Spectral and nonlinear studies of night blue dye

Solid-state dye-doped polymer is an attractive alternative to the conventional liquid dye solution. In this Letter the spectral characteristics and the nonlinear optical properties of the dye night blue are studied. The spectral characteristics of night blue dye doped poly(methylmethacrylate) modified with additive n-butyl acetate (nBA) are studied by recording its absorption and fluorescence spectra and the results are compared with the corresponding liquid mixture. The nonlinear refractive index of the dye in nBA and dye doped polymer film were measured using z-scan technique [S.-B., Mansoor, A.A. Said, T.-H. Wei, D.J. Hagan, E.W. Van Stryland, IEEE J. Quantum Electron. 26 (1990) 760], by exciting with He–Ne laser. The results obtained are intercompared. Both the samples of dye night blue show a negative nonlinear refractive index. The origin of optical nonlinearity in the dye may be attributed due to laser-heating induced nonlinear effect.     

双包层掺染料聚合物光纤放大器的增益性能分析

双包层聚合物光纤放大器可以减小染料的热漂白,使用速率方程的方法,给出了一个能够全面描述双包层掺染料聚合物光纤放大器增益性能的模型,模型既考虑了染料三重态能级对速率方程的影响,又考虑了双包层结构对泵浦光的影响,可以在稳态的情况下计算放大器的各种增益性能指标.     

Spectral characteristics and nonlinear studies of methyl violet 2B dye in liquid and solid media

Solid-state dye-doped polymers are attractive alternatives to the conventional liquid-dye solutions. In this paper, the spectral characteristics and nonlinear properties of the dye Methyl violet 2B has been studied. The third-order nonlinear optical properties of Methyl violet 2B dye in ethanol and a dye-doped polymer film were measured by the Z-scan technique. This material exhibits a negative optical nonlinearity. The dye exhibited a nonlinear refractive coefficient (n ₂ = ?4.14 × 10^?7 and ?4.291 × 10^?7 cm²/W in liquid and solid media, respectively), nonlinear absorption coefficient (β = ?4.634 × 10^?3 and ?4.66 × 10^?3 cm/W in liquid and solid media, respectively), and susceptibility (χ⁽³⁾ = 1.88 × 10^?5 and 1.963 × 10^?5 esu in liquid and solid media, respectively). These results show that Methyl violet 2B dye has potential applications in nonlinear optics.     

Spectral and nonlinear studies of an aniline blue dye in liquid and solid media

Solid-state dye-doped polymers are an attractive alternative to conventional liquid dye solutions. In this paper, the spectral characteristics and nonlinear properties of the Aniline Blue dye has been studied. The third-order nonlinear optical properties of the Aniline Blue dye in ethanol and a dye-doped polymer film were measured by the Z-scan technique using a 632.8-nm He-Ne laser. This material exhibits a negative optical non-linearity. The dye at a 0.4-mM concentration exhibited a nonlinear refractive coefficient (n ₂ = ?4.02 × 10^?8 and ?4.41 × 10^?8 cm²/W in liquid and solid media, respectively), a nonlinear absorption coefficient (β = ?9.7 × 10^?4 and ?11.63 × 10^?4 cm/W in liquid and solid media, respectively), and susceptibility (x ⁽³⁾ = 1.844 × 10^?6 and 2.028 × 10^?6 esu in liquid and solid media, respectively). These results show that the Aniline Blue dye has potential applications in nonlinear optics.     

Holographic grating formation in dye doped polymer dispersed liquid crystals

We report a detailed investigation on holographic grating formation in dye-doped polymer dispersed liquid crystals. Both optical and scanning electron microscope measurements have been carried out. All the experimental data support the idea that a photorefractive-like effect is the basic mechanism of the optical storage effect, while it is demonstrated that neither droplets' size or shape effects, nor dye or polymer reorientation are involved in the process.     

Enhanced optical nonlinearities in some dye-doped nematic liquid crystals

The nonlinear refractive index of some pure and dye-doped nematic liquid crystals was measured and compared using extraordinary polarized light. The optical torque of the nematic liquid crystals was strongly enhanced by a small amount of dye impurities (Sudan Black B). This observation is found to be in good agreement with the Janossy model. The dependence of the enhancement factor on the nematic host structure was investigated. The sign of all nonlinear refractive indices were determined by the Z-scan technique.     

Dependence of lasing threshold power on excitation wavelength in dye-doped cholesteric liquid crystals

Relationship between threshold power and excitation wavelength has been investigated in distributed feedback (DFB) lasers using dye-doped cholesteric liquid crystals (CLCs). We found that the threshold shows strong dependence on the excitation wavelength. The excitation wavelength was varied over the whole absorption band of a commercial DCM dye, resulting in almost one-order of magnitude lower threshold power by the excitation at the higher energy tail than at the lower energy tail of the absorption band. We confirmed the existence of an optimum wavelength giving the lowest threshold power due to the competition between this effect and decreasing absorption at the higer-energy tail of the absorption band using a different dye, pyromethene 580.     

Change in optical path length of saturable absorbing dye-doped polymer films under laser irradiation

The cause of the change in the optical path lengthΔ(nd) of the saturable absorbing dye-doped polymer films under laser irradiation is investigated using polyvinyl alcohol and gelatin films doped with erythrosin B. The temperature rise of the dye-doped films, the changes in optical path length, film thickness, the refractive index and the optical density of the dye-doped films are measured under laser irradiation. The thermal expansion due to the temperature rise of the dye-doped films caused by the irradiation has greater effect on theΔ(nd) than the fading of dye molecules due to the irradiation of laser beams.     

Third-order optical nonlinearities and optical-limiting properties of a Pararosanilin dye in liquid and solid media

Solid-state dye-doped polymers are attractive alternatives to the conventional liquid-dye solutions. In this paper, the third-order nonlinear optical properties of a Pararosanilin dye in 1-Butanol and a dye-doped polymer film were measured by the Z-scan technique using a continuous wave 532-nm diode-pumped Nd:Yag laser. This material exhibits a negative optical nonlinearity. The low-power optical-limiting properties based on the nonlinear refraction of this material have also been studied.     

Random lasing in dye-doped polymer dispersed liquid crystal film

A dye-doped polymer-dispersed liquid crystal film was designed and fabricated,and random lasing action was studied.A mixture of laser dye,nematic liquid crystal,chiral dopant,and PVA was used to prepare the dye-doped polymer-dispersed liquid crystal film by means of microcapsules.Scanning electron microscopy analysis showed that most liquid crystal droplets in the polymer matrix ranged from 30 μm to 40 μm,the size of the liquid crystal droplets was small.Under frequency doubled 532 nm Nd:YAG laser-pumped optical excitation,a plurality of discrete and sharp random laser radiation peaks could be measured in the range of 575–590 nm.The line-width of the lasing peak was 0.2 nm and the threshold of the random lasing was 9 m J.Under heating,the emission peaks of random lasing disappeared.By detecting the emission light spot energy distribution,the mechanism of radiation was found to be random lasing.The random lasing radiation mechanism was then analyzed and discussed.Experimental results indicated that the size of the liquid crystal droplets is the decisive factor that influences the lasing mechanism.The surface anchor role can be ignored when the size of the liquid crystal droplets in the polymer matrix is small,which is beneficial to form multiple scattering.The transmission path of photons is similar to that in a ring cavity,providing feedback to obtain random lasing output.     

Effect of different donors and a polymer environment on photophysical and energy transfer studies using C540 as the acceptor

The dyes (C450, C480 and C540) and their dye mixtures (C450:C540 and C480:C540) were doped in polymer matrices (solid). Their photophysical studies were recorded. These results were analysed by comparing them with the data of the dyes and the dye mixtures in monomer compositions (liquid). The absorption and fluorescence spectral profiles of the dyes in the polymer matrix were found to be identical to those in the monomer compositions. The effect of different donors on the energy transfer technique using C540 as acceptor, in polymer matrix and monomer compositions, was studied in detail. The results obtained for the energy transfer technique in two binary dye mixtures containing different donors but same acceptor, in solid and liquid media, were intercompared. The gain of the acceptor without donor and with different donors was determined experimentally. The gain coefficient in the polymer matrix (solid) was less than that in the monomer medium (liquid). Also, the gain of the acceptor C540 was found to be more when C450 was used as the donor compared to that when C480 was used as the donor. Using nitrogen laser, the photobleaching effect in the two binary dye-doped polymer rods (with different donors but same acceptor) was studied. It was observed that photobleaching of the acceptor C540 in the presence of C450 as donor is slower than that in the presence of C480 as donor.     

Changes in material parameters for dye-doped ferroelectric liquid crystal

Addition of the dichroic anthraquinone dye molecules in pure ferroelectric liquid crystal (FLC) matrix results in many improvement in the various vital parameters of the pure FLC. However, addition of anthraquinone dye molecules in pure FLC matrix is not advantageous every time. There are certain constraints which are crucial for the application of these systems into many devices. In this article, we have discussed the concentration and temperature dependence of vital properties of dye-doped FLC. In this study there is improvement in contrast ratio by dye doping due to enhancement in plane switching for dye-doped FLC.     

Synthesis and optical properties of basic fuchsin dye-doped PMMA polymeric films for laser applications: wide scale absorption band

Basic fuchsin dye-doped poly(methyl methacrylate) polymeric films were sensitized with various dye concentrations ranging from 0.0833 to 1.667 wt% of basic fuchsin. Their structure, linear absorption, and optical limiting properties were examined. The films were prepared using a simple and fast casting technique dissolved in chloroform for both the dye and the polymer. Structural characterizations were achieved by XRD, and the films showed an amorphous hump supporting the noncrystalline structure of studied polymeric composites. Spectrophotometer measurements were used to estimate the spectral absorption measurements of the films such as transmittance, absorbance with the calculations of absorption index (k), and optical energy band gap (E _g ) in the wavelength region from 190 to 2500 nm. Results show that the optical constants change with increasing the dye doping concentrations. It has been found that optical energy gap (E _g ) appearing that, both direct and indirect optical transitions are conceivable for these films. Optical limiting properties of the films with various dye concentrations were studied using a continuous wave He–Ne laser operating at 632.8 nm. The results appeared that the sample has an obvious optical limiting effect. The designed BF/PMMA composites can be applicable in wide-scale applications.     

The nonlinear refraction sign turned to reverse by intercalating cresyl violent dye into layered titanate nanosheets

Solid-state dye-doped materials are an attractive alternative to conventional liquid dye solution. In this study, the spectral characteristics of dye cresyl violet before and after intercalating into layered titanate nanosheets and forming a nanohybrid thin film were investigated by measuring absorption and fluorescence spectra. In addition, their nonlinear optical properties were studied using single beam z-scan technique under irradiation of low power continuous wave (CW) produced by DPSS laser with a wavelength of 532 nm. The nonlinear studying results reveal that the dye cresyl violet in solution has a negative nonlinear refractive index, but it reverses to positive after the dye is intercalated into layered titanate nanosheets with a negative nonlinear refractive index forming CV/HTO nanohybrid thin film. This method can provide a way to turn to reverse nonlinear refraction sign of the materials.     

Dye-concentration-dependent lasing behaviors and spectral characteristics of cholesteric liquid crystals

The laser behavior and spectral changes occurring in cholesteric liquid crystals with varying dye-doped concentrations were investigated when pumped at 532 nm. It was found that the long-wavelength band edge and the laser line exhibit a blue shift over 21 nm with increasing dye concentration. The circularly polarized fluorescence spectra were examined, and the location of the sense reversion of circular polarization was determined to coincide well with the discrete lasing lines. The blue shift can be ascribed to the decrease in average refractive index and pitch of the dye-doped cholesteric liquid crystals. The dependence of the slope efficiency and threshold energy on the dye concentration can be attributed to the shift in photonic stopband and the change in penetration depth of excitation. The temperature and incident angle of pumping beam also have a significant impact on the lasing properties. The optimal dye concentration is found to be 0.5 wt% at 30.5 °C with an incident angle of 10°. The laser emission located at 601.4 nm with slope efficiency of 4 % was achieved above the threshold energy of 14.3 μJ.     

Early dynamics of guest-host interaction in dye-doped liquid crystalline materials

We have studied in detail the early dynamics of laser-induced molecular reorientation in a dye-doped liquid crystalline (LC) medium that exhibits a significant enhancement of the optical Kerr nonlinearity due to guest-host interaction. Experimental results agree quantitatively with theory based on a model in which the anisotropic dye excitation helps reorient the LC molecules through a mean-field intermolecular interaction.     

Lasing features of dye—doped pendant drops added with polymer particles：spectral blueshift and intensity enhancement

When micrometre-sized polymer particles were added into a dye-doped pendant drop that acted as a quasi-two-dimensional circular resonator,we found a blueshift of the peak wavelength of its lasing spectrum.The lasing output was also enhanced by the particles.The spectral blueshift was explained by a model of dye lasing in a circular cavity.The model includes losses of the scattering particles,medium absorption,and radiation leakage,An optimum particle density for maximum lasing output was deduced.The results are consistent with our experimental findings.     

Random lasing from dye-doped negative liquid crystals using ZnO nanoparticles as tunable scatters

This work demonstrates the realization of a lasing in scattering media,which contains dispersive solution of Zn O nanoparticles(NPs) and laser dye 4-dicyanomethylene-2-methyle-6-(p-dimethylaminostyryl)-4H-pyran(DCM) in negative liquid crystals(LCs) that was injected into a cell.The lasing intensity of the dye-doped negative LC laser can be tuned from low to high if the NPs concentration is increased.The tunability of the laser is attributable to the clusters-sensitive feature in effective refractive index of the negative LCs.Such a tunable negative liquid crystal laser can be used in the fabrication of new optical sources,optical communication,and liquid crystal laser displays.     

Single-beam Z-scan measurement of the third-order optical nonlinearities of triarylmethane dyes

Solid-state dye-doped polymers are an attractive alternative to the conventional liquid-dye solutions. The search for new materials which have potential application in optoelectronic devices has lead us to probe the organic dyes. The solid state being a better medium when compared to a liquid medium has lead to the incorporation of dyes in the polymer matrix. The study of nonlinear characteristics of dyes in polymeric media is essential for developing such potential application devices. In this paper, the third-order nonlinear optical properties of three dyes from the Triarylmethane family were measured in 1-Butanol and in dye-doped polymer films by the Z-scan technique using a cw diode-pumped Nd:YAG laser at 532 nm. The Z-scan technique has also been used to present the observation of a nonlinear refractive index resulting from the photochromism of one of the dyes. These materials exhibit a large negative optical nonlinearity resulting due to the thermal effect. The relative contributions from the nonlinear absorption (NLA) and nonlinear refraction (NLR) are dependent on the chemical structure and linear absorption of the dyes. The dyes exhibited a nonlinear refractive coefficient n ₂, a nonlinear absorption coefficient β, and susceptibility x⁽³⁾ on the order of 10^?8 cm²/W, 10^?4 cm/W, and 10^?6 esu, respectively, in both liquid and solid media. The results show that these dyes have potential applications in nonlinear optics.     

Measurement of the internal lasing intensity distribution of a dye-doped pendant drop

The lasing intensity distribution made inside a circular resonator formed by a dye-doped pendant drop was measured by addition of polymer particles to the dye solution to enhance the elastic-scattered light of the lasing inside the pendant drop. A theory that connects wave and ray pictures in dealing with the cavity resonance is used to calculate the internal intensity distribution. The experimental and theoretical results are in good agreement for sufficiently large densities of scattering particles, such that the cavity mode efficiency phi is approximately 1 for all resonant modes.