The method of feed-in energy on disc brake squeal

Brake squeal is studied in this paper by feed-in energy analysis. Based on the brake closed-loop coupling model, a calculation method of feed-in energy for squeal mode is derived. Result of the feed-in energy indicates squeal tendency of the brake system, while formula for calculating it discloses the relation among brake squeal phenomenon and structural parameters, such as frictional coefficient, geometric shape of brake pads, elastic modulus of frictional material, substructure modal shape, etc. The method also helps to analyze the effectiveness of various structural modification schemes attempted to eliminate the squeal noise. Finally, this method is illustrated by application to a typical squealing disc brake.     

Analysis of disc brake squeal using the complex eigenvalue method

A new functionality of ABAQUS/Standard, which allows for a nonlinear analysis prior to a complex eigenvalue extraction in order to study the stability of brake systems, is used to analyse disc brake squeal. An attempt is made to investigate the effects of system parameters, such as the hydraulic pressure, the rotational velocity of the disc, the friction coefficient of the contact interactions between the pads and the disc, the stiffness of the disc, and the stiffness of the back plates of the pads, on the disc squeal. The simulation results show that significant pad bending vibration may be responsible for the disc brake squeal. The squeal can be reduced by decreasing the friction coefficient, increasing the stiffness of the disc, using damping material on the back plates of the pads, and modifying the shape of the brake pads.     

Brake squeal reduction of vehicle disc brake system with interval parameters by uncertain optimization

An uncertain optimization method for brake squeal reduction of vehicle disc brake system with interval parameters is presented in this paper. In the proposed method, the parameters of frictional coefficient, material properties and the thicknesses of wearing components are treated as uncertain parameters, which are described as interval variables. Attention is focused on the stability analysis of a brake system in squeal, and the stability of brake system is investigated via the complex eigenvalue analysis (CEA) method. The dominant unstable mode is extracted by performing CEA based on a linear finite element (FE) model, and the negative damping ratio corresponding to the dominant unstable mode is selected as the indicator of instability. The response surface method (RSM) is applied to approximate the implicit relationship between the unstable mode and the system parameters. A reliability-based optimization model for improving the stability of the vehicle disc brake system with interval parameters is constructed based on RSM, interval analysis and reliability analysis. The Genetic Algorithm is used to get the optimal values of design parameters from the optimization model. The stability analysis and optimization of a disc brake system are carried out, and the results show that brake squeal propensity can be reduced by using stiffer back plates. The proposed approach can be used to improve the stability of the vehicle disc brake system with uncertain parameters effectively.     

Automotive disc brake squeal

Disc brake squeal remains an elusive problem in the automotive industry. Since the early 20th century, many investigators have examined the problem with experimental, analytical, and computational techniques, but there is as yet no method to completely suppress disc brake squeal. This paper provides a comprehensive review and bibliography of works on disc brake squeal. In an effort to make this review accessible to a large audience, background sections on vibrations, contact and disc brake systems are also included.     

A new treatment for predicting the self-excited vibrations of nonlinear systems with frictional interfaces: The Constrained Harmonic Balance Method,with application to disc brake squeal

Brake squeal noise is still an issue since it generates high warranty costs for the automotive industry and irritation for customers. Key parameters must be known in order to reduce it. Stability analysis is a common method of studying nonlinear phenomena and has been widely used by the scientific and the engineering communities for solving disc brake squeal problems. This type of analysis provides areas of stability versus instability for driven parameters, thereby making it possible to define design criteria. Nevertheless, this technique does not permit obtaining the vibrating state of the brake system and nonlinear methods have to be employed. Temporal integration is a well-known method for computing the dynamic solution but as it is time consuming, nonlinear methods such as the Harmonic Balance Method (HBM) are preferred. This paper presents a novel nonlinear method called the Constrained Harmonic Balance Method (CHBM) that works for nonlinear systems subject to flutter instability. An additional constraint-based condition is proposed that omits the static equilibrium point (i.e. the trivial static solution of the nonlinear problem that would be obtained by applying the classical HBM) and therefore focuses on predicting both the Fourier coefficients and the fundamental frequency of the stationary nonlinear system.The effectiveness of the proposed nonlinear approach is illustrated by an analysis of disc brake squeal. The brake system under consideration is a reduced finite element model of a pad and a disc. Both stability and nonlinear analyses are performed and the results are compared with a classical variable order solver integration algorithm.Therefore, the objectives of the following paper are to present not only an extension of the HBM (CHBM) but also to demonstrate an application to the specific problem of disc brake squeal with extensively parametric studies that investigate the effects of the friction coefficient, piston pressure, nonlinear stiffness and structural damping.     

Modeling of automotive drum brakes for squeal and parameter sensitivity analysis

Many fundamental studies have been conducted to explain the occurrence of squeal in disc and drum brake systems. The elimination of brake squeal, however, still remains a challenging area of research. Here, a numerical modeling approach is developed for investigating the onset of squeal in a drum brake system. The brake system model is based on the modal information extracted from finite element models for individual brake components. The component models of drum and shoes are coupled by the shoe lining material which is modeled as springs located at the centroids of discretized drum and shoe interface elements. The developed multi degree of freedom coupled brake system model is a linear non-self-adjoint system. Its vibrational characteristics are determined by a complex eigenvalue analysis. The study shows that both the frequency separation between two system modes due to static coupling and their associated mode shapes play an important role in mode merging. Mode merging and veering are identified as two important features of modes exhibiting strong interactions, and those modes are likely candidates that lead to coupled-mode instability. Techniques are developed for a parameter sensitivity analysis with respect to lining stiffness and the stiffness of the brake actuation system. The influence of lining friction coefficient on the propensity to squeal is also discussed.     

EXPERIMENTAL ACTIVE CONTROL OF AUTOMOTIVE DISC BRAKE ROTOR SQUEAL USING DITHER

This paper presents an experimental investigation into the application of “dither” control for the active control and suppression of automobile disc brake squeal. Dither control is characterized by the application of a control effort at a frequency higher than the disturbance to be controlled. In the particular system considered here, a vibro-acoustic analysis of a disc brake system during squeal determined the acoustic squeal signature to be emanating from the brake rotor. This squeal was eliminated, and could even be prevented from occurring, through the application of a harmonic force with a frequency higher than the squeal frequency. The harmonic force was generated by a stack of piezoelectric elements placed within the brake's caliper piston. The harmonic force represented a small variation about the mean clamping force exerted by the brake upon the rotor. The high-frequency vibration in the brake system due to the action of the control system was not heard if an ultrasonic control frequency was used. More importantly, the active control system is shown to be able to prevent squeal from even occurring. This gives rise to a possible active control system integrated into the brake system of automobiles to prevent squeal.     

LINING-DEFORMATION-INDUCED MODAL COUPLING AS SQUEAL GENERATOR IN A DISTRIBUTED PARAMETER DISC BRAKE MODEL

A distributed-parameter model of a disc brake is developed, which is used for simulation of friction-induced vibrations in the form of high-frequency squeal. The effect of different squeal generation mechanisms is investigated. The comparison of measured and calculated frequencies shows a good agreement and this study indicates that lining-deformation-induced modal coupling can act as a squeal generator in disc brakes.     

Finite element modelling for the investigation of in-plane modes and damping shims in disc brake squeal

Squeal propensity of the in-plane modes and the constrained-layer type damping shims for disc brake system is investigated by using the finite element method. Theoretical formulation is derived for a rotating disc in contact with two stationary vibrating pads attached to the damping shim components. By the conversion from the theoretical to FE brake model, the full equations of motion for the actual disc brake system describes the disc rotation, the in-plane friction characteristics and damping shims in association with squeal vibration. It is concluded from the results that the in-plane torsion modes can be generated by the negative friction slope, but they cannot be controlled by the damping shims. The in-plane radial mode is also investigated and found to be very insensitive in squeal generation.     

Suppression of brake squeal noise applying finite element brake and pad model enhanced by spectral-based assurance criteria

An enhanced dynamic finite element (FE) model with friction coupling is applied to analyze the design of disc brake pad structure for squeal noise reduction. The FE model is built-up from the individual brake component representations. Its interfacial structural connections and boundary conditions are determined by correlating to a set of measured frequency response functions using a spectral-based assurance criterion. The proposed friction coupling formulation produces an asymmetric system stiffness matrix that yields a set of complex conjugate eigenvalues. The analysis shows that eigenvalues possessing positive real parts tend to produce unstable modes with the propensity towards the generation of squeal noise. Using a proposed lumped parameter model and eigenvalue sensitivity study, beneficial pad design changes can be identified and implemented in the detailed FE model to determine the potential improvements in the dynamic stability of the system. Also, a selected set of parametric studies is performed to evaluate numerous design concepts using the proposed dynamic FE model. The best pad design attained, which produces the least amount of squeal response, is finally validated by comparison to a set of actual vehicle test results.     

Chaos in brake squeal noise

Brake squeal has become an increasing concern to the automotive industry because of warranty costs and the requirement for continued interior vehicle noise reduction. Most research has been directed to either analytical and experimental studies of brake squeal mechanisms or the prediction of brake squeal propensity using finite element methods. By comparison, there is a lack of systematic analysis of brake squeal data obtained from a noise dynamometer. It is well known that brake squeal is a nonlinear transient phenomenon and a number of studies using analytical and experimental models of brake systems (e.g., pin-on-disc) indicate that it could be treated as a chaotic phenomenon. Data obtained from a full brake system on a noise dynamometer were examined with nonlinear analysis techniques. The application of recurrence plots reveals chaotic structures even in noisy data from the squealing events. By separating the time series into different regimes, lower dimensional attractors are isolated and quantified by dynamic invariants such as correlation dimension estimates or Lyapunov exponents. Further analysis of the recurrence plot of squealing events by means of recurrence quantification analysis measures reveals different regimes of laminar and random behaviour, periodicity and chaos-forming recurrent transitions. These results help to classify brake squeal mechanisms and to enhance understanding of friction-related noise phenomena.     

Squeal and chatter phenomena generated in a mountain bike disc brake

This paper examines squeal and chatter phenomena generated experimentally in mountain bike disc brakes. There are two kinds of frictional self-excited vibrations in the bike disc brakes, called squeal with frequency of 1 kHz and chatter with frequency of 500 Hz. In order to reproduce the squeal and chatter, a bench test apparatus using an actual bike was set up to determine the associated frequency characteristics experimentally. The results show the frequencies to be independent of pad temperature and disc rotating speed. Squeal is shown to be in-plane vibration in the direction of the disc surface which is caused by the frictional characteristics having negative slope with respect to the relative velocity in the vibrating system, which includes brake unit, spokes and hub. Chatter is generated within a limited high temperature region. Again, it is frictional vibration in which the squeal and out-of-plane vibration of the disc due to Coulomb friction combine through the internal resonance relation between in-plane and out-of-plane nonlinear vibration caused by the temperature increase of the disc during braking.     

Brake squeal: a literature review

Brake squeal, which usually falls in the frequency range between 1 and 16 kHz, has been one of the most difficult concerns associated with automotive brake systems since their inception. It causes customer dissatisfaction and increases warranty costs. Although substantial research has been conducted into predicting and eliminating brake squeal since the 1930s, it is still rather difficult to predict its occurrence. In this paper, the characteristics and current difficulties encountered in tackling brake squeal are first described. A review of the analytical, experimental and numerical methods used for the investigation of brake squeal is then given. Some of the challenges facing brake squeal research are outlined.     

Minimal models for disk brake squeal

Numerous publications on the modeling of disk brake squeal can be found in the literature. Recent publications describe the onset of disk brake squeal as an instability of the trivial solution resulting from the non-conservative friction forces even for a constant friction coefficient. Therefore, a minimal model of disk brake squeal must contain at least two degrees of freedom. A literature review of minimal models shows that there is still a lack of a minimal model describing the basic behavior of disk brake squeal which can easily be associated to an automotive disk brake.Therefore, a new minimal model of a disk brake is introduced here, showing an obvious relation to the technical system. In this model, the vibration of the disk is taken into account, as it plays a dominant role in brake squeal. The model is analyzed with respect to its stability behavior, and consequences in using it in the optimization of disk brake systems are discussed.     

Structural optimization of an asymmetric automotive brake disc with cooling channels to avoid squeal

Brake squeal is still a major issue in the automotive industry due to comfort complaints of passengers and resulting high warranty costs. Many measures to avoid squeal have been discussed in the engineering community reaching from purely passive measures like the increase of damping, e.g. by the application of shims, to the active or semiactive suppression of squeal. While active measures can be effective but are elaborate and therefore more expensive, passive measure are less complex in most cases. This leads to the necessity to develop passive, economic and robust measures to avoid squeal. Asymmetry of the brake rotor has been proposed to achieve this goal and the resulting split of all double eigenfrequencies of the brake rotor has lately been shown to stabilize the system.     

Analysis of brake squeal noise using the finite element method: A parametric study

Brake squeal noise has been under investigation by automotive manufacturers for decades due to consistent customer complaints and high warranty costs. J.D. Power surveys consistently show brake noise as being one of the most critical vehicle quality measurements. Furthermore, the development of methods to predict noise occurrence during the design of a brake system has been the target of many researchers in recent years.This paper summarizes the application of complex eigenvalue analysis in a finite element model of a commercial brake system. The effect of the operational parameters (friction coefficient, braking pressure and brake temperature) and wear on the dynamic stability of the brake system is examined. After identifying unstable frequencies and the behavior of the brake system under different conditions, the performance of some control methods are tested. Changes in material properties and the application of brake noise insulators are presented and their effects discussed.The results show that the effect of brake temperature changes the coupling mechanisms between rotor and pad, which in some cases can be useful in order to reduce the instabilities and generated noise. Wear is an operational condition that has an strong effect on the system instability, since stiffness properties of brake pads are influenced by the changes on geometry and on the friction material, leading to high-frequency noise generation when the system is in the end of its lifetime. Application of brake insulators requires a detailed investigation of the system since, for some cases, an increase on the system damping does not balance changes on stiffness, leading the system to instability and noise.     

Performances of some reduced bases for the stability analysis of a disc/pads system in sliding contact

The complex eigenvalue analysis is a widely used technique to investigate the stability of a dynamical system with frictional contact. In the case of brake systems, it is the most frequently employed method to study the propensity of the brake to generate squeal noise. When finite element models are considered, iterative solvers are needed to calculate the complex modes and eigenvalues with good precision. In practice, reduced real bases are often used in order to reduce the computational times. However, great attention should be focused on the errors introduced by the reduction, which is rarely done. In this paper, the performances of some reduced bases are investigated in the case of a simple disc/pads system. Bases composed of real coupled modes and bases provided by Component Mode Synthesis (CMS) techniques are tested. An enrichment of these bases is proposed in order to improve the precision of the results. In particular, new rubbing attachment modes are proposed to adapt free-interface CMS techniques to frictional contact. When real coupled modes are used, it is suggested to complete the basis by the static response to a first-order approximation of the friction forces. Applied to the disc/pads model, the different enrichment options allow a reduction of the errors on frequencies, divergence rates and mode shapes by a factor comprised between 10 and 100 without significantly increasing the computational times.     

Numerical study of friction-induced instability and acoustic radiation – Effect of ramp loading on the squeal propensity for a simplified brake model

This paper presents a numerical study of the influence of loading conditions on the vibrational and acoustic responses of a disc brake system subjected to squeal. A simplified model composed of a circular disc and a pad is proposed. Nonlinear effects of contact and friction over the frictional interface are modelled with a cubic law and a classical Coulomb?s law with a constant friction coefficient. The stability analysis of this system shows the presence of two instabilities with one and two unstable modes that lead to friction-induced nonlinear vibrations and squeal noise. Nonlinear time analysis by temporal integration is conducted for two cases of loadings and initial conditions: a static load near the associated sliding equilibrium and a slow and a fast ramp loading. The analysis of the time responses shows that a sufficiently fast ramp loading can destabilize a stable configuration and generate nonlinear vibrations. Moreover, the fast ramp loading applied for the two unstable cases generates higher amplitudes of velocity than for the static load cases. The frequency analysis shows that the fast ramp loading generates a more complex spectrum than for the static load with the appearance of new resonance peaks. The acoustic responses for these cases are estimated by applying the multi-frequency acoustic calculation method based on the Fourier series decomposition of the velocity and the Boundary Element Method. Squeal noise emissions for the fast ramp loading present lower or higher levels than for the static load due to the different amplitudes of velocities. Moreover, the directivity is more complex for the fast ramp loading due to the appearance of new harmonic components in the velocity spectrum. Finally, the sound pressure convergence study shows that only the first harmonic components are sufficient to well describe the acoustic response.