Property enhancement of transparent conducting zinc oxide thin films—Effect of simultaneous (Sn+F) doping

Undoped and simultaneously (Sn+F) doped ZnO thin films were fabricated using a simplified spray pyrolysis technique and the effects of Sn doping level on their electrical, structural, optical and surface morphological properties were studied. The XRD patterns confirmed the hexagonal wurtzite structure of ZnO. The minimum electrical resistivity of 0.45×10⁻² Ω cm was obtained for ZnO films having Sn+F doping levels of 8+20 at%. All the films exhibited average optical transmittance of 85% in the visible region, suitable for transparent electrode applications. The overall quality of the fabricated films was confirmed from photoluminescence (PL) studies. The PL and surface morphological studies along with the elemental analysis showed the increase of Sn diffusion into the ZnO lattice which was consistent with the concentration of Sn in the starting solution. The results of the analysis of physical properties of simultaneously doped ZnO films proved that these films might be considered as promising candidates for solar cells and other opto-electronic applications.     

The structure and optical properties of AlN nanocrystals prepared by Schlenk techniques at atmospheric pressure and low temperature

AlN nanocrystals were prepared in organic solvent at atmospheric pressure and low temperature by the Schlenk technique. Both hexagonal and cubic AlN nanocrystals were obtained. The hexagonal nano-AlN powder possessed a wurtzite structure with a=3.124 Å, c=5.024 Å, the average grain size was about 2 nm. The lattice constant of the cubic nano-AlN was a=9.171 Å, the average grain size was about 4 nm. The structural and optical properties of the obtained AlN were analyzed. The emission related to deep-level defects was investigated by using temperature-dependent photoluminescence.     

Preparation and characterization of transparent NiO thin films deposited by spray pyrolysis technique

Nickel oxide thin films were successfully fabricated with various deposition time (t_d = 5, 10, and 15 min) on glass substrates using spray pyrolysis technique. The deposited films undergo thermal treatment at 350 °C for various annealing time (t_a = 0, 15, 30 and 60 min). In this study, the effect of t_d and t_a on film thickness was observed and their influence on structural, morphological and optical properties were investigated. The films deposited with t_d = 5 min showed amorphous structure while the films grown at higher deposition time became partially crystallized with preferred growth along (1 1 1) direction. Heat treatment carried out in air allowed us to tune the polycrystalline structure and the diffraction intensity at preferred peak increases with the increase in t_a which is a consequence of better crystallinity. This was reflected in the AFM micrographs of the films which suggested that the thermal annealing (or increasing t_a) facilitates the process of grain-growth, and improves the crystalline microstructure. The optical transmission of the films was found to vary with t_d and t_a and thus film thickness. The thinner films show higher transparency in the UV–vis spectral region. The optical band gap was blue-shifted from 3.35 eV to 3.51 eV depending on t_a. The effect of t_a on the various optical constants of the NiO films has also been discussed.     

Preparation of ZnO-doped Al films by spray pyrolysis technique

Al-doped zinc oxide (AZO) thin films have been prepared by spray pyrolysis (SP) technique of zinc acetate and aluminium nitrate, and the effect of thickness on structural and optical properties has been investigated. The structural and optical characteristics of the AZO films were examined by X-ray diffraction (XRD) and double-beam spectrophotometry. These films, deposited on glass substrates at an optimal substrate temperature (T_S = 450 °C), have a polycrystalline texture with a hexagonal structure. Transmission measurements showed that for visible wavelengths, the AZO films have an average transmission of over 90%. The optical parameters have been calculated. The dependence of the refractive index, n, and extinction coefficient, k, on the wavelength for the sprayed films is also reported. Optical band gap of AZO is 3.30 and 3.55 eV, respectively, depending on the film thicknesses.     

Structural, morphological and optical properties of CuAlS2 films deposited by spray pyrolysis method

The structural, morphological and optical properties of CuAlS₂ films deposited by spray pyrolysis method have been investigated. CuAlS₂ in the form of films is prepared at different deposition conditions by a simple and economical spray pyrolysis method. The structural, surface morphology and optical properties of the films were analyzed by X-ray diffraction (XRD), scanning electron microscope (SEM), atomic force microscope (AFM) and absorbance spectra, respectively. The films were polycrystalline, crystallized in a tetragonal structure, and are preferentially orientated along the (1 1 2) direction. Grain size values, dislocation density, and d% error of CuAlS₂ films were calculated. The optical band gap of the CuAlS₂ film was found to be 3.45 eV. The optical constants such as refractive index, extinction coefficient and dielectric constants of the CuAlS₂ film were determined. The refractive index dispersion curve of the film obeys the single oscillator model. Optical dispersion parameters E_o and E_d developed by Wemple-DiDomenico were calculated and found to be 3.562 and 12.590 eV.     

Diagnostic study of the roughness surface effect of zirconium on the third-order nonlinear-optical properties of thin films based on zinc oxide nanomaterials

Zinc oxide (ZnO) and zirconium doped zinc oxide (ZnO:Zr) thin films were deposited by reactive chemical pulverization spray pyrolysis technique on heated glass substrates at 500 °C using zinc and zirconium chlorides as precursors. Effects of zirconium doping agent and surface roughness on the nonlinear optical properties were investigated in detail using atomic force microscopy (AFM) and third harmonic generation (THG) technique. The best value of nonlinear optical susceptibility χ⁽³⁾ was obtained from the doped films with less roughness. A strong third order nonlinear optical susceptibility χ⁽³⁾ = 20.12 × 10⁻¹² (esu) of the studied films was found for the 3% doped sample.     

Langmuir-Blodgett films of hydrophobins HFBI and HFBII

Hydrophobins are small fungal proteins, which have remarkable surface-chemical properties. They self-assemble at hydrophobic/hydrophilic interfaces and work as adhesive agents and coatings. Sixteen layer Langmuir-Blodgett films of hydrophobins HFBI and HFBII from the fungus Trichoderma reesei were prepared and studied using grazing-incidence X-ray diffraction and reflectivity techniques. Both kind of films contain hexagonally ordered crystallites on the substrate with unit cell parameters of a = b = 54 Å (HFBI) and a = b = 55 Å (HFBII). The structure is similar to the structure of monolayer Langmuir-Blodgett films.     

Annealing effect on CdS/SnO2 films grown by chemical bath deposition

The extensive investigation of the annealing effect in nitrogen atmosphere on the structural optical and electrical properties of chemically deposited CdS films on SnO₂ has been performed. The as-deposited film shows 2.45 eV band gap (E_g) and decreases with increasing annealing temperature. The film annealed at 623 K having pure hexagonal phase (a = 4.14 Å, c = 6.71 Å for [1 0 0] plane) and E_g = 2.36 eV shows 10 times higher conductivity for all temperature range, and shows two different activation energies E_a = 0.114 eV and E_a = 0.033 eV for the temperature range 395 K ≤ T ≤ 515 K and 515 K ≤ T ≤ 585 K, respectively. The structural parameters such as dislocation density, strain and optical parameters such as absorption and extinction coefficient are calculated and compared for all the films.     

Preparation and properties of spray-deposited ZnIn2Se4 nanocrystalline thin films

Zinc indium selenide (ZnIn₂Se₄) thin films have been deposited onto amorphous and fluorine doped tin oxide (FTO)-coated glass substrates using a spray pyrolysis technique. Aqueous solution containing precursors of Zn, In, and Se has been used to obtain good quality deposits at different substrate temperatures. The preparative parameters such as substrate temperature and concentration of precursors solution have been optimized by photoelectrochemical technique and are found to be 325 °C and 0.025 M, respectively. The X-ray diffraction patterns show that the films are nanocrystalline with rhombohedral crystal structure having lattice parameter a=4.05 Å. The scanning electron microscopy (SEM) studies reveal the compact morphology with large number of single crystals on the surface. From optical absorption data the indirect band gap energy of ZnIn₂Se₄ thin film is found to be 1.41 eV.     

Growth and characterization of a novel organic nonlinear optical material: l-alanine 2-furoic acid

l-alanine 2-furoic acid (LA2FA), a novel organic third order nonlinear optical material was grown by slow solvent evaporation technique at room temperature. The grown single crystals were characterized by XRD, spectral, thermal, optical, dielectric and third order nonlinear properties. LA2FA crystallizes into triclinic system with the space group P1. The cell parameters are found to be a = 3.97 Å, b = 7.09 Å, c = 10.69 Å, α = 73.61°, β = 83.57°, γ = 84.21° and V = 286 Å3. The modes of vibrations of different molecular groups present in LA2FA were identified by FTIR studies. The optical transparency of the grown crystals was investigated by UV–visible spectrum. The absorption spectrum reveals that the crystal has a high UV cut off of 245 nm and photonic band gap of 2.5 eV. The scanning electron microscope (SEM) study has been carried out to determine the surface morphology of the grown crystal. The thermal behavior of the crystal investigated using thermo gravimetric (TG) and differential thermal analysis (DTA) indicates that the material does not decompose before melting. The third order NLO property was studied in detail by z-scan technique.     

Structural and optical properties of YSZ thin films grown by PLD technique

We report on the structural and optical properties of yttria stabilized zirconia (YSZ) thin films grown by pulsed laser deposition (PLD) technique and in situ crystallized at different substrate temperatures (T_s = 400 °C, 500 °C and 600 °C). Yttria-stabilized zirconia target of ∼1 in. diameter (∼95% density) was fabricated by solid state reaction method for thin film deposition by PLD. The YSZ thin films were grown on an optically polished quartz substrates and the deposition time was 30 min for all the films. XRD analysis shows cubic crystalline phase of YSZ films with preferred orientation along 〈1 1 1〉. The surface roughness was determined by AFM for the films deposited at different substrate temperatures. The nano-sized surface roughness is found to increase with the increase of deposition temperatures. For the optical analysis, a UV-vis-NIR spectrophotometer was used and the optical band gap of ∼5.7 eV was calculated from transmittance curves.     

Structural characterization of thermally evaporated Bi2Te3 thin films

Thermally evaporated Bi₂Te₃ thin films were deposited on glass substrates. X-ray diffraction study confirmed that the growned films are polycrystalline in nature having hexagonal structure. The film exhibits preferential orientation along the [0 1 5] direction for the films of all thickness together with other abundant planes [0 1 1 1] and [1 1 0]. Various structural parameters such as lattice constants, crystallite size, strain, and dislocation density have been calculated and they are found to be thickness dependent. The lattice parameters are found to be a=4.38 Å and c=30.40 Å. The grain size of the films increases with thickness as the dislocation density and the microstrain decreases with thickness. The mean bond energy and the average coordination number of Bi₂Te₃ thin film are found to be 1.72 eV and 2.4, respectively.     

Growth, structural and optical properties of non-stoichiometric CuIn(S1−xSex)2 thin films deposited by solution growth technique for photovoltaic application

Polycrystalline thin films of p-CuIn(S_1−xSe_x)₂ have been deposited by a solution growth technique. The deposition parameters such as pH, temperature and time have been optimized. In order to achieve uniformity of thin film, triethanolamine (TEA) has been used. As deposited films have been annealed at 450 °C in air for 5 min. The surface morphology, compositional ratio, structural properties have been studied by SEM, EDAX and XRD technique, respectively. It has been found that films have chalcopyrite structure with the lattice parameters a=5.28 Å and c=11.45 Å at composition x=0.5. The grain size of all composition x measured from SEM and XRD is varied in between 450 and 520 nm. The optical transmittance spectra have been recorded in the range 350-1000 nm. The absorption coefficient has been calculated at the absorption edge for each of the composition x and it is in the range of 10⁴ cm⁻¹. The material shows the direct allowed band gap, which varies from 1.07 to 1.44 eV with change in composition (0≤x≤1.0). These parameters are useful for the photovoltaic application.     

Studies on the optical and mechanical properties of organic nonlinear optical 1-(4-fluorostyryl)-4-nitrostilbene (FNS) single crystal

A new organic nonlinear optical material 1-(4-fluorostyryl)-4-nitrostilbene (FNS) has been synthesized and single crystals of FNS were grown using solvent evaporation solution growth technique (SESGT) by 2-butanon solvent. Single crystal x-ray diffraction analysis reveals the unit cell parameters of the grown crystal are a = 9.494(4) Å, b = 9.864(2) Å, c = 19.501(7) Å and it belongs to monoclinic system with noncentrosymmetric space group. Optical transmittance of the grown crystal has been studied by UV-Vis-NIR spectrum. The optical properties of FNS have been studied by means of optical transmittance measurements in the wavelength range of 190–1100 nm The optical constants were calculated from the optical transmittance (T) data such as refractive index (n), extinction coefficient (k) and reflectance (R). The optical band gap (E_g) of FNS is 3.27 eV with direct transition. The complex dielectric (?) constant of the grown FNS crystal was determined. The second harmonic generation (SHG) efficiency of the grown FNS crystal has been studied by using Kurtz-Perry powder technique and it shows 12 times relatively greater than KDP.     

Effect of indium doping in CdO thin films prepared by spray pyrolysis technique

Preparation of transparent and conducting indium doped CdO thin films by spray pyrolysis on glass substrate is reported for various concentration of indium (2-8 wt%) in the spray solution. The electrical, optical and structural properties of indium doped CdO films were investigated using different techniques such as Hall measurement, optical transmission, X-ray diffraction and scanning electron microscope. X-ray analysis shows that the undoped CdO films are preferentially orientated along (2 0 0) crystallographic direction. Increase of indium doping concentration increases the films packing density and reorient the crystallites along (1 1 1) plane. A minimum resistivity of 4.843×10⁻⁴ Ω cm and carrier concentration of 3.73×10²⁰ cm⁻³ with high transmittance in the range 300-1100 nm were achieved for 6 wt% indium doping. The band gap value increases with doping concentration and reaches a maximum of 2.72 eV for 6 wt% indium doping from 2.36 eV of that of undoped film. The minimum resistivity achieved in the present study is found to be the lowest among the reported values for In-doped CdO films prepared by spray pyrolysis method.     

Optical,spectral and thermal properties of organic nonlinear optical single crystal: 2,3-Dimethoxy-10-oxostrychnidinium hydrogen oxalate dihydrate

The potential organic nonlinear optical single crystal of 2,3-dimethoxy-10-oxostrychnidinium hydrogen oxalate dihydrate has been grown by slow evaporation solution growth technique (SEST) using ethanol–water solution at room temperature. The powder X-ray diffraction study reveals that the crystal belongs to orthorhombic system with non-centrosymmetric space group P2₁2₁2₁ and the cell parameters are a = 7.61 Å, b = 10.73 Å, c = 29.49 Å, V = 2410.75 Å³. The functional groups of the synthesized compound have been identified by FT-Raman and FTIR analyses. Photoluminescence spectroscopy study is determined to explore its efficacy towards device fabrications. Birefringence measurement has been carried out in order to analyze the optical homogeneity of the grown crystal. The optical constants such as reflectance (R) and extinction coefficient (K) have been determined from the transmittance data. The relative second harmonic efficiency of the compound is found to be 4 times greater than that of KDP. DTA-DSC measurements indicate that the crystal is thermally stable up to 174 °C.     

Thermal annealing effect of on optical constants of vacuum evaporated Se75S25−xCdx chalcogenide thin films

Chalcogenide glasses are interesting materials due to their infrared transmitting properties and photo induced effects exhibited by them. Thin films with thickness of 3000 Å of the glasses Se₇₅S_25−xCd_x with x=6, 8 and 10 at% prepared by melt quench technique were evaporated by thermal evaporation onto glass substrates under a vacuum of 10⁻⁶ Torr. The optical constants (absorption coefficient, refractive index and extinction coefficient) of as-prepared and annealed films have been studied as a function of photon energy in the wave length region 400-1000 nm. Analysis of the optical absorption data shows that the rule of non-direct transitions predominates. It has been found that the absorption coefficient and optical band gap increase with increasing annealing temperatures. The refractive index (n) and the extinction coefficient (k) were observed to decrease with increasing annealing temperature.     

Synthesis, growth, and characterization of a non-linear optical crystal-glycine lithium chloride

A new non-linear optical material, glycine lithium chloride, was synthesized and single crystals were grown by slow evaporation solution growth technique at constant temperature from its aqueous solution. Transparent and well-crystallized hexagonal prisms were obtained by controlled evaporation at a constant temperature of 45 °C. The grown crystals were characterized by X-ray diffraction methods, Fourier transforms infrared spectroscopy, and optical absorption spectrum. Single crystal X-ray diffraction analysis revealed that the crystal lattice of glycine lithium chloride is hexagonal with unit cell a = b = 7.023 Å, c = 5.478 Å, α = β = 90°, γ = 120°, V = 234 Å³. The dielectric response of the crystal with varying frequencies was studied. The second harmonic generation efficiency of the crystal was studied and is found to be larger than KDP.     

Influence of aging time of the starting solution on the physical properties of fluorine doped zinc oxide films deposited by a simplified spray pyrolysis technique

Fluorine doped zinc oxide (FZO) films were fabricated from fresh and aged (4, 8, 12 and 16 days) starting solutions using a simplified and low cost spray pyrolysis technique. The X-ray diffraction study showed that the preferential orientation is along the (0 0 2) plane for all the films irrespective of the age of the solution. The crystallite size calculated using the Scherrer’s formula is comparatively smaller only for the film prepared from the starting solution having aging time 4 days which may be due to the efficient incorporation of fluorine atoms into the ZnO lattice. This phenomenon is confirmed by the minimum resistivity value (3.14 × 10⁻² Ω cm) obtained in this particular case. The visible transmittance and the optical band gap values are found to be in the range of 63–83% and 3.20–3.31 eV, respectively. The optical transmittance is found to decrease gradually as the aging time of the solution increases and the optical band gap is found to be slightly higher in the case of the film prepared from the fourth day solution. The scanning electron microscopy results depicted that the microstructure of ZnO:F films are largely influenced by the aging of the starting solution.     

Structural and superconducting properties of ion beam sputtered Nb thin films and Nb/Cu bilayers

We present the results of a study of structural and superconducting properties of polycrystalline Nb thin films (200 Å, 300 Å, 400 Å, 700 Å and 1000 Å) and Nb/Cu bilayers (300 Å/300 Å and 400 Å/300 Å) prepared on Si substrates by ion beam sputtering at room temperature. The thicknesses, roughnesses at the surfaces and interfaces were determined by X-ray reflectivity whereas the grain sizes were determined from grazing incidence X-ray diffraction and transmission electron microscopic studies. The superconducting transition temperature (T_C) of Nb thin films are smaller than T_C of bulk Nb. The Nb-200 Å sample does not show T_C down to 2.3 K. The average size of the grains varies from 42 Å for Nb-200 Å sample to 69 Å for Nb-1000 Å sample. Our results show that the T_C in these polycrystalline films is not only limited by its thickness but also by the size of the grains. The Nb films deposited in situ on the Cu layer (Nb/Cu) show a marginal increase in average sizes of the grains as compare to their respective values in Nb films of same thicknesses. As a result a marginal increase in T_C of these films is also observed. The maximum decrease in T_C due to oxygen intake during deposition should be about 0.5 K from its bulk value (9.28 K). We have attributed the large decrease in T_C in our case on the basis of decrease in the Debye temperature and density of states at the Fermi level for Nb thin films as compared to their respective values for bulk Nb.