Comparative investigations of the P-V-T relationship of NaCl at high pressure and temperature

Two different potential models of molecular dynamics (MD) simulations have been applied to investigate the pressure-volume-temperature (P-V-T) relationship and lattice parameter of NaCl under high pressure and temperature. The first one is the shell model (SM) potentials in which due to the short-range interaction pairs of ions are moved together as is the case in polarization of a crystal due to the motion of the positive and negative ions, and the second one is the two-body rigid-ion Born-Mayer-Huggins-Fumi-Tosi (BMHFT) potentials with full treatment of long-range Coulomb forces. The P-V relationship at 300 K, T-V relationship at zero pressure, and lattice parameter a, have been obtained and compared with the available experimental data and other theoretical results. Compared with SM potentials, the MD simulation with BMHFT potentials is very successful in reproducing accurately the measured volumes of NaCl. At an extended pressure and temperature ranges, P-V relationship under different isotherms at selected temperatures, T-V relationship under different pressures, and lattice parameter a have also been predicted. The properties of NaCl are summarized in the pressure range 0-30 GPa and the temperature up to 2000 K.     

Simulated equation of state of CaF2 with fluorite-type structure at high temperature and high pressure

The pressure-volume-temperature (P-V-T) equation of state (EOS), isothermal bulk modulus, and thermal expansivity of CaF₂ with cubic fluorite-type structure are investigated using the constant temperature and pressure shell model molecular dynamics (MD) method with effective pair potentials which consist of the Coulomb, dispersion, and repulsion interaction. It was shown that MD simulation is very successful in accurately reproducing the measured volumes of the CaF₂ over a wide range of pressures. The simulated P-V data matched X-ray diffraction experimental results up to 9.5 GPa at 300 K. In addition, volume thermal-expansion coefficient and isothermal bulk modulus were also calculated and compared with available experimental data and the latest theoretical results at ambient condition. At extended temperature and pressure ranges, The P-V EOS under different isotherms at selected temperatures, T-V EOS under different isobars at selected pressures, thermal expansivity, and isothermal bulk modulus were predicted up to 1500 K and 10 GPa. The detailed knowledge of thermodynamic behavior and EOS at extreme conditions are of fundamental importance to the understanding of the physical properties of CaF₂.     

Analysis of P-V-T relationships and thermodynamic properties for some alkali halides

In this paper, Pandey approximation for the volume dependence of Anderson-Grüneisen parameter at fixed pressure, Anderson approximation for the temperature dependence of thermal expansivity, the equations of thermal expansivity along isobars derived by Shanker et al., and the presented approximation for the volume dependence of Anderson-Grüneisen parameter along isobars, have been used to study and predict the pressure-volume-temperature (P-V-T) data and the variations of the volume expansion coefficient and isothermal bulk modulus with temperature and pressure for NaCl, CsCl, LiF, NaF crystals, up to 30 GPa and in the temperature range 298-1073 K. The calculated values are compared with each other. It is found that these equations-of-state are valid and present good agreement with the available experimental data.     

Effects of pressure and temperature on the isothermal bulk modulus of CaO

Molecular dynamics (MD) simulations have been performed to investigate the effects of pressure and temperature on the isothermal bulk modulus of CaO using pair-wise interactions that include polarization effects through the shell model (SM). The dependence of isothermal bulk modulus B_T of CaO on the compression ratio V/V₀ and pressure P have been obtained from MD runs at T=300 K, and compared with the available experimental data and other theoretical results. A good agreement between theory and experiment is obtained. Meanwhile, B_T dependence on temperature T at zero pressure is investigated. At extended pressure and temperature ranges, SM-MD method has also been carried out for predicting the P-V-T equation of state and isothermal bulk modulus at different temperatures along the isotherms 0, 1000, 2000, 3000, and 4000 K, and at different pressures along the isobars 5, 15, 30, 40, and 50 GPa for CaO, respectively.     

Elastic, thermal and structural properties of platinum

The thermal equation of state (EOS) for platinum has been calculated to 300 GPa and 3000 K using ab initio molecular dynamics employing the local density approximation (LDA) and the projector augmented-wave methods (PAW). Direct ab initio molecular dynamics avoids the simplifying assumptions inherent in empirical treatments of thermoelasticity. A third-order Birch-Murnaghan equation EOS fitted to the 300 K data yielded an isothermal bulk modulus of B_T0=290.8 GPa and a pressure derivative of B_T′=5.11, which are in better agreement with the measured values than those obtained by previous calculations. The high-temperature data were fitted to a thermal pressure EOS and a Mie-Grüneisen-Debye EOS. The resulting calculated thermal expansion coefficient, α₀, temperature derivative of the isothermal bulk modulus, (∂B_T/∂T)_V, and second temperature derivative of the pressure, (∂²P/∂T²)_V, were 1.94×10⁻⁵ K⁻¹, −0.0038 GPa K⁻¹, and 1.7×10⁻⁷ GPa² K⁻², respectively. A fit to the Mie-Grüneisen-Debye EOS yielded values for the Grüneisen parameter, γ₀, and its volume dependence parameter, q, of 2.18 and 1.75, respectively. An analysis of our data revealed a strong volume dependence of the thermal pressure of platinum. We also present a qualitative analysis of the effects of intrinsic anharmonicity from the calculated Grüneisen parameter at high temperatures.     

Theoretical Study of Compressibility and Thermoelasticity of LaNi5-xAlx （x= 0.3, 0.5 and 1.0）

The compressibility, the temperature dependence of bulk modulus, the pressure dependence of normalized volume V/V0, thermal expansion coefficient and Debye temperature of LaNi5-xAlx compounds are successfully obtained using the first-principles plane-wave pseudopotential （PW-PP） method, the EOSFIT6.0 software and the quasiharmonic Debye model. The rapid decrease of relative lattice constant a/a0 shows that the deformation is easier in directions normal to the c-axis than that along it. The relationships between bulk modulus B and pressure at different temperatures are also analysed. It is found that the bulk modulus B increases monotonically with increasing pressure. Moreover, the pressure dependences of thermal expansion and Debye temperature are also successfully obtained. The calculated results are in agreement with the experimental data.     

The effects of annealing on Au/pyronine-B/MD n-InP Schottky structure

Thin film of non-polymeric organic compound pyronine-B has been fabricated on moderately doped (MD) n-InP substrate as an interfacial layer using spin coating technique for the electronic modification of Au/MD n-InP Schottky contact. The electrical characteristics have been determined at room temperature. The barrier height and the ideality factor values for Au/pyronine-B/MD n-InP Schottky diode have been obtained from the forward bias I-V characteristics at room temperature as 0.60 eV and 1.041; 0.571 and 1.253 eV after annealing at 100 and 250 °C, respectively. An increase in annealing temperature at the Au/n-InP Schottky junction is shown to increase the reverse bias leakage current by about one order of magnitude and decrease the Schottky barrier height by 0.027 eV. Furthermore, the barrier height values for the Au/pyronine-B/MD n-InP Schottky diode have also been obtained from the C-V characteristics at room temperature as 1.001 and 0.709 eV after annealing at 100 and 250 °C, respectively. Finally, it was seen that the diode parameters changed with increase in the annealing temperature.     

Thermodynamic and magnetic properties of LaSn3

Thermal expansion coefficient between 77 and 900K, isothermal compressibility in the 0–80 Kbar pressure range, magnetic susceptibility between 77 and 1300 K and heat capacity at constant pressure in the 20–300 K temperature range were determined for the LaSn₃ compound. From the experimental data, the specific heat at constant volume was calculated and the thermal dependence of the Debye's parameter θ_D was obtained. The electron contribution to the heat capacity was also determined from the high temperature data. The magnetic properties confirm that there is no evidence of the existence of a magnetic moment localized on La atoms, in contrast with a previous report and in agreement with the general assumptions. A little anomaly found in the expansion coefficient, in the isothermal compressibility and in the specific heat is discussed in terms of a lattice order-disorder phenomenon.     

Investigation of thermodynamic properties of cerium dioxide by statistical moment method

The thermodynamic properties of the cerium dioxide (CeO₂) are studied using the statistical moment method, including the anharmonicity effects of thermal lattice vibrations. The free energy, linear thermal expansion coefficient, bulk modulus, specific heats at the constant volume and those at the constant pressure, C_V and C_P, are derived in closed analytic forms in terms of the power moments of the atomic displacements. The temperature dependence of the thermodynamic quantities of cerium dioxide is calculated using three different interatomic potentials. The influence of dipole polarization effects on the thermodynamic properties and thermodynamic stability of cerium dioxide have been studied in detail.     

First principles studies of elastic and thermodynamic properties of fcc-VH2 with pressure and temperature

In this work, we study elastic and thermodynamic properties of VH₂ at different pressures and temperatures. Elastic constants and bulk modulus of VH₂ decrease with increase in temperature, and hence increase with pressure. Thermal expansion of the crystal lattice will be suppressed by high pressure. When the temperature is 1500 K, 15.99 GPa of pressure can completely restrain the volume expansion caused by temperature. At a given pressure, the lower the temperature, the easier the cell compression. At low temperatures, C_v is proportional to T³, and C_v tends to the Dulong-Petit limit at higher temperatures. The Debye temperature increases with pressure, but decreases with temperature. At low temperature and low pressure, thermal expansion coefficient increases sharply with temperature. At high temperature and high pressure, the increasing trend slows down.