A Diffusion Model of Field-Induced Aggregation in Ferrofluid Film

By introducing Arrhenius behaviour to the ferroparticles on the surface of the aggregated columnar structure in a diffusion model, equilibrium equations are set up. The solution of the equations shows that to keep the aggregated structures stable, a characteristic field is needed. The aggregation is enhanced by magnetic fields, yet suppressed as the temperature increases. Analysing the influence of the magnetic field on the interaction energy between the dipolar particles, we estimate the portion of the diffusing particles, and provide the agreeable ratio of the column radius over the centre-to-centre spacing between columns in a hexagonal columnar structure formed under a perpendicular magnetic field.     

Dynamical stability of dipolar condensate in a parametrically modulated one-dimensional optical lattice

We study the stabilization properties of dipolar Bose–Einstein condensate in a deep one-dimensional optical lattice with an additional external parametrically modulated harmonic trap potential. Through both analytical and numerical methods, we solve a dimensionless nonlocal nonlinear discrete Gross–Pitaevskii equation with both the short-range contact interaction and the long-range dipole–dipole interaction. It is shown that, the stability of dipolar condensate in modulated deep optical lattice can be controled by coupled effects of the contact interaction, the dipolar interaction and the external modulation. The system can be stabilized when the dipolar interaction, the contact interaction, the average strength of potential and the ratio of amplitude to frequency of the modulation satisfy a critical condition. In addition, the breather state, the diffused state and the attractive-interaction-induced-trapped state are predicted. The dipolar interaction and the external modulation of the lattice play important roles in stabilizing the condensate.     

Evolution of structure and magnetic properties in PrCo_5 magnet for high energy ball milling in ethanol

High energy ball milling(HEBM) is employed to produce nano-sized grains and particles. In this paper, the structure and magnetic properties are investigated in PrCo5 alloy for HEBM in an ethanol milling medium. With the increase of milling time, the grain size reduces and the coercivity increases. For a milling time of less than 30 min, the hysteresis loop of the aligned sample is very different from that of the un-aligned sample and it does not show a large decrease in magnetization slope, indicating a relatively good alignment of easy axes in particles due to the fact that the texture is nearly well preserved. However, when the milling time is further prolonged, the textured structure deteriorates in the powders.Even though exchange coupling exists between grains within the particle, the magnetic properties are exchange-decoupled between particles and the dipolar interaction results in a negative value of δ m in the whole range of the magnetic field.     

Switching Behaviour of Magnetic Particles with Dipolar Interaction

We study the switching in the magnetic moments of interacting magnetic particles. The dynamics of the magnetic moments is governed by a coupled set of Landau-Lifshitz-Gilbert equations. The magnetic particles are assumed to be spherical in shape, single domain, and have uniaxial anisotropy. Effects of dipolar interaction between the particles, anisotropy energy, an applied switching field with finite spatial extent and a small bias field are considered. When the separation between the particles is small, the dipolar field is significant and it affects the reversal of the magnetic moments. The final configuration attained depends sensitively on the decaying length of the switching field, the inter-particle separation, and the initial configuration. A bias field tends to suppress the effects of a spatially decaying switching field and dipolar interaction between neighbouring particles.     

Manipulation of plasmonic wavefront and light–matter interaction in metallic nanostructures: A brief review

The control and application of surface plasmons （SPs）, is introduced with particular emphasis on the manipulation of the plasmonic wavefront and light-matter interaction in metallic nanostructures. We introduce a direct design methodology called the surface wave holography method and show that it can be readily employed for wave-front shaping of near-infrared light through a subwavelength hole, it can also be used for designing holographic plasmonic lenses for SPs with complex wavefronts in the visible band. We also discuss several issues of light-matter interaction in plasmonic nanostructures. We show theoretically that amplification of SPs can be achieved in metal nanoparticles incorporated with gain media, leading to a giant reduction of surface plasmon resonance linewidth and enhancement of local electric field intensity. We present an all-analytical semiclassical theory to evaluate spaser performance in a plasmonic nanocavity incorporated with gain media described by the four-level atomic model. We experimentally demonstrate amplified spontaneous emission of SP polaritons and their amplification at the interface between a silver film and a polymer film doped with dye molecules. We discuss various aspects of microscopic and macroscopic manipulation of fluorescent radiation from gold nanorod hybrid structures in a system of either a single nanoparticle or an aligned group of nanoparticles. The findings reported and reviewed here could help others explore various approaches and schemes to manipulate plasmonic wavefront and light-matter interaction in metallic nanostructures for potential applications, such as optical displays, information integration, and energy harvesting technologies.     

Enhanced Nonlinear Absorption and Optical Limiting Properties of Organic Material ZnTBP—CA—PhR in a DA—ET System

Nonlinear absorption of the organic material Zn-tetrabenzoporphin-cronicacid-phenonxy resin(ZnTBP-CA-PhR) in the donor-acceptor energy-transfer(DA-ET) system is investigated by the irradiation of Ar^ laser on its solid film.A reverse saturable absorption and an enhanced second reverse saturable absorption called the rereverse saturable absorption are observed in a visible wavelength range.The high performance of optical limiting of the sample possessing low input threshold and an over 95% linear transmission ratio are observed.The physical mechanism of rereverse satruable absorption is analysed by a five-level rate-equation simulating.According to the Huygens wave diffraction principle and the combination of Kerr effect,thermo-optic effect and optical absorption variation,a mathematical model for the optical limiting of ZnTBP-CA-PhR film limiter is established and the theoretical simulating gives a good agreement with the experimental results.     

Evolution of magnetic domain structure of martensite in Ni–Mn–Ga films under the interplay of the temperature and magnetic field

Ferromagnetic shape memory Ni-Mn-Ga films with 7M modulated structure were prepared on MgO （001） substrates by magnetron sputtering. Magnetization process with a typical two-hysteresis loop indicates the occurrence of the reversible magnetic field-induced reorientation. Magnetic domain structure and twin structure of the film were controlled by the in- terplay of the magnetic and temperature field. With cooling under an out-of-plane magnetic field, the evolution of magnetic domain structure reveals that martensitic transformation could be divided into two periods： nucleation and growth. With an in-plane magnetic field applied to a thermomagnetic-treated film, the evolution of magnetic domain structure gives evidence of a reorientation of twin variants of martensite. A microstructural model is described to define the twin structure and to produce the magnetic domain structure at the beginning of martensitic transformation; based on this model, the relationship between the twin structure and the magnetic domain structure for the treated film under an in-plane field is also described.     

Evolution of domain structure in Fe_3GeTe_2

Two-dimensional(2D)magnets provide an ideal platform to explore new physical phenomena in fundamental magnetism and to realize the miniaturization of magnetic devices.The study on its domain structure evolution with thickness is of great significance for better understanding the 2D magnetism.Here,we investigate the magnetization reversal and domain structure evolution in 2D ferromagnet Fe₃GeTe₂(FGT)with a thickness range of 11.2-112 nm.Three types of domain structures and their corresponding hysteresis loops can be obtained.The magnetic domain varies from a circular domain via a dendritic domain to a labyrinthian domain with increasing FGT thickness,which is accompanied by a transition from squared to slanted hysteresis loops with reduced coercive fields.These features can be ascribed to the total energy changes from exchange interaction-dominated to dipolar interaction-dominated with increasing FGT thickness.Our finding not only enriches the fundamental magnetism,but also paves a way towards spintronics based on 2D magnet.     

Effects of thin MnAl buffer layer on structural and magnetic properties of MnAl films

Thin Mn(2 nm)/Al(2 nm) bilayers serving as buffer layers have been prepared prior to the deposition of MnAl films. The ferromagnetic τ-phase forms in the buffer layers at an optimum substrate temperature. As a template it induces the growth of following MnAl film. Compared with the case of film without buffer layer, the growth of non-ferromagnetic phase is suppressed and the structural and magnetic properties of MnAl film are improved. Weak dipolar inter-grain coupling is revealed in the MnAl film, and the magnetic reversal process is dominated by magnetic moment rotation.     

Optical characterization of antimony-based bismuth-doped thin films with different annealing temperatures

Antimony-based bismuth-doped thin film,a new kind of super-resolution mask layer,is prepared by magnetron sputtering.The structures and optical constants of the thin films before and after annealing are examined in detail.The as-deposited film is mainly in an amorphous state.After annealing at 170-370℃,it is converted to the rhombohedral-type of structure.The extent of crystallization increased with the annealing temperature.When the thin film is annealed,its refractive index decreased in the most visible region,whereas the extinction coefficient and reflectivity are markedly increased.The results indicate that the optical parameters of the film strongly depend on its microstructure and the bonding of the atoms.     

Rigorous solution of a problem for a cylindrical cavity containing a ferrite and a dielectric

A rigorous solution is given for modes of TM_nmo type. The complex resonant frequency _n is expressed via a transcendental characteristic equation. Some particular cases are discussed.Read at the Third All-Union Conference on Ferrites, Leningrad, 23 October 1963.     

Solving a relativistic quasipotential equation for a superposition of a nonlocal separable and a local quasipotential

Within the relativistic quasipotential approach to quantum field theory, a method is developed for solving a finite-difference quasipotential equation for the case where a total quasipotential describing the interaction of two relativistic spinless particles of unequal masses is a superposition of a nonlocal separable and a local quasipotential. The cases are investigated where the local component of the total interaction—it is assumed to be known—either admits or does not admit the existence of bound states. This makes it possible to obtain an exact expression for the increment of the phase shift, to determine the conditions of the existence of bound states, and to give a generalization of the Levinson theorem.     

Tunnelling process between a semiconductor or a metal and a polymer

The tunnelling lifetime of an electron lying in a p-type orbital localised at a given distance from a semiconductor or a metal is calculated by using Bardeen's method. It is then shown that even in the absence of broad bands, the hole injection process from semiconductors and metals into polymers should follow a Fowler-Nordheim dependence, provided that the current is not bulk-limited. In the semiconductor case, the current can be expressed by a fully analytical formula, and by an approximate one in the case of a metal. It is demonstrated that the effective Fowler-Nordheim barrier is not the mere difference between the metal work function or the semiconductor electron affinity and the HOMO level of the polymer, but a simple function of both levels. Received 6 April 2001 and Received in final form 29 May 2001     

Modeling a waveguide with a nonlinear insert with a quadratic nonlinearity

The scalar problem of the scattering of a wave from a nonlinear insertion lying in the interior of a waveguide is reduced by the incomplete Galerkin method to the boundary value problem for a Hamiltonian system. The cases in which this problem admits a solution in finite terms are indicated. Examples are given to illustrate specific phenomena due to the nonlinearity of the problem.     

Surface polaritons in a dielectric at a boundary with a metal in a static electric field

The existence of surface polaritons in a dielectric at a boundary with an ideal metal or superconductor in a static electric field is predicted. The frequency regions in which polaritons exist are substantially different for opposite orientations of the electric field, so that a change in the direction of the field signifies “switching on” or “switching off” of surface polaritons with a fixed frequency. Pis'ma Zh. éksp. Teor. Fiz. 68, No. 12, 876–880 (25 December 1998)