The fundamental band ν2 of D2CO

The ν₂ band of D₂¹³CO in the region of 1570-1760 cm⁻¹ has been analyzed with high accuracy. The limits of the quantum numbers J and K_a are 50 and 16, respectively. The number of the assigned transitions is 3858. A local anharmonic resonance ν₂/2ν₄ at K_a =  8-12 was observed. The Watson’s A-reduced Hamiltonian and anharmonic resonance term were fitted to the observed transitions. The fit resulted in the band center and rotational parameters of the ν₂ band as well as the effective parameters for the 2ν₄ band and anharmonic resonance parameter. The rms deviation of the transitions in the ν₂ band was 0.000364 cm⁻¹.     

FT-FIR-spectrum and the ground state constants of D2CO

The ground state spectrum of the formaldehyde D₂¹³CO molecule in the range from 25 to 360 cm⁻¹ has been recorded by a Fourier transform infrared spectrometer. The quantum number limits of the assigned transitions are J = 6-54 and K_a = 0-16. The data was fitted into Watson’s A- and S-reduced Hamiltonians in I^r-representation up to eighth order. The determinable constants calculated from both reductions are compared. The standard deviation of the far infrared data is 3.0 MHz. The spectroscopic constants are also calculated to high accuracy at the CCSD(T)/cc-pVQZ level of ab initio theory and agree well with the experimental ones.     

Terahertz absorption spectrum of D2O vapor

The absorption spectrum of D₂O vapor from 0.2 to 2.0 THz (6.7-67 cm⁻¹) which is associated with rotational modes was measured at one atmosphere using terahertz time-domain spectroscopy (THz-TDS). The linewidth and collisional dephasing times were measured for 26 pure rotational transitions in the ground vibrational state (0 0 0). The temperature dependence of the linewidth (Δν) behaves as Δν ∼ T^−3/4 and the linewidth decrease with increasing temperature is attributed to the 1/r⁶ force of interaction between colliding D₂O molecules.     

Multispectrum analysis of the ν9 band of C2H6: Positions, intensities, self- and N2-broadened half-width coefficients

Line positions, intensities, Lorentz self- and N₂-broadened half-width coefficients have been measured for ^PQ₃, ^PQ₂, ^PQ₁, ^RQ₀, ^RQ₁, ^RQ₂, and ^RQ₃ sub-band transitions in the ν₉ fundamental band of ¹²C₂H₆. A multispectrum nonlinear least-squares fitting technique was used to fit up to 17 high-resolution (∼0.00156 cm⁻¹), room temperature absorption spectra of pure (99.99% chemical purity) natural sample of ethane and lean mixtures of the high-purity ethane diluted with N₂. A Bruker IFS 120HR Fourier transform spectrometer located at the Pacific Northwest National Laboratory (PNNL), in Richland, Washington was used to record the data. A standard Voigt line shape was assumed to fit all the data since no line mixing or other non Voigt line shapes were required to fit any of the spectra used in the analysis. Short spectral intervals (∼2-2.5 cm⁻¹) of all 17 spectra covering a specific ^PQ or ^RQ sub-band were fit simultaneously. For the first time in an ethane band, pressure-broadened half-width coefficients were determined for the torsional-split components. However, for better reliability of the retrieved coefficients for the weaker components (transitions with large intensity ratios of 4:1 or 3:1 for most K levels between the strong and weak components), constraints were used such that the half-width coefficients of both torsional-split components for a given J were identical for a specific broadening gas. No pressure-induced shift coefficients were necessary to fit the spectra to their noise level. The present study revealed for the first time the dependence of self- and N₂-broadened half-width coefficients upon the J, K quantum numbers of the transitions in ethane. A number of transitions belonging to the ν₉+ν₄−ν₄ and the ν₉+2ν₄−2ν₄ hot bands were also observed in the fitted regions and measurements were made when possible.     

Sub-Doppler laser absorption spectroscopy of the AΠi − XΣ (1, 0) band of CN: Measurement of the N hyperfine parameters in AΠ CN

Measurements of multiple rotational lines in the (1, 0) band of the A²Π_i − X²Σ⁺ “red” system of the cyanogen radical (CN) at sub-Doppler resolution are reported. The CN radical was produced by 193 nm photodissociation of NCCN (ethane dinitrile) and detected with a Ti:sapphire ring laser operating near 10 900 cm⁻¹. The sample was exposed to a weak, frequency-modulated probe beam and a strong, counterpropagating bleach laser beam. Demodulated probe laser signals display absorption and dispersion features derived from Doppler-free saturation of the hyperfine components as the laser scans across the central region of a Doppler-broadened rotational line spectrum. Hyperfine-resolved transition frequencies were combined with known ground-state X²Σ hyperfine term values to determine A²Π state hyperfine term values, which were analyzed in terms of an effective Hamiltonian for the A²Π state. All the expected hyperfine and ¹⁴N quadrupolar parameters were determined and their values analyzed in terms of a simple molecular orbital picture of the bonding in the radical. Higher sensitivity obtained with 400 kHz amplitude modulation of the bleach laser and additional phase-sensitive detection allowed hyperfine splittings in some rotational lines of ¹³C¹⁴N to be observed in natural abundance. Excited state hyperfine splittings were determined for a selection of rotational states, but not enough to determine the ¹³C hyperfine parameters.     

Ritz assignment and Watson fits of the high-resolution ring-puckering spectrum of oxetane

Oxetane is a four-membered ring molecule exhibiting a large-amplitude ring-puckering motion. In order to analyze this vibration we recorded a rotationally resolved far-infrared spectrum between 50 and 145 cm⁻¹. The analysis of the ring-puckering fundamental band with the assignment of 1108 lines, has been presented in a previous paper. In the present work we present a list of further 6531 assigned transitions between the five lowest excited ring-puckering states. The 4983 term values involved in the transitions assigned in this and in the preceding work have been evaluated by the “Ritz” program, and are now available. An A-reduced Watson Hamiltonian in any of the three representations I^r, II^r, and III^r was used to perform a fit of the assigned transitions. Precise rotational constants and quartic as well as a full set of sextic centrifugal distortion constants were obtained for the investigated ring-puckering states. For the first time, high-resolution values for the vibrational G_v parameters have been obtained, and we have added terms in x⁶ and x⁸ to the double minimum-potential well describing the ring-puckering motion, in order to reproduce their values within the experimental accuracy. The same potential still reproduces the lower resolution values of the Q-branch origins involving higher ring-puckering states up to v_rp=14 found in the previous literature.     

High resolution study of AsHD2: Ground state and the three bending fundamental bands ν3, ν4, and ν6

For the first time the infrared spectrum of the AsHD₂ molecule has been measured in the region of the bending fundamental bands ν₃, ν₄, and ν₆ on a Fourier transform spectrometer with a resolution of 0.0024 cm⁻¹ and analyzed. More than 5500 transitions with J^max = 26 have been assigned and used both to obtain “ground state combination differences” and for the determination of upper state ro-vibrational energies of the triad (001000), (000100), and (000001). Rotational parameters including centrifugal distortion coefficients up to octic terms of the ground vibrational state were calculated by fitting more than 500 “ground state combination differences” with J^max and . The obtained set of 24 parameters provides a rms-deviation of 0.00011 cm⁻¹. The upper energies were fitted with 52 parameters of an effective Hamiltonian which takes into account strong resonance interactions between all vibrational states of the triad (001000), (000100), and (000001). The rms-deviation for the energy levels considered in the fit is 0.00014 cm⁻¹.     

Interactions between vibrational polyads of propyne, H3CCCH: Rotational and rovibrational spectroscopy of the levels around 1000 cm

The study of vibration resonance physics in propyne is based on experimental measurements of about 600 new rotational transitions between 495-590 and 700-760 GHz in excited vibrational levels v₅ = 1, v₈ = 1, v₁₀ = 3 and v₉ = v₁₀ = 1 with vibrational energies around 1000 cm⁻¹. The limits to the assignments and analysis were imposed by as yet unresolved anharmonic resonances with the states of the next higher polyad of levels lying above 1200 cm⁻¹, which affect the rotational states involved in transitions that would be measurable with non-vanishing intensities. Vibration-rotation spectra pertaining to the levels in question were studied in the regions 880-1150 cm⁻¹ (the ν₅ and ν₈ fundamental bands), 550-750 cm⁻¹ (the v₉ = v₁₀ = 1 ← v₁₀ = 1 hot bands) and 250-400 cm⁻¹ (the v₁₀ = 3 ← v₁₀ = 2 “superhot” bands). A simultaneous least-squares fit of both types of data provides their reliable but in the case of accurate rotational data not always fully quantitative reproduction.     

The ground and first excited torsional states of methyl carbamate

A global fit within experimental accuracy of microwave and millimeter-wave transitions in the ground and first excited torsional states of methyl carbamate (H₂NC(O)OCH₃) is presented. The data set consisting of 995 v_t = 0 and 731 v_t = 1 transition frequencies combines 1544 new measurements from Kharkov with previously published v_t = 0 microwave lines. In this study the so-called “rho axis method” that treats simultaneously both A and E species of the ground and first excited torsional states is applied to the methyl carbamate data set for the first time. The final fit requires only 32 parameters to achieve a unitless weighted standard deviation for the whole fit of 0.89 for a total of 1726 transitions with rotational quantum numbers up to J ? 20 and K_a ? 10. The barrier to internal rotation of the methyl group obtained in this study, V₃ = 359.141(24) cm⁻¹, is in good agreement with previously published values but more accurate.     

CO2-broadening coefficients in the ν4 + ν5 band of acetylene

The CO₂-broadening coefficients of 24 P- and R-branch transitions in the ν₄ + ν₅ band of acetylene were measured at room temperature using a diode-laser spectrometer. These lines with J values up to 26, were located in the spectral range 1270 to 1400 cm⁻¹. The collisional broadening coefficients were retrieved by fitting the experimental profiles to the Voigt, Rautian, and Galatry lineshape models. Two experimental values for the narrowing coefficient were determined from the spectra and compared with the theoretical narrowing coefficient. The calculations of these broadenings were also performed in the frame of a semiclassical formalism involving a simple intermolecular potential with an adjustable parameter. The theoretical results are in good agreement with the experimental results and reproduce well the J dependence of the broadening coefficients.     

Torsion-rotation global analysis and database for the CH3OH isotopomer of methanol

Fourier-transform far-infrared spectra of CH₃¹⁸OH in the 15-470 cm⁻¹ region have been analyzed by means of the Ritz assignment program. The far-infrared data have been combined with the literature microwave and millimeter-wave measurements in a full global fitting of the first three torsional states (ν_t = 0, 1, and 2) of the CH₃¹⁸OH ground vibrational state. The fitted dataset includes 550 microwave and millimeter-wave lines and more than 17 000 Fourier-transform transitions covering the quantum number ranges J ? 30, K ? 15, and ν_t ? 2. With incorporation of 79 adjustable parameters, the global fit achieved convergence with an overall weighted standard deviation of 1.072, essentially to within the assigned measurement uncertainties of ±50 kHz for almost all of the microwave and millimeter-wave lines and ±6 MHz (0.0002 cm⁻¹) to ±15 MHz (0.0005 cm⁻¹) for the Fourier-transform far-infrared measurements. Based on the global fit results, a database has been compiled containing transition frequencies, quantum numbers, lower state energies and transition strengths. This database will provide support for present and future astronomical studies, such as the on-going Orion surveys in preparation for the launch of the Herschel Space Observatory, in identifying isotopic methanol contributions to interstellar spectra.     

Accurate rotational spectroscopy of sulfur dioxide, SO2, in its ground vibrational and first excited bending states, v2 = 0, 1, up to 2 THz

Approximately 150 pure rotational transitions each have been recorded for SO₂, v₂ = 0 and 1, in selected frequency regions up to 2 THz. The J and K_a quantum numbers reach very high values: 92 and 23, respectively, for the ground vibrational state and 81 and 21, respectively, for the first excited bending state. The highest levels accessed are almost 3000 cm⁻¹ above ground. The relative experimental uncertainties Δν/ν are about 10⁻⁸ for several medium to strong, isolated lines, and generally better than 2.5 × 10⁻⁷. Improved spectroscopic parameters have been obtained for both states, particularly for the excited bending state. In fact, the accuracies with which the energy levels of the v₂ = 1 state are known depend essentially only on the accuracy with which the vibrational spacing is known from infrared spectroscopy.     

Multispectrum analysis of the ν4 band of CH3CN: Positions, intensities, self- and N2-broadening, and pressure-induced shifts

A multispectrum nonlinear least-squares fitting technique was applied to measure accurate zero-pressure line center positions, Lorentz self- and nitrogen (N₂)-broadened half-width coefficients, and self- and N₂-pressure-induced shift coefficients for over 700 transitions in the parallel ν₄ band of CH₃CN near 920 cm⁻¹. Fifteen high-resolution (0.0016 cm⁻¹) laboratory absorption spectra of pure and N₂-broadened CH₃CN recorded at room temperature using the Bruker IFS 125HR Fourier transform spectrometer located at the Pacific Northwest National Laboratory (PNNL) in Richland, Washington, USA, were analyzed simultaneously assuming standard Voigt line shapes. Short spectral intervals containing manifolds of transitions from the same value of J were fitted together. In all, high-precision line parameters were obtained for P(44)-P(3) and R(0)-R(46) manifolds. As part of the analysis, quantum assignments were extended, and the total internal partition function sum was calculated for four isotopologs: ¹²CH₃¹²CN, ¹³CH₃¹²CN, ¹²CH₃¹³CN, and ¹³CH₃¹³CN. Measurements of N₂ broadening, self-broadening, N₂-shift, and self-shift coefficients for transitions with J up to 48 and K up to 12 were measured for the first time in the mid-infrared. Self-broadened half-width coefficients were found to be very large (up to ∼2 cm⁻¹ atm⁻¹ at 296 K). Ratios of self-broadened half-width coefficients to N₂-broadened half-width coefficients show a compact distribution with rotational quantum number in both the P and R branches that range from ∼4.5 to 14 with maxima near ∣m∣=24, where m=−J″, J″, and J″+1 for P, Q, and R lines, respectively. Pressure-induced shifts for N₂ are small (few exceed ±0.006 cm⁻¹ atm⁻¹ at 294 K) and are both positive and negative. In contrast, self-shift coefficients are large (maxima of about ±0.08 cm⁻¹ atm⁻¹ at 294 K) and are both positive and negative as a function of rotational quantum numbers. The present measured half-widths and pressure shifts in ν₄ were compared with corresponding measurements of rotational transitions.     

High resolution analysis of the ν12 and ν17 fundamental bands of acrolein, CH2CHCHO, in the 600 cm region

Synchrotron radiation from the new Canadian Light Source facility has been used to obtain a high resolution (0.0012 cm⁻¹) absorption spectrum of acrolein vapor in the 550-660 cm⁻¹ region. Almost 2000 transitions have been included in a detailed analysis of the ν₁₂ (∼564 cm⁻¹) and ν₁₇ (∼593 cm⁻¹) fundamental bands which yielded precise values for the band origins, rotational and centrifugal distortion parameters. The analysis included the a- and b-type Coriolis interactions connecting ν₁₂ and ν₁₇, as well as an a-type Coriolis interaction between ν₁₇ and a “dark” perturbing state, identified as 4ν₁₈. We believe that this is the first high resolution infrared study of acrolein.     

Photoluminescence scanning on InAs/InGaAs quantum dot structures

The photoluminescence spectra of InAs quantum dots (QDs) embedded into four types of In_xGa_1−xAs/GaAs (x = 0.10, 0.15, 0.20 and 0.25) multi quantum well MBE structures have been investigated at 300 K in dependence on the QD position on the wafer. PL mapping was performed with 325 nm HeCd laser (35 mW) focused down to 200 μm (110 W/cm²) as the excitation source. The structures with x = 0.15 In/Ga composition in the In_xGa_1−xAs capping layer exhibited the maximum photoluminescence intensity. Strong inhomogeneity of the PL intensity is observed by mapping samples with the In/Ga composition of x ≥ 0.20-0.25. The reduction of the PL intensity is accompanied by a gradual “blue” shift of the luminescence maximum at 300 K as follows from the quantum dot PL mapping. The mechanism of this effect has been analyzed. PL peak shifts versus capping layer composition are discussed as well.     

High resolution fourier transform spectrum of PD3 in the region of the stretching overtone bands 2ν1 and ν1+ν3

The infrared spectrum of the PD₃ molecule has been measured in the region of the first stretching overtone bands on a Fourier transform spectrometer with a resolution of 0.0068 cm⁻¹ and analyzed for the first time. More than 800 transitions with J^max=15 have been assigned to the bands 2ν₁ and ν₁+ν₃. An effective Hamiltonian was used which takes into account both the presence of resonance interactions between the states (2 0 0 0) and (1 0 1 0), and interactions of these with the third stretching vibrational state of the v=2 polyad, (0 0 2 0). A set of 44 spectroscopic parameters is obtained from the fit. This reproduces the 305 initial “experimental” upper rovibrational energies with an rms=0.0015 cm⁻¹.     

First principles study of structural, electronic and vibrational properties of heavily boron-doped diamond

The structural, electronic and vibrational properties of a series of heavily B-doped diamond models have been investigated using the density functional theory within a local density approximation. The doped models C_64 − nB_n (n=1-3) were constructed using supercell techniques. The structural and electronic calculations confirmed that the B dimers are always energetically stable and electrical inactive. The superconducting transition temperature TC is not only decided by the B concentration, but also by the lattice configurations of boron atoms. The vibrational frequencies and eigenmodes were determined using the linear response approach, while Raman intensities were obtained by the second response method. The Raman analysis in terms of atomic vibrations found that the “500 cm⁻¹” and “1230 cm⁻¹” bands are both superposed bands including not only C vibrations but also B-B vibrations and B-C vibrations, respectively. The calculated Raman spectra with isotopic substitutions are in excellent agreement with corresponding experimental results. The reasonable explanation was provided for no obvious Raman shift of main bands from ¹⁰B¹²C to ¹¹B¹²C model.     

Preparation and characterization of CdS/Si coaxial nanowires

CdS/Si coaxial nanowires were fabricated via a simple one-step thermal evaporation of CdS powder in mass scale. Their crystallinities, general morphologies and detailed microstructures were characterized by using X-ray diffraction, scanning electron microscope, transmission electron microscope and Raman spectra. The CdS core crystallizes in a hexagonal wurtzite structure with lattice constants of a=0.4140 nm and c=0.6719 nm, and the Si shell is amorphous. Five Raman peaks from the CdS core were observed. They are 1LO at 305 cm⁻¹, 2LO at 601 cm⁻¹, A₁-TO at 212 cm⁻¹, E₁-TO at 234 cm⁻¹, and E₂ at 252 cm⁻¹. Photoluminescence measurements show that the nanowires have two emission bands around 510 and 590 nm, which originate from the intrinsic transitions of CdS cores and the amorphous Si shells, respectively.     

InSb quantum dots and quantum rings on InAs-rich surface

We report a study of InSb nanoobjects (quantum dots and quantum rings) grown on InAs-rich surface by liquid phase epitaxy. Characterization of the sample surface was performed using atomic force microscopy (AFM). The bimodal formation of the uncapped InSb quantum dots (QDs) was observed for the growing on a binary InAs substrate. Uniform high-density (1 × 10¹⁰ cm⁻²) quantum dots with a height of 3 nm were obtained at T = 420-430 °C, whereas low-density (5 × 10⁸ cm⁻²) big quantum dots were 9 nm in height. As a buffer layer, lattice-matched InAsSb_0.12P_0.25 solid solution was deposed on InAs substrate using metal-organic vapour phase epitaxy. Deposition from the InSb melt on the buffer layer resulted in the formation of InSb nanoobjects with density as high as 3 × 10¹⁰ cm⁻².     

New observation and analysis of the E(4)Σ state in NaLi

Polarization labeling spectroscopy is applied to study the excited E(4)¹Σ⁺ state of NaLi in the energy range 25 850-27 750 cm⁻¹ above the bottom of the ground state. The potential curve of the E state is constructed using the Inverted Perturbation Approach method.