. 51 (1979) 3289]. The most reliable way to get thin films with proper quality is the pulse laser deposition (PLD) technology. The paper reports data on growth dynamics (electron microscopic experiments (EME) performed in situ in order to clarify structural features of the films under PLD process), X-ray diffraction (XRD) investigations and room temperature current-voltage (IVC) characteristics. The sets of investigated samples were prepared by Nd:IAG laser. Films were deposited under substrate temperatures T = 300 K and T = 400 K and at different pulse repetition frequencies. EME studies revealed time-dependent changes of the grown films’ structure occurring under stationary pulse repetition frequency and the substrate temperature. The structure of the films was identified as an amorphous with nanoscale crystalline phase inclusions (there are results of the XRD studies). The IVCs investigations performed at the room temperature and under applied bias up to 10 V in both directions showed a domination of tunneling current for all samples under study.     

1097 nm Nd:YVO4 self-Raman laser

An acousto-optically Q-switched self-Raman laser emitting at 1097 nm is demonstrated with a c-cut Nd:YVO₄ crystal, using a fiber-coupled 880 nm diode laser as the pumping source. Raman laser performances in concave-plane and plane-plane oscillating cavities are studied and compared. With an absorbed diode power of 12.4 W and a pulse repetition rate of 50 kHz, the highest output power of 1.45 W is obtained from the plane-plane cavity, corresponding to an optical-to-optical conversion efficiency of 11.7%.     

A high power hybrid mid-IR laser source

An efficient hybrid mid-IR laser system comprising a thulium fibre laser, Ho:YAG solid state laser and a zinc germanium phosphide optical parametric oscillator is presented. A 790 nm diode pumped 1908 nm thulium fibre laser operating at 30 W pumps an RTP q-switched Ho:YAG laser emitting 17 W at 40 kHz and 2090 nm. The zinc germanium phosphide optical parametric oscillator efficiently converts this into the 3-5 μm region producing 10.1 W with 59% optical conversion efficiency and an M² = 1.5.