Si在TiAl3中取代行为的第一性原理研究

采用基于密度泛函理论的第一性原理方法，研究了Si原子在TiAl₃中的格点取代行为.通过对不同原子被置换后的c/a值、形成能以及电子态密度的计算和比较，发现Si原子倾向于取代TiAl₃中的Al原子，其取代行为主要由系统的电子结构决定，计算结果与实验相符.为了进一步研究Si原子的取代行为，对Si原子占据的格点以松散或紧凑分布下体系的总能、形成能以及电子态密度进行了计算，结果表明Si原子倾向于取代TiAl₃中松散分布的Al（2）原子.对c/a值的计算表明，随Al（2）格点Si原子浓度的增加，c/a值逐渐增大；而当Si取代Al（1）格点时，c/a值随Si原子浓度的增加而减小.研究表明，Si在TiAl₃中的极限固溶度介于12.5at%—18.75at%之间. 关键词： 密度泛函理论 第一性原理 电子结构 3')" href="#">TiAl₃     

Si在TiAl3中取代行为的第一性原理研究

采用基于密度泛函理论的第一性原理方法,研究了Si原子在TiAl3中的格点取代行为.通过对不同原子被置换后的c/a值、形成能以及电子态密度的计算和比较,发现Si原子倾向于取代TiAl3中的Al原子,其取代行为主要由系统的电子结构决定,计算结果与实验相符.为了进一步研究Si原子的取代行为,对Si原子占据的格点以松散或紧凑分布下体系的总能、形成能以及电子态密度进行了计算,结果表明Si原子倾向于取代TiAl3中松散分布的Al(2)原子.对c/a值的计算表明,随Al(2)格点Si原子浓度的增加,c/a值逐渐增大;而当Si取代Al(1)格点时,c/a值随Si原子浓度的增加而减小.研究表明,Si在TiAl3中的极限固溶度介于12.5at%-18.75at%之间.     

(Fe1-xNix)2P电子结构与磁学特性的X射线近边吸收谱研究

利用X射线近边吸收谱对Fe₂P，Ni₂P及其掺杂物(Fe_1-xNi_x)₂P(x=01,025,05)中Fe，Ni，P的K边进行了研究.结合多重散射理论近边计算，讨论了金属原子不同位置格点3f，3g对近边谱特征的贡献，得出当Ni原子取代Fe原子时将优先占据Fe(3f)格点位置；根据第一性原理对能态的计算发现，不考虑磁性时不同格点P的pDOS未占据态电子结构与P-K近边吸收谱实验相符合；与考虑铁磁性Fe₂P 的DOS相比较后结果显示Fe₂P的磁性主要来源于Fe(3g)格点，铁磁性Ni₂P计算的Ni不同格点原子磁矩均接近于0，与它一般显顺磁性结论相一致. 关键词： X射线近边吸收谱 电子结构 多重散射理论 态密度     

合金化元素Ru和Re在Ni3Al中的相互作用及其对力学性质的影响

采用基于密度泛函理论和广义梯度近似的第一原理方法,探究了Ru元素和Re元素在Ni₃Al中的相互作用及其对力学性质的影响.计算表明：在绝大多数化学计量比范围内,Ru原子优先占据Ni₃Al中的Ni位,Re原子优先占据Ni₃Al中的Al位,Ru和Re易于聚集分布,占据近邻的Ni-Al原子对.通过差分电荷密度图和态密度图分析得到Ru和Re掺杂会与近邻Ni原子产生轨道相互作用,Ru和Re之间也会产生轨道相互作用.通过计算弹性模量,应用经验判据得到Ru的加入使得Ni₃Al材料抗压缩能力和韧性明显增强,但硬度有所降低.而Ru、Re的同时加入使其抗压缩能力、韧性和硬度都有所增强.     

铬和镍的添加对Fe3Al合金力学性能影响的DFT研究

利用第一原理研究了过渡金属元素 Cr 或 Ni 在 Fe₃Al合金中的优先占位行为及其合金化效应. 计算结果表明: Cr 或 Ni 的取代有助于Fe₃Al 合金体系更稳定, Cr 优先占据 Fe_I 位, Ni 优先占据 Fe_II位. Fe₂NiAl-II 具有最小的剪切模量G, 杨氏模量E和G/B值, 因此Fe₂NiAl-II合金的韧性、延展性最佳. 态密度和电荷密度图表明, 过渡金属元素的取代提高了它们与近邻基体原子之间的相互作用, 削弱了Al和Fe的相互作用.     

嵌入原子法研究Ni3Al中点缺陷以及Re择优占位和集团化

基于纯金属元素Ni，Al和Re的基本物理性质，建立了一个Ni-Al-Re三元体系的分析型嵌入原子多体势.结合分子动力学计算了Ni₃Al的平衡晶格常数、弹性模量、结合能、空位形成能以及反位置缺陷形成能，并分析了Ni₃Al中点缺陷的存在形式.计算结果表明，当成分偏离理想化学配比时出现反位置缺陷.同时研究了Re在Ni₃Al中的择优占位以及Re在Ni₃Al和Ni中的集团化行为.计算结果表明，Re在Ni₃Al中优先置换Al的位置，且发现当Re原子团的尺寸接近于11?时，Re原子团的长大趋势变弱.计算结果与实验以及其他的理论计算结果相符合. 关键词： 嵌入原子势 3Al')" href="#">Ni₃Al Re 占位 集团化     

γ-TiAl中Nb和Mo合金化效应的第一性原理研究

基于密度泛函理论框架下的第一性原理离散变分(DV)和DMol方法研究了4d过渡金属元素在γ-TiAl 中的择优占位行为及其Nb和Mo的合金化效应.转移能的计算结果表明Y，Zr，Nb，Mo在γ-TiAl中有Ti占位倾向，而Tc，Ru，Rh和Pb则表现为Al占位倾向.通过对差分电荷密度、Mulliken轨道集居数以及态密度的分析表明Nb和Mo可以提高杂质元素与其近邻基体元素之间的相互作用和相应原子之间的键合强度，导致较强的固溶强化效应. 关键词： 密度泛函理论 第一性原理 电子结构     

Heusler合金Ni2MnSi的电子结构、磁性、压力响应及四方变形的第一性原理研究

运用基于密度泛函理论的第一性原理的投影扩充波函数（PAW）方法，计算了化学计量的Ni₂MnSi的晶体结构、磁性、电子结构、压力响应以及四方变形. 计算结果表明，在Ni₂MnSi的总磁矩中，Mn原子对总磁矩的贡献最大；Ni₂MnSi的总态密度的低能部分主要由Si-s投影态密度决定，高能部分主要由Ni-d，Mn-d和Si-p的投影态密度决定；Ni₂MnSi在四方变形中，在095<c/a<11 关键词： 第一性原理 电子结构 压力响应 四方变形     

Cr,Mo,Ni在$lt;i$gt;α$lt;/i$gt;-Fe（C）中占位、键合性质及合金化效应的第一性原理研究

基于密度泛函理论第一性原理方法,采用广义梯度近似下的PW91泛函形式,计算了合金元素Cr,Mo,Ni固溶于α-Fe（C）的电子结构,从晶格畸变、结合能、态密度、重叠布居及差分电荷密度等计算结果出发探讨了合金元素在α-Fe（C）中占位、键合性质及其合金化效应,结果表明：Cr优先占据铁素体晶胞顶角位置,而Mo,Ni 优先占据体心位置;Cr与晶胞的结合能最大,晶胞最稳定,Ni次之,Mo最低;Cr,Mo,Ni 在晶胞中都存在金属键、共价键和微弱离子键的共同作用,成键轨道主要是Cr3d与Fe3d,Mo4d与Fe3d,Ni3d与Fe3d,C2p的交互作用形成的;Cr与晶胞原子间的键合作用强,晶胞的稳定性好,对增强钢材的机械性能帮助较大,Ni的键合作用较弱,但还是能保持晶胞的稳定性,Mo虽然键合作用强,但反键作用也非常强,使晶胞的稳定性大大降低,对钢材的机械性能危害较大. 关键词： 第一性原理 α-Fe（C）')" href="#">α-Fe（C） 键合性质 合金化效应     

Nb掺杂影响NiTi金属间化合物电子结构的第一性原理计算

采用基于密度泛函理论(DFT)的第一性原理平面波超软赝势方法，计算了Nb元素掺杂对B2构型NiTi金属间化合物电子结构的影响.点缺陷生成能的计算结果表明，Nb原子掺杂后，NiTi中产生Ni原子和Ti原子空位和反位点缺陷所需要的能量均明显升高；态密度计算结果表明，Nb原子掺杂后与临近原子发生了明显的s-s, p-p和d-d电子相互作用，增加了与临近原子之间的电荷密度，有利于Nb与合金原子的成键.这些由Nb掺杂所导致的NiTi电子结构和键合特征的变化均有利于促进Nb与合金原子的相互作用，在一定程 关键词： NiTi金属间化合物 点缺陷 电子结构 第一性原理计算     

High-temperature site preference and atomic short-range ordering characteristics of ternary alloying elements in γ’-Ni3Al intermetallics

Abstract

Remarkable high-temperature mechanical properties of nickel-based superalloys are correlated with the arrangement of ternary alloying elements in L1₂-type-ordered γ′-Ni₃Al intermetallics. In the current study, therefore, high-temperature site occupancy preference and energetic-structural characteristics of atomic short-range ordering (SRO) of ternary alloying X elements (X = Mo, W, Ta, Hf, Re, Ru, Pt or Co) in Ni₇₅Al_21.875X_3.125 alloy systems have been studied by combining the statistico-thermodynamical theory of ordering and electronic theory of alloys in the pseudopotential approximation. Temperature dependence of site occupancy tendencies of alloying X element atoms has been predicted by calculating partial ordering energies and SRO parameters of Ni-Al, Ni-X and Al-X atomic pairs. It is shown that, all ternary alloying element atoms (except Pt) tend to occupy Al, whereas Pt atoms prefer to substitute for Ni sub-lattice sites of Ni₃Al intermetallics. However, in contrast to other X elements, sub-lattice site occupancy characteristics of Re atoms appear to be both temperature- and composition-dependent. Theoretical calculations reveal that site occupancy preference of Re atoms switches from Al to both Ni and Al sites at critical temperatures, T_c, for Re > 2.35 at%. Distribution of Re atoms at both Ni and Al sub-lattice sites above T_c may lead to localised supersaturation of the parent Ni₃Al phase and makes possible the formation of topologically close-packed (TCP) phases. The results of the current theoretical and simulation study are consistent with other theoretical and experimental investigations published in the literature.     

Site Preference and Alloying Effect of Excess Ni in Ni-Mn-Ga Shape Memory Alloys

The formation energies and electronic structures of Ni-rich Ni-Mn-Ga alloys have been investigated by firstprinciples calculations using the pseudopotential plane wave method based on density functional theory. The results show that the alloying Ni prefers to occupy the Mn site directly in Ni9Mn3Ga4 and to occupy the Mn site and drive the displaced Mn atom to the Ga site in NigMn4Ga3, which is in accordance with the experimental result. According to the lattice constants and the density of states analyses, these site preference behaviours are closely related to the smaller lattice distortion and the lower-energy electronic structure when the excess Ni occupies the Mn site. The effect of Ni alloying on martensitic transformation is discussed and the enhancement of martensitic transformation temperature by Ni alloying is estimated by the calculated formation energy difference between austenite and martensite phases.     

Effect of Cr on the electronic structure of Co3Al intermetallic compound: A first-principles study

The effect of doping with Cr on the electronic structure and magnetism of Co₃Al has been studied by density functional calculations. It has been found that the Cr atom has a strong site preference for the B-site in Co₃Al. With the substitution of Cr for Co, the total densities of states (DOS) change obviously: A DOS peak appears at E_F in the majority spin states and an energy gap is opened in the minority spin states. The effect of Cr in Co₃Al is mainly to push the antibonding peak of the Co (A,C) atoms high on the energy scale and to form the energy gap around E_F, and also to contribute to the large DOS peak at E_F in the majority spin direction. The calculations indicate a ferromagnetic alignment between the Co and Cr spin moments. The calculated total magnetic moment decreases and becomes closer to the Slater–Pauling curve with increasing Cr content. This is mainly due to the decrease of the Co (A,C) spin moments. At the same time, the moments of Co (B) and Cr (B) only change slightly.     

Elastic properties, thermal expansion coefficients and electronic structures of Ti0.75X0.25C carbides

Elastic properties, thermal expansion coefficients and electronic structures of Ti_0.75X_0.25C carbides (X=W, Mo, Ta, Nb, V, Hf, Zr, Cr and Al) were systematically investigated using ab initio density functional theory (DFT) calculations. The calculated elastic moduli, electronic structures and thermal expansion coefficients α(T) of pure TiC are in good agreement with experimental data and other DFT calculations. Based on a phenomenological formula, the trends of elastic properties and ductile/brittle behavior of Ti_0.75X_0.25C were analyzed. It was found that alloying elements W, Mo, Ta, Nb, V and Hf can increase elastic moduli, while Zr, Cr and Al reduce moduli. The nearly free electron model and Debye approximation were applied in the evaluation of α(T). The anharmonic effect was taken into account by including volume-dependent elastic moduli and Debye temperature. Results show that alloying additions of 3d V, 4d Zr and Mo slightly reduce α(T), while 3d Cr increases α(T), Al, 4d Nb, 5d Hf and W almost keep α(T) unchanged in Ti_0.75X_0.25C at high temperatures. The electronic structures of Ti_0.75X_0.25C were calculated and analyzed, and the electronic density of states was used to interpret variations of elastic properties and ductile/brittle behavior induced by alloying additions.     

Nb-Ti-Al合金高温氧化机理电子理论研究

采用递归法计算了Nb合金的电子态密度、原子镶嵌能、亲和能和团簇能等电子结构参数,研究Nb合金高温氧化机理.研究表明,氧在Nb合金表面的吸附能较低,易在合金表面吸附,并逐渐扩散到Nb合金的基体中.氧在合金基体中镶嵌能为负值,氧的态密度和Nb相似,在Nb中具有很高的溶解度.Ti,Al在合金晶内的镶嵌能均高于各自在合金表面的镶嵌能,Ti,Al从合金内部向合金表面扩散,最终在Nb合金表面偏聚,形成富Ti,Al的表层.团簇能计算结果表明Nb合金表面的Ti,Al原子各自均有聚集倾向,分别形成Ti和Al原子团.氧与合金     

Effect of alloying element on dislocation cross-slip in γ′-Ni3Al: a first-principles study

The effects of alloying elements Re, Ru, Ta, Ti, and W on the activation enthalpy of dislocation cross-slip in γ′-Ni₃Al are studied combining density functional theory calculations with the classical theory of dislocations. The elements Re and W are found to effectively increase planar fault energies on the (111) plane and decrease the cross-slip activation enthalpy in Ni₃Al. The reduction of activation enthalpy will increase the probabilities of cross-slipping and forming sessile dislocation locks. Therefore, Re and W can inhibit the further motion of dislocations and raise the flow stress of Ni₃Al in the anomalous temperature regime. The underlying electronic mechanism is the strong bonding of Re–Ni and W–Ni and the weak bonding of Re–Al and W–Al in fault areas.     

Site preference and thermodynamic properties of R3Ni13-xCoxB2（R=Y,Nd and Sm）

This paper investigates the structural stability of intermetallics R3Ni13-xCoxB2(R=Y,Nd and Sm) with Nd 3 Ni 13 B 2-type structure and the site preferences of the transition element Co by using a series of interatomic pair potentials.The space group remains unchanged upon substitution of Co for Ni in R3Ni13-xCoxB2 and the calculated lattice constants are found to agree with reports in literatures.The calculated cohesive energy curves show that Co atoms substitute for Ni with a strong preference for the 3g sites and the order of site preference is 3g,4h and 6i.Moreover,the total and partial phonon densities of states are first evaluated for the R 3 Ni 13 B 2 compounds with the hexagonal Nd 3 Ni 13 B 2-type structure.     

Mg,Al掺杂对LiCoO2体系电子结构影响的第一原理研究

为了研究Mg, Al掺杂对锂二次电池正极材料LiCoO₂体系的电子结构的影响，进而揭示Mg掺杂的LiCoO₂具有高电导率的机理，对Li(Co, Al)O₂和Li(Co, Mg)O₂进行了基于密度泛函理论的第一原理研究. 通过对能带及态密度的分析，发现在Mg掺杂后价带出现电子态空穴，提高了电导，并且通过歧化效应（disproportionation）改变了Co-3d电子在各能级的分布，而Al掺杂则没有这些作用. O关键词： 2')" href="#">LiCoO₂ 电子结构 第一原理 电导